[ X-Fi Titanium Fatal1ty Champion] Output front and back, just one source

Hey!
I searched in every thread, but I couldn't find an answer.
I've a headset on front panel and speakers on the back. When I play a sound, I want to hear it on speakers and headset. I found out, that it is impossible if there are two sources, but one source is possible, right?
Where can I configure that?

Hmm, always the same: I'm desperate, registrate in forums and write a post. Short time after that, I found the solution.
SB Audio Config -> Headset - options (just have it in german language) and uncheck "Mute speakers automatically" (or similar).

Similar Messages

How do I print front and back with two pages per sheet? (OSX Lion)

I can't find a simple solution to my situation...
I'm using Max OSX Lion 10.7.3 and Adobe Reader X 10.1.2.
I want print two PDF pages onto one printed sheet, and I want to print front and back. When I go to the print settings and select two pages per printed sheet, the sample window shows me what I'm looking for. But when I tell it to print odd only or even only, it changes the print selection. Here's what happens...
Let's say I have a PDF document that is 20 pages long. When I tell it to print two PDF pages per sheet, it shows me that the first pages printed will be PDF pages 1 and 2. When I tell it that I want it to print odd pages only, it tells me that the first printed page will contain PDF pages 1 and 3.
In other words, Adobe Reader wants to print the odd PDF pages instead of the odd pages of the printed document (PDF pages 1 and 2, then 5 and 6, then 9 and 10, so on).
So that I'm being clear...
This [ ] is a printed page. The numbers inside the brackets represent the page numbers in the PDF document...
What I want to print is this...
FRONT   || BACK
[1,2]    || [3,4]
[5,6]    || [7,8]
[9,10]   || [11,12]
[13,14] || [15,16]
[17,18] || [19,20]
What would end up printing is this...
FRONT   || BACK
[1,3]    || [2,4]
[5,7]    || [6,8]
[9,11]   || [10,12]
[13,15] || [14,16]
[17,19] || [18,20]
Aside from telling it exactly which PDF page numbers to print (this would be a taxing job because I'm working with a 273 page document), is there an easy and simple way to print how I'd like?

I would suggest to use Adobe Ilustrator. Also I get an error message when I try tp access the sample document.
You can download Illustrator using Adobe Creative download - http://www.adobe.com/products/illustrator.html
~Deepak

How to print page in front and back in scripts

hi,
I want to know to know the how to print a page in front and back.

HI Ragavendra
set this
Print mode is D
With Print mode, you can specify single- or double-sided printing for a page. You can choose from the following values:
D The page is printed on the first side of a sheet in duplex mode. If another mode was previously active, then the printer is switched to duplex mode with the start of the pageand continues in this mode.
and other Print mode options are
Print mode
With Print mode, you can specify single- or double-sided printing for a page. You can choose from the following values:
' ' Currently active printing mode continues unchanged.
S The page is printed in simplex mode. That is, the printer should print on only one side of the paper. If another mode was previously active, then the printer is switched to simplex mode with the start of the page.
D The page is printed on the first side of a sheet in duplex mode. If another mode was previously active, then the printer is switched to duplex mode with the start of the pageand continues in this mode.
T The page is printed on the first side of a sheet in tumble duplex mode. That is, the printer prints on both sides. The page on the second side is always inverted, so that the footer of the second page is printed opposite the header of the first page.
If another mode was previously active, then the printer is switched to tumble duplex mode with the start of the page and continues printing in this mode.
Print modes are currently supported for printers that use the PCL-5 language. These are printers that are defined with the following SAP device types: HPLJ_II, HPLJIIID, HPLJ4, LX4039, SNI20XX8.
See the spool system (transaction SPAD) to check on how your printers are defined.
The print controls for these functions are SPMSI (begin simplex printing); SPMDU (begin duplex printing); SPMTU (begin tumble duplex printing); SPMFS (print on first side of sheet in duplex or tumble duplex mode); and SPMBS (print on second side of sheet in duplex or tumble duplex mode).
Regards Rk

I have an iphone 4 . A new screen has been fitted front and back. It suffered a bit of a bang. Now when the phone is turned on the apple logo appears but nothing more . Could there be a problem elsewhere ? Other than smashed screen? Any ideas welcome

I have an iphone 4 . It's had a new front and back screen fitted after a bit of a bang . Now when turned on the apple logo appears on the screen and then goes off. Then appears again etc etc etc .
It won't go any further . Any ideas as to what else may be an issue or has anyone else had the same problem and what was the outcome . If I back up to iTunes will I be able to back up my information without any activity showing on the screen !! I'm lost without all my information . I haven't backed up to iCloud for at least 5 months. Can anyone help me PLEASE?????

Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

Front and back inside covers?

I just submitted my first book to be printed. I am concerned that the pages will not come out correctly, in as far as odd-even. In the iphoto book, the system automatically puts an inside cover at the beginning and at the end allowing those pages to print double sided for the front and back cover. However, when the pdf file is generated and viewed, no blank pages are created for this purpose. When the book gets printed, does the Apple printer allow for this? Will my odd pages start as odd or come out even as they did in the pdf file?

RG:
As I recall (all of my books were given away as gifts so I don't have them handy for reference) the odd pages did come out on the right with the even on the left as they should be.

HP Laserjet 4P has a 1" toner stain that runs down the left side of page.(front and back)

Hello all,
This is my first post here and I hope someone can help me.
We have a HP Laserjet 4P that we have used for a few years and recently have had a problem of a 1" toner stain that runs down the left side of the printed page(both front and back side). I have replaced the cartride and cleaned everything I know to clean. When I remove the cartridge, there is a little pile of toner on the left side just in front of the horizontal silver bar that is behind the roller. I have cleaned it up several times. Each time I try to print, The toner stain appears on the printed page again and leaves a new pile of toner in the same place.
Does anyone have any experience with this problem? I am not sure if it is a worn part or a maintenance issue.
Thanks in advance for any help.
Fish

Hi ProspeorusCE,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

I am Using Iphone 3GS, Is it possible to change the complete front and back panels?

I am Using I Phone 3GS model I got lot of scraches over the body of the phone. Is it possible to replace teh complete panel with new one??

If you Google "iPhone 3gs parts" you will be able to find vendors that sell front and back panels. So, I would say it is possible to replace the front and back panels. I wouldn't recommend doing it yourself unless you are experienced in this type of work.

What do i do if my iphone 4 front and back camera doesn't work

what do i do if my iphone 4 front and back camera doesn't work

gordonw26 wrote:
Do you have a crack in the screen
What does this have to do with the camera not working?

Video storing on iPhone 5, front and back camera

Ok I am going to be taking a fairly lengthy video in a few days. I have the iPhone 5 16 GB. I am needing to know how much space I need on my phone to store the video. The video is going to be around 45 minutes long. Anyone who can shed any light on this would be greatly appretiated. I would like to know how much memory I would need for both front and back camera.
Thanks

I have also found out that the front camera contains more noise than the back camera when taking photos. Is that normal?

Can you create 3D object using Repousse w/ front and back Inflation w/o seam?

Greetings. I have created a 3d object using repousse in Photoshop (CS5 extended). The original 2d image is circular. I used the Magic Wand Tool to select the 2d image, then 3D/Repousse/Current Selection to create, selecting the inflate (rounded) Repousse Shape Preset with the Depth of 0. It creates the object as expected, except the front-and-back seam has minor irregularities leaving the object with an uneven seam (see image below). The original 2d image was created in Illustrator using the eliptical tool, so it is as regular as possible. I want it to be seamless. The image below shows the rotated object and the very distinct seam.
Any ideas on how to get rid of, or avoid, that seam? Thanks much.

What you could try is downloading the report to the client pc using WEBUTIL_FILETRANSFER.URL_TO_CLIENT, then open the locally save file using something like:
CLIENT_HOST('cmd /c rundll32.exe url.dll,FileProtocolHandler "localfilename"');

How do I see the front and back arrows on the left hand side of my macbook pro?

How do I see the front and back arrows on the top left hand side of my macbook pro?

Click "View' menu in the application menu bar select Show Toolbar
or
click "Customize Toolbar" and drag the arrows or "default set to the Toolbar".
Best.

My front and back camera won't work, and my flash will not either.

I took some picture in the rain, my iPod 5th gen wasn't affected, then my iPod was dropped in a parking lot and found later. Other than that, nothing has really happened to it, but both the front and back camera do not work. When I open up a camera, it's just black. The flash doesn't work either. Can anyone help me?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Unless you purchased the optional AppleCare+ extended warranty,
Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price

Creating a web based book publication with front and back covers

I have created a book in Indesign which is 12 pages inclusive of front and back covers, the problem I'm having is that when I convert the file into an SWF file the front cover has an extra page to the left of it and the back cover has an extra page to the right of it (these pages are not in my Indesign layots) I don't want these pages as I want the document to look like a book when I send it out. I'm assuming I haven't set the document up correctly? I have been on a number of tutorials but none of them seem to go into this. Some pointers would be really helpful.
Thank you.

You can do this in Elements. It will require planning for the layout, viz. height, and width of front & back covers, and space allocation in between for the spine area. Be sure that your printer can handle the document size.Once you have figured this out, you need to open a new, blank file of appropriate size and resolution.
There is available a grid which I find very helpful to facilitate alignment.
Each of your pictures, and the blank file (#1 above), should have a resolution of 240--300px/in for good result with printing.
The text can be produced with the type tool - optionally horizontal or vertical.
The pictures and text will each be on their own layers, and the move tool can be used to position these components

My front screen of my iphone 4 is cracked and if I bring it in to be fixed can I replace the front and back glass with a different color?

I recently dropped my iphone 4 and cracked the front screen if I brought it in to be fixed can I get both the front and back glass replaced with a different color?

No. They will not. The replacement will be identical to the old one. You always have the option of buying a brand new phone for the full retail price.

PDF files, front and back.

In Adobe Illustrator CS2, is there a way to create a PDF file that is set up to print on the front and back of a page? I have my document currently set-up as an Illustrator file with multiple-page tiles.

Your printer must be capable of printing on both sides, and every printer can have a different location where you change that setting.
For example here is where you find them for the printer I am on, incase this helps. Click and hold mousedown on copies and pages, choose fiery features.
Change 2-sided Printing to any setting but Off.

[ X-Fi Titanium Fatal1ty Champion] Output front and back, just one source

Similar Messages

Maybe you are looking for