X-Fi Softw

Hi All,?I've bought a X-Fi XtremeMusic a year ago, Now I've bought a new PC and place the card in it. However I've lost all CD that came with it when I bought the card. The drivers I can download, so that not a problem, but I used to have a program with which I could record music, and configure the card. I cannot find this piece of software on the site, And I'm stuck with the Creative Audio-console that is installed together with the driver. Does anyone know where I can download the software?Thanks,Koen?

The Original installation CD for your soundcard?are here :?http://badboy.hub.io/

Similar Messages

Hi my girlfriend iphone 5 is switching off himself after few minutes of useing him.i was charged fully..there is the newest softwer plus is after restor to the factory settings...its showing flat battery but was charging full???

hi my girlfriend iphone 5 is switching off himself after few minutes of useing him.i charged him full then I install the newest softwer plus is after reset to the factory settings...its showing flat battery but was charging full???and still is switching off after some time.please help

romifrommidleton wrote:
Help some ideas thas what we askin all here...thanks anyway
Do you not understand English? The "idea" we have given you is TO TAKE THE PHONE TO AN APPLE STORE OR AUTHORIZED SERVICE PROVIDER!!!
If you want to follow the advice is up to you. No one here really cares what you do in the end.

Hi I got iPad I'm using iOS. 7.1.1. Softwer but is no airdrop fecelity in that softer for iPad plees help me out to use airdrop for my ipad

Hi I got iPad I'm using iOS. 7.1.1. Softwer but is no airdrop fecelity in that softer for iPad plees help me out to use airdrop for my ipad
Witch verson I have to use for airdrop plees send me link forit

What model ipad do you have
the airdrop requirments are:
iPhone 5 or later
iPad (4th generation)
iPad mini
iPod touch (5th generation)

HT4623 I have a new iphone5 and about 5 meters wifi signal is reduced to one scale, and finally cut off my connection with routerom.I also have iphone 4s and ipad3 and on those I have full signal everywhere. I installed the latest softwer iso 6.0.2 and

I have a new iphone5 and about 5 meters wifi signal is reduced to one scale, and finally cut off my connection with routerom. I also have iphone 4s and ipad3 and on those two I have full signal everywhere. I installed the latest softwer iso 6.0.2 and I still have a problem!

Just get into "General" -> last option is "RESET" -> Opt for "RESET NETWORK SETTINGS"
Your phone will reeboot in a couple of minutes n then get fine on with full signal on the wifi scale.
Worked perfect for me. Do try n let me know.
ATB

HT4623 i have download 6.1 update softwer now how i update this to my iphone 4

i have download 6.1 update softwer now how i update this to my iphone 4

Using itunes right? plug iphone 4 to your computer then pressing "Shift" and click restore iphone. Dialog would come out, just select your 6.1 file.

My iphone mail contact softwer not working how i can backup

i need to ask my iphone mail contact softwer is not working i cant save any contact

your post in unintelligible. Please post in your native language or find someone with better command of the English language.

How can I save apple-formatted tunes & then switch to microsoft-based softw

I received an IPod (30 GB) with 6,000 tunes formatted for apple, but I use windows. I have to reformat, but if I, I realize I will lose the existing library of songs that I want to keep. Is there any way I can do this without losing the current downloaded library?

If you still have access to the Mac iTunes library those songs came from then you can format the iPod on the Windows machine, then plug the iPod back into the Mac, which can read Windows formatted iPods, then you can put the stuff from the Mac machine to the Windows formatted iPod.
How to use your iPod to move your music to a new computer using iTunes7
http://docs.info.apple.com/article.html?artnum=300173
How to use your iPod to move your music to a new computer using iTunes6
http://docs.info.apple.com/article.html?artnum=304304
Copying from iPod to Computer threads...
http://discussions.apple.com/thread.jspa?threadID=926222&tstart=0
http://discussions.apple.com/thread.jspa?threadID=893334&tstart=0
http://discussions.apple.com/thread.jspa?messageID=797432&#797432
Also these useful internet articles...
http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
http://playlistmag.com/help/2005/01/2waystreet/
iPod: Frequently Asked Questions
http://docs.info.apple.com/article.html?artnum=60920
Patrick

I had set up and Itunes account years ago....older Ipod.......old PC died....trying to access my old music library from my new PC after downloading software. How do I find and access my library. I can sink my music from my Ipod to the new PC and softwa

I am an older novice user. I gave my Itouch to my duaghter....and took her Ipod Classic 64.....have used and played the songs but not updated in a couple years. The laptop I set the account up from died and I downlowded the new 10.6 software onto this PC. /When i signed in to my account I cannot seem to find a place to find my old library. I had more music and movies on the library than on the Ipod classic....was hoping to find it all before i sync up again.
Any tips on how to find or access the old library or did I lose it with the old laptop? LOL...a confused oldie....would like tomove music to my Iphone once all is found and resumed.
Thanks in advance for any insight or suggetions.

The old iTunes library was lost with the old PC. However, it all that music and content is still on your iPod there are many ways you can extract this content from the iPod and import it back into iTunes.
Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the new PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

I wrote a 27 chap. book on my iMac from ****. B4 I was completely finished, I spent hundreds of hours on-line and in store, and final answer after atty was involved was 1) we've never seen it b4 2) we don't know what it is 3) it's not ur harddrive, softw

finished, at about 26 chaps, 1) hard-drive went out, 2) visited site & then got "ur virus is infected buy us now" pop-ups (only time in 3 year. of using a mac, and 3) (forget what but an issue. Spent hours on-line, and at store. And finally w/an attorney when I kept being told it was user error. (I"m getting to book isssue I promise) During this time, Harddrive was wiped, external b-up replaced, something about "separated" etc. etc. and even computer replaced w/same issues afterward. Final vrdict 1 yr. later: 1_ we've never seen it 2_ we don't know what it is--not a virus, not harddrive malfunciton, not software issue 3_ we don't know how to fix it. Live w/it w/multiple errors and oddities every time you try to type or start all over. Got an attorney, and took it in again, and miractulously, "he" fixed it. However, in meantime, I wrote many duplicate chapts. when I couldn't find missing, or edited, some, etc.
Everything was writen in Pages, chapt. by chapt. Now I have a 27 chap. book(my first) in pieces--w/many duplicate or slightlychanged chapters all over the computer. I'm trying to reconstruct. Some chaps. I just can't find, some are garbled, some do strange things like left justifying and changing to single space (and can't change back to double, just have to erase and start over, on those old documents. Needless to say I have felt so defeated it's been really hard to get back to the almost finished book for last re-write.
The Questions: 1)I'm trying to find the chapters, and as I find and edit them I need to know how to make this massive achievement work. Should I continue w/chapter by chapt until all are finished? Or start putting them into single document as they are finished? How do I find anything? If I put finished in PDF to send to publisher, even tho it's my PDF, I can't go back and edit my own, except in a duplicate entire document, is that correct?
I cant' find the string to start unraveling this mess. I do have hardcopies made and presented to writing group so need to edit those chapters.
I'm used to paper typewritten copies of everything for manipulation, and I know things now I should have done on the Mac but didn't when I started. (I"m also having trouble getting a Table of Contents to work, which is making it doubly hard to find anything.)
To sum it up, I think, How do I write a book, with chapters (no technical sstuff, only a few footnotes & I may group them at the back of the book.) as far as manipulating documetns/folders, have ready for export, etc. Probably too long a question so go ahead and chew me out. (And I havent' used any other document except Text Edit in years.) I am overwhelmed an book is wasting away.

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

All you need to know about Operator-Variant softwa...

There are lots of myths and misunderstandings about phone software, and you don't need to search far on this forum to see the issues that can be caused, so this post will try to answer the common questions.
What is Operator Variant / Branded phone software?
In many markets, mobile network operators dominate the sale of mobile phones, and their power in the market gives them the leverage to demand changes to the phones that they sell. Branding may include unique colour schemes for outer casings, logos on cases, default themes showing the network logo and using network colours, changes to the phone software to remove features, change features or add extra features, and in some cases different pre-installed applications.
What features might be missing?
Common ommissions in branded phones are features for which the network makes no money. For example, some networks including Vodafone removed VOIP capabilities from their versions of the N95 in many markets because they preferred their customers to make chargeable GSM calls instead. Another good example is the American network AT&T, which removes the voice-dialling feature of phones in favour of its own network-based service which requires a monthly subscription.
You will often also find that the section of the S60 Settings Wizard that deals with settings for MMS and internet access points is also missing, making it difficult for people who switch to other networks to reconfigure their phones for the new provider.
Who changes the software?
You often see people saying that "(operator name) changes the software...", but this isn't strictly true - your operator doesn't open every box and change the software before selling you the phone, they provide a list of their required modifications to the phone manufacturer before they accept to place any orders, and the modified (or branded) software is then presented back to the network for approval, after which orders are placed - the phone leaves the factory in its branded state, and in many cases in a SIM-locked state.
Why can't I update?
The network holds intellectual rights to the branded software, and just as they approve the changes in the initial version before they begin to sell any particular model, they also exercise the right to approve software updates before the manufacturer can release them. This often causes delays to software releases, and can even prevent software releases. For example, our old friends the Orange and T-mobile groups hit N95 owners by refusing to approve v20 for their branded versions at a time when N-Gage gaming was being relaunched, meaning that N95 users couldn't meet the minimum software requirements to run N-Gage software.
It is common for networks to stop approving updates after they stop selling a particular model, as they no longer see any profit in supporting the handset any more. Some networks, and any customers of the Hutchinson 3G group around the world will testify to this, seldom approve any updates at all. If you have a problem related to software and call your network for support, expect to be told that the problem is a delay on the part of the manufacturer, but this common excuse is simply untrue - the manufacturer can only release updates for branded phones when it receives network approval.
Why does branded software cause so many problems?
This one you'll never get an official answer to, because the phone manufacturers and mobile networks walk a fine line in their professional relationships, but my educated guess is that the manufacturer doesn't extensively test modified operator-variant software because since the network needs to give approval, it is assumed they will test that the changes meet their requirements and work correctly. The network likewise doesn't fully test the software because it assumes that the manufacturer has done it - classic lack of communication.
Can I remove branding and install the standard Nokia software?
Strictly speaking, No. There are plenty of people on the internet ready to tell you how to do it and provide software to help, but anything you do yourself is an unauthorised change that will invalidate the warranty. You risk causing additional damage to an expensive phone and losing support to repair it.
It is known that you can have this officially changed by a Nokia service point or Flagship store, provided that any SIM-lock has already been officially removed by the network, and in some cases that the network provides written consent for this change; the phone would be changed to a generic product code, the software reflashed, and if completed properly, a new product information label will be put in the battery compartment reflecting the change. However, we also know from this forum that not all service points offer this service, and in some countries the local Nokia head office does not permit it.
It's my phone, I bought it, I own it, I can do as I please!
Yes, and no. Network operators and retailers are guilty of not warning customers that their product is a modified version rather than an original version, but at the end of the day you have paid for and accepted a branded phone. In order to benefit from the support of the device warranty, any work has to be carried out by an authorised person, just like any other product from calculators to cars.
Edit: one of my trademark typos corrected.
Message Edited by mccbleue on 13-Oct-2009 05:17 PM

Make sure you have entered your Voyager licence code in CMC.
I'm using BOXI R3. but is same for BOXIR2 Make sure you have defined a voyager connection in the CMC.
in here you need to specify
Server type: Server
Server: your SSAS 2005 server name
then click the Connect and type a user ID with appropriate authority to the cubes.
then select the cube you want.
then specify:
Authentication: User Specified
User: Authorised user
Password:
Click Save.
You then should be able to create a new Vouager workspace from the infoview.
Hope this Helps (ive got about 20 cubes accessed by Vouager... not such a flash viewer but its the only thing BO offer. OLAP intelligence (a good product) is no longer available!

Can someonoe please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra softw

Can someonee please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra software. My software other than that problem works fine.

Couldn't complete what request? Way more information please.
What operating system?

Where can I find a PDF explaining all about my Blaster Audigy SE board & softwa

I just installed an Audigy SE board in my XP, and so far it seems to work well.
I've only been working with it for a short time, and it seems to me there must be a manual somewhere that I can download, that will tell me about all the capabilities of this board and software, the subtleties of different settings, etc.
Can anyone help?

Hi-
Here is how to take it apart.
That's about as far as I can get you. Would look for the obvious loose connection, burnt component on board, burnt trace, etc.

Latest version of Itunes won't download latest version of ipod touch softwa

I have a macbook from April of 2008 which has the latest version of itunes 10.10.01. I have apps that i've purchased from the itunes store (including a $20 german-english translator that i DESPERATELY need for class). I recently restored my ipod to factory settings because I was experiencing issues with it charging properly.
Now i've had the german app for over a year before the restore and it worked just fine. But now my computer and itunes keeps telling me that the app needs the latest version of ipod touch software in order to sync the app. When I click "check for updates" on the ipod screen it claims that my ipod touch software is up to date - but lists it as 2.2.1!!
I know that the lastest version of ipod software is MUCH later than 2.2.1 but I can't seem to convince my itunes of this. Someone help me out please! I've done everything I can think of but my itunes is up to date and i NEED the app.
Much appreciated!!

there could be the problem of that u didnt update to 4.0 and r at 3.1.3 and r trying to update to 4.1 u might have to take your ipod to an apple store for them to check it out

Zen Vision M Recognized by XP Pro, but not by Creative Media Organizer or other transfer softw

I have a Zen Vision M. It worked perfectly for months. Suddenly, it wouldn't turn on. I started it in Rescue Mode, did a clean up and several reboots. It started doing a rebuild on every start. Now when I plug it into the USB port, my computer recognizes it. It gives me the portable device icon in the task bar. But, if I try to use it with Windows Media Player 0, Creative Mediasource, Organizer or anything else, it says the device is not connected. I have checked Device Manager, and it shows up. I have uninstalled and reinstalled the Zen software. I have no issues with device drivers in the Device Manager. It just simply will not show up as connected on any software to transfer music.
If I connect it to the USB, it goes into dock mode. When I boot up any of the software, it shows the docking arrows moving. It's like everything is ok except the one important piece - not being recognized by the various software needed to transfer music.
Please help!? I have a Dell Dimension 8400. I run Windows XP Pro with ALL updates, and SP2. It is completely up to date with all critical updates for XP Pro. This came out of the blue and I have no explanation for it. I hadn't used it for about 3 days, but it worked perfectly up until I turned it on that last time when I got nothing and had to go through all the clean up, reboots, etc. I have done 2 clean ups so far.
Please advise what to do next.
Thanks.

Ok. I checked my version of XP. It is XP Pro, Version 2002, SP2. I checked and already had the 2 hotfixes that were listed as being needed before proceeding. I followed all the steps and changed the registry key on "everyone" as the instructions stated to do. My ZVM is still not recognized by any of the software for transferring or organizing MP3's. My computer still recognizes that it is attached. It still gives me the device icon in the task bar. It still says it's A-ok in the Device Manager. It does everything, except it is not detected by ANY of my music software. <sigh>? Frustration is at its peak for me right now. I really appreciate all of the efforts. I'm at my wits end now. I have done everything you have indicated I should, but am getting the same results. I did purchase an extended warranty from Circuit City where I purchased this last summer. Is that the next step? Do I need to get this replaced?I love this player and really don't want to go through this again. We had to exchange it twice in the first month because it froze up and wouldn't do a thing. This last one has been perfect. I keep it in a leather padded case at all times. It never has the battery drained. It never gets jostled or bumped or dropped or anything that might damage it. When not being played, it stays on my desk in the case.
Thanks so much for any and all help.

Zen vision M not detected by softw

I have had my zen vision for a while and it worked fine but when i went to install windows media player the update for wmp failed and then the player was no longer detected so i tried uninstalling and reinstalling windows media player 0 and i also reinstalled all the creative software but still it isn't detected.
I have the latest firmware and I have tried changing permissions for the usb in the registry. The weird thing is that the zen vison M appears in the device manager under windows portable devices and it doesn't have an exclamation mark beside it or anything so it is working fine. However no program is able to detect it zen vision m media explorer, winamp, real player, media monkey,windows media player all give the same messsage that no device is detected. Whenever I plug it into the computer the option box comes up asking me what i want to do sync using media monkey/windows media player/ creative media source etc but when i select an option it opens the program and it says the player is not detected, which is extremely weird given that windows seemed to detect it a few seconds before and bring up the appropriate options. The charging icon appears on the screen and it charges but the docked screen never comes up. I think it is probably the software. I am running out of things to try and any suggestions would be appreciated.
I have been to the downloads page for it but i cant install the new creative media source as i get a message saying no player detected but i have installed all the newest software other than this.
I think my software is seriously screwed up although then again it might be the player Im not sure.Message Edited by aaahhhh on 0-08-200704:00 PM

Been Fiddling with it all day and now I finally managed to get windows media player installed i go into device manager and there is an exclamation mark beside the player but when i go to update driver i get the message class installer has denied the request to install or upgrade this device. I'm not sure if this is progress but at least something has happened.
PS i had the latest firmware installed before i installed wmp so this is not my problem.Message Edited by aaahhhh on 0-09-200702:44 PM

Windows Can't find Device Driver Softw

I just got a Zen 6GB media player, and I installed the Media Explorer software from the cd that came with it, charged the player via the computer, but I can't load anything on to the player because everything says it is still not connected. The reason for this seems to be that when I plug it in, windows cannot install the device's driver software. It starts searching for the drivers, but can't find them. In window's device manager it lists under Portable Devices a MTP Device, but it has the yellow exclamation point on it. And when you look at the devices details it says "This Device cannot start. (Code 0)"
Does anyone have any idea if there is some way I can get the drivers elsewhere and point windows to them? I'm not sure what to do. All the related software says there is no device connected, since the computer won't recognize it without any driver information I guess. Any help would be very much appreciated.
I have Windows Vista and everything is up to date as far as I am aware.
Thanks?

What i have to offer might not be right for you, but it's worth a shot (It's only a short text, not programs to DL)
Try the simple steps in this thread:
http://forums.creative.com/creativel...hread.id=27477
-Good Luck!

X-Fi Softw

Similar Messages

Maybe you are looking for