X-Fi Titanium Freezes System Windows 8.1 Enterprise X64

I didn't have any problem on Windows 7 Ultimate x64 operating system. When i started to use Windows 8.1 Enterprise X64 edition , likely once in ~1 hour operating system freezes and very loud annoying sounds came from speakers(which is connected to the soundcard) and i have to hard reset computer. This happens while playing games and watching videos. If i disable the soundcard from hardware devices and if i use onboard sound, problem solves.
My operating system, hardware drivers and bios all up-to-date.
I tried everything, (Completely removed all driver and softwares, installed the newest ones.)
Is it only me ?
I think, something is terribly wrong with Creative's Windows 8.1 drivers . Or my soundcard dying ?
Thanks.

Hi,
Please check if the Windows Server 2012 is still UNABLE to detect the external NTFS drive after attach the drive from the Windows 8.1 back to the Windows Server 2012.
A RAW filesystem simply means that it is a filesystem that is not recognized by Windows. The most common cause of external hard drives suddenly becoming RAW drives is if they are disconnected from a computer without using the “Safely Remove Hardware” option.
You can use the Dskprobe tool (Dskprobe.exe) to make repairs to check it the issue still exist on the Windows Server 2012.
What is this Raw File System
http://blogs.technet.com/b/ganand/archive/2008/02/22/what-is-this-raw-file-system.aspx
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

CHKDSK v6.2.9200.16384 dichotomy between Windows 12 Server x64 Standard Build 9200 and Windows 8.1 Enterprise x64

I seem to have discovered a dichotomy between the ability of CHKDSK v6.2.9200.16384 to detect and repair an external NTFS drive, when executed on Windows 2012 Server Standard Build 9200 x64 and Windows 8.1 Enterprise x64. There should be no difference in executing
the same application between these two systems.
Even though both are 64-bit systems, and both are up to date, and both are running the same version of chkdsk, chkdsk on Windows 12 Server was UNABLE to detect an NTFS filesystem on an external WD 1TB USB drive (detected fs as RAW), while chkdsk on Windows
8.1 Enterprise WAS ABLE to detect the NTFS filesystem on the same external drive, and was able to repair it.
So, what is the difference between these two systems? Why should the same version of
any application yield different results between these systems?
The only result on Windows 2012 Server was:
C:\Windows\system32>chkdsk /x /f M:
The type of the file system is RAW.
CHKDSK is not available for RAW drives.
The result on Windows 8.1 Enterprise was:
Log Name:      Application
Source:        Chkdsk
Date:          11/26/2014 8:10:05 AM
Event ID:      26214
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      James-HP
Description:
Chkdsk was executed in read/write mode.
Checking file system on N:
Volume label is WD 1TB.
Stage 1: Examining basic file system structure ...
57978 file records processed.
File verification completed.
2 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
Index entry tsbyebye of index $I30 in file 0x29 points to unused file 0x3f.
Deleting index entry tsbyebye in index $I30 of file 41.
58026 index entries processed.
Index verification completed.
Stage 3: Examining security descriptors ...
Cleaning up 9 unused index entries from index $SII of file 0x9.
Cleaning up 9 unused index entries from index $SDH of file 0x9.
Cleaning up 9 unused security descriptors.
Security descriptor verification completed.
25 data files processed.
CHKDSK is verifying Usn Journal...
The remaining of an USN page at offset 0x1de7cb0 in file 0x3aa
should be filled with zeros.
Usn Journal verification completed.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.
No further action is required.
976759807 KB total disk space.
    234756 KB in 42 files.
       176 KB in 26 indexes.
    153755 KB in use by the system.
     65536 KB occupied by the log file.
976371120 KB available on disk.
      4096 bytes in each allocation unit.
244189951 total allocation units on disk.
244092780 allocation units available on disk.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Chkdsk" />
    <EventID Qualifiers="0">26214</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-11-26T13:10:05.000000000Z" />
    <EventRecordID>11361</EventRecordID>
    <Channel>Application</Channel>
    <Computer>James-HP</Computer>
    <Security />
</System>
<EventData>
    <Data>
Checking file system on N:
Volume label is WD 1TB.
Stage 1: Examining basic file system structure ...
57978 file records processed.
File verification completed.
2 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
Index entry tsbyebye of index $I30 in file 0x29 points to unused file 0x3f.
Deleting index entry tsbyebye in index $I30 of file 41.
58026 index entries processed.
Index verification completed.
Stage 3: Examining security descriptors ...
Cleaning up 9 unused index entries from index $SII of file 0x9.
Cleaning up 9 unused index entries from index $SDH of file 0x9.
Cleaning up 9 unused security descriptors.
Security descriptor verification completed.
25 data files processed.
CHKDSK is verifying Usn Journal...
The remaining of an USN page at offset 0x1de7cb0 in file 0x3aa
should be filled with zeros.
Usn Journal verification completed.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.
No further action is required.
976759807 KB total disk space.
    234756 KB in 42 files.
       176 KB in 26 indexes.
    153755 KB in use by the system.
     65536 KB occupied by the log file.
976371120 KB available on disk.
      4096 bytes in each allocation unit.
244189951 total allocation units on disk.
244092780 allocation units available on disk.
</Data>
    <Binary>7AE2000050000000550000000000000004000000000000000000000000000000</Binary>
</EventData>
</Event>

Hi,
Please check if the Windows Server 2012 is still UNABLE to detect the external NTFS drive after attach the drive from the Windows 8.1 back to the Windows Server 2012.
A RAW filesystem simply means that it is a filesystem that is not recognized by Windows. The most common cause of external hard drives suddenly becoming RAW drives is if they are disconnected from a computer without using the “Safely Remove Hardware” option.
You can use the Dskprobe tool (Dskprobe.exe) to make repairs to check it the issue still exist on the Windows Server 2012.
What is this Raw File System
http://blogs.technet.com/b/ganand/archive/2008/02/22/what-is-this-raw-file-system.aspx
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Operating system Windows 7 Home Premium x64 download

Hello, I have changed broken harddisk in my HP ProBook 4540s and I'm looking for Windows 7 Home Premium x64 (Czech). I have HP DVDs with this OS, but it doesn't boot. So I called to HP and then they sent me another DVD, but it doesn't work too. Where can I download this OS to install my system? Thank you for reply :-)

Hi there
This is the legitimate Windows 7 ISO download page I found:
http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325/page-2#post-124821
You may need language packs to be installed for Czech to be activated after OS installation. Do a google search of Base language for Czech and download that.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Windows 2003 R2 enterprise advances system property configuration values.

Hello Experts,
Please suggest the optimal configs for Windows system (Windows 2003 R2 enterprise) properties on the advanced tab:
Virtual Memory
Data Execution Protection (DEP)
Processor Scheduling
Memory Usage
Thanks in Advance.
Regards,
Sonu

I don't generally spend a lot of time worrying about the OS setup these days -- I spend a lot more time getting extra performance from the Essbase side of things, when needed.
I don't know if my settings are optimial, but here's what I have:
Virtual memory: I have virtual memory set as up to 16GB on a separate partition (on a server with 8GB of RAM). Typically this Essbase server will be using 5-6GB for day to day operations with a 4-5 GB pagefile at any given time, and during intensive operations and when I shake the server to its knees with a massive ASO load/agg, the memory usage climbs.
DEP: Have it on. I don't imagine there is much to be gained by turning it off.
Processor Scheduling: Set to Background Services.
Memory Usage: System Cache
As I said, these aren't necessarily the best settings but I know they have worked for me. Other than the pagefile settings, I believe everything else is just standard for Server 2003. If I had to guess I would say that Server 2003 makes the assumption that you will be running server-type applications on it, and it leaves the option open if you wanted to tweak things for more of a desktop feel. If there is a specific Essbase performance issue that you are encountering that you want to try and address, you are better off identifying what you want to make faster, then thinking about ways to improve on it. I haven't found too many cases where there is some global setting I can crank to get better performance all around.
Jason
[jasons hyperion blog|http://www.jasonwjones.com]

K8N Neo2 Plat freeze on windows splash

this is my second motherboard and i am once again having the same problem where the computer freezes on windows splash, just as it starts to show the windows xp and the loading bar. i have tried to format the drive and it loads all the necessary files and when it starts to actually load windows it freezes again.
i have swapped out power supply's, i have changed cpu's, i have changed hard drives, i have tried different cd roms, i have tried with 1 stick of memory in all different slots. i basically have tried everything. i currently have a 74 gig raptor hooked up to sata port 3, which is what i'll be using mainly. i have cleared the cmos and still no help. also, every once in a while it freezes at the MSI splash too.
PLEASE HELP!! THIS IS THE SECOND MOBO i am starting to get tired of MSI real quick...

Quote
Originally posted by res0n0xg
you guys are not understanding me. the system cannot get to windows at all period! i can get to the bios at best, nothing more. it freezes right as it begins to startup windows, which is a huge problem as i cannot check anything like that. and i know by changing the plextor to the secondary ide channel its not going to fix the problem with not being able to get into windows.
Still waiting to find out what bios you flashed----The Motherboard or The Plextor!
Still waiting to know whether you installed the NV IDE Controllers. Because if you did, the os is having trouble initializing a device, which is why your system is hanging up at that point. The device it's having problems with is no doubt the Plextor IF you are running the NV IDE Controllers.
Disconnecting the device, as Supershanks instructed, takes that item off the ide channel and out of the equation---unless it's the Plextors' firmware you flashed.

My operating system windows XP not working with photoshop cloud, why not?

I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
Roy

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.

I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.
4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM
54e24e0e-dfc4-466b-a347-4bd95536773e03-Jan-1312:30 AM
22d351d2-6461-4f33-9fbd-6d31f769e73103-Jan-1312:30 AM
8a8da99b-335e-43bb-aa12-4634aa0b431003-Jan-1312:30 AM
a15bb095-aeb9-44e1-a79c-1a17cee207d503-Jan-1312:28 AM

None if these crash reports seem to have been send.
Do you have crash reports with a "bp-" prefix that were submitted and that show a crashing thread?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can use one of these to start Firefox in <u>Safe mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes

Photosmart C8100 operating system Windows 7 - no error message - no changes

Paper comes out with folded upper right corner.
Happens about 99% of the time.
Using H/P paper - both ink jet paper and premium photo with same results
Have followed video directions provided by H/P - no change
Have cleaned inside as much as possible with compressed air and hand vac.
See no paper scraps in path. Rollers seem soft and clean.
Anyone seen anything like this?

I could not even get to that window, I was able to select repair or complete install but when I chose repair, a message came up saying I couldnt repair that version of windows. It is the same disk I used for installation and it is in perfect condition.
Original HD configuration that was working was:
Slot 1 - original apple 250gb hd with System OS X 10.6.8
Slot 2 - 1tb hd formatted for OSX for storage
Slot 3 - 1tb hd with System Windows XP SP3
Slot 4 - 1tb hd with System Windows 7 64bit
HD configuration when that I changed:
Slot 1 - original apple 250gb disk was copied over to Slot 3
Slot 2 - unchanged 1tb hd formatted for OS X storage
Slot 3 - erased hd, reformatted and copied files over from hd in slot 1 using Disk Utility
Slot 4 - unchanged, Windows 7 64bit Ultimate installed now not booting
I have tried swapping the Windows 7 hd to each hd slot and rebooting (a Mac Pro gets really heavy after doing that 3 times!). Using startup manager, the windows boot option is unavailable. I can still boot into OS X in each placement without issues. I can go to System Preferences>Startup Disk and can see the Windows 7 option and select it. However even if I restart the computer from Startup Disk with Windows 7 selected, it will go to a black screen and say enter CD.
In case this helps, I had to purchase an original Windows 7 64bit ultimate and then create a new bootable system disk to install on this computer. I tried system repair from both disks and it did not work.
Im beginning to think that reinstallation is unavoidable, but still hoping that I can find a solution first. The actual installation isnt the major issue, it shouldnt take more than an hour to reinstall and update the video drivers. Its the installation of the programs and having to redo all of the settings on the 4 major programs that I am using that will literally take days. Oh man, somebody must know the answer!!
Thanks again for the response, I truly appreciate the help

"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks." Error

Hey Im getting the following error when trying to install windows from a USB.
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks."
I installed the windows 8 (64bit) iso using boot camp to a usb. I was able to do this after changing the info.plist to allow me to place the iso on the usb. After I make the partition and start the install, I get the above error. I formatted the partition in the installation but I keep getting this error. I've repreated the entire process but i keep getting this errror and the disk utility says my partition is a Windows NT File System (NTFS) so im not sure what's going on. If you can help me that would be greatly appreciated

I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

Windows cannot be installed to this disk 0. The selected disk has an MBR partition table. On EFI system, Windows can only be installed on GPT disks

Hi All,
I have been trying real hard to install Windows 8 on my Macbook Pro early 2011 model. I followed the instruction given by Bootcamp word to word, all things went very smoothly untill I was asked Windows Setup Instaled to selct the Hard drive. Here's the error:
"Windows cannot be installed to this disk 0. The selected disk has an MBR partition table. On EFI system, Windows can only be installed on GPT disks...."
Let me know guys what should I do?
Thanks,
Attiqe

You have started the Windows 8 installer in EFI mode, and you don't have to start in EFI mode on a Mac because your Mac emulates a BIOS and a MBR partition table in order to install Windows in non-EFI mode.
To start the Windows installer, hold the Option (Alt) key while your computer is starting and have a look at all the boot options you have. You should see two with a DVD above and they must be named "Windows" and "EFI Boot". Choose the option with "Windows" and follow the steps to install Windows. Note that you have to format the "BOOTCAMP" partition from the installer to be able to install Windows.
If you are trying to install Windows from a USB drive, note that your computer isn't compatible to do it

Can you download a 32 bit installer for photoshop elements 12 to install on a 64 bit system (windows 7)

can you download a 32 bit installer for Photoshop elements 12 to install on a 64 bit system (windows 7). Thanks in advance

yes, if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Opening an operating system window from Forms

An old feature from SQL*Forms was that you could open an Operating System Window by pressing a function key (or combination of keys)
I think this is still available in Oracle Forms 10g, but I can't remember which function key to press.
Can anyone help? I know that the function keys can vary across systems, so that I'm looking for is the default key (or keystrokes). I don't think it matters which versions of software are being used, but in case it does, the setup is:
Oracle Forms: 10gR2
Client PC: Windows XP
Client Browser: Internet Expolorer 6
Application Server: 10GR2 on Windows Server 2003
Database Server: 10gR2 on Windows Server 2003
The database has the ORAFORMS$OSC role granted to PUBLIC, and the "<OSC>" flag is showing in the Forms Console.
Control-K gives a list of the function keys, but doesn't list anything for opening a DOS window:
As far as I know, frmweb.res has not been altered, but it doesn't list an option for opening an OS window anyway.
This is not about the HOST command.
Thanks, Martin

Hi michaeltowse,
This is indeed something more complicated. Let me give you
some details about the project:
This project is to be initially created in Adobe Captivate.
It consists of the main menu that is to be created in Flash (menu
1); sub-menus, which are to be created in Captivate (menu 2); and
menus of sub-menus, which are to be created in Captivate as well
(menu 3). Now, the part where I need help on is the part that goes
from sub-menus (menu 2) to menus of sub-menus (menu 3). When any
option is to be selected from the sub-menu (menu 2), a new window
is suppose to pop-up (menu 3) that is suppose to be in Flash. This
new window is suppose to be a new Flash window and is not suppose
to be opened in a browser, but it's suppose to be opened in another
Flash window (SWF window). This whole entire project is to be
executed via an embedded Flash executable. Thus all the .SWF files
that were created in either Captivate or Flash are to be tied
together via a Flash executable. I was told in Captivate's Forum
that this may be done via ActionScript in Flash and I'm wondering
whether that is that case. Please tell me if my project makes
sense.
Thank you.

Business system is not seen in new business system window

A Business system has been created by admin in SLD
now when I try to declare the same BS as business system(manually .. new > assign busines system), I dont see it in create business system window...
please help

try refresh "clear sld cache" from Environment tab in ID

Error: The Operating system Windows Vista Version 6.1 is not supported

While installing Oracle Database 'win64_11gR1_database_11070' on Windows Server 2008 R2,x64, I get this error during Product specific pre-requisite checks:
"The Operating system Windows Vista Version 6.1 is not supported. Install the recommended service pack"
Edited by: aa100 on 16-Jun-2010 09:04

What's not clear with this message? Windows 2008 R2 requires 11gR2:
http://www.oracle.com/technology/software/products/database/oracle11g/112010_win64soft.html
Werner

Operating System(Windows 7) got corrupted ..!

Hi all,
Can someone please help me with my laptop issue ???
My Laptop Details :
Product name         : HP Pavilion dv6 Notebook PC
Operating System : Windows 7 Home Premium
RAM                             : 6GB
Processor                  : Intel(R) Core(TM) i3 CPU [email protected](2400MHz)
Purchase                   : Decemeber, 2010.
My Laptop problem :
My HP-laptop got infected with "virus" ( it says like found 38 virus).
And because of this virus attack , I was NOT able to open any application , for example say if i try to open "notepad" - then throws a message like " unable to open notepad application, though infected with virus".
So with this , i can confirm that my laptop was NOT allowing me to open anything because infected with virus.
Now i have 2 options to go further :
1) Remove virus , using antivirus removal software ( This i don't have , so NOT attempting to use)
2) Recover thru recovery option.
When i purchased this laptop , the laptop contains recovery partition within the laptop , so it's a built-in option.
Though i was NOT interested to keep that recovery partition in my laptop, I just burned recovery manager into 7 DVDs, and then deleted the partition.
With this my laptop contains drives like :
C: drive --> this contains OS related stuff
D: drive --> this contains my general stuff like songs , movies , etc
System drive --> 199MB ( not sure what thid contains )
Now coming to original problem/issue -
I have planned to use recovery DVDs , to recover to factory state.
Started with 1st DVD , it went upto 18% and then asked me to insert 2nd DVD.. and this went upto 30%.. now again asked me to insert 3rd DVD.
With 3rd DVD.. it went upto 40% , and then stopped responding. Nearly I've waited for about 3 hrs.. but NO use.. it's still hanged at 40% only.
So with 3rd DVD , it got hanged or stopped.
My doubt - not sure whether my 3rd DVD got corrupted or not , but i don't think so.. because 3rd DVD worked for atleast 10%..
Finally , I was struck here...
Not sure what's my next step
Please help me what I have to do now, like what steps to take... etc
How to recover?
Thanks
Kiran

Hi,
Lets start with your providing the complete product name or product number.
HP has produced and brought to market perhaps more than 10,000 models of notebooks and desktop PCs over the years. It is difficult to help you if we don't know which one you own and which operating system is installed.
Method #1: If the notebook will boot into Windows you can retrieve your Product Number by pressing Fn + Esc key. You can also read the Service Tag (if present) attached to the bottom of your notebook\netbook.
Method #2:
Remove the battery and look in the compartment where the battery was installed. You should see a printed part number and a product name. Please post one or both of them (with all alphanumeric characters here). If you live outside of North America, it helps us if you post the country of purchase.
Were you using an antivirus product (free or paid) when this issue happened?
What was the brand and product name of the Antivirus product?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

X-Fi Titanium Freezes System Windows 8.1 Enterprise X64

Similar Messages

Maybe you are looking for