X-Fi Titanium Fatal1ty Champ series I/O drive

-X-Fi Titanium Fatalty Champ series I/O dri've? Hi guys, new guy here. Hoping someone can help me out because I'm on the verge of throwing myself off the tallest building around here any moment...
I tried emailing for support before but did not receive any response at all.
I recently purchased the X-Fi Titanium Fatalty Champion Series with front panel included for my new computer that I bought. I installed the card and the front I/O panel that came with it, plugged it all in according to the directions and installed the drivers off the cd. However, when plugging my headset to the front X-fi I/O panel, I don't get any sound whatsoever.
Everything is seated as tight as it can and nothing disconnected inside the case. The front panel is lit up as well which means it should be running, and when I turn the volume knob on it, I see its adjusting the volume on the computer itself, so it should be working...but again... I don't hear any sound when plugging my headset (3.5mm Fatalty Gaming Headset) into the headset jacks.
Please help.
My stats are the following:
Motherboard:? Asrock X58 Supercomputer
Ram:? 6GB OCZ OCZ3P333LV3GK 333MHz DDR3-333/PC3-0600
Video:? Sapphire Vapor-X Radeon 4870 (2GB)
OS:? Vista Ultimate x64 SP
Case: Thermaltake Armor+ VH6000BWS
I even tried disabling the Realtek onboard sound and uninstalling its driver, and the front still wont work when I plug my headset in.
So if you can, please help me. I want to get this thing working. Thank you.
Kind Regards,
John
[EDIT] OOPS! Forgot to say that I bought the PCIE version. I think mine only came with two black wires/cords to plug from the card the to X-fi I/O panel.
Message Edited by Yokhanan on 06-24-2009 02:07 [email protected]

Wow and I thought the tech support directly was slow... angry:73.3.99.30

Similar Messages

SB Titanium Fatal1ty Champ - Frontpanel does not work correctly

?SB Titanium Fatalty Champ - Frontpanel does not work correctly? good morning,
i use the fatalty with the - champ - frontpanel. Unfortunately this panel does not work correctly. that means is have sound at the headphones and can use the mic but i cannot change the volume (HP and Mic)and cannot change?game mode, cmss-3d and crystalizer.
i?tested this card on two operating systems (one of the totally new) but the frontpanel does not work.
I try the driver from CD, the newest which will be found by creatives autoupdate driver search and i check youp pak but none of them will help.
Internal Soundcard of my mainboard is deactivated.
The hardware is not damaged - i try two different titanium cards with two frontpanels...
here my system:
[color="#0000ff" face="Book Antiqua">MSI DKA790GX Platinum , Cooler Master CM 690
AMD Phenom X4 9950BE @ 3,2GHZ, Logitech Z-4e
4GB Kingston HyperX DIMM 2 GB DDR2-800 Kit
MSI N260GTX-T2D896-OC @707MHZ
Xilence RedWing Gaming Edition Modular - 750 Watt
Creative X-Fi Titanium Fatalty Champion Series
Windows Vista Ultimate 32-Bit; Samsung T260
so...what can i do now? i have no idea what to test now?
brgds
stefan

So nobody actually has any idea what the problem is? I'm not the thread-bumping type, but this is a very annoying issue and if anyone has any useful information I would greatly apprecaite it.

Connect SPDIF X-Fi Titanium Fatal1ty Pro Series ?

Hello,
I have a problem with a cable connection to SPDIF X-Fi Titanium Fatalty Pro Series.
I can not find where the entrance of the cable in the back and threw the manuals that I received while shopping.
If someone could give me a picture of a location to link SPDIF cable
Sound card. I have a cable SPDIF 2 accesses the video card.
I'll thank you for your help.

some how that thing its not working out for me.
if you havent know what i am looking after :
the spdif pins of the audio card http:// forums.creative.com/t5/Sound-Blaster/Connect-SPDIF-X-Fi-Titanium-Fatalty-Pro-Series/m-p/567247#M5878 X-Fi Titanium Fatalty Pro Series.

Using back SPDIF Motherboards outputs with X-Fi Titanium Fatal1ty Pro Series

I have an Asus Rampage Formula that comes with Digital Coaxial and Toslink outputs and a PCI-E sound card, Supreme FX II.
I was able to use both back SPDIF outputs with out any cable, you the card in the PCI-E slot, but I have change my card with a X-Fi Titanium Fatalty Pro Series, no im not able to use any of those outlets, im used the the Coax to my Home theater and the Toslink to me headphones.
Now I can only use the Toslink of the digital output of the X-Fi with my headphones but im not able to use the ports of the mobo to my home theater, is there a way I can use them? the card doesnt have a Coaxial output and thats the problem.
Also, my mobo has 4 pin SPDIF output port, so you can connect something there, but it seems that there are any cable from the output port of the mobo to the audio card....
I found this but Im thinking it might not work...
http://cgi.ebay.com/ASUS-COMPUTER-MB-ACCESSORY-SPDIF-OUT-COA-OPT-4pin-SPDIF_W0QQitemZ3504993780QQcmdZViewItemQQptZLH_Def aultDomain_0?hash=item3504993780&_trksid=p3286.c0. m4&_trkparms=72%3A234%7C66%3A2%7C65%3A2%7C39%3A%7C 240%3A38%7C30%3A%7C293%3A%7C294%3A50?
Any help will be really appreciated!
Thank You!?

Any [email protected]

No MediaSource Go! with X-Fi Titanium Fatal1ty Pro Series?

I recently picked up a new X-Fi Titanium Fatalty Pro Series card; which replaced my older X-Fi Platinum, that sadly stopped working.
Anyway I noticed that, this newer Titanium card came with a newer version of the Creative MediaSource software; called MediaSource 5.
However, it does not include the launching application, MediaSource Go! which is the launcher bar that loads on startup. With my X-Fi Plat, when I hover my mouse over the top edge of my screen the MediaSource Go! launcher bar drops into view and I can just click on the icon of any Creative application that I have on that bar, to launch that application.
I liked that very much.
So I am curious, why is this not included with the newer MediaSource that comes with the X-Fi Titanium Fatalty Pro? I would very much love to have it!

@. Re: No MediaSource Go! with X-Fi Titanium Fatalty Pro Series? I have a similar issue. I am having a problem with speaker calibration which strated several months ago after updating some Creative files. Today I uninstalled all Creative apps and driver pack and reinstalled the latest versions. Doing this I lost my Mediasource Go! bar. So I downloaded it and when I tried to install it I got a message saying? I did not have the "minimum" version of MediaSource and that it would now quit. However, when I had Go! before I also had Mediasource5; in fact the Start Menu shortcut for Go! (which is now a broken link since Go was removed) showed it was in the Mediasource5 directory. So why won't Mediasource Go! install with Mediasource5 installed? I thought the "minimum" version of Mediasource required for Go! was 3.00.6.

X-Fi Titanium Fatal1ty Champion Series stopped working

6X-Fi Titanium Fatalty Champion Series stopped working Hey guys!
After a totaly normal reboot, my X-Fi Titanium Fatalty Pro/Champion suddenly stopped working....
No sound and the led ont the side of the card also is black(same for the front panel) while the optical out still seems to be working.
Its still displayed as Creative sb xfi in the device manager but the main output device is shown as Internal AUX-socket in the sound options dialog (while the spdif-out seems to be ok)
<a rel="nofollow" target="_blank" href="http://i49.tinypic.com/332slj.png"]http://i49.tinypic.com/332slj.png[/url]
<a rel="nofollow" target="_blank" href="http://de.tinypic.com">[img"]http://i49.tinypic.com/332slj.png" width="639[/img] alt="Image and video hosting by TinyPic" height="399">[/url]
Reinstalled everything about 5 times.....doesnt work

Still no solution... but the spdif out/in realy seems to work....

HDMI connection through PCI Express X-Fi Titanium Fatal1ty Pro Series and Nvidia GTX 2951

Hello,
I want to connect HDMI connection through PCI Express X-Fi Titanium Fatalty Pro Series and Nvidia GTX 295\but i cant tell which of the pins on the Audio Card is the Spdif.

CRe: Mic not working (PCI Express X-Fi Titanium Fatalty Pro Series)? Hello,
Thanks for the reply.
The headset is connected via the 3.5mm jacks in the card.
I believe I have it working now. I ended up having to unstall the drivers and software, reboot, install drivers and software and then mess with the settings. The only issues that I am having now is that I hear a a really high sort of feedback/hiss tone from the headphones now. To correct this I have to turn the input for the microphone down really low within the Windows 7 controls for the microphone and turn it up with Ventrilo to get the mic to work and remove the feedback/hiss.
I believe that the issue stems from the flexjack setting. The whole flexjack thing really seems to mess with the microphone settings. I believe I choose line-in instead of microphone.
Once I get home tonight from work, I will hopefully post the exact settings I came up with to get the mic to work.

Sound Blaster X-Fi Titanium Fatal1ty Champion Series and Win 7 64Bit

Now that Win 7 SP is out, i am planning on moving over to the Win 7 64Bit OS.
Whats the best way to setup Sound Blaster X-Fi Titanium Fatalty Champion Series card software setup.
Is there a DVD i could download or be sent for Win 7.
Whats the best way to proceed...
Thanks
red

OK I got it!!
I put in a Price Alert at the egg and got it for 09.00/with FREE shipping so I'm stoked!! it DOES have a yellow sticker on the box that says "works with Windows 7" so I guess this is all I need.
Are there ANY suggestions on how to go about installing this in Windows 7 64bit, I want the front panel to work and will use it for movies music and mostly gaming.
what about Windows 7 installing the card as a standard sound device at boot, is there a way to prevent this if not how is this fixed?
Should I use the newest beta drivers? or wait till I see if I have any problems with the sound not working?
what about the user made drivers I have seen around these forums, I know they are most likely not supported but how about functionality? would they be better?
thanks for any suggestions.

X-Fi Titanium Fatal1ty Professional Series sound c

Will You be able to use the older X-Fi I/O?Panel with the new PCIe ?Message Edited by zoogie45 on 05-29-2008 02:3 PM

I wanna use this
<img alt="X-Fi I/O Dri've upgrade Kit" src="http://images.americas.creative.com/images/products/large/4659.png" width="290" height="290">
With this
<img alt="PCI Express Sound Blaster X-Fi Titanium Fatalty Professional Series" src="http://images.americas.creative.com/images/products/large/779.png" width="290" height="290">

Headphones for Titanium Fatal1ty Professional Series

Hello everyone,
Basically I'm planing to buy Fat. Prof. Series card, but before I do that I need to pick a headphones(5.1/7.1) for this sound card, any suggestions what is a good choice? Or what I should look at when picking. Ah, and I mainly need them for gaming.Thank you in advance.

Yes, that's right. And I want to switch simply between speakers and headphones. Only one with sound, the other mute. At the moment, when I plug in my headphones, the speakers becomes mute. That's ok, but . I always want to let my headphones connected and 2.1 when I switch sound to the speakers, the sound also comes out of the headphones. It's not possbile to mute the headphones only. There must be a way.

X-Fi Titanium Fatal1ty Professional Series = No hardware acceleration in games when using SPDIF o

So I play Lord of the Rings Online which is a nati've OpenAL+EAX game. I used to run my headphones directly out of the analog output on the X-Fi card and I was able to select hardware accelerated audio in game and hear sound.
Recently I decided to start using the SPDIF output into a dedicated DAC. Now hardware accelerated audio no longer works. I have to use software mode.
Does the X-Fi not support hardware acceleration in games when using the SPDIF output?

Zorlac wrote:
I am happy to report that I think it is working the way I want. I have the latest driver and pulled up the "Audio Control Panel". There is a tab called "SPDIF I/O". I had to check the box next to "Play Stereo Mix using Digital Output" in the "Digital Output" section. Now I can select the normal X-Fi option in the Lord of the Rings Online audio config section instead of having to select generic software audio.
So is the X-Fi now using its own DAC and ADC before it outputs via optical out?
...so yeah, my OCD is not over yet (more questions):
. How the heck do you prove that hardware accelerated OpenAL, EAX features, EAX effects, etc., are enabled and working? Creative Labs could market just about any new feature in EAX and the listener would have no way to prove its working it seems... Is there software to analyze which EAX features are supported, which are being used, etc.
2. Do you really have to be in Game Mode in order to take advantage of hardware acceleration and EAX feature/effects in games? It seems to me that Audio Creation Mode can support these "optionally" from what I have read online. What does optionally mean if this is true? heh
3. How do I prove that I am getting bit perfect output in Audio Creation Mode? I need some way to monitor the SPDIF optical output via hardware or software. Someone here has to know the answer to this without hooking my card into a multi-thousand dollar home theater amp to find out. Can I hook the SPDIF optical output to the optical input and some how analyze the input signal? (im just brainstorming)
With spdif out, you are not using the DACs on the card.
As for questions through 3, very good questions.
. With 4.0, 4., 5.0, or 5. speaker set up, and CMSS turned off, I think if you can hear sound out of the rear speakers when the sound is supposed to be behind you, then you can safely say EAX is working.
2. Don't know. I leave mine in game mode all the time. I have 64bit Vista, and there are no 64bit ASIO drivers, so I have no need to go into audio creation mode. Everything I do works good in game mode, and I use a different card for recording.
3. Don't know.

PCIe SB X-Fi Titanium Fatal1ty Pro Series - Crackling (when quad-SLI enabl

Hey Everyone
I just bought this card to upgrade from onboard but I'm having issues with crackling. It happens mostly when mousing over anything that reacts to the mouse pointer or graphically in any way. For example scrolling down a website causes major crackling and popping and it only happens when quad-SLI is enabled.
I have 2x 9800 GX2 running in SLI on an EVGA 790i Ultra SLI motherboard Vista 64 with 4GB DDR3 RAM both graphic cards and the sound card are running on IRQ 6
It's extremely annoying and it doesn't happen when the computer is just sitting there but as soon as stuff starts happening like videogames/videos/websites etc crackling can be heard.
I've updated to 2.7.5 and the problem is still there, motherboard BIOS, NForce drivers and video drivers are all up to date as well.
Is there any solution to this?

Yeah, I have this same problem also... I have 2 9800GX2 quad sli and when it's enabled i get crackling popping and then sometimes the sound cuts out!! Only with quad sli enabled..... I also have the 790i ultra and 4gb of ddr3@700mhz..... I believe that this is related to the graphics cards and the sound card sharing IRQ 6 which also happens to me. It gives all cards on the pci-express lanes the same IRQ 6!!! The reason it doesn't happen with onboard sound is because it gives the onboard irq 22. If someone could find a way within the bios to be able to change this or if this can be changed in a future driver update it would be great!! In the 790i bios it assigns the graphics cards and soun IRQ while onboard is IRQ 0! You can't assign an irq in the bios either! Only options are PCI or reserved!!!

Sound lag with X-Fi Titanium Fatal1ty Pro Seri

Hello to you all,
I just built a new computer and the problem I have is that sound lags with WMCE in Vista. My video card is ATI 4850 (52mb) and motherboard is 790gx. The internal sound and integrated video are both disabbled. Any suggestions as to fix the sound lag while watching TV on Media Center? I have no problems with music or games with this. Thanks to all.

Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
"Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
I have created a support ticket hoping that this and the other post above might bring about a driver update.
Will keep testing and post any updates.

T7900 with Creative X-Fi Titanium Fatal1ty Professional Series(PCI-E)

Can I connect my T7900 with above mentioned soundcard. I mean my speakersystem only have a green, red, and black connector cable. Soundcard have 4 Connectors to connect speakers green, red, black and grey. Grey is for side speakers. Is this a problem to connect speakers with soundcard to use 7.1
thx for help

Hi CpTMaverick,
Do you have the Inspire T7900?
There are 4 connectors on the subwoofer, green, black, orange and grey. You will need a 4:4 cable to connect your speakers to your soundcard. Get in touch with the online store to check for availability.

X-Fi Titanium Fatal1ty Champion Series Help Before Buyin

Hello Creative Users
i wanted to hear if you guys have? this soundcard bcos i need some help bcos i sing and i need to know if it has?Stereo Mix or What U Hear in Vista. and i gotta use the AUX IN that it got. so my Mixer can work. bcos the Music and Vocal gotta play in the Stereo Mix??so i hope you guys can help me out here..
regared
Aerux

Hi,
Sorry if you have already done this, please make sure you have removed all previous sound card related drivers and software before you reinstall. Put the system in a clean boot state before reinstalling to make sure that you have no background applications running during the installation.

X-Fi Titanium Fatal1ty Champ series I/O drive

Similar Messages

Maybe you are looking for