X-Fi Speaker configuration - can't get 5.1 work
Using a Soundblaster X-Fi Elite Pro and Logitech Z-5500 speakers.
I'm starting to lose my patience with the crappy drivers. No matter what I do, I can't get the speakers to work in 5.. I can get a pseudo-surround effect by enabling CMSS, but it isn't proper surround.
My biggest problem lies with the speaker setup console, where I test the speakers.
With CMSS set to "Stereo XPand", then using the speaker setup utility to test:
Click on centre, sound is ok.
Click on front right or front left, and the sound also comes from the centre, but it's very soft.
Click on rear-left, sound comes from front left and barely audible on rear left.
Click on rear-right, sound comes from front right and barely audible on rear right.
With CMSS set to "Stereo Surround":
Centre plays on all channels.
Front left plays on front left and rear left.
Front right plays on front right and rear right.
Clicking on rear right and rear left play on fronts, as above.
With CMSS disabled:
All sound gets played on front left and front right - centre and surround speakers don't work.
I've re-installed my drivers three times now, and I've played with all the settings in the audio-creation console.
I have set the driver to play through 5. speakers, so don't suggest that I change that
What else can I do?
Sure, CMSS is a great feature for stereo content to be played on a multi-speaker system, but you guys are missing the point.
I have 5. sources here that are not working properly. My DVDs don't have sound on the centre channel or rear channels. CMSS might fix this, sure, but why should I need to upmix a 5. channel?
Moreover, when I click on the rear left speaker, and the lady says "LEFT SURROUND" I sure as hell want sound coming out of my REAR LEFT speaker. I don't see a little popup box that goes "Oh hey, the sound is coming from the wrong speaker but that is normal."
I have games and movies that output in true 5.. I have a sound system that is capable of true 5.. My PS2 will happily play my DVDs in 5., and I can use the THX tests on some of my DVDs, playing on my PS2, to hear sound coming from each speaker, individually.
My $250 sound card can only pretend to do it right. What gives, Creative?
How difficult is it to just write a sound driver that outputs the six discrete channels via the analogue outputs?
Similar Messages
-
Can´t configure secondary e-mail. That is I have the icloud account and earlier bought an account för my wife. Now she can´t get it to work. Where the h--l do I configure this?
Welcome to the Apple community.
If you are referring to adding a secondary account, to a single device, then you can do this at system preferences >mail, contacts & calendars. -
My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?
Hi there Graham!
I have a couple of articles that can help you troubleshoot this issue. First, if you are downloading HD content, you will need to know the system requirements for HD playback, which can be found here:
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/ht3209
Next, you will want to check your video playback settings on your Windows machine. The steps for that can be found right here:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Hope that helps. Thanks for using the Apple Support Communities!
Cheers,
Braden -
Can't get VPN to work on RV220W
I am a home office user who bought a RV220W router for the speed advertised on smallnetbuilder. I am trying to set up the VPN but can't get it to work with the Quick VPN client. I am using dyndns to manage the dynamic IP and have entered that into the setup noted below. I can access the router remotely (remote administration) when enabled using the dyndns address so I know that is working.
IKE Policy Table
General
Policy Name: krafty001vpn
Direction / Type Responder
Exchange Mode: Aggresive
Enable XAUTH Client: None
Local Identification
Identifier Type: FQDN
FQDN: krafty001.dyndns.org
Peer IKE Identification
Identifier Type: Remote Wan IP
FQDN: krafty001.dyndns.org
IKE SA Parameters
Encryption Algorithm: 3DES
Authentication Algorithm: SHA-1
Authentication Method: Pre-Shared Key
Pre-Shared Key: xxxxxxxxx
Diffie-Hellman (DH) Group: Group 2 (1024bit )
SA-Lifetime: 28800 Seconds
VPN Policy Table
Add / Edit VPN Policy Configuration
Policy Name:
krafty001vpn
Policy Type:
Auto Policy
Remote Endpoint:
FQDN
krafty001.dyndns.org
NETBIOS:
Enable
Local Traffic Selection
Local IP:
ANY
Start Address:
End Address:
Subnet Mask:
Remote Traffic Selection
Remote IP:
ANY
Start Address:
End Address:
Subnet Mask:
Split DNS
Split DNS:
Enable
Domain Name Server 1:
Domain Name Server 2:
(Optional)
Domain Name 1:
Domain Name 2:
(Optional)
Manual Policy Parameters
SPI-Incoming:
SPI-Outgoing:
Encryption Algorithm:
3DES None DES AES-128 AES-192 AES-256 AES-CCM AES-GCM
Key-In:
Key-Out:
Integrity Algorithm:
SHA-1 SHA2-256 SHA2-384 SHA2-512 MD5
Key-In:
Key-Out:
Auto Policy Parameters
SA-Lifetime:
3600
Seconds KBytes
Encryption Algorithm:
3DES None DES AES-128 AES-192 AES-256 AES-CCM AES-GCM
Integrity Algorithm:
SHA-1 SHA2-256 SHA2-384 SHA2-512 MD5
PFS Key Group:
Enable
DH-Group 1 (768 bit) DH-Group 2 (1024 bit) DH-Group 5 (1536 bit)
Select IKE Policy:
krafty001vpn
Quick VPN Setip
User Profile: homevpn
User Name krafty001vpn
Password: xxxxx
Server Address: krafty001.dyndns.org
Port for QuickVPN: Auto
Any help in identifying what setup component I have configured incorrectly would be appreciated
ThanksI am not sure this will help but make sure the following is set correctly:
Currently VPN is somewhat broken on all versions of firmware of the RV220W including beta where VPN will ONLY negotiate on 443. If you are port forwarding 443 to a server or something else it will fail. You must allow the VPN to authenticate on 443. The router SHOULD be able to connect on 60443 as indicated on the QUICKVPN software however it doesn't this has been confirmed by a CISCO engineeer I have been speaking with regarding my VPN woes. Currently there is NO ETA on this fix.
But since you didn't mention if your 443 ports were being routed elsewhere I figured i would lay out that information here incase you where. Also I strongly recommend contacting Cisco Support for the beta firmware it makes the RV220W much better.
Also the reason for the update to the beta firmware it resolves the hair pinning problem which could also lead to VPN issues. -
Can't get 5.1 working on Audigy 2
Hi all
I've recently gotten myself an improved Graphics card that allows me to watch hi-def MKV files via Media Player Classic Homecinema. I can't get the surround sound working on them though. I've had a Creative Audigy 2 card for years linked up to an Inspire 6.1 system. I've gotta be honest though, I've always just had the CMSS 3D option activated so, although all the speakers have always worked, it's never been true surround sound. How on earth do I configure everything to get it all working correctly? Is it maybe the Media Player software that's at fault?
Can anyone help...brianlong,
The link is correct to link you to the main Knowledgebase page. You will need to type in 'SID4858' in the Search by Keyword section. If you are unable to access the link, the Knowledgebase is also located at the 'Support' section at the top of the drop-down menu.
Or type in 'front' as the keyword and look under 'Speaker test only outputs from two front speakers' listing.
Jason -
The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04
In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
Cisco 1812 wireles setup, can't get it to work
Hello everyone,
I've read trough the "871 wireless setup" topic, which I found very helpful, but I still can't get my wireless working. Basically I have a Cisco 1812W and I would like both wireless and wired to be on the same subnet. We aren't using DHCP, so the IP's are all static (even for the wireless clients). I can connect to my wireless SSID, but ping doesn't go trough either way. Wired connections are working fine. So the wireless client is connected, but has no IP address as far as the router goes (show Dot11 associations shows it's IP as 0.0.0.0) , but the wireless client does have an IP set up.
I guess I'm overlooking something in my config, so here it is (i took out the firewall rules and aaa setup, they aren't relevant if i'm not mistaken and there's a limit to post size):
ip cef
ip tcp synwait-time 10
no ip bootp server
ip name-server <removed>
ip name-server <removed>
crypto pki trustpoint TP-self-signed-1358229530
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1358229530
revocation-check none
rsakeypair TP-self-signed-1358229530
crypto pki certificate chain TP-self-signed-1358229530
certificate self-signed <removed>
quit
username <removed>
bridge irb
interface Null0
no ip unreachables
interface FastEthernet0
description $ETH-WAN$$FW_OUTSIDE$
ip address extip extsubnet
ip access-group 101 in
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip nat outside
ip inspect sdm_ins_in_100 in
ip inspect SDM_MEDIUM out
ip virtual-reassembly
ip route-cache flow
duplex auto
speed auto
interface FastEthernet1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
shutdown
duplex auto
speed auto
interface BRI0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation hdlc
ip route-cache flow
shutdown
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface FastEthernet9
interface Dot11Radio0
description 802.11g
no ip address
encryption mode ciphers tkip
ssid <removed>
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 <removed>
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1
description 802.11a
no ip address
shutdown
encryption key 1 size 40bit 7 1ED10A3EC0C5 transmit-key
encryption mode wep mandatory
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
interface Vlan1
description $FW_INSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
ip route-cache flow
bridge-group 1
interface BVI1
ip address <internal router ip> <subnet>
ip access-group 100 in
ip nat inside
ip virtual-reassembly
ip route 0.0.0.0 0.0.0.0 <external router IP> permanent
ip flow-top-talkers
top 5
sort-by bytes
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
<bunch of static nats>
<access rules>
no cdp run
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
line aux 0
line vty 0 4
access-class 102 in
password 7 <removed>
transport input ssh
scheduler allocate 4000 1000
webvpn context Default_context
ssl authenticate verify all
no inservice
endOkay, I've somewhat figured it out. Apparently my WPA-PSK configuration doesn't work with the integrated Broadcom adapter found in the laptop I was testing it with.
Either that or my WPA-PSK configuration is broken.
I switched over to an open network with no encrpytion and everything works now. -
[SOLVED] I can't get virtual hosts working. What's wrong?
What I've decided to do is try to set up each domain name in the user folder to whom it belongs (for example: /home/username/somedomain.com/htdocs). I can't get it to work though. I keep getting an error saying that there's no index file (although there is) or that the location isn't readable (although it is). I'm trying to make it so that if the domain name matches with a virtual host section in httpd-vhosts.conf that a specific DocumentRoot will be loaded for that domain, etc. But, if the domain name points to my server but doesn't match, then I want the default location to work. I can't seem to make this work.
This is my http.conf:
ServerRoot "/etc/httpd"
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#CUSTOM
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
User http
Group http
</IfModule>
</IfModule>
ServerAdmin [email protected]
DocumentRoot "/srv/http/default/htdocs"
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
<Directory "/srv/http/default/htdocs">
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
<IfModule dir_module>
DirectoryIndex index.php,index.html
</IfModule>
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
ErrorLog "/var/log/httpd/error_log"
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog "/var/log/httpd/access_log" common
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
#Scriptsock /var/run/httpd/cgisock
</IfModule>
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
DefaultType text/plain
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
</IfModule>
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
#CUSTOM
Include conf/extra/php5_module.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
And here's my httpd-vhosts.conf:
NameVirtualHost *:80
<VirtualHost *:80>
ServerName 45.117.5.40
ServerAdmin [email protected]
DocumentRoot "/srv/http/default/htdocs"
ErrorLog "/srv/http/default/log/error_log"
CustomLog "/srv/http/default/log/access_log" common
</VirtualHost>
<VirtualHost *:80>
ServerName somedomain.com
ServerName www.somedomain.com
ServerAdmin [email protected]
DocumentRoot "/home/normaluser/somedomain.com/htdocs"
ErrorLog "/home/normaluser/somedomain.com/log/error_log"
CustomLog "/home/normaluser/somedomain.com/log/access_log" common
</VirtualHost>
So, for example, I want it to be so that if I visit http://45.117.5.40 that it'll show the stuff ftom /srv/http/default/htdocs but if the domain name matches somedomain.com then I want the server to show the content from /home/normaluser/somedomain.com/htdocs.
What currently happens is that if I visit http://45.117.5.40 or somedomain.com, they both show the same content from /srv/http/default/htdocs.
If I comment out the first VirtualHost section, then everything stops working and I see the default "Access forbidden!" message.
What am I doing wrong?
Last edited by trusktr (2012-04-13 06:15:41)I fixed it. In case any newbs come across this, I had to add a new <Directory> section for the DocumentRoot of the virtual host. Simply adding the VirtualHost entry in the vhosts file isn't enough.
For example, for the "somedomain.com" vhost in the example above to work, I added this to http.conf:
#This must match with the same location as DocumentRoot in httpd-vhost.conf.
<Directory "/home/normaluser/somedomain.com/htdocs">
#Put whatever directives you want in here
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
Let me know if you need any clarification.
Last edited by trusktr (2012-04-13 06:16:02) -
I purchase the Forms plus, bywidgets.mu, and can't get it to work. any help?
I purchase the Forms + bywidgets.mu
I've followed the directions on the weblink (https://widgets.mu/se/FormsPlus/demo/)
and still can't get anything to work.
I just keep getting <> inside a box and that's it.
Help please!Hi Lisa,
Do you have a URL where I can take a look at the issue? It may be a configuration issue or it may be a bug so I just want to check and make sure.
In terms of the radio buttons one, I just published up update to the Forms+ Widget this morning that includes a new way to do grouping for radio buttons. Creative Cloud should download the updated version of the .mulib file into your downloads folder (and it should now be called something like FormsPlus Bundle.mulib), and you can double click that to add the updated widgets to your Muse library. The one I'm referring to in particular is called the "Radio Group (Box Selection)" widget. Basically, when you drag the widget out onto the page, it shows a dotted line box and you simply drag and resize the box around the radio items you'd like to group together. The box itself won't be exported so you don't have to worry about that, but it will allow you to visually group them instead of doing so with labels.
Let me know if you have any trouble getting the new update or using the box selection widget and I'd be happy to help further.
Thanks,
Andrew -
hey guys, I can't get netcfg2 to work on my machine... really annoying upgrade check this:
[network.d]% diff examples/wpa.example home
1,2c1,2
< CONNECTION="wireless"
< INTERFACE=wlan0
> CONNECTION="home"
> INTERFACE=eth1
5,6c5,6
< ESSID="mynetwork"
< KEY="SomePasskey"
> ESSID="Lebowski"
> KEY="foobar"
[network.d]% sudo netcfg2 home
> home is not a valid connection, check spelling or look at examples
Any ideas? Also, why do I have to specify CONNECTION="foo"? the filename is enough to get the name, no?
chris
Last edited by delmonico (2008-03-28 17:54:41)I can't get work netcfg2...
if I run
iwconfig wlan0 essid SpeedTouch5F3851 enc open s:LesPiTTareL
it works great, I can connect to my wireless network but...
if I configure my /etc/network.d/celadina in this way:
CONNECTION="wireless"
DESCRIPTION="Connessione wireless casa Bergamo"
INTERFACE=wlan0
ESSID=SpeedTouch5F3851
KEY=LesPiTTareL
SECURITY=wep
IP="static"
IFOPTS="192.168.1.70 netmask 255.255.255.0"
GATEWAY=192.168.1.254
and running
netcfg2 celadina
I get this error message
:: celadina up - Could not set wireless configuration [FAIL]
[root@Arials skioppetto]# "Set Encode" (8B2A) :
SET failed on device wlan0 ; Invalid argument.
I think the error is in SECURITY but I can0t find a solution... I've tried also with IWOPTS and if I don't
define SECURITY it doesn't give any errors but it can't connect becouse key remains off
I use rt61 wireless module; when I connect trough the first way I don't get any wep modules loaded even if it works...
I think the problem could be the kernel module.
What do you think about? -
Can't get X to work properly (ATI AIW 9800)
Hello,
I have a few problems. My first problem is this. The dpi was messed up when i first install, so i thought no big deal, I'll just go and configure the defaultserverargs setting in the startx script to "-dpi 75". This does not seem to work. Secondly,I can't get gnome to work as my default window manager. I put this line in my .xinitrc file in my home directory:
exec gnome-session
I also tried this:
exec /opt/gnome/bin/gnome-session
My last problem is that when i try to install the ati fglrx drivers with the stock kernel arch package but whenever the fglrx module is called, it says that the module doesn't exist. One thing i might mension which might be of importance is that i compiled a custom kernel during install without SMP and preemtivity so i could use my rt2500 wireless card. Thanks in advance for the help
cheers,
-Lukassinisterguy: You're going to need to build your own kernel module, afaik you can't just symlink a module built for another kernel and expect it to work.
As root, run
abs
Once that's done (it'll check out a bunch of stuff from cvs), change to your normal user and either make a directory for the new package, or cd to some temp directory, then:
cp /var/abs/extra/modules/ati-drivers-arch/* .
vim PKGBUILD
then make the following changes:
pkgname=ati-drivers-arch
to
pkgname=ati-drivers-custom
(or whatever you want to call the package)
depends=('ati-drivers' 'kernel26')
to
depends=('ati-drivers')
source=(https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/fglrx_6_8_0-$pkgver-1.i386.rpm fireglcontrol.desktop)
to
source=(http://www2.ati.com/drivers/linux/fglrx_6_8_0-$pkgver-1.i386.rpm fireglcontrol.desktop)
(for some reason I can never get the source from the https address through makepkg.)
and
_kernel=2.6.15-ARCH
to
_kernel=`uname -r`
Save and quit, then run
makepkg
- this'll make you a brand new kernel module package that you can install with
pacman -A ati-drivers-custom-8.22.5-2.pkg.tar.gz
You'll need to update this package every update to the ati-drivers in the same way you originally built it.
If you need more information, ABS is a good place to look, as well as man makepkg.
</abs tutorial> -
i have an airport extreme attached to cable, then one airport express to extend the range. when i try to add an additional airport express to extend range in another area of house, can't get it to work. utility says it has found a new base station and asks if i want to use it. if i click yes, then the old setup is disabled.
Ok, thanks for clarifying which models you have. Please see the following Apple Support article on how to configure these older base stations for a Wireless Distribution System (WDS).
-
Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
Thanks, Doctor MarkPort Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course. -
Can't get mic to work on Acer TravelMate P
Hello there Arch forum.
@mod
I'm not sure if this post is best placed in laptop/media or newbie corner, I have used Arch for 2 years now but I'm a noob on pulseaudio.
Feel free to move it to the desired location.
Anyone have any suggestions on how to get my head set microphone to work in mumble on my Acer TravelMate P laptop.
I have tried different things that was suggested on the PulseAuido Troubleshooting page.
But I think its a problem with a hardware button that can mute the microphone located just beneath the screen.
When press the button nothing happens..
Output of some commands.
$ arecord --list-devices
**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: ALC282 Analog [ALC282 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ pacmd list-sources
3 source(s) available.
index: 0
name: <alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: front-left: 69160 / 106% / 1.40 dB, front-right: 69160 / 106% / 1.40 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
monitor_of: 0
card: 0 <alsa_card.pci-0000_00_03.0>
module: 6
properties:
device.description = "Monitor of Built-in Audio Digital Stereo (HDMI)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xb0630000 irq 48"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0a0c"
device.product.name = "Haswell-ULT HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
* index: 1
name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1950
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: yes
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
monitor_of: 1
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb0634000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 2
name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: front-left: 41353 / 63% / -12.00 dB, front-right: 41353 / 63% / -12.00 dB
balance 0.00
base volume: 5206 / 8% / -66.00 dB
volume steps: 65537
muted: yes
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC282 Analog"
alsa.id = "ALC282 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb0634000 irq 46"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC282"
alsa.components = "HDA:10ec0282,1025081e,00100003"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
active port: <analog-input-internal-mic>
Thanks in advanceRe: Can't get Mic to work? I'm using the Steelseries Siberias headset, with a standalone Zalman mic. I never unplugged them, I only reformatted from a cracked verion of Windows 7, to a legit version of Windows 7. The versions were actually the exact same, and now I regreat Formatting.
Here are some of My PC's Specs
http://img9.imageshack.us/i/specsq.png/
I'm using the ATI Radeon 4870
Creative XtremeGamer
http://img704.imageshack.us/i/sound.png/
http://img684.imageshack.us/i/drivers.png/
I've just gottren really frusterated. I'm about ready to go back down to XP just to get this to work, I use my microphone for so many different things.
I've searched this problem, it seems there are numerous people with the same problems, and I just find that sad, I've been using creative products for a long time now, and have never had a problem like this before. -
All,
I am trying to configure simple load balancing to 4 servers on a ACE (ver 3.0.0A13B), but I can't get it to work.
See config below. I have L3 vlan interfaces on my Cat6513 for vlan 22, 29 and 121.
Can anyone spot the issue?
Thanks, Pieter-Jon
probe tcp TCP
description TCP PROBE
interval 2
faildetect 2
passdetect interval 2
connection term forced
open 2
parameter-map type connection IDLE
set timeout inactivity 600
rserver host INFO-Realserver-1
ip address 38.22.175.1
probe TCP
inservice
rserver host INFO-Realserver-2
ip address 38.22.175.2
probe TCP
inservice
rserver host INFO-Realserver-3
ip address 38.22.175.3
probe TCP
inservice
rserver host INFO-Realserver-4
ip address 38.22.175.4
probe TCP
inservice
serverfarm host INFO2008
predictor leastconns slowstart 15
probe TCP
rserver INFO-Realserver-1
inservice
rserver INFO-Realserver-2
inservice
rserver INFO-Realserver-3
inservice
rserver INFO-Realserver-4
inservice
class-map match-all L4_VIP_ADDRESS_CLASS
2 match virtual-address 38.29.250.250 tcp any
class-map type management match-any MGMT-Class
2 match protocol icmp any
3 match protocol ssh any
4 match protocol telnet any
class-map type management match-all SNMP_ALLOW_CLASS
2 match protocol snmp any
class-map type management match-all TELNET_ALLOW_ALL
2 match protocol telnet any
policy-map type management first-match MGMT-Policy
class MGMT-Class
permit
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class TELNET_ALLOW_ALL
permit
policy-map type management first-match SNMP_ALLOW_POLICY
class SNMP_ALLOW_CLASS
permit
policy-map type loadbalance first-match L7_VIP_LB_ORDER_POLICY
class class-default
serverfarm INFO2008
policy-map multi-match L4_LB_VIP_POLICY
class L4_VIP_ADDRESS_CLASS
loadbalance vip inservice
loadbalance policy L7_VIP_LB_ORDER_POLICY
loadbalance vip icmp-reply
loadbalance vip advertise
interface vlan 22
description Info Servers vlan
ip address 38.22.1.250 255.255.0.0
no shutdown
interface vlan 29
description Info Front End vlan
ip address 38.29.1.250 255.255.0.0
service-policy input L4_LB_VIP_POLICY
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
interface vlan 121
ip address 38.121.6.1 255.255.0.0
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input SNMP_ALLOW_POLICY
no shutdown
ip route 0.0.0.0 0.0.0.0 38.121.1.1> I have L3 vlan interfaces on my Cat6513 for vlan 22, 29 and 121.
That is your problem first of all.
If i get it right from your config.
VLAN 121 is your transfer network / or client side vlan
VLAN 22 and VLAN 29 are Server VLANS?
What you should keep in mind is that you define the server side vlans only on the ACE contexts with L3. You don't define them on the supervisor.
If you use the ACE in routed mode you have to assign networks exclusive to the ace like routing networks to a layer 3 device in your network. If you use those vlans (22,29) on other parts of your net you should subnet them or take another network.
Your setup should look like this.
6513
L3 ~ VLAN 121
L2 ~ VLAN 22,29,121
ACE Module
L3 ~ VLAN 22,29,121
You assign the 3 vlans or any other to a vlan group and assign this group to the ace module.
Create a new context -> assign the vlan 22,29 and 121 to this context.
6513(L3) <-- vlan 121 --> ACE (L3) /Admin Context
6513(L3) <-- vlan 121 --> ACE(L3) / Server Context --> VLAN 22,29
ACE Admin Context (VLAN121)
ACE Server Context (VLAN 121,22,29)
After you have a working L2/L3 setup start troubleshooting the ace config itself. :)
Hope it helps
Roble
Maybe you are looking for
-
Problem with Incident_date column in CS_INCIDENTS_ALL_B table
Hi everyone, I am using date range search in CS_INCIDENTS_ALL_B table using the column INCIDENT_DATE. As this is a standard table, a index is already defined there on the column INCIDENT_DATE. If I am using the following query: [26-OCT-2010 is today'
-
How to disable a tab in a spark tab bar?
I have a spark tab bar linked to a ViewStack. In olden days, IIRC, setting the enabled property of a viewstack member would set the corresponding tab inactive. However, if I try that now, the tab control is still active, but the contents of the vi
-
DigitalColor Meter show other colors as created in application.
Hi community. I'm not an expert in color and maybe I make a mistake or don't understand the workflow. I create different colored boxes in TextEdit and other application. Both use the same OS X color tool to define the color. I define the color RGB. R
-
Hope enable option to change iphone lock sound for next update
It is better to enable for changing the lock sound
-
Downloaded 3.6.13 today and now I can not use my right click function when trying to open a new tab!
When browsing the net I can not use my right click function on a link to open a new tab. How can I fix this? It was working fine until I downloaded 3.6.13 Firefox this am.