X-fi speaker setup HELP!

OK i have a quick problem, How in WINDOWS XP do i access this speaker setup page (pictured is windows vista obviously)?http://pws.prserv.net/tpham/pic3.jpg?The reason i ask is i would like to run a true 3. setup with my new Xtrememusic. and am unable to as of right now.Message Edited by nd4spdbh on 0-08-200803:34 PM

~bump~ ?

Similar Messages

Not able to select speaker setup in creative audio cons

Hi, I'm using Creative X-FI Music. Due to a recent re-installation to Vista, after re-installation of drivers and software (with updates from creative support website), I'm still not able to select the speaker setup directly from the audio console. This has prevent me from calibrating my 5. speaker setu
ps.
Please help? Thanks....

what's your os? if you have xp, you should try sp2...that fixed the problems i was having with my card when i upgraded...try telling windows to go to 5. sound through the sound devices in control panel and then go back to surrmixer and see if that works...

Simple speaker setup for ATV?

I understand if I get bumped because this post isn't ATV-related... But I argue that other ATV users might find this thread helpful. So...
I purchased a new HD TV, one that I will use solely with Apple TV. I want better audio than the built-in speakers. Since I'm not going to need AM/FM radio, CD player, etc., I don't need or want a traditional AV receiver.
I want a 2-speaker speaker setup that can accept an optical audio connection (from the Apple TV)... and that's it. I've seen computer-type speakers that accept a 2.5mm audio cable, from the headphone-out of the computer. The audio signal runs to one speaker, which is the "parent" speaker -- it accepts the audio from the computer, the power input to the speaker system, and then an audio cable that runs audio to the other speaker. I want the same setup... except that it sends an optical audio signal.
Does anyone know of a speaker system that will do this? I don't need all of the bells and whistles of a traditional receiver/speaker setup. Many other Apple TV users out there might have the same, simple needs.

I want a 2-speaker speaker setup that can accept an optical audio connection (from the Apple TV)...
This may be much more than you want, but is I believe what currently replaces my Logitec Z680 which I am still using on my old PPC G5. It is a 505 watt RMS optical input amplified speaker system with 5.1 DD/DTS/Pro Logic II decoder built into the control head. Believe the street price is in the $325-$350 range if interested.

Two speaker setup, Audio is strange please he

It appears that my speaker setup has some how gotten corrupted, as my bass only shoots out of one speaker and the audio for both the left and right channel only kicks out of the other speaker. Seeing as my speaker setup up is only a two speaker setup I would like the bass and audio to be coming out of both speakers as it was originally. I've checked and my speaker setup is set to two stereo desktop speakers so I don't know what I should do. Any help is greatly appreciated. Thank you in advance. My cpu is running a Sound Blaster Li've card.
.Sandro.Message Edited by Sandroace on 09-8-200709:3 PM

nycron
That said, the laptop speakers are playing stereo.
Hello. that would suggest that the integrated audio system is working okay and that the problem is in the jack or external device. There is no processing that I know of that would send 2 channels to the speakers but combine them into one channel into the jack.
If you want to replace the jack you would replace this I/O circuit board.
For a workaround there are many inexpensive usb audio jacks available.
If you want to test some more, switch to the Windows native audio driver.
1. Open the Device Manager (type devmgmt.msc in the Windows search box).
2. Expand the "Sound, video & game controllers" and right click on "IDT High Definition Audio Codec".
3. Select to "Update Driver Software".
4. Click on "Browse my computer for driver software".
5. Click "Let me pick from a list of drivers on my computer".
6. Put a check in the box "Show compatible hardware" if not already checked.
7. In the list of devices, click "High Definition Audio" (the native driver).
8. Click "Next".
9. On the Update Driver Warning box, click "Yes" (install the driver).
10. Restart the laptop if prompted. If not prompted, then no need to restart.
[To get back to the IDT driver, do it again but reverse the names in steps 1 and 6.]
If it doesn't work with the native driver then it is pretty surely hardware failure.
nycron
Also, the balance feature in settings is working and allows me to selectively control the volume of the two external speakers.Which suggests it's how sound files is being processed rather than the output jack itself.
If you still feel that it is a software issue could perform a system recovery. Doing so will fix the issue unless it is due to hardware failure.

Site setup help...

Hi -
I am new to using CS5 and I am having a few different problems. I am not sure but I think they all stem from improper setup. I had used dreamweaver mx 2004 to set up a few sites back in 2004-5 so I am am somehwat familiar with setup, however, besides trying out CS5 on a new computer, I also now have a QNAP 459+ NAS which I am using as the remote server (as opposed to a site through go daddy or other).
I have PHP and mysql running on my NAS, and I have also installed Xampp on my computer. (first off I was not sure that I needed this because I have a server (NAS), but I decided to install so because I was pretty sure that my local machine needed apache running in order to parse php scripts before they run on the server) In XAMPP control panel, I get the following:
Where it says apache is started but up above it does not say that it is running. When I try to view PHP code in dreamweaver from the local site, it just shows the little PHP emblem and does not process the code. It does process php if I access the page from the server by typing the address in a browser. It does not process at all in dreamweaver.
I also get the following errors in dreamweaver which I am not sure but I think are related:
"dynamically-related files could not be resolved because your credentials don't allow file activity on the server"
and
"An unknown error occurredwhile discovering dynamically related files. Retry."
I am not sure if I have multiple problems or just one which is causing all these symptoms, but any advice/help would be greatly appreciated!
Thanks,
LilPauly8211

Lost prior settings? How? Why?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Vince Howard" <[email protected]> wrote in
message
news:f1s810$g7u$[email protected]..
>I can not connect and upload to the web site thru
Dreamweaver and need some
> setup help. I can not determine what I am doing wrong. I
have lost all my
> prior
> settings, new computer. Can someone help me with the
local and remote
> settings.
>

5.1 Speaker Setup not stick

I just recently got a set of Logitech X-530 speakers. My sound card is the Soundblaster Li've! 5. card. I have verified that I've got the speakers plugged in correctly. I went to the speaker setup in the Creative software and set it to 5. (without digital output). At this point everything works great. However, after I reboot my computer the speaker setup goes back to 2 speakers. I have verified (using Creative's Auto-Update Acti'veX Control) that I have the latest drivers for my sound card. Is this a SB issue or a Windows issue? What do I need to do so that my computer will remember my speaker setup?Thanks.

kinadian wrote:
I do not see a "Synchronize with Control Panel" option in the Surrond Mixer settings anywhere. Where should I be looking for it's
Also, after I've set the speakers to 5., I can go into Control Panel\Sounds and Audio Devices and the speaker setup is configured properly in there. As far as I can tell everything is ok. Until I reboot. Then it reverts back to 2 speakers.
It's more of an annoyance issue than anything else. Since I can go into the settings and switch it back. I would just rather not have to do that everytime I reboot my machine.
On Speaker Settings, not on Surround Mixer.
jutapa

Setup & Help buttons stopped working

I recently upgraded wireless network from WEP to WPA. Lost wireless connectivity to 3310 All-in-One, and now Setup & Help buttons don't work so I can't connect to new network. What happened? Is there a way to setup new network without accessing Setup menu on device?

Get the latest software for your printer from the "Support & Drivers" link at the top of this page. Run the software, making sure there is no USB cable attached. Choose "Network" or "Wireless" connection type when it asks. Plug in a USB cable (temporarily) when it asks.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Will Creative Ever Support The 6.1 Speaker Setup In Vista?

The subject line says it all. I'm disappointed that I have a 6. speaker setup with my X-Fi card that worked great in Windows XP, even the x64 edition. Now since I've updated to Vista, the rear center speaker is no longer enabled. I know the current driver set has a note on this, but just wondering if we will ever get 6. surround support again.

alexs3d2 wrote:
No, because Microsoft doesn't support it.
I'll elaborate on that a bit for you. The 6.1 surround setup is not supported in Vista. This means that (barring some bizzare workaround/emulation effort by Creative), you won't see 6.1 in Vista no matter what sound card/onboard chip you use. It's not up to Creative. Sorry. Microsoft could re-introduce 6.1 with a Vista update. I don't know if it's feasible to do so, but I wouldn't expect anything till Service Pack , as my guess is that would require some major sound architecture changes.

2.1 speaker setup on the SoundBlaster Live24 Extern

I have a 2. speaker setup but I can not figure out how to configure the Li've24 for 2.

I have a pair of Swans M-200's and a Totem Thunder Subwoofer. I have the Swans plugged into the front L+R output and the Subwooder plugged into the Sub/Center output on the Li've24 external. When I select 2/2. speaker output it only shows me the left and right speakers and the test tone will only produce sound out of the front left and right speakers and not the subwoofer. When I click on the "Bass Managment" tab everything including "Bass Redirect" is greyed out. The only way thus far I have been able to get the subwoofer to work at all is if I select 5. then the test tone will produce sound out of the subwoofer.

When I call I can't hear the ringing sound or the other person talking to me unless I have the headset plugged in or when I have it on speaker. Help please !

When I call I can't hear the ringing sound or the other person talking to me unless I have the headset plugged in or when I have it on speaker. Help please !

Mine does this intermittently. Occasionally after dialing the number, I can’t hear anything. I routinely have re-dial and sometimes this does not work either. Sometimes if I close all applications, including the dialer, then restart the dialer, it will work again. Sometimes I have to close all programs and restart the phone. It’s definitely frustrating.

Cs4 in design page setup help cm, mm, inches change

hi all
i dont know if i am being totally stupid but whaen i go to start up an new document in indesign cs4 i can sem to change my page dimension option to cm, inches or mm it comes up like - 51p0 x 66p0 etc
can someone tell me how to change this so i can make my pages in mm, cm or inches?
thank you for your help
here is a a screen shot

ahhhh
thank you
Date: Sat, 22 Aug 2009 06:37:29 -0600
From: [email protected]
To: [email protected]
Subject: cs4 in design page setup help cm, mm, inches change
With no files open, edit your preferences and change units to inches.
That said, InDesign will convert units so if you type 11 in, even though the document uses picas, it will convert the inches to picas for you.
Bob
>

Need help with sonos speaker setup, connecting to music through an NAS hdd on AirPort Extreme.i

i Cannot figure out how to connect the sonos speaker with the right path. It also wants a password for the disk and I don't recall setting up one. My speaker works fine through my pc or MacBook but I want to play music from a shared folder on an hdd that is connected to my AirPort Extreme. Any ideas or experience with this???

Called Sonos, they got me all setup.

Help with speaker setup please

I have a audigy se and use Ventrilo and play WOW. The situation is I Would like to have ventrilo with my headphones and WOW with my 2 desktop speakers... Is there any way to set this up? Thanks for any advice/help!!?Kixyour

flatpickit wrote:
Is there a way to use Mail with a free email account?
Mail doesn't care, itself. All Mail cares about is whether you have the numbers to plug into the setup. The free or paid thing all depends on the mail provider. Yahoo doesn't care what PC or Mac program you are using to access it. They simply block the POP access by default, and release it when they have your money.
If you use Mail with a mail provider that has free mail client access, all you have to do is plug in the server info and you'll have direct access. GMail is one of these.

Audigy 2 ZS Platinum Pro - GigaWorks 7.1 - Tracktor DJ Studio - Setup help ple

I am trying to work out the best way to configure the following components so I can mix 2 tunes - listen to the mix on one channel and the incoming song on the headphones.
SoundBlaster Audigy 2 ZS Platinum Pro
GigaWorks 7.
Tracktor DJ Studio
Currently with the Gigaworks connected to the Audigy and the headphones connected into the External IO Hub - selecting any combination of channels in Traktor to become master or headphone yields all tunes being played through speakers and headphones.
Reading the spec on the Audigy it appears I can use Line out on the soundcard itself to connect the headphones direct - but with the Gigaworks requiring all 3 line outs - how should i then best connect the speakers?
The Traktor instructions indicate that this config is possible using a multichannel soundcard - which this is.
I've attempted config in Traktor using all of the following Audio Devices:-
SB Audigy 2 ZS ASIO [ECCO]
SB Audigy 2 ZS ASIO 24/96 [ECCO]
Creative ASIO
DS SB Audigy 2 ZS Audio [ ECCO]
No luck with any of them.
Im obviously not understanding something - and im sure im not the first person to attempt this.
Any help appreciated.
Regards
Simon

I think what you're missing is that the headphone out is really connected to the same signal as the front speakers out. The assumption is that you're either going to be listening to the headphones or to the speakers. Tracktor can probably use the soundcard channels independently, but anything directed to the headphones also goes to the front speaker output. I believe you can set things up so plugging in the headphones will mute the speakers, but that doesn't help the front speakers play a different signal than the headphones.
I don't think there's a connection setup which you can use both for Tractor and for 7. listening. You can probably get Tractor to send the output you want to hear on your headphones to line out 2 and the mixed signal to line out . That would mean connecting the headphones to what is normally the surround left/right output, which you'd need to disconnect from the speakers while you're doing this.
If you end up trying to rig up switching to help you go back and forth, using 4 Sony-type camcorder cables for line out 2 and 3, and 2 stereo minijack to RCA cables will probabably be helpful because it will be a lot easier to get RCA-connector switching than 4-pole minijack switching.
-Dave
[email protected]

Catalyst 3750 24FS-S Initial Setup help please

First time with Cisco and with Fibre, so a double whammy!
I would appreciate some help from the community from someone with experience setting up a 3750 24FS Switch
I have WS-C3750-24FS-S fibre switch that I have inherited In good working order but factory reset) which I need to configure just as a very simple Layer 2 switch where the Gbit SLIC is the uplink (trunk) and the 24 ports connect to 24 different users (Soho Router). All users and the uplink Gateway are on the same subnet, so I don't think I need Layer 3 switching, but not avers to using it if necessary to get things working.
Firmware is v12.2(25)SEE2 and I have the switch Console connected to a PC serial port. I have gone through the initial setup process following the guide and I appear to have the initial setup done correctly but non of the ports are "UP" and I can't for the life of me see how to switch the ports on?
MySwitch>show interfaces fastethernet1/0/1
returns
FastEthernet1/0/1 is down, line protocol is down (notconnect)
I can change duplex from half to full and I can set flow control up on receive, so the switch is functional programmatically speaking. But what are the magic incantations to change the "down" state to the "up" state???
If I am posting in the wrong forum please tell me where I should post this request for help?
Thanks

Thank you Tom - on the money with that answer. There is no magic "up" command (other than no shut). The ports just come "up" when correctly connected. I had just about figured it out by connecting two of the 3750 Switches to each other and bingo the connected ports came up by themselves. I had previously connected the ports to an external Media Converter so I could get a wired Ethernet connection. I think the Media Converter is not doing it's job or is incompatible. All the right LEDs came on apart from FX Active!
Thanks for the help Tom, much appreciated.

X-fi speaker setup HELP!

Similar Messages

Maybe you are looking for