X-Fi Titanium Line-In Mono / Latency Windows 7 64Bit´s

Hi!
I have connected my mixer (guitar) to the board?in Line-In?and have?a delay and mono recording :
Problem :? Line- In default settings in Creative Console Launcher (Audio Creation mode) , the sound is in Mono, without latency!
Problem 2: ?If i go to the recording mixing panel, in windows, and check "Listen to this device", the sound is in Stereo and?with latency!!
I Try different dri'ves and setting?s and still the same problem.
Please, can you tell me what?s happen? It?s driver?s problem or configuration?
X-Fi Titanium in windows 7 _ 64 Bit'ss
Thank you!

Please, can you help me ?

Similar Messages

  • No sound out of back line out MacPro Bootcamp 3.1 Windows 7 64bit

    No sound out of back line out speakers.
    MacPro Early 2008
    Bootcamp 3.1
    Windows 7 64bit
    Realtek HD audio driver.
    I have speakers plugged into the back line out.
    They work in Mac 10.6.4 (as always) and in Parallels 5 Windows 7 using Bootcamp partition.
    All other jacks work. In Realtek driver it shows nothing connected to that jack.
    Anybody else have this issue?
    Anybody else have solved this?

    Anyone at all?
    Even if you don't have the issue yet have a similar setup. Maybe I can figure out if there's a driver update I may need.
    BTW I KNOW others have this as I've seen this mentioned on other forums. What I do NOT know is whether it's "everyone" or there's something about systems that don't have this issue, I need to follow.

  • Maintianing multiple line items in main window  in scripts

    Hi folks,
      i want to print multiple line items in main window of script for eg 50 line items then my main window should continue in second page also. how to maintain this.
    can u provide me sample code for this..
    Thx in advance,
    Neelima.N

    You have an internal table with 50 lines, is it correct?
    Let's say, there's a MATNR field in your internal table.
    First do, what I wrote in my previous comment.
    The create an element in yout main window, like this:
    /E LINE_ITEMS
    /  &GS_MAIN-MATNR&
    In your printer program you have to code the following:
    LOOP AT gt_main INTO gs_main.
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    WINDOW = 'MAIN'
    ELEMENT = 'LINE_ITEMS'.
    ENDLOOP.
    This code will loop all 50 of your table entries.
    In the MAIN window will fit 30 entries.
    When the LOOP is reaching the 30th entry, SAP will automatically create a new page (because of the NEXT PAGE statement you set in the page settings in the SAPScript) and will continue the printing.
    Regards
    Tamá

  • Excel 2013 Border Lines not printing with Windows 8

    Hi. I have a problem with Excel files not printing the border lines of the cells in documents.
    There are 3 laptops with Windows 8 64bit in our company now using Office 2013. Only today did they mention to me that the borders from only those Laptops are not printing. In the PrintPreview it shows them, but they dont print. From my work PC that's using
    Windows 7 64bit and Office 2013 they do print.
    I'fe printed the a PDF printer on thier PC's but it also prints without the borders. These files are automatically created in excel format by the software our comapany uses, every user recives he's file via email and can then print it or send it to customers.
    The software does not display the title boxes correctly when using the default windows 8 theme (you cant see what you are typing, the background is black and the text aswell). To get past this we select High Contrast theme (thers no CLASSIC theme in windows
    8) and then tweak the settings a bit to get it as close to classic as possible.
    Now it seems like when you use high contrast as a theme Excel does not print broders, I came across this on the internet whit other people also having this problem. Thers no solution that I found that I can implement on those three laptops. I cant change
    the theme back if they wont be able to read what they type, and I dont know how to get the borders to print in every excel file they get in the future without having them to go through a whole process of changing settings everytime they need to print.

    Hi,
    If you use Excel program to create a file, then print it, Does this issue still persist?
    Also what happens if you change the borders style within Excel? for example, change the border line to thick.
    Also it seems that  a similar topic has been discussed here:
    http://social.technet.microsoft.com/Forums/en-US/0e68d860-bbd8-459e-a1e9-dfeded7de064/excel-2010-spreadsheet-cell-borders-not-printing-unless-the-page-lay-out-page-set-up-sheet?forum=officeitproprevious

  • Is anyone else observing black lines all around applications windows in Mavericks?

    Note that when I am in application windows am observing lines around my applistion windows as if there ewre multiple echos of the window and this happened since I upgraded from Mountain Lion to Mavericks.  I will attempt to insert a screen shot of the problem.  I'm wondering if this is a common problem with Mavericks and how to stop it or cure the problem.
    I'm using a 17" MBP
       Image to the left is enlarged image corner

    it seems to still be working... I thought the problem is generated by some program conflict so therefore I erased all .plist files in preferences/library from old programs I don't use especially those tweak programs from older versions of mac os x. And also all plist files that has to do with the word graphic. The computer works fine afterwards. The lines appeared after a while after starting the computer but now I haven't turned it off since 30 hours ago and it is still running. I've done a few restarts since the cleansing af plist files in the days before. I don't know still what the problem is but I know that I did one thing more and that is too changing "automatic graphic exchange" in system back and forth. I've a idea that it maybe was the trick.
    /Thomas

  • Windows 7 64bit and Sound Blaster X-Fi Titanium - No rear sound

    As the title says I have a sound blaster x-fi titanium running on a windows 7 64bit box. I have downloaded all the latest drivers and tools from creative. The issue is no matter what I do I cannot get the 5. surround working. I have the front 3 speakers working and I can even get it to double the two front side speakers to the rear, but not true 5.. I have tried both DD li've and DTS. I have an Onkyo HT-R550 receiver that supports both DD and DTS and I'm connected over a digital optical cable. Trying to figure this one out!
    I've gone through all the modes in the creative audio software and tried all the surround modes on the receiver.
    Please help

    Ok. I have actually formatted my hard dri've to fix another windows and I'm back where I was. I'm testing using the speaker page in the console. I get great sound from all 3 front speakers and my sub. What I've found when clicking the back two I will get a very quiet but clear test voice through both rear speakers, no matter which side I picked. Also the bass portion of the test comes through the sub as normal. I can't seem to get the rear speakers to test any louder.
    I did the surround sound speaker test and it all sounds good (without the PC involved). Also my PS3 plays great surround sound through it using the same optical cable.
    I also tried your suggestion with no improvement.
    What's next?

  • Multipule line text in create_popup_2_confirm window

    Hi all ,
    Please can any one help how to get mutlipule lines in this popup window
    comp_controller->window_manager->create_popup_2_confirm
    EXPORTING
    iv_title = 'Own Popup'
    iv_text = 'OWN text'
    iv_btncombination = if_bsp_wd_window_manager=>CO_BTNCOMB_CUSTOM
    IV_CUSTOMBUTTONS = lt_Button
    RECEIVING
    rv_result = Y_POPUP_AG_OR.
    IV_text takens only single line how to split multipule lines?
    thanks
    Rao

    Dear Arun kumar,
    Thank you, is it another way is used to WebDynpro Popup windo (if_wd_window_manager) like following way
      ls_text = 'Do you confirm....?'.
      INSERT ls_text INTO TABLE lt_text.
      l_popup = l_window_manager->create_popup_to_confirm(
                   text = lt_text
                   button_kind = if_wd_window=>co_buttons_yesno
                   message_type = if_wd_window=>co_msg_type_question
                   window_position = if_wd_window=>co_center ). "#EC *
    beacause webdynpro popup window can accept String table for the text column.

  • Strange lines/guides in composition window

    Can someone tell me how to get rid of these lines in my composition window. I'm not sure what i hit, but they appeared and now I can't get them to go away. They even show when all the layers are turned off. See screen shot. Any Ideas?

    See the section of After Effects Help of action-safe and title-safe guides:
    http://helpx.adobe.com/en/after-effects/using/modifying-using-views.html#safe_zones_grids_ guides_and_rulers

  • Possible to have 2 lines on mac or windows jabber client? I can do this on the iPhone client.

    Possible to have 2 lines on mac or windows jabber client?  I can do this on the iPhone client.

    No, they can only have 1 line.

  • XFI Titanium champion.Dolby live dts windows 7 64 hang/fix

    :Hi,i have an xfi titanium fatility champion card installed on my pc.My os is windows 7 64bit.Now i no this problem has been about for awhile,but can please someone supply me with the fix that stops the pc from hanging at shutdown and restart when dolby li've or dts is enabled,thanks Adyj7

    >Thanks for the answerThis is where it gets tricky.when i try a new install of windows and use the installation cd that i received with my card i find this enables me to use dolby li've and dts with no problems,but the auto update causes me several problems-when i try and update and install drivers and applications--st one is file layout bin--which i have followed the correct instructions for from creative--2nd...is setup.skn from cd----which i have also tried to sort out.After this the cd tells me to contact creative support? because i receive an error 00. I have even tried a fresh install of windows and then downloaded all the latest software from the creative site,installed everything with no problem,buut i find i can only use dolby li've and dts for a short while before it tells me to reinstall the application again!!!which i have tried several times!!!The only way i can get? dolby li've and dts to work correctly is by installling from the cd.Can anyone please advise me on what to do next,Thankyou and kind regards Adyj7

  • My iPhone 4 will no longer back up in iTunes after my upgrade to Windows 7 64bit.

    I used to have Windows XP 32bit and everything worked fine.
    I upgraded to Windows 7 64bit and installed iTunes 64bit (I've also tried running the installer as administrator [in the compatibility properties]).
    iTunes will recognise it with no problems and I can drag and drop anything I want to the iPhone, but I can't back up.
    Software versions: iTunes v10.4.0.80, iPhone 4.3.5.
    When I try to back up, the loading bar with either:
    Have a loading bar with diagonal lines forever or,
    it will start moving and freeze.
    I've tried leaving the process for hours, but to no avail.
    While the back up is being attempted, iTunes still retains full functionality.
    I would exit by sliding the bar on my iPhone (iTunes will retain the loading bars as if frozen) and then unplug it. At this point iTunes takes a few seconds to drop the loading bar altogether, and the little screen will reset to normal functionality.
    I believe this may be a iTunes-Windows thing as I did the following with my old laptop (Windows XP 32bit):
    Installed iTunes for the first time.
    Went into preferences and disabled the automatic backup option.
    Plugged in the iPhone, right-click "back up".
    The back up took less than 5 minutes.
    I don't understand why my main PC can't back up my iPhone.
    Can anyone help please?
    I've tried researching the same problems and I've ended up doing the following:
    Reinstalling iTunes,
    Tried changing the iTunes installation folder to "Program Files" instead of "Program Files (x86)",
    Deleting all contents from: "C:\Users\[Username]\AppData\Roaming\Apple Computer\MobileSync\Backup",
    Deleting the apps from my phone in case there are corrupt apps (doesn't make sense though as it backed up fine on my old laptop).
    I would appreciate any suggestions!
    Kind regards,
    Will

    Hi there,
    I have the same issue. Usually hangs after 10K od sometimes after 18MB of backup file.
    Config: iTunes 10.4., Win 7 64bit, iPhone 4 with iOS 4.3.3
    I tried all of these without success:
    - deleted backups via iTunes / Preferences
    - deleted backups from sync folder
    - created a new admin user and tried to sync
    - reinstalled iTunes
    - ran all Windows updates, restarted, reinstalled iTunes
    - ran iTunes / Diagnostics (says everything okay, only info which is strange: diag says I am not a admin user, which is not correct)
    Nothing helped. Who can help. I hope someone from Apple can take care, as I seem not to be the only one. Actually iTunes is the worst part about iPhone. Hope with iOS 5 and Cloud sync to get rid of iTunes.
    Any hints welcome,
    Cheers,
    Miguel-KA

  • Excel VBA - ActiveX Control - MonthView not available under ActiveX Toolbox for Windows 8 64bit MS Office 2010

    Hello,
    I have Windows 8, 64bit and Office 2010
    I am trying to get the 'datepicker' (MonthView) ActiveX control toolbox in Excel 2010 as part of a Excel UserForm I have created. I have spent all day trying to find a solution for my problem.
    I opened up the 'more.. ' but the MonthView/datepicker/calendar control is not listed.
    I referred to some articles and confirmed that I do indeed have the mscomct2.ocx file in the C:\Windows\syswow64 folder.
    I followed the instructions as above, opening up the Administrator Command Prompt and changed the directory to C:\Windows\syswow64 and typed in RegSvr32.
    I received a popup screen confirming my registration was successful
    Excel was closed. So I opened Excel and checked out the ActiveX Tool box and clicked on the 'More  Controls', but there was no listing for the Microsoft MonthView control, (nor datepicker/calendar)
    I then downloaded the latest Windows Common Controls 2 6.0 from the following site
    http://support.microsoft.com/kb/297381
    Copied the original file (2008) and saved it elsewhere on the computer for safekeeping.
    Extracted the new mscomct2.ocx.
    Under the C:\Windows\syswow64 I changed the original file properties to allow me to overwrite it with the new file. This worked … old file replaced.
    I then registered the new file via the Administrator Command Prompt (as above) and was notified that it was successful. I rebooted pc and went back into Excel to find the MonthView in the
    ActiveX toolbox, More Controls… and it still wasn’t there …
    I would be very grateful if someone could advise how I can get this control and allow me to use it.
    If I have left out any information that you need to resolve this issue, please advise.
    Cheers,
    TheShyButterfly
    Hope you have a terrific day, theShyButterfly

    Hi George,
    Thank you for checking this out ... :)
    I am using Office 2010 64 bit ...
    I found the
    mscomct2.ocx file originally within the C:\Windows\syswow64 directory (this was an original file .... which I expect was installed via Microsoft at the time of the Office installation.
    As I mentioned above, I followed
    the instructions (same as the ones you suggested), but still no go, even though it stated that the registration was successful ! :(
    Why weren't these features included in the 64 bit ? ... yes, I read the article ... but ... so MS doesn't think that people/developers would be needing this in due course?  I installed the 64bit version because I'm running the Win8 64bit version ...and
    I deal with a lot of large spreadsheets and can't afford to sleep whilst they decide to load.
    If MS included all the other ActiveX controls and some obscure ones, surely some bright spark could have thought that something as useful as MonthView should be included as 'basic' necessity when dealing with forms and sheets?
    Perhaps you could pass the suggestion up the line .... there are a lot of other people out there having the same problem ... I found heaps when I was looking for a solution.
    Sorry, I'm not having a go at you, but just incredibly frustrated .... the amount of lost productivity directly cause by trying to find a solution that doesn't exist ... it's been at least a good solid 24 hours.
    But thank you for taking the time to review my post and your suggestion. It's unfortunate that because you are part of the organisation ... you tend to cop some slack from frustrated people like myself.
    In relation to the pictures/screen dumps, 2 of them made it (I can see them in my post) ... one I deliberately left out because there was nothing on there that showed anything other than the rest of the 'More Controls' - nothing to do with the MonthView.
    Please feel free to escalate this to the powers that be ... and hopefully enough people will join the voice so a change can be made (I can dream ... can't I?)
    I've taken a screen dump of the Forms/ActiveX toolbox.
    I don't know what the next step is ... I guess you'd be able to advise.
    Cheers,
    TheShyButterfly
    Hope you have a terrific day, theShyButterfly

  • Windows 7 64bits Installing Internet Explorer 11 ERROR Neutral package installation failed

    Hi,
    The laptop is running Windows 7 64bits with Internet Explorer 10 and the Windows automatic updates is turned on. The problem happens when the Windows keeps installing the Internet Explorer 11 every time between shutdown process. So I decided to download
    IE11 offline installation and try to install from it but the problem doesn't solve, the installation still does not complete. I have tried to delete all files in the Windows temp folder and IE temp folder already but the problem still exist.
    Below is the details from IE11_main.log file
    00:00.000:
    ====================================================================
    00:00.000: Started: 2014/05/26 (Y/M/D) 11:00:44.473 (local)
    00:00.000: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
    00:00.016: Command line: "C:\Users\TBG\Desktop\IE11-Windows6.1-x64-en-us.exe"
    00:00.016: INFO:    Setup installer for Internet Explorer: 11.0.9600.16428
    00:00.016: INFO:    Previous version of Internet Explorer: 10.0.9200.16866
    00:00.016: INFO:    Checking if iexplore.exe's current version is between 11.0.9600.0...
    00:00.016: INFO:    ...and 11.1.0.0...
    00:00.016: INFO:    Maximum version on which to run IEAK branding is: 11.1.0.0...
    00:00.016: INFO:    iexplore.exe version check success. Install can proceed.
    00:00.016: INFO:    Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
    00:00.016: INFO:    Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
    00:00.016: INFO:    Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
    00:00.016: INFO:    Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
    00:00.702: INFO:    Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
    00:00.702: INFO:    Extracted Spelling dictionary for en to C:\Windows\TEMP\IE18CE4.tmp\Spelling_en.msu.
    00:00.702: INFO:    Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
    00:00.702: INFO:    Extracted Hyphenation dictionary for en to
    C:\Windows\TEMP\IE18CE4.tmp\Hyphenation_en.msu.
    00:00.718: INFO:    Trying to extract ID: 7128 (1033) as "IE11-support.cab"
    00:01.607: INFO:    PauseOrResumeAUThread: Successfully paused Automatic Updates.
    00:02.714: INFO:    Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded
    and extracted for use.
    00:02.730: INFO:    Launched program to check hardware: "C:\Windows\TEMP\IE18CE4.tmp\IE11-
    SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE18CE4.tmp\IE11-support\HardwareBlockingList.xml"
    00:02.870: INFO:    Graphics Device Information: Intel(R) HD Graphics Family
    00:02.870: INFO:    Hardware support check succeeded. Installation will continue.
    00:02.870: INFO:    Windows 7 operating system detected.
    00:02.886: INFO:    Service pack major: 1
    00:02.886: INFO:    Service pack minor: 0
    00:02.886: INFO:    Service pack name:  Service Pack 1
    00:02.886: INFO:    Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >=
    6.2.9200.16570 (True)
    00:02.886: INFO:    Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll:
    6.2.9200.16492 >= 6.2.9200.16426 (True)
    00:02.886: INFO:    Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18409 >=
    6.1.7601.17727 (True)
    00:02.902: INFO:    Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll:
    6.1.7601.18229 >= 6.1.7601.17617 (True)
    00:02.902: INFO:    Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >=
    6.1.7601.17888 (True)
    00:02.902: INFO:    Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
    00:02.902: INFO:    Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >=
    6.1.7601.18010 (True)
    00:02.902: INFO:    Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18254 >=
    6.1.7601.18254 (True)
    00:02.917: INFO:    Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >=
    6.1.7601.18247 (True)
    00:07.597: INFO:    Waiting for 0 prerequisite downloads.
    01:37.423: INFO:    The neutral pack was successfully downloaded from the internet. Installation will continue using
    the downloaded package.
    01:37.423: INFO:    Waiting for 0 language pack downloads.
    01:37.423: INFO:    Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
    01:37.438: INFO:    No reboot logic message NrApiStart(0), lParam=0x03771068 returned 0x00000000.
    01:38.000: INFO:    No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
    01:38.000: INFO:    No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
    01:38.000: INFO:    Installing with the downloaded package. C:\Windows\TEMP\IE18CE4.tmp\IE11-
    neutral.Downloaded.cab
    01:38.000: INFO:    Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package
    /packagepath:C:\Windows\TEMP\IE18CE4.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
    02:20.619: INFO:    Process exit code 0x80004005 (-2147467259) [Unspecified error ]
    02:20.713: ERROR:   Neutral package installation failed (exit code = 0x80004005 (2147500037)).
    02:20.729: INFO:    No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
    02:20.744: INFO:    No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
    02:20.775: INFO:    No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
    02:20.869: INFO:    Waiting for Active Setup to complete.
    02:20.963: INFO:    PauseOrResumeAUThread: Successfully resumed Automatic Updates.
    02:32.694: INFO:    Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
    02:32.741: INFO:    Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
    02:32.756: INFO:    SQM Upload returned 403
    02:36.453: INFO:    Cleaning up temporary files in: C:\Windows\TEMP\IE18CE4.tmp
    02:36.531: INFO:    Unable to remove directory C:\Windows\TEMP\IE18CE4.tmp, marking for deletion on reboot.
    02:36.531: INFO:    Released Internet Explorer Installer Mutex
    Taweesak Archawamaitreekool

    DISM.log would make this clearer.  And using ProcMon I suspect would really make it snap out at you.   <eg>
    C.f. (credit for a recent discovery)
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/i-get-error-9c59-when-updating-internet-explorer/03d4473a-867b-44a5-9a37-913e9a5879cf?page=8&msgId=afe85da0-36e0-4160-860b-d2973e78c8b9 
    Unfortunately, since then others have quickly stuck a pin in this balloon, finding that it is just one more bump in the road, but at least working around this coding error should change your symptom.
    Good luck
    Robert Aldwinckle
    Thank you very much.
    I have tried to create a symbolic link as suggested on a forum but the problem still cannot be solved. The error message from IE11_main.log file is exactly the same as before.
    For DISM.Log, here are the details from the started time of the installtion process
    2014-05-29 16:53:55, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2014-05-29 16:53:55, Info                  DISM   DISM.EXE:
    2014-05-29 16:53:55, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
    2014-05-29 16:53:55, Info                  DISM   DISM.EXE: Executing command line: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab
    /quiet /norestart
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Manager: PID=9144 Successfully loaded the ImageSession at "C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583"
    - CDISMManager::LoadImageSession
    2014-05-29 16:53:58, Info                  DISM   DISM Image Session: PID=8324 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:58, Info                  DISM   DISM OS Provider: PID=8324 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM OS Provider: PID=8324 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Warning               DISM   DISM Provider Store: PID=8324 Failed to Load the provider: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Failed to get and initialize the PE Provider.  Continuing by assuming that it
    is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Manager: PID=9144 Image session successfully loaded from the temporary location: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583
    - CDISMManager::CreateImageSession
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2014-05-29 16:53:58, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2014-05-29 16:53:58, Info                  DISM   DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:58, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2014-05-29 16:53:58, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
    2014-05-29 16:53:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2014-05-29 16:53:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 CBS is being initialized for online use. More information about CBS actions can be
    located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2014-05-29 16:53:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2014-05-29 16:53:59, Info                  DISM   DISM OS Provider: PID=8324 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
    2014-05-29 16:53:59, Info                  DISM   DISM Driver Manager: PID=8324 Further logs for driver related operations can be found in the target operating system
    at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
    2014-05-29 16:53:59, Info                  DISM   DISM Transmog Provider: PID=8324 Current image session is [ONLINE] - CTransmogManager::GetMode
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Encountered the option "packagepath" with value "C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab"
    - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Package Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~11.2.9600.16428
    with CBS state 4(CbsInstallStateStaged) being mapped to dism state 3(DISM_INSTALL_STATE_STAGED) - CDISMPackage::LogInstallStateMapping
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Initiating Changes on Package with values: 4, 7 - CDISMPackage::Internal_ChangePackageState
    2014-05-29 16:54:00, Info                  DISM   PID=4640 Scratch directory set to 'C:\Users\TBG\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
    2014-05-29 16:54:00, Info                  DISM   PID=4640 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Failed to get and initialize the PE Provider.  Continuing by assuming that it
    is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Manager: PID=4640 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Executing command line: c:\windows\sysnative\dism.exe
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. -
    CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: WimManager
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Getting the help information collection for the provider: WimManager.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Registering information from the help collection from provider: WimManager.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(wimcommands) and category(localtoplevelhelp) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(cleanup-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(remount-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(mount-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(unmount-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(commit-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(get-wiminfo) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(get-mountedwiminfo) and category(wimcommands) for the
    provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Getting the help information collection for the provider: Compatibility Manager.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    Taweesak Archawamaitreekool

  • Reports builder on Windows 7 (64bit)

    Hello,
    I hope someone can help me with this....... I have installed Oracle Forms an Reports (64) on Windows 7 (64bit) successfully, but when i try to start report builder it does not open and no error apeared. I try to run it in cmd and i get the following message : The Reports Builder is only supported on the Linux x86 and Windows x86 operating systems... So is it true that I can't run reports on 64bit Windows or am I doing somethin wrong? What can I do? Can I install Forms/Reports (x86) on my version of Windows and will it work?
    If someone has any idea please hepl me,
    thank you!!

    Today I installed FMW 11.1.1.3 and got the same error message when calling rwbuilder.bat. I had to remove the line "goto end" in the batch file to get Reports Builder running. I havn't tested the stability so far but at least I can run the builder. It is (as expected) the 32-bit software. If there are problems I would try to run it in compatibility mode.
    Regards Juergen

  • Help setting up my new IPod Touch on iTunes on windows 7 64bit

    Hello there,
    I need help setting up my new IPod Touch to my Itunes 10 application on a PC running windows 7 64bit. I have watched the tutorial on how to do it but what the tutorial says it is supposed to do is not what is happenning for me:
    1. In the tutorial it tells you to connect your ipod to your computer, then, (if it is for the first time) when the ipod appears and is selected, a window will come up allowing you to name your ipod, and begin selecting the options you wish to use.
    I did as instructed but quickly came against some technical issues.
    My issues:
    1-1: When I selected the new iPod Touch for the dirst time I got an error message.
    A) This was quickly fixed once I calld up apple support on the phone (turns out an IE browser setting was blocking it.)
    1-2: With that fixed I selected my iPod Touch again but instead of the window indicated by the tutorial, I instead got an iPod registration form window.
    1-3: I filled out the form and pressed the submit button (thinking everything was fine), then a new window came up that looks like this:
    Free Find My iPhone
    Free Find My iPad
    Free Find My iPod touch
    Set up Find My iPhone for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPad or iPod touch.Set up Find My iPad for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPod touch.Set up Find My iPod touch for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPad. _Learn More_
    _Set up Find My iPhone_
    _Not Now_ _Set up Find My iPad_
    _Set up Find My iPod touch_
    Find My iPhone (or iPad or iPod touch) enables you to locate your iPad with Wi-Fi or iPod touch only when it is on and connected to a registered Wi-Fi network. Find My iPhone is not available in all countries. "
    The first three lines and the first paragraph are indented as if there should be some type of graphic there, but it is missing. The underlined words indicate that they are supposed to be links, but they don't go anywhere, they are broken!
    Now wheenever I connect my iPod Touch and select it the above window comes up and nomatter what I try it will not move or change.
    Please help!
    MSRankin

    Try setting up the device in a new user account. or visit register.apple.com and verify your device is registered

Maybe you are looking for

  • IPhone says "Restore Needed", but iTunes doesn't recognize it. Now what?

    My iPhone was sitting untouched this evening. When I woke it up, it said "Restore Needed. iPhone cannot make or receive calls. Restore from iTunes." But when I plug it in to my computer, iTunes doesn't recognize it. I have reset the phone to no avail

  • How to adjust x axis of line chart for dynamic values from universe

    Dear All, I am new to SAP Dashboard. I got one requirment that, user will pass single value to universe using prompt in Dashboard. Based on that prompt value / input parameter, universe will deliver data to plot line chart in my canvas. But, on every

  • Change material BOM / item / Class Recursion

    I'm looking for a way to change the "recursiveness allowed" flags in the "Class Recursion" tab of a BOM item in transaction CS02. The flag corresponds with the fiels REKRS in table CLRK. No BAPI or FM found after half a day of searching. The CSAP_* f

  • Is there a way to restrict the blanket release qty or amount to agreed amt

    Hi, We have a requirement to restrict the blanket release qty or amt of the item to the amount that is agreed on the blanket Purchase Order line. Is there a setup at supplier or in purchasing that dictates this Thanks, user12048986

  • Copy 3g to 4g

    I will buy the new ipod touch 4g and i want to copy all my email photos saved pass-codes for wifi networks and so on from the 3g to the 4g. with mobile me it should work but i want to use a free programm.