X-Fi speaker assignment problems with Elite Pro and T7900 speak

Ok, so this appears to be a very common problem on these boards and I'm not so sure that a solution exists.
I have wired everything up correctly, however, my front speakers are coming from behind me and my rear speakers are coming from in front of me. As well as that, I cannot get sound from my front speaker and if I mess around with the THX settings, i sometimes manage to get the side channels coming from my rear or front speakers. This is very annoying. Why is the speaker assignment not automatic? WHAT IS THE POINT OF THE INSANE ASSIGNMENT MANAGEMENT SYSTEM!!!!
Does anyone have the slightest clue as to how I can get the right channels to come from the right speakers? I'm getting fed up with this. I wouldn't mind but my older Audigy card did all this by its-self!
Thanks in advance!

In no way a 300W Power Supply has enough power for all your stuff.
2 HDD's, a power-hungry Pentium, a xfi card, dvd burner and many other stuff ...
Problems like this can happen then if your power supply has not enough power to handle all this stuff.
Get a better powersupply that can handle your stuff and I am sure it will work again. In a few cases its also possible that YOU damage your hardware on this way, if it can not get enough stable power, it might mess up your hardware. I also already blowed up a harddisk one day because I have connected too much stuff to one cable. I had 3 HDD's, Mainboard, Lights, Fans and DVD connected to one single cable. All devices there did not get enough power, harddisks made crazy sounds (on/off/on/off very fast) and after that one of my HDDs was bad.
But no ... you can't blame anyone for this. In 99% a bad power supply should not damagae your hardware, it will just make sure it does not work anymore. Since you installed that hardware, YOU are responsible for this. If a hardware-dealer would have to install this card for you, it would be his fault, but now its yours.
BTW: Why do you expect that a 300W suppy is enough!? I mean really ... think about it! See what todays PS can do, take a look how much your pentium already needs ... There are at least 00W gone for your CPU, another 00 for your Videocard and just 00 left for ALLLL the other devices like your harddisks (20-30W each one), DVD, mainboard, soundcard ... In no way this will be enough. You must have missed the last 5 years ...
BTW: I don't think that the software audio console would not work when not having connected the y-power cable. I forget that cable too one time. My console did still work, just in games I got some strange problems a lot of times (no more sound for -2 minutes, crackling and other poroblems) which got solved after I plugged in the power-cable to soundcard.Message Edited by Homey-GER on 0-7-200705:42 AM

Similar Messages

  • Problem with Adobe Pro and Reader on terminal server

    Hi,
    We have have a Terminal Server environment with Adobe Pro and Reader. We have security for Adobe Pro, so only certain user has access to Adobe Pro and all users has access to Adobe Reader.
    Some users receive many email with pdf's attachments in Outlook and need to print these attachments. They use the Outlook function to print email and attachment automatically. The users who has access to Adobe Pro can print attachment automatically with no problem.
    The problem is user who only have access to Adobe Reader. The user can't print attachment automatically with the email, only the email is printed. But, they can open attachment and print with Adobe Reader. But, it's impossible to open each attachment because there are so many.
    Thanks for your help.
    Jonathan

    Hi,
    So if I understand correctly,
    1. You have installed Acrobat Pro & Reader on a Terminal server.
    2. You have created a security group in your Active Directory Users & Computers for users having access to Acrobat
    3. You have set permissions on C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe and C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrotray.exe on the terminal server and provided access only to the security group created above.
    4. Users are accessing the Terminal server through RDWeb or connecting remotely through MSTSC (RDP) or using a .RDP file
    5. Users get emails with PDF attachments and print the mail directly without opening the PDF in Reader.
    Users check the box to print the attachments with the mail (see snapshot below):
    Some questions:
    1. What is the OS and platform (x86 or x64) of the terminal server?
    2. What are the versions of Acrobat & Reader on the terminal server?
    Thanks,
    Vinod

  • Update problems with Premiere Pro and AAM (Adobe Applications Manager)

    I am using Premiere Pro CS6 via a Creative Cloud subscription and am having a problem. AAM (Adobe Application Manager) says that Premiere Pro needs updating to 6.0.1 but if I run Premiere Pro and check it's version, it says it already is 6.0.1 - so how would AAM fail to understand that PP is at 6.0.1 when PP knows that it is already there??
    So guess the real question is what does AAM use to decide what version the different apps are at and then tell you which updates you need to install? And how might it have gotten confused?
    And most of all, how to "un-confuse" AAM?
    Please don't suggest uninstalling PP - because with CC and AAM, then you have to re-download the entire app once again from inside AAM - it doesn't keep the install media around after it has installed it, but insists on downloading the same version yet again, and taking another hour or two to get back to where it was the last time it downloaded the app.
    Any suggestions??
    Thanks ...
    -Bob

    Hi Bob,
    I was having a similar issue.
    I was getting a dialog, when exporting from Pr informing me that there was a codec update available for Pr, and that I should update via help. But the AAM kept telling me that everything was up to date.
    I just tried to repeat the problem to respond to your post ... and it isn't happening anymore!
    It may not be happening anymore because I opened Adobe Media Encoder CS6 outside of Pr this morning. That is all I have done outside my normal rutine since the last time I had the annoying dialog...
    Kind of grabbing at straws.
    Cheers,
    DK

  • Problem with Logic Pro and Soft eLicenser on Mountain Lion?

    Hi!
    I have a bunch of Arturia synths, which requires the Soft eLicenser to work. This has always worked great with Lion, never any problems with eLicenser (never had to open it etc.)
    Now - I upgraded to Mountain Lion, and tested my synths to make sure everything was OK, experienced a bunch of problems, and did a full recovery to clean Mountain Lion.
    After installing the Arturia synths, and adding my licenses, I installed Logic. Everything worked fine!
    BUT!
    When I closed an Arturia synth within Logic, or closed Logic after running a project with one of these synths, I couldn't reopen any of these synths within Logic afterwards - In fact, I couldn't open the stand-alones either! And when I tried to open the eLicenser Control Center, it would just say "Reading eLicensers" forever. After a reboot, everything is OK.
    I can open and close eLicenser Control Center and standalone synths as many times as I want, as long as I don't open Logic, and then Arturia synths as an AU in Logic.
    I found a workaround: Open the eLicenser Control Center, and let in run in the background (cmd+H), and then open Logic. Then I could open Arturia synths and close them, close Logic and reopen etc. without any problems at all. NO PROBLEMS.
    Until I close the eLicenser Control Center, then I have to reboot to be able to start it again.
    I hope you understand what I mean here. It's a bit hard to explain.
    In short terms: Logic makes Soft eLicenser crash when a eLicenser synth has been opened as an AU.
    The same problem is when scanning the AU with AU manager. eLicenser window should be open before scanning.
    Does ANYBODY have the same problems? Can anyone who has these applications test it out?

    So it definitely seems to be a issue with Logic.
    I can't force this error in 10.7.X no matter how hard I try, but in 10.8.2 it's definitely Logic messing things up.
    Could it be auvaltool which has a bug? Or is that only run with AU manager on validation?
    Hopefully this discussion can get some attention, and maybe it could be corrected. I guess a lot of Logic Pro users also has eLicenser Control Center for validation of their products.

  • Problem with Premiere Pro and Creative Cloud.

    Hello, I have 2 big problems, when I lauching Premiere Pro, the software closes automatically after 5 seconds. It's the same thing with Photoshop.  The second is about the software of Creative cloud, there isn't any information in the software, just a white page.. Please help me !

    Neoriser are you referring to the Creative Cloud Desktop application being blank?
    If you are facing crashing issues with Premiere Pro CC I would recommend posting a separate discussion in the Premiere Pro forum at http://forums.adobe.com/community/premiere.

  • Problem with Macbook pro and Airport Express!!!

    I'm having the same problem I have seen others with right now with my macbook pro and my airport express. I have set up and reconfigured the A.Express 3 times now. I have the green light, i have the Ethernet configured, I have full bars of reception but I cannot access the signal. meaning I can not go online even though everything is set up correctly and says that it's good to go. Anybody have any advice?
    Is it an issue with having to re access the network I created with the Airport utility?
    It worked the first time I configured the A. Express with my macbook pro no problem. Then suddenly my computer was just not getting internet. Even though all the settings were ok and I was even getting full bars reception from the device on my comp. So I reset the A.Express and have been having the problem mentioned above since that point. Please help me if you have any advice. Thanks so much in advance.

    I had the same problem, and to test if I was connected launched Safari and Safari after a few seconds of not connecting, it shows you a dialog box, with options to follow up, I follow the dialog box and like magic I am connected to the Internet.

  • Monitor problems with Mac Pro and Leopard

    I can't turn energy saver off.I have two LCD monitors connected, one 19" Viewsonic VX924 and one 30" Dell3007WFPHC . I set energy saver:Put the display(s) to sleep when computer is inactive for Never.
    Yet I can turn the monitors off and back on later and it's put the Viewsonic to sleep ,but not the Dell.
    I then open the energy saver system preferences again and low and behold it's changed itself back to sleep at 26 minutes.Ghost in the machine?Why doesn't it put the Dell to sleep as well?????Why does it keep changing back to 26 minutes regardless of how many times I set it to never and lock it?
    I even tried just using the Viewsonic only and setting to never,I also trashed a pref file I thought was energy saver , still same behavior, this is a REALLY big hassle ,because I have to restart every time just to get this monitor back up.
    Any clues?
    Many thanks!
    Hayes
    Memphis,Tn.

    I think there are some powermanagement prefs in your account and in /Library but I also read of problems with ViewSonic VX back when the Mac Pro came out in 9/06.
    I would give the SMC button a good 'kick' and see if that helps.
    And when you restart, this is normal safe restart, or forced?
    SMC button, this is restart button on the inside of the mac?
    It's always a safe restart,the whole computer doesn't go down, it's just the viewsonic power light blinks on and off and there is not much I can do to get back up quickly, but restart. I have played with display settings and got it back before, but that's hit or miss and very time consuming.
    Thanks you so so much for your help and suggestions!

  • Problem with premiere pro and encore with win7 enterprise 64-bit.

    We are a college with approx 500 pc's running win7 enterprise 64-bit.  Premiere pro and Encore will only open with admin login, not user login.  All other packages ok. Any suggestions as to why this is?

    Our lab has just had CS6 installed on it, running Win 7 enterprise. A user account will open a Premiere Pro project. I've done it. That was only to check that everything worked ok. I edited a couple of clips and stuck them on a sequence (16:9 PAL DV) and it played them ok and the project was saved back to the USB hard drive OK.
    I have also opened up encore, made a new project and saved it to the USB HDD. No assets were added to it, just checking that the preference files had copied from the central server to the machine, so that users have certain options already pre-selected.
    What exactly are the problems with Win 7 enterprise?
    Andrew

  • Problem with Premiere Pro and Old School X3100

    Hi everyone,
    Got a problem here and really looking for help .  I know the intel 965 or X3100 chipset/GPU (in a Dell inspiron 1720 running Win 7 64 bit) is way old school, but as we're waiting for a couple of i7/i5 laptop upgrades, this is what I have to resort to for some minor mobile SD editing (nothing extreme but 15-30s short commercials). With the current Intel driver (8.15.10.1930), the preview monitors (source and sequence) do not work.  They're simply a blank frame (even after I render the sequence).  It seems to be the Intel drivers whooping my butt as there is no problems with the standard W7 WDDM 1.1 display driver, except the computer isn't stable with freezes on wake (and no OpenGL support in PS... which isn't a big deal).  I've also tried Vista 64 drivers in compatibility mode with no luck.
    The rest of the CS4 suite works great.  It is not the trial version and I've tried PP 4.0, 4.01, 4.1, 4.2, 4.2.1 (suggested by another post), and reinstallation.  I've also tried changing settings in the Intel drivers and... even modded 965 drivers.
    I know the X3100 is quite common (maybe not among PP users...) so any experience you might have would be awesome.  Maybe an older Intel driver?  If you can help me, I'll name my laptop after you!  ...unless you realize that could actually be an insult   Thanks!

    This hardware sub-forum is a good place to read about what will run CS5
    While HD editing (which I won't do) will require a RAID for data, what I am going to build for SD editing with CS5 and Win7 64bit is listed near the top of my notes page http://www.pacifier.com/~jtsmith/ADOBE.HTM
    If you are adept with tools... build your own and save $$

  • Audio Unit Problem with Logic Pro and Mainstage

    When I go to launch my apps, both Logic Pro and Mainstage get stuck loading an AppleAUspeechsynthesis or something along those lines. It never makes it past there and I either have to force quit or it quits itself. I can press control while launching Logic Pro, but then I only get basic MIDI. I just tried an archive and install and I'm in the process of reinstalling Logic Pro right now. Does anyone know what might be causing this?

    I just tried pasting my crash report. It seems like it is too long to post?

  • SERIOUS Problem with mac pro and kernel panics

    Hi guys, I have a mac pro with 6 gigabytes of RAM + a RAID 0+1 system with 4 750 gigabytes HD's. ( 2 drives work in stripped mode, and the other 2 drives mirror them )
    I was experiencing some frecuent kernel panics when using final cut or trying to watch DVD's a few weeks ago. I saved some error logs then and uploaded them to my e-mail. The problem is that now the frequency of the panics is so high that the computer has turned unusable, it reaches the desktop without panics, but when I click finalcut and it starts opening , it panics all the time, if I start to open folders, it panics, anything I try = panic.
    Weeks ago I made the Apple Hardware test, testing the memory a lot and the memory seemed to be fine,
    Could you guys help me to identify the source of this?, I am desperate because the MacPro is my Working tool. Is there a way to check the hard drives also? ( remember I have raid 0+1 )
    Here are the error logs that I managed to capture.
    LOG 1
    Sat May 31 22:47:56 2008
    Machine-check capabilities (cpu 0) 0x0000000000000006:
    6 error-reporting banks
    Machine-check status 0x0000000000000004
    machine-check in progress
    MCA error-reporting registers:
    IA32MC0STATUS(0x401): 0x1400000000000000 invalid
    IA32MC1STATUS(0x405): 0x0000000000000000 invalid
    IA32MC2STATUS(0x409): 0x0000000000000000 invalid
    IA32MC3STATUS(0x40d): 0xb22000cf0002010a valid
    MCA error code : 0x010a
    Model specific error code: 0x0002
    Other information : 0x002000cf
    Status bits:
    Processor context corrupt
    Error enabled
    Uncorrected error
    IA32MC4STATUS(0x411): 0x0000000000000011 invalid
    IA32MC5STATUS(0x415): 0xb20000300c000e0f valid
    MCA error code : 0x0e0f
    Model specific error code: 0x0c00
    Other information : 0x00000030
    Status bits:
    Processor context corrupt
    Error enabled
    Uncorrected error
    panic(cpu 0 caller 0x001A860C): Machine Check at 0x78478fb9, thread:0xc1374f0, trapno:0x12, err:0x0, registers:
    CR0: 0x80010033, CR2: 0x7335b564, CR3: 0x00d50000, CR4: 0x00000660
    EAX: 0x00000000, EBX: 0x00000050, ECX: 0x00000001, EDX: 0x09b858b0
    ESP: 0x7f57bc40, EBP: 0x7f57bd38, ESI: 0x09b858b0, EDI: 0x00000001
    EFL: 0x00010046, EIP: 0x78478fb9
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x4e9e28 : 0x12b0e1 (0x457024 0x4e9e5c 0x13321a 0x0)
    0x4e9e78 : 0x1a860c (0x460248 0x78478fb9 0xc1374f0 0x12)
    0x4e9f58 : 0x19fbe3 (0x4e9f70 0x0 0x0 0x0)
    0x7f57bd38 : 0x1a9b07 (0xffffffff 0x7fffffff 0x202 0x6)
    0x7f57bd58 : 0x1a2a4e (0x0 0x538680 0xaad3193a 0x3f4)
    0x7f57bd88 : 0x1357b3 (0x0 0xaad3193a 0x3f4 0x538568)
    0x7f57bde8 : 0x135e53 (0x1 0xc1374f0 0x9a91c7c 0x1)
    0x7f57be38 : 0x136941 (0xc13750c 0x30 0x7f57be98 0x13930a)
    0x7f57be78 : 0x1369e5 (0x138fb3 0x0 0x0 0x1e)
    0x7f57be98 : 0x13973a (0x138fb3 0x0 0x80 0x2)
    0x7f57bf08 : 0x1398cd (0xa4d69cc 0x9a98058 0x0 0x37a6e7)
    0x7f57bf38 : 0x37a7cd (0x4c03 0x4d03 0x37a6e7 0x37a813)
    0x7f57bf78 : 0x3dbe77 (0xa077780 0xc13c740 0xc13c784 0x0)
    0x7f57bfc8 : 0x19f084 (0xc0182e0 0x0 0x1a20b5 0xbbf02e8)
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xb04ebed8
    BSD process name corresponding to current thread: Final Cut Pro
    Mac OS version:
    9C31
    Kernel version:
    Darwin Kernel Version 9.2.0: Tue Feb 5 16:13:22 PST 2008; root:xnu-1228.3.13~1/RELEASE_I386
    System model name: MacPro1,1 (Mac-F4208DC8)
    LOG 2
    Sun Jun 1 18:59:34 2008
    Machine-check capabilities (cpu 0) 0x0000000000000006:
    6 error-reporting banks
    Machine-check status 0x0000000000000005
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32MC0STATUS(0x401): 0x1000000000000000 invalid
    IA32MC1STATUS(0x405): 0x0000000000000000 invalid
    IA32MC2STATUS(0x409): 0x0000000000000000 invalid
    IA32MC3STATUS(0x40d): 0xb620000f0002010a valid
    MCA error code : 0x010a
    Model specific error code: 0x0002
    Other information : 0x0020000f
    Status bits:
    Processor context corrupt
    ADDR register valid
    Error enabled
    Uncorrected error
    IA32MC3ADDR(0x40e): 0x00000000279ce9c0
    IA32MC4STATUS(0x411): 0x0000000000000011 invalid
    IA32MC5STATUS(0x415): 0xb200001806000e0f valid
    MCA error code : 0x0e0f
    Model specific error code: 0x0600
    Other information : 0x00000018
    Status bits:
    Processor context corrupt
    Error enabled
    Uncorrected error
    panic(cpu 0 caller 0x001A860C): Machine Check at 0x78478fb9, thread:0xa70ce40, trapno:0x12, err:0x0, registers:
    CR0: 0x80010033, CR2: 0x73b17564, CR3: 0x00d50000, CR4: 0x00000660
    EAX: 0x00000000, EBX: 0x00000050, ECX: 0x00000001, EDX: 0x09b858b0
    ESP: 0x7f23f890, EBP: 0x7f23f988, ESI: 0x09b858b0, EDI: 0x00000001
    EFL: 0x00000046, EIP: 0x78478fb9
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x4e9e28 : 0x12b0e1 (0x457024 0x4e9e5c 0x13321a 0x0)
    0x4e9e78 : 0x1a860c (0x460248 0x78478fb9 0xa70ce40 0x12)
    0x4e9f58 : 0x19fbe3 (0x4e9f70 0x0 0x0 0x0)
    0x7f23f988 : 0x1a9b07 (0xffffffff 0x7fffffff 0x202 0x6)
    0x7f23f9a8 : 0x1a2a4e (0x0 0x538680 0xeec06eb 0x43f)
    0x7f23f9d8 : 0x1357b3 (0x0 0xeec06eb 0x43f 0x538568)
    0x7f23fa38 : 0x135e53 (0x1 0xa70ce40 0x9a91c7c 0x14025b)
    0x7f23fa88 : 0x136941 (0xa70ce5c 0x8c98967c 0x0 0x0)
    0x7f23fac8 : 0x1369e5 (0x0 0x0 0x0 0x0)
    0x7f23fae8 : 0x8c961a05 (0x0 0x0 0x64 0x3e8)
    0x7f23fb48 : 0x8c9508aa (0xbc23600 0x7b01c 0x7f23fb68 0x698fc000)
    0x7f23fb78 : 0x8c950978 (0x69732000 0x7b01c 0x1 0x1)
    0x7f23fb98 : 0x8c91fe8f (0x69732000 0x7b01c 0x40000 0x15)
    0x7f23fc88 : 0x4375c0 (0x698c7000 0x1 0x7f23fcdc 0x7f23fcd8)
    0x7f23fcf8 : 0x43be19 (0x698c7000 0x1 0xa63b6b8 0x1)
    0x7f23fd28 : 0x43bf30 (0x698c7000 0x1 0xa63b6b8 0x7f23fd58)
    Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.GeForce(5.2.4)@0x8c903000->0x8c989fff
    dependency: com.apple.NVDAResman(5.2.4)@0x8c500000
    dependency: com.apple.iokit.IONDRVSupport(1.5)@0x7f61a000
    dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x781f0000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5.1)@0x7f871000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    9C31
    Kernel version:
    Darwin Kernel Version 9.2.0: Tue Feb 5 16:13:22 PST 2008; root:xnu-1228.3.13~1/RELEASE_I386
    System model name: MacPro1,1 (Mac-F4208DC8)

    What you mention is really interesting , maybe I could try to benchmark the card very hard to see if I get the panics there. I will try that for sure, because my RAID wasn't actually a 0+1. It's what they call a RAID 10 , ( two groups of mirrored drives, + striped )
    It's like this post in macosrumors, but instead of two groups of striped disks, the big group is striped, and I got two smaller mirrored groups.
    http://forums.macrumors.com/showthread.php?t=445731
    And I think that sould be working just fine without the RAID PCI-X card right ? ( maybe I'm wrong here , that's why I need your input guys . )

  • Probleme with macbook pro and avast

    Hello,
    please i have a macbook pro mi-2009 with mac os x 10.8.5 and i installed avast and then all the applications don't want to start unless safari and default software and when i restart my mac he don't want to start again and when i started with windows boot camp he start normal.
    Sorry for my english
    and thanks

    i tell you that the machine don't want to start with mac os it start just with windows, and i don't have a time machine to restore to the backup

  • Firestore Importing Problems with MacBook Pro and FCP

    Hello,
    I've encountered a problem trying to import my P2 files from my brand new Firestore and for some reason my trusty MacBook Pro doesn't acknowledge their existence. Here's my process so far:
    1.) I captured the footage in P2 mode at 720/24P
    2.) I initially just tried to plug the Firestore into the computer.
    3.) Then I saw that I had to set it up into DD Drive mode. I did this before running the "Organize P2" utility.
    4.) When I opened the Firestore's icon on the desktop I saw only the ten reel folders (numbered 0-9) and the log folder. None of these folders had any clips inside them.
    5.) After checking the manual again I hit the "organize P2" utility. This did not make any files show up.
    6.) I tried "Import Panasonic P2" inside of FCP, but it doesn't see the files either.
    7.) The only encouraging factor is that I CAN playback the files on my HVX200 from the device.
    BUT HOW CAN I GET THEM INTO FINAL CUT PRO!?!?!?!?!
    Thank you so much,
    Stef

    BUT HOW CAN I GET THEM INTO FINAL CUT PRO!?!?!?!?!
    FCP>main menu>file>Log & Transfer window

  • Printing problems with macbook pro and canon 4150

    I have a Macbook Pro running 10.6.8.  I also have a Canon imageclass MF4150 printer.  I downloaded from the canon website the driver Mac-UFR II Printer Driver V2.25.  When I try to print, I get an error message.
    Can anyone suggest a generic printer driver that would work?
    Thanks in advance for the help.
    kate

    I have a NetGear WGR614 that has worked without issue for a macmini, my MBP and direct-wired PCs and Linux towers.  It only has issues when ATT DSL causes connectivity issues what require them fixing things in their connection centers.
    WGR614 is a few years old, but they still sell it.
    I was warned years ago against DLink.
    LinkSys was recommended almost as more reliable then NetGear.
    But then Airport Express is an Apple product and Apple has direct links to set them up from your Mac.

  • X-FI driver causes speaker volume problems with remot

    I have the X-FI elite pro and after the latest driver update, using the auto update, my remote controls only the front left speaker's volume only. This not a huge problem, but a problem still. Is there any fix for this? Does Creative know about this? If so, when is the time estimate for an official fix?
    Thanks for any info!

    I also expect a fix for this, we will probably have to wait for another "critical update". I plan on reverting to the previous drivers until then...
    But I was wondering if this was happening under Vista as well?

Maybe you are looking for