X-Fi: Send same audio to both Speakers and SPDIF?

I'm using an SB X-Fi Titanium Fatalty Pro. Is there a way I can set it to send the same audio to both the analog (speakers) and optical/SPDIF outputs? I've got standard desktop computer speakers and a set of wireless surround-sound headphones that have an Optical input, and I'd like to be able to have them both plugged into their respecti've rear-panel jacks, but be able to switch between them by simply turning off the speakers and turning on the headphones, or vice-versa -- WITHOUT needing any other software.
It was literally that simple on my old sound card, a 0-year-old (or thereabouts) SB Audigy Gamer. But doing the same thing on the X-Fi involves either plugging the speakers into the extra-headphones output on the transmitter for my wireless headphones, or using another piece of software called "Virtual Audio Cable" and a program it comes with to split the audio signal to the two playback devices -- which leaves me with another two windows that I have to leave open.
This is rather annoying. If a decade-old Audigy -series card could do it, the X-Fi should have no problem. Why is this not an option?
For reference:
Windows 7 Ultimate x64
AMD Phenom X4 940 (3.0GHz quad-core)
8GB RAM

I am having the same isue with my [url="http://www.amphony.com" title="Wireless Headphones">wireless headphones[/url] with optical input. Any solutions?

Similar Messages

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

Does Pool & Cluster tables has the same structure in both Dictionary and Db

------------ Exists with the same structure both in dictionary as well as in database exactly with the same data and fields
a. Pool Table
b. Cluster Table
c. Transparent Table
d. All the above
To my knowledge, I know transparent table has the same structure in both Dictionary and database.
Can anyone tel me the answer for the above question.. whether it is
c. Transparent table
or
d. All the above

Transparent Table:
A physical table definition in the database for the table definition which is stored in the ABAP Dictionary for transparent tables when the
table is activated. The table definition is translated from the ABAP Dictionary to a definition of the particular database.
A transparent table in the dictionary has one to one relationship with a table in the database.
For each transparent table in the data dictionary there is one associated table in the database.The database table has the same name, the same number of fields and fields have same names as the transparent table definition. Transparent tables are used to hold application data. Application data is master data or transaction data used by an application.
e.g. master data - table of customers
Transaction data - order placed by the customers.
Pooled tables:
Pooled tables can be used to store control data (e.g. screen sequences,program parameters or temporary data). Several pooled tables can be
combined to form a table pool. The table pool corresponds to a physical table on the database in which all the records of the allocated pooledtables are stored.
Pooled table in R/3 has a many to one relationship with a table in the database. For one table in the database there are many tables in the R/3 data dictionary.R/3 uses pooled tables to hold large number of very small tables. You might create a table pool if yoou need to create hundreds of small tables that each hold only a few rows of data.
Cluster tables :
Cluster tables contain continuous text, for example, documentation.Several cluster tables can be combined to form a table cluster. Severallogical lines of different tables are combined to form a physical record in this table type. This permits object-by-object storage or
object-by-object access. In order to combine tables in clusters, atleast parts of the keys must agree. Several cluster tables are stored in
one corresponding table on the database.
A cluster table is similar to pool table . It has many to one relationship with the table in the database.
They are used to hold the data from a few(approximatelly 2 to 10) very large tables. They would be used when these tables have a part of their primary keys in common and if data in these tables are all accessed simultaneously.A cluster is advantageous in the case where data is accessed from multiple tables simultaneously and those tables have at least one of their primary key fields in common.Cluster table reduce number of database reads and thereby improves performance.

Sound from both Speakers and headphones at the same time

I have a Pavilion Sleekbook 15-b003ee
recently i have a very annoying problem anytime i plug in a headphone on the sound comes from both the laptop speakers and the headphones
I tried the following
1- Changed the driver tried both versions on the HP support
2- changed the headphones tried 3 of them and the same problem
3- tried the Microsoft HD Audio driver (no sound could comeout from the headphones)
4- tried disabling the communication device from the control panel while the speakers is on and vise versa
5- A system restore
still the same problem and i think it maybe an malfunction from the hardware or the headphones jack port on the laptop but how does the sound still come out from the headphones ?
I thought of buying a USB headphones but the laptop is no more than 3 months old so i think i still on warranty and such if it is a hardware problem , I am currently in Egypt bought the laptop from Egypt also

Hello RamiAbbas,
Take a look at this document, which provides troubleshooting steps that I hope, help resolve your issue. You are also in warranty, and are welcome to call and speak to an HP rep to help as well.
Since you are in Greece, look here for the number you need to call for tech support.
Please let me know if this helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Sound coming from both speakers and headphones at the same time in probook 4440s

I have a Probook 4440s with windows 8 pro(64 bit) with IDT high definition codec installed. Yesterday when i was playing some songs i noticed that the sound was coming from both headphones and speakers even when my headphones are plugeed in and my lappy was having no such problems a few hours earliers while i was watching a movie. Please help..

It may be because you have both the internal speakers and headphones enabled at the sametime on your laptop. This might just happen automatically when you plug your headphones in. You need to manage your audio devices on your laptop.
Go to Control Panel> Hardware and Sounds> Manage Audio Devices> Playback Tab (which should already be selected)
In the playback tab there should be a list of all the audio devices you are using on your computer. Right click on the one you don't want to use and click disable. This should stop the sound coming from that audio device.
Remember: You will need to enable that audio device if you want to listen to sound through it again. Your internal speakers won't work once you enable them again. This might also be the case with your headphones. You may also have to do this every time your plug in a device or once you restart your computer.
Another note: Sometimes disabled devices will not show up on the audio device list so once you disable a device it will dissappear. This is an easy fix too. Just right click on an audio device and make sure show disabled devices and show disconnected devices is checked.
I hope this helps.
(I was using a computer with Windows XP to explain the instructions but it should be similar with your Windows Operating System. You may however have to play around a little on your computer because it may be slightly different)

Does Apple TV output audio via both HDMI and Toslink at the same time?

I would like to know if Apple TV outputs audio via both the HDMI and Toslink ports AT THE SAME TIME...
Ideally, I want to use it in my main zone connected to my TV via HDMI and convert the Toslink signal to analog to be exported to Zone 2 on my receivers. (My receiver - as do most - can only direct analog sources to Zones 2, 3, and 4)

Hey Bob,
I have this same issue. I was wondering what model of toslink to analog adapter you went with and how well it works?
Thanks!

Headphones in, audio out both laptop and headphones

Is this a coincidence that it happened around the same time or is there an option in the computer to turn off the laptop speakers when the audio input is detected?
As the subject says, whenever I plug in my headphones, sound comes out from both the laptop speakers AND the headphones. I think this occurred when a bit of the outside ring got chipped off. I have a picture of the audio jack.
Solved!
Go to Solution.
Attachments:
IMG_8930.JPG ‏1094 KB

I have a brand new Toshiba L850d satellite and had the same problem and like most was frustrated trying to get the speakers to turn off with the headphones plugged in and then it hit me leave the headphones plugged in and restart the computer and it worked (autodetect? i guess) Listening to tunes and typing hope this helps someone worked for me. Rock it!

No internet, "PPPoE Server Not Found" message. Same problem with both old and new modems.

Help please!
My internet connection with my old Westell 6100 modem was working fine, then quit all of the sudden and would not restart. The DSL and Data lights on the Westell modem were both green. The Internet light alternated between red and off.
I tried every troubleshooting thing I could think of:
Powering down and re-starting the modem and computer.
Resetting the modem.
Checking all of the wire and jack connections.
I plugged my computer ethernet cable straight into the modem, bypassing my router.
I tried both Windows and Mac computers.
I plugged the modem directly into the network interface on the outside of my house to bypass all of my house wiring.
I checked all my phone jacks with a telephone tester to make sure both phone lines were working and not reverse-wired.
I made sure I did not have a DSL filter installed on the modem line.
Verizon Tech Support did a line test and told me the line was fine but that there might be a problem with either my modem or something at the "central office" (not sure what that means). Verizon also sent me a new router as well -- a D-Link DSL-2750B.
The new D-Link router also does not connect to the internet (same problem). The DSL, Data, and Internet lights are all green on the D-Link. I have the computer directly connected to the modem with a new ethernet cable. I repeated the above troubleshooting steps. I went into the router configuration 192.168.1.1 and ran the modem's "Internet Troubleshooting" tests.
There were two error messages on the router configuration screens:
1."PPPoE Server not found" error message is shown on the summary screen.
2."No internet infrastructure present. Please call your infrastructure provider." is shown in the "internet troubleshooting" test results.
Verizon had me change some settings inside the router configuration -- no dice. Verizon ran another line test. A "Level 2 Tech" took over the call and told me that he thinks that the cause of the problem is that the outside wiring coming to my house is reverse-wired. How can this be true since my DSL worked for 2 years before this, my phone line tester indicates my phone lines are wired the right way, and my router reports "PPPoE Server Not Found?"
Verizon is sending out a repair tech to check the outside wiring but I don't think that is the problem at all.
HELP!
Solved!
Go to Solution.

If you're getting DSL sync (solid DSL light), this sounds like a case of a bad line card to me. I've seen it happen before where it wasn't an account or route issue to the network.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Sound from both speakers and headset! How to fix?

Hi I've had this problem since buying my laptop early last year; whenever I skype call, all other sounds except for my call itself comes out through the speaker. Due to my mic being internal I am then forced to play games without sound and am unable to watch videos/ movies whilst skyping. I have googled this, and it appeared people has had identical issues in the past. However, the remedy for this issue does not work for me. I go into: Tools -> Options -> Audio Settings; but there is not option for Headphones/ Speaker. It only has speakers and headphones separately for me. Please help me as I have been unable to play games with sound/ watch videos for the past year while in skype (Which is extremely frequent). Thanks

You can try this:
http://community.skype.com/t5/Windows-desktop-client/Skype-audio-splits-to-both-headphones-and-speak...

Sound coming from both speakers and headphone,

The speakers and the headphones working at the same time , I am not sure what case this problem , please support.
HP Pavilion g7 Notebook PC
Windows 7 Home Premium 64-bit Service Pack 1
Audio device 1 : IDT High Definition Audio CODEC
Audio device 2 : Intel(R) Display Audio

Hi,
Can you post back with the full Model No. and Product No. of your g7 series notebook - see Here for a guide on locating this information.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Same Query for both Main and Sub Report

I have a report whichs works but I don't think i'm getting the data to both the Main Report and Sub Report in the most effcient manner... I have a report that totals users call subject counts. But then end user wishes to see all users total counts and the grand totals of call counts on the first page then then the breakdown of types of calls on subsuquent pages... so I created a report with a subreport in the report header.... I use the same query in both the sub and main report... however it asks the user to enter the parameters once for the main report and once for the sub report... Parameters are both the same for each; month and year... so it currently runs the query twice I want to run it once and use the data for both reports... I group by name and then sum the call subject counts for the user totals... and in the sub report I hide the detail section and I'm just left with the sub total line for each user, then in the main report use the same grouping and suming again and I start a new page for every user...
Using CR 9
Thanks for any advice
Vincent

i think you need to link the main report parameter with the subreport parameters inorder to pass the parameter values from main report to subreport. So right click on subreport and go to change subreport links and add parameter fields and select parameter fields from your subreport and un check the databse fields in subreport.
Regards,
Raghavendra.G

Using the same client for both regfree and out-of-proc COM

Hi,
Here is the context:
1. We have the same set of COM objects that can be deployed as in-proc COM servers (dlls) or out-of-proc COM servers (exe). In-proc servers are called through regfree COM.
2. We have test projects that use the in-proc COM servers through regfree COM.
I would like to use the same test client projects for both regfree and out-of-proc COM servers (but not at the same time). For example, I would like to first run the client using regfree COM, then delete the in-proc dll and register the out-of-proc com server,
and then run the client again without having to recompile. But I have not found a way to do this.
Instead, what I have to do is modify the project settings of the test client project, removing the regfree stuff (the manifest dependencies) before I can use the test client project with the out-of-proc server.
Is there a way to do this without recompiling?
FYI, I have tried regfree COM by changing the client project's Project->Properties->Linker->Manifest file->Additional Manifest Dependencies, or by changing the client project's Project->Properties->Manifest Tool->Input and Output->Additional
Manifest Files. Either way works with regfree COM. And either way I have to remove those settings before making it work with out-of-proc COM (and hence recompiling, which is what I am trying to avoid).
Thanks,
Nick

Try Manifest Tool > Input and Output > Embed Manifest = No, and change Linker > Manifest File > Manifest File to drop ".intermediate" in the middle (or just rename the file after the build).
A manifest doesn't have to be embedded into the executable, it could be a standalone file named like ApplicationName.exe.manifest and sitting in the same directory next to the .EXE. Then you can simply delete or rename it back and forth to switch between
registered and reg-free COM.
Igor Tandetnik

How do I receive same messages on both iPad and iPhone?

Before apple restored my iPad all messages were appearing on both iPad and iPhone. I am not sure what I need to do to set my iPad to receive all messages.
I have compaired both settings and they are pretty much the same. What can I do to fix this"

I am giving you a solution assuming you are referring to iCloud mail..... so try this...
Setting>iCloud>turn mail off

I have two itunes accounts on two different computers, can i merge the accounts so i can then have the same music on both ipod and iphone?

i have two itunes accounts one for each of my two computers, can i merge them so that i can have the same music on my ipod and iphone,
it is all so confusing i need help!!!

You can't currently merge accounts and the content will remain tied to the account that originally bought/downloaded it, though you can have more than one account authorised on the same computer's iTunes via Store > Authorise This Computer. As only one account can be actually logged in at a time (Store > Sign In / Sign Out) for purchasing or re-downloading/viewing past purchases, you may want to use just the one account for future purchases.

X-Fi: Send same audio to both Speakers and SPDIF?

Similar Messages

Maybe you are looking for