X-Fi remote & XP Media Cen

Hi there...
Does any one know if the X-Fi platinuim with the remote works in Media Centre...
And deos anyone have any idea what could be going on with my remote in applications other creatives programs... the pause button deosnt work in powerdvd, or windows media player...
Asus A8N32-SLi Deluxe
AMD X2 3800+
GB Ram
Asus N7800GT Etreme
Creative X-Fi Platinum
Antec P80
Antec 500W smart power

I have yet to try the original Entertainment Centre on my x64 Vista but surely it would require x64 drivers of some sort for the actual dri've bay that detects the remote control's signal? I assumed that Creative haven't implemented this capability into their current driver set?Has anyone actually got Entertainment Centre working coreectly on x64 Vista? (I'm useing everything else on the YouP-Pax download now).

Similar Messages

Audigy NX Remote & Windows Media Cen

Im lolking for Audigy NX but someone can tell me that can i use the remote of Audigy NX to control Windows Media Center.
Thanks!

As far as I'm aware MCE isn't officially supported, I presume you are installing the standard XP drivers/CD, is that correct?
Just to rule out a simple problem, can you check if there is a light from the optical output (when you remove the little black button cover)? If there isn't, it means that either there is no power to the dri've, or that there might be a hardware problem. Check there are two cables going to the dri've, one is the flat grey cable from the card, and the other is a little power cable (like you would connect to a floppy dri've).
Cat

Communication between Lync - Mediant . 488 evt from mediant site when SBC Remote Early Media RTP parameter is set to Delayed

Hi,
I have a problem with Early Media functionality between Lync and Mediant 1000 E-SBC. If SBC Remote Early Media RTP parameter is set to Delayed (on IP Profile Settings level) i cannot establish connection. After receiving 183 Session progress (from Lync site)
call is released with 488 event (488 is sent from mediant site). Before "Not applicable here" in logs i can see:
6d:9h:46m:35s (      lgr_flow)(18219     ) #MediaResourcesConnector::AllocateMediaResources
(lgr_media_connector)(18220     ) MediaResourcesConnector:CalculateResourcesForAppExtensions Leading:DSP Opposite:NONE MediationLevel:NONE
(lgr_media_service)(18221     ) ServicesMngr: Allocate Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18222     ) !! [ERROR] ServicesMngr: Cannot allocate more Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18261     ) (#292) ChannelResource Deallocated.
6d:9h:46m:35s (lgr_media_service)(18262     ) (#293) ChannelResource Deallocated.
I need this because if im using SBC Remote Early Media RTP = Immidiately i cannot hear ringtone. Could someone give me any clues what is wrong in config?
I enclosed detailed logs:
Log is Activated 6d:9h:46m:35s (       lgr_sbc)(18057     ) (#51) SBCRoutesIterator Allocated.
(       lgr_sbc)(18058     ) Classification Succeeded - Source IP Group #2.
(       lgr_sbc)(18059     ) CallAdmission::AddDialog: Type INVITE Direction In IP group 2: 1 SRD 2: 1 SRD ovflw:1 used unres:1
(      lgr_flow)(18060     ) (#51)SBCRoutesIterator::Change State From: InitialRouting To : AlternativeRouting
(       lgr_sbc)(18061     ) CallAdmission::AddDialog: Type INVITE Direction Out IP group 1: 1 SRD 1: 1 SRD ovflw:1 used unres:2
(      lgr_flow)(18062     ) (#51)SBCRoutesIterator::Next route found: Route by: IPGroup , IP Group ID: 1, Live:1
(       lgr_sbc)(18063     ) Routing Succeeded -IP2IPRouting Rule #2.
(      lgr_flow)(18064     ) ---- Incoming SIP Message from switch:5060 to SIPInterface #2 UdpTransportObject[#2] ----
6d:9h:46m:35s INVITE sip:1234@Mediant;user=phone SIP/2.0
Allow: INVITE, ACK, CANCEL, BYE, PRACK, NOTIFY, REFER, SUBSCRIBE, OPTIONS, UPDATE, INFO
Supported: replaces,timer,path,100rel
User-Agent: OmniPCX Enterprise R10.1.1 j2.603.33.a
Session-Expires: 1800;refresher=uac
Min-SE: 900
P-Asserted-Identity: "TPSA 12" <sip:221111111@switch;user=phone>
Content-Type: application/sdp
To: <sip:1234@Mediant;user=phone>
From: "TPSA 12" <sip:221111111@switch;user=phone>;tag=434636a077aeb3418ef3d5c0887debbd
Contact: <sip:221111111@switch;transport=UDP>
Call-ID: 5050e7eb34568795c049d14a6b088172@switch
CSeq: 1290334631 INVITE
Via: SIP/2.0/UDP switch;branch=z9hG4bK668ced008893ef177292c6f0f662ca02
Max-Forwards: 70
Content-Length: 265
v=0
o=OXE 1415263596 1415263596 IN IP4 switch
s=abs
c=IN IP4 172.16.20.32
t=0 0
m=audio 32156 RTP/AVP 8 4 97
a=sendrecv
a=rtpmap:8 PCMA/8000
a=ptime:20
a=maxptime:30
a=rtpmap:4 G723/8000
a=ptime:30
a=maxptime:30
a=rtpmap:97 telephone-event/8000
(     sip_stack)(18066     ) New SIPMessage created - #57
(     sip_stack)(18067     ) New SIPSBCCallLeg created - #1695
6d:9h:46m:35s (     sip_stack)(18068     ) New AcSIPCall created - #1922
(     sip_stack)(18069     ) AcTransactionUser::AddMessageToQueue: Queueing message
6d:9h:46m:35s (     sip_stack)(18102     ) SIPCall(#1922) changes state from Idle to Invited
6d:9h:46m:35s (     sip_stack)(18164     ) SIPCall(#1921) changes state from Idle to Inviting
(     sip_stack)(18165     ) SIPSessionTimer<TU#1921>::FillSTRequestData - Session-Timer mode: TRANSPARENT
(      lgr_flow)(18166     ) ---- Outgoing SIP Message to Lync2:5068 from SIPInterface #1 TcpTransportObject[#648] ----
6d:9h:46m:35s (      lgr_flow)(18178     ) ---- Incoming SIP Message from Lync2:5068 to SIPInterface #1 TcpTransportObject[#648] ----
SIP/2.0 183 Session Progress
FROM: "TPSA 12"<sip:221111111@switch;user=phone>;tag=1c1656521459
TO: <sip:1234@Mediant;user=phone>;tag=499c98c8cd;epid=DE8F26F104
CSEQ: 1 INVITE
CALL-ID: 1656462877611201494635@Mediant
VIA: SIP/2.0/TCP Mediant:5068;branch=z9hG4bKac1657277504;alias
CONTACT: <sip:lyfe02.grupa.lukas:5068;transport=Tcp;maddr=Lync2>
CONTENT-LENGTH: 281
CONTENT-TYPE: application/sdp
ALLOW: CANCEL
ALLOW: BYE
ALLOW: UPDATE
ALLOW: PRACK
REQUIRE: 100rel
SERVER: RTCC/5.0.0.0 MediationServer
Rseq: 1
v=0
o=- 89 1 IN IP4 Lync2
s=session
c=IN IP4 Lync2
b=CT:1000
t=0 0
m=audio 52882 RTP/AVP 8 97
c=IN IP4 Lync2
a=rtcp:52883
a=label:Audio
a=sendrecv
a=rtpmap:8 PCMA/8000
a=rtpmap:97 telephone-event/8000
a=fmtp:97 0-16
m=audio 0 RTP/SAVP 8 4 97
(     sip_stack)(18180     ) New SIPMessage created - #55
(      lgr_flow)(18181     ) |       |(SIPTU#1921)183 State:Proceeding(1656462877611201494635@Mediant)
6d:9h:46m:35s (   lgr_stk_ses)(18182     ) |       |       |       #1694:SIP_ALERT_EV(1656462877611201494635@Mediant)
(     sip_stack)(18183     ) SDPBody::New - id = 126
(     sip_stack)(18184     ) SDPBodyMedia::New - id = 541
(     sip_stack)(18185     ) SDPBodyMedia::New - id = 540
(     sip_stack)(18186     ) <BaseSIP SDPSESSION #1694> UpdateChosenMediaByCN - CN as Remote -1
(     sip_stack)(18187     ) SDPBodyMedia::New - id = 539
(     sip_stack)(18188     ) SDPBodyMedia::New - id = 538
(   lgr_stk_ses)(18189     ) SBCOfferAnswerMngr(#1694) changes state from SIP_MEDIA_OFFERING to SIP_MEDIA_COMPLETED
(   lgr_stk_ses)(18190     ) <SESSION #1694> SendToCall - event: MEDIA_NEGOTIATION_COMPLETED_EV m_Call#1852
(      lgr_flow)(18191     ) |       |       (#1852)SBCCall <- (#1694)SIPSBCCallLeg: MEDIA_NEGOTIATION_COMPLETED_EV
(      lgr_flow)(18192     ) |       (#59)SBCCallPlacementFeature <- (#1852)SBCCall: MEDIA_NEGOTIATION_COMPLETED_EV
(      lgr_flow)(18193     ) |       (#1853)SBCParticipantEndPoint <- (#59)SBCCallPlacementFeature: MEDIA_NEGOTIATION_COMPLETED_EV
6d:9h:46m:35s (      lgr_flow)(18219     ) #MediaResourcesConnector::AllocateMediaResources
(lgr_media_connector)(18220     ) MediaResourcesConnector:CalculateResourcesForAppExtensions Leading:DSP Opposite:NONE MediationLevel:NONE
(lgr_media_service)(18221     ) ServicesMngr: Allocate Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18222     ) !! [ERROR] ServicesMngr: Cannot allocate more Media channel. current active: 0 and max is: 0
6d:9h:46m:35s (lgr_media_service)(18261     ) (#292) ChannelResource Deallocated.
6d:9h:46m:35s (lgr_media_service)(18262     ) (#293) ChannelResource Deallocated.
6d:9h:46m:35s (      lgr_flow)(18263     ) |       |       (#1853)SBCCall <- (#1695)SIPSBCCallLeg: RELEASE_EV
(      lgr_flow)(18264     ) |       |       (#1853) SBCCall changing states from:AlertingState to:DisconnectingState
(      lgr_flow)(18265     ) |       (#1852)SBCParticipantEndPoint <- (#1853)SBCCall: RELEASE_EV
(      lgr_flow)(18266     ) (#1852) SBCParticipantEndPoint changing states from:InitiatedState to:ReleaseingState
(      lgr_flow)(18267     ) (#1035)SBCController <- (#1852)SBCParticipantEndPoint: RELEASE_EV
(      lgr_flow)(18268     ) |       |       (#1035) SBCController changing states from:EstablishingState to:DisconnectingState
(      lgr_flow)(18269     ) |       (#1853)SBCParticipantEndPoint <- (#1035)SBCController: RELEASE_EV
(      lgr_flow)(18270     ) (#1853) SBCParticipantEndPoint changing states from:InitiatedState to:ReleaseingState
(      lgr_flow)(18271     ) |       (#59)SBCCallPlacementFeature <- (#1853)SBCParticipantEndPoint: RELEASE_EV
(      lgr_flow)(18272     ) (#59) SBCCallPlacementFeature changing states from: Initiated to: Releasing
6d:9h:46m:35s (      lgr_flow)(18273     ) |       |       (#1852)SBCCall <- (#59)SBCCallPlacementFeature: RELEASE_EV
(      lgr_flow)(18274     ) |       |       (#1852) SBCCall changing states from:AlertingState to:DisconnectingState
(      lgr_flow)(18275     ) |       |       |       (#1694)SIPSBCCallLeg <- (#1852)SBCCall: RELEASE_EV
(     sip_stack)(18276     ) New SIPMessage created - #52
(      lgr_flow)(18277     ) |       |(SIPTU#1921)DISCONNECT_REQ State:Proceeding(1656462877611201494635@Mediant)
(     sip_stack)(18278     ) New SIPMessage created - #49
(      lgr_flow)(18279     ) ---- Outgoing SIP Message to Lync2:5068 from SIPInterface #1 TcpTransportObject[#648] ----
CANCEL sip:1234@Mediant;user=phone SIP/2.0
Via: SIP/2.0/TCP Mediant:5068;branch=z9hG4bKac1657277504;alias
Max-Forwards: 70
From: "TPSA 12" <sip:221111111@switch;user=phone>;tag=1c1656521459
To: <sip:1234@Mediant;user=phone>;epid=DE8F26F104
Call-ID: 1656462877611201494635@Mediant
CSeq: 1 CANCEL
User-Agent: E-SBC/v.6.60A.260.002
Reason: SIP ;cause=488 ;text="488 Not Acceptable Here"
Content-Length: 0
(     sip_stack)(18281     ) Resource SIPMessage deleted - #49
6d:9h:46m:35s (     sip_stack)(18354     ) New SIPMessage created - #42
(     sip_stack)(18355     ) Resource SIPMessage deleted - #42
(      lgr_flow)(18356     ) |       | TransactionUserMngr::ReturnTransactionUser - #1921
(     sip_stack)(18357     ) SIPCall(#1921) changes state from Disconnected to Idle
6d:9h:46m:40s (     sip_stack)(18358     ) New SIPMessage created - #47
(     sip_stack)(18359     ) Resource SIPMessage deleted - #47
(      lgr_flow)(18360     ) |       | TransactionUserMngr::ReturnTransactionUser - #1922
(     sip_stack)(18361     ) SIPCall(#1922) changes state from Disconnected to Idle

Hi,
On Mediant 1000 E-SBC SBC tab, when set Remote Early Media RTP Behavior to
Delayed, but also check if the following configuration set correctly:
SBC Media Security Behavior: SRTP
PRACK Mode: Optional
Remote Update Support: Supported Only After Connect
Remote Re-INVITE: Supported Only With SDP
Remote Delayed Offer Support: Not Supported
Remote REFER Behavior: Handle Locally
Remote 3xx Behavior: Handle Locally
Enforce MKI Size: Enforce
You can refer this
link
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Remote control (media) for Pavilion G6S?

Can you recommend for a remote control (media) for Pavilion G6S?

Hi
> I didn't found any driver for the A500 anyway, even for Vista...
It looks like the A500 is very new on the market and I believe the drivers (Vista) will be released in the next time
You will have to wait a little bit
I think that the Vista driver would be compatible with the Win 7.
I have installed Win 7 on my notebook and most of the vista drivers are working.

How to use iMac as remotely accessible media server

First time poster, and thanks in advance for any help that any of you might be able to provide. -- Josh
I have a mid-2007 iMac, several AppleTVs and Apple mobile devices, and a 2014 Macbook Pro coming at the end of the week (more detailed info below). I have a roughly 1 TB library of movies, which are currently housed in an external hard drive attached to the iMac. When I'm on my home network, I'm able to stream all the movies to all of the AppleTVs, iPhones, and iPads, using iTunes and home sharing, with almost no problem. But, my family would like to access our movie library remotely, when at the airport, visiting family, etc.
I've researched various options, and am having a hard time parsing through some of the more technical information and figuring out what setup would work best. It seems to me that although I can't use my iMac as a second display for the new MacbookPro because of technical limitations on the iMac, I might still be able to use the iMac as a remotely accessible home media server. Running Plex on the iMac has been suggested, but I keep hearing conflicting information on whether the AppleTVs are compatible with Plex, and I've had trouble successfully forwarding ports several years ago when I played with Plex briefly. iTunes/home sharing is just so easy in terms of setup and reliability between Apple devices, in my experience. I looked into buying an AirPort Time Capsule, since I was looking into upgrading my router to support 802.11ac anyway (advice on that too?), but was told that neither the Time Capsule drive nor any drive attached to it would be remotely accessible. Back to my Mac seems like it might work for me to access my library remotely when using the MacbookPro, but not any of the mobile devices (which are more important to the kids), and I'm not sure what advantage a NAS drive would have over using the iMac (although this is where it starts getting a bit technical for me). Looked at OSX Server also, but not sure how that would interface with whatever additional components I need to get.
Thank you in advance for any help. I'm sure people have figured out a way to access their media libraries remotely, but for some reason I can't find a straight answer on how. I've included additional technical details about my setup below. Thanks again!!
iMac, 20-in, Mid 2007, 2 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.4, 250 GB storage
Macbook Pro w. Retina, 13-in, 2014, 2.6 GHz Dual-core Intel Core i5, 16 GB 1600 MHz DDR3L SDRAM, 128 GB PCle-based Flash Storage
Iomega HDD, 2 TB
Netgear N600 Wireless Dual Band Router, Model No. WNDR3400v2
AppleTV, 3rd generation (x3)
iPhone 5, iPhone 4s, iPad (2nd gen), iPad mini w. Retina

My apologies if this isn't quite on point. I hope it is of some use.
One problem that may arise is that many home internet connections have much less outbound bandwidth available than inbound, at least in the US. That is, while your internet connection probably supports receiving a movie in real time, it may not support sending one in real time.
Portable 1TB and 2TB disks are pretty affordable these days. A number even do wifi streaming to iPhones and iPads.

RM-900 and Windows Media Cen

Can I use the old remote-control RM-900 (came with Audigy Platinum) as a remote-control for Windows Media Center?

Absolutely....just search around these forums and you will find your answer. That is all I am allowed to say.

Remote vod media

I've got an fms server setup and have been currently streaming a few mp4 files from the default vod directory in c:\program files\adobe\flash media server 3.5\applications\vod\media. I'm trying to find the best way to be able to store my mp4 files in a different directory. I found that by editing the VOD_COMMON_DIR entry in fms.ini I was able to now store the mp4 files in a different local directory (C:\temp\vod).
But what I really want to do is store my files on a remote computer on our local area network. Does anyone know if this is possible? When I set VOD_COMMON_DIR to \\myremotecomputer\temp\vod the default flash player can no longer stream my mp4 files. I have ensured that this directory is shared. I have also tried mapping the network drive to N:\ and setting VOD_COMMON_DIR to N:\temp\vod, but no success. Can anyone help?

Thanks, that helped also found lots of useful knowledge on this thread
http://forums.adobe.com/message/844512#844512
It turns out my FMS server service didn't have the correct permissions to access the network drive.

Msi mega 180 remote in media center 3

woundering if this is correct or i am having problems
the remote doesnt work at all in windows with the media center but it works in the hi-fi mode.... is this right that the remote dont work in windows or it is just me?
thanks

ok
before i didnt know it needed to be running for the remote to work so i disabled it in the system tray but now i enabled it again but it doesnt work still
and yes i have WinDVD 7 installed which did replace the old Wincinema program cuz i cant find the old one in the msconfig so now wat am i suppose to do?
do i have to uninstall both and install windvd7 1st then media center after?
thanks

Remote Access Media Not Working correctly

I just installed the newly released Media Plugin for Essentials Server 2012 R2. I was really hoping this would solve the problems I had with first version of Essentials 2012. The media worked fine on Windows Home Server 2011, but I've never been able to
access the folders successfully since installing the new version last year.
I get the above error when I try and access my pictures folder and an empty video folder. This was the same error I had in the previous version. There are raw formatted pictures in this folder that I'm just archiving, but I'm not sure if that would cause
the issue or not.
This is the error I receive when I try to access my Music. I only put in four folders with music and I can see the folders if I access them via the shared folders interface, but I was hoping to stream the music and not download the files. I then simply put
some mp3 files in the folder, but those were not seen either.
I know others had issues with the last version and at one time the "marked answer" was weird files in the folders, but no clarification was given. Are there any ideas out there on how to set this up properly? I'd really love to have this feature
work. It's probably the feature I miss most from Windows Home Server 2011.

I didn't notice any errors in the log. I will post it below. I restarted the service and it is running.
I'd love to get this working:
Setup.exe Information: 0 : Launching GUI...
    ThreadId=1
    DateTime=2013-10-23T02:03:16.8596601Z
Setup.exe Information: 0 : GetVersionEx returns 6.3.9600 (SP 0.0).
    ThreadId=3
    DateTime=2013-10-23T02:03:19.4417397Z
Setup.exe Information: 0 : RtlGetVersion returns 6.3.9600 (SP 0.0).
    ThreadId=3
    DateTime=2013-10-23T02:03:19.4447410Z
Setup.exe Information: 0 : GetProductInfo returns 50(0x32).
    ThreadId=3
    DateTime=2013-10-23T02:03:19.4457406Z
Setup.exe Information: 0 : The operating system is Windows Server 2012 R2 Essentials.
    ThreadId=3
    DateTime=2013-10-23T02:03:19.4467401Z
Setup.exe Information: 0 : PS> Get-WindowsFeature -Name:ServerEssentialsRole | Select-Object -ExpandProperty:Installed
    ThreadId=3
    DateTime=2013-10-23T02:03:19.9957563Z
Setup.exe Information: 0 : Windows Server Essentials Experience role is installed.
    ThreadId=3
    DateTime=2013-10-23T02:03:29.6280511Z
Setup.exe Information: 0 : PS> Import-Module -Name:WssSetupCmdlets -Cmdlet:Get-WssConfigurationStatus
    ThreadId=3
    DateTime=2013-10-23T02:03:29.6440517Z
Setup.exe Information: 0 : PS> Get-WssConfigurationStatus | Select-Object -ExpandProperty:Status
    ThreadId=3
    DateTime=2013-10-23T02:03:29.8080570Z
Setup.exe Information: 0 : Get-WssConfigurationStatus returns 'Finished'
    ThreadId=3
    DateTime=2013-10-23T02:03:29.9290592Z
Setup.exe Information: 0 : Windows Server Essentials Experience role is configured.
    ThreadId=3
    DateTime=2013-10-23T02:03:29.9290592Z
Setup.exe Information: 0 : Pausing automatic updating...
    ThreadId=3
    DateTime=2013-10-23T02:03:43.5934789Z
Setup.exe Information: 0 : Installing C:\Users\Steve\AppData\Local\Temp\2\IXP000.TMP\Windows8.1-KB2877939-x64.msu...
    ThreadId=3
    DateTime=2013-10-23T02:03:44.4985065Z
Setup.exe Information: 0 : wusa.exe exits with code 0.
    ThreadId=3
    DateTime=2013-10-23T02:07:29.2593836Z
Setup.exe Information: 0 : Resuming automatic updating...
    ThreadId=3
    DateTime=2013-10-23T02:07:29.2593836Z
Setup.exe Information: 0 : Starting to search update...
    ThreadId=3
    DateTime=2013-10-23T02:07:29.3043848Z
Setup.exe Information: 0 : PS> Install-WindowsFeature -Name:Desktop-Experience -Confirm:False | Select-Object -ExpandProperty:Success
    ThreadId=3
    DateTime=2013-10-23T02:07:29.3343851Z
Setup.exe Warning: 0 : PS: You must restart this server to finish the installation process.
    ThreadId=9
    DateTime=2013-10-23T02:13:33.9205387Z
Setup.exe Information: 0 : Windows Desktop Experience role is installed.
    ThreadId=3
    DateTime=2013-10-23T02:13:33.9215395Z
Setup.exe Information: 0 : PS> Enable-WindowsOptionalFeature -Online:True -FeatureName:SearchEngine-Server-Package -NoRestart:True | Select-Object -ExpandProperty:Online
    ThreadId=3
    DateTime=2013-10-23T02:13:33.9275389Z
Setup.exe Warning: 0 : PS: Restart is suppressed because NoRestart is specified.
    ThreadId=5
    DateTime=2013-10-23T02:13:39.3497048Z
Setup.exe Information: 0 : Windows Search optional feature is enabled.
    ThreadId=3
    DateTime=2013-10-23T02:13:39.3507050Z
Setup.exe Information: 0 : Turning on media feature auto-enabler...
    ThreadId=3
    DateTime=2013-10-23T02:13:39.3617041Z
Setup.exe Information: 0 : Setting registry [HKLM\Software\Microsoft\Windows\CurrentVersion\Run] '{61A7F297-9438-4920-9026-893ABD18F741}' = '"C:\Windows\system32\WindowsPowerShell\v1.0\PowerShell.exe" -NonInteractive -Command "C:\Windows\system32\Microsoft.Windows.ServerEssentials.MediaStreamingEnabler.exe"'...
    ThreadId=3
    DateTime=2013-10-23T02:13:39.3617041Z
Setup.exe Information: 0 : Media feature auto-enabler is turned on/off.
    ThreadId=3
    DateTime=2013-10-23T02:13:39.3627043Z
Setup.exe Information: 0 : PS> Restart-Computer -Force:True -Confirm:False
    ThreadId=1
    DateTime=2013-10-23T02:13:48.5809850Z

No Dolby via MCE - Media Cen

Coping with this problem for 3 weeks now, I seek for help here. Here is my configuration:* Creative Labs DTT3500 DeskTop Theater Digital 5. Computer Speaker System Manual* SB Li've!Platinum Manual* PowerDVD 6.0?DeLuxe?I've connected the DTT3500 with the SB using the Digital DIN. By chosing the right settings on the DTT3500 and the sound card, I'm getting a clear test signal from all 6 speakers. Using PowerDVD, I'm getting a digital signal too. However, from the Media Center setup, I'm getting a strange stereo signal when I choose for the 5. option in the speaker configuration. I guess, I've tried already all possible combinations chosing SPDIF or 6 speaker configuration in PowerDVD; nothing hel
ps.
Does somebody any idea of the problem?Message Edited by DoktorBlue on 03-3-2006:55 AM

? You are needing to do AC-3 passthrough and you may want to use the Shark Codec Pack instead of K-Lite. Instructions for Shark's pack are here:
http://shark007.net/forum/Thread-problem-spdif-passthrough-x-fi-decoder-Win7

Creative Media Source + Windows XP Media Cen

I have always used the Creative Media Source as an audio player and as a method of creating playlists etc.
I just recieved a New Dell XPS400 with a Dell installed Soundblaster X-Fi Extreme Music card. This machine has WinXP Media Center Edition installed as an operating system, for which I did a clean re-install. In reistalling the software from the Creative disk that was supplied with the computer I noticed that Creative Media Source was not included as part of the package. I further noticed that the in the download section of the website that this isn't an available download for the Win XP Media Center OS, even though it is available for Win XP Home edition.
Is there a compatibility problem in using the Creative Media Source with this OS ? Is there a conflict with the other Creative software that is typically installed with this card? In case it makes a difference; in playing back wav and mp3 audio files I am not interested in opening up the Win Media Center interface in order to play those files or create playlists, I simply want to associate those audio files to open and play with the Creative Media Source as I have always done with previous versions of Windows XP.
Thanks for any advice and clearification !

Hi m8. Just install the Windows XP version (Professional), and it will work, as I use Creative Media Source with Windows Media Center 2005, no problems. After, try the "product update" under support on the creative site, to see if there are any new things to update, just incase.
cause_of_chaos

Can flash media live encoder feed stream to remote adobe media server installed on other machine?

Hi All,
i have installed Flash Media Live Encoder 3.2 on my one machine xxx and AMS version 5 on another machine yyy.
i am trying to configure FMLE for ams server URL - i.e. stream to flash media server option on FMLE. I have generated FMS URL as "rtmp://yyy/live" and clicked "connect" to. Its not getting connected to it.
please find attachment for error.
is there any restriction that our AMS should be on same machine wehere we have installed flash media live encoder ??
please help on this!!

If you have any trouble to understand from above query then please go through following scenarios and do reply if you have answers to it.
I have installed Flash Media Live Encoder 3.2 on my machine and Adobe Media Server 5.0.3 on another machine.
My requirement is to stream RTMP from Flash Media Live Encoder which is installed on my machine(source) and receive RTMP stream on Adobe Media Server which is installed on another machine.
I am unable to connect to "rtmp://<"IP Address of Adobe Media Server installed system">/live on AMS installed machine.
Atached please find the error message screen shot:
Are there any restriction that Adobe Media Server and Flash Media Live Encoder must be installed on the same machine?

XFi, Vistax64, CMSS in Media Cen

Hi All, I have an XFi Extreme Gamer, with 7. Creative Speakers. I am running Vista x64 Ultimate. When I test speakers in sound settings I get sound from all speakers. My problem is I have set CMSS to upmix, but in Media Centre playing 5. DVD's (or Stereo TV) It does not upmix it to 7.. For example the middle right and middle left speakers do nothing when playing 5.. I have found some relevant information in the knwon Vista Issues post but the status says there is a team working on it. Does anyone know if this has been fixed yet or an ETA (or just a workaround will do to get it working ) The Vista audio architecture changes the way per-stream audio processing works, which required us to write new software to support this
Issues that may be encountered:
CMSS no longer works on audio streams from the OS.
Status:
Features based on Windows XP architecture must be rewritten to conform to the new Vista architecture, and we have a team of software engineers, project managers and testers dedicated to this task in order to provide our customers the same seamless audio experience under Windows Vista that they enjoyed under Windows XP. Thanks Diaf

If you're that unhappy with their products, why buy them? Contacting the big retailers isn't going to keep them from carrying Creative's Products.
I don't think they've just "hacked" the previous drivers as the audio is completely rewritten in Vista. I fear that Creative has taken the same approach as some other companies out there and figuring that normal consumers don't have 4Gb of ram.... Then again, normal consumers don't have x64 windows either.
Rember whem Bill Gates said that something like 64K of ram was more than anyone would EVER need? I seem to remeber by the end of that year, 28k was "Too Much"
I think the bottom line here is that if you aren't happy with their products, vote with your wallet -Buy something else. As far as I'm concerned, I'm happy with my Audigy 2zs's and X-Fi. I'm NOT happy with "Software" sound solutions, such as the onboard sound or Turtle Beach's cards; after all, they are only Via chips on a add-in card. Still software sound.

X-Fi and TV playback in Windows Media Cen

Hi all,
someone could help me with this problem?
When I listen to the TV in my Windows Media Center the audio isn't clear but with reverb and a lot of noise. No problem with DVD or mp3.
No problem also with my old audigy2!
Some idea?
Thx a lot!
Cla
TV tuner is an ATI ehomewonder pci
VGA is a ATI Radeon X800
CPU p4 3.02Ghz
MB Asus P5B
RAM Gb

I'm having the same problem.
I connected my Pinnacle PCTV Stereo card to the line/in mic/in flexi-jack of my X-Fi card, but the sound is terrible. Lots of noice & reverb when listenoing to the TV-sound, no clear sound like before with my Audigy card.
Anyone?:smileytongue:Message Edited by Mofista on 0-28-2006 :04 PM

Live 5.1 and Windows Media Cen

I'm completely confused. I'm sure I have a SB Li've 5., but my Windows Media Center says I have a Li've Value. The Model is CT4760.
In either case, I'm trying to get Optical Audo to work with 5.. I can get 2 channels out of Optical Audio, but no more. The Creative software only gives me the options for headphones, 2 speakers and 4 speakers. With 4 speakers selected I still only hear 2. No where do I see an option for 5. or to allow AC3 passthrough.
I used this card before with a Linux system and I had 5. working just fine. Am I missing something? Do I not have a Li've 5. card? Am I installing the wrong thing? I downloaded the driver install from here, so I assume its correct. Media Center installs it's own if I don't use that, and it's also for the Value card.
Thanks for any help,
GamersCloset

CT4760 is actually..a 4 channel sound card (therefore, I think that's why Windows Media Center Editin detects it as Value card) But it does have 5. Digital Output (not analog)
I don't have hands on experience with MCE with me, but try this.
Go to 'Volume Control' in Accessories, click on Options and turn on 'Advanced Options'
There should be an 'Advanced' Button at the bottom of the master volume slider.
Click that and select "Digital Output Only"
Otherwise, you'll have to try to install the right drivers. Its definitely not SB Li've 5.
But since you are using Digital speakers, I dont think you have to worry too much.

X-Fi remote & XP Media Cen

Similar Messages

Maybe you are looking for