X-FI Titanium not recognized

Hello, st post and problem with my X-FI Titanium Mod SB0886. I recently changed to Windows 7 but I can not get any of the creative programs to work outside the AutoUpdater. Any time I try to open any of the applications (Creative Audio Panel, 3DMIDI, Console Launcher) I get a pop up saying "The audio device supported by this application is not detected. The application will exit." or "The audio device supported by this application may not be present or may be operating in an unsupported mode. You need to close the application."
I have reseated the card and reinstalled the driver but still the same problem

I'm starting to hate Creative... Had to join this forum just to try to get there software off my pc...
I have the same issue but my driver wont install.
I DL'd all the latest from there page, driver, that fix, the new software...
I have a Rampage extreme 2 mobo that came with a garbage "Fake" X-Fi card.
Every time I start the PC it decides my new Fatalty card is a "HD audio device" and installs it as such.
I dissabled on board audio in the bios, this still happens...
Going threw add/remove in the control panel I find two Creative programs:
Creative Alchemy (X-Fi MB Edition)
Creative MediaSource 5
Neither will uninstal... when attempting I get the "Setup.exehas stopped working" error
Driver when I try to instal tells me there is no device.
I see these posts all over in forums about not being able to remove there software.. and I never see a fix with out having to buy and install some 3rd party app.... Do you guys know maybe how I can get rid of it and get this card up and running? The new drivers I heard work great... but as of right now looks like the same ol same ol...
win7 x64
Thanks
ps maybe if any one has the .inf file? I couldn't find a DL for that... just the .exe installer and I can't manually point the card to that as a driver to use :P and of course the driver wont install with out detecting my card... /sigh
Ok got the above working but have the OP's same issue now.. I have tried that file and no luck, any other sugestions? Thanks

Similar Messages

I am trying to connect my sandisk titanium flash drive to my macbook pro. the light is on but it is not recognizing it on the computer. any ideas

I am trying to connect my sandisk titanium flash drive to my macbook pro. the light is on but it is not recognizing it on the computer. any ideas

Do other USB devices work on your MBP?
Does this USB stick work on other MBPs?
There is a possibility that the stick requires more power than the MBP delivers. Try it on a powered hub.
Ciao.

[sound] ALSA - X-Fi Titanium - emu20k2 - not recognized by alsa

Hi,
I can't get my X-Fi working, neither with oss nor with alsa ! I tried several things with no success, searched a lot among forums but couldn't find anything that worked.
Here are some details :
Recognized as a pci card :
[noar@arch-noar rc.d]$ lspci | grep -i creative
03:00.0 Audio device: Creative Labs X-Fi Titanium series [EMU20k2] (rev 03)
modules loaded (incuding ctxfi) :
[noar@arch-noar rc.d]$ lsmod | grep snd
snd_ctxfi 95682 0
snd_seq_dummy 1479 0
snd_seq_oss 29240 0
snd_seq_midi_event 5516 1 snd_seq_oss
snd_seq 50562 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5281 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 39509 0
snd_mixer_oss 17730 1 snd_pcm_oss
snd_bt87x 9657 0
snd_pcm 72321 3 snd_ctxfi,snd_pcm_oss,snd_bt87x
snd_timer 19537 2 snd_seq,snd_pcm
snd 58906 9 snd_ctxfi,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_bt87x,snd_pcm,snd_timer
soundcore 6161 1 snd
snd_page_alloc 7361 3 snd_ctxfi,snd_bt87x,snd_pcm
but not recognized in alsa :
[noar@arch-noar rc.d]$ cat /proc/asound/modules
1 snd_bt87x
[noar@arch-noar rc.d]$ cat /proc/asound/cards
1 [Bt878 ]: Bt87x - Brooktree Bt878
Brooktree Bt878 at 0xdfffd000, irq 17
here is my rc.conf :
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: Set the locale during daemon startup and during the boot
# process. If set to 'no', the C locale will be used.
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="fr_FR.utf8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Paris"
KEYMAP="fr-latin9"
CONSOLEFONT="lat9w-16"
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!snd_pcsp)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="arch-noar"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng @network netfs crond dbus)
...my modprobe.conf :
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
option snd-pcsp index=2
options snd-ctxfi index=0
...my sound.conf :
# /etc/modprobe.d/sound.conf
alias snd-card-0 snd-ctxfi
alias sound-slot-0 snd-ctxfi
...and of course I can't run any mixer as my soundcard doesn't show up.
I'm stuck with this problem for a week now...I ran Ubuntu Lucid Lynx LTS with no sound problems before that .
Any ideas ? any help would be highly appreciated !
(please forgive me if i made mistakes, I'm french so english isn't my native language, I tried my best ! )
Noar

I almost forgot :
I'm running kernel 2.6.37 - 64bit
[noar@arch-noar ~]$ uname -a
Linux arch-noar 2.6.37-ARCH #1 SMP PREEMPT Fri Mar 25 15:10:00 CET 2011 x86_64 Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz GenuineIntel GNU/Linux

Striped RAID not recognized by Macbook Pro

I have a pair of external firewire 250GB drives that I had configured into a striped RAID set on my Powerbook Titanium. I recently purchased a Macbook Pro. When I plug the drives into the new machine, they are not recognized and the array (and I use the term loosely since it only refers to a pair of drives!) will not mount. When I launch DIsk Utility, the drives appear in the list and are offline. I cannot find a way to bring the thing online.
When I created the RAID, I used Mac OS Extended (Journaled) format. The disk set still works fine on my Powerbook and checks out fine with Disk Utility on that machine.
Does anybody have any suggestions on how to use my striped set on my new machine?

Hi, P. J.
Unfortunately, I don't have an answer for you, but — seeing as how your question has gone unanswered — I thought I'd offer the following hypothesis: I suspect it may have something to do with the different partitioning schemes used by PPC and Intel-based Macs.
Theoretically, "Any Macintosh computer running Mac OS X 10.4 and later can mount GPT-partitioned disks," per "Technical Note TN2166, "Secrets of the GPT." However, the RAID you created on your PPC-based Mac used the APM (Apple Partition Map) scheme.
Perhaps all the bugs haven't been worked out, esp. concerning RAID. For example, there is a known issue that some Intel-based Macs cannot boot from RAID volumes.
You may want to try your question on the MacBook Pro Discussion to see if others with your same Mac have had better luck. I'd also suggest providing more details (manufacturer, make, model, etc.) of the FireWire drives you've used in the RAID. If both are from the same manufacturer, then you might also want to check with the manufacturer to see if they've had similar reports.
One option, albeit a good bit of work, would be to backup the contents of the RAID to another drive, then recreate the RAID on your Intel-based Mac, restore the data, and see if that works on both your PPC- and Intel-based Macs.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Powerbook not recognizing hp printer drivers

so, my powerbook for some reason is not recognizing new HP printer drivers. this has happened twice now with two different printers (both mac-compatible). this is a new thing--i used to use an HP printer quite happily with this laptop.
here's what happens:
i install. installation is successful, hooray. the hp device manager opens, i choose my device (the Deskjet F300, in this case), and i'm ready to go.
i open Word to print a doc. i get an error saying "word cannot print due to a problem with the current printer."
i open my Print Preferences panel and lo and behold, there's no printer in the list. i click the [+] button to add a printer.
my Printer Browser appears. the DJ F300 appears in the list as a USB device (there are no other printers). I select it.
in the subwindow below, i see this:
-printer name: Deskjet F300
-location: home
-print using: [dropdown menu of printer drivers]
i can't proceed until i select a driver. the F300 is not listed among the HP drivers in the dropdown menu, so i click the button that says More Printers.
the AppleTalk browser opens. there are no printers, but after a moment, a dialog box pops up saying a new driver has been detected, and do i want to reload the browser? i click OK to reload the browser.
and nothing happens. the driver still does not appear anywhere.
i have uninstalled and reinstalled the software, both from the CD and by downloading it from HP's site. i have run disk utility, but it didn't help. does anyone have any ideas?
if this is at all related--my computer also doesn't recognize that i've agreed to my iTunes user agreement (i have to re-agree every time i launch iTunes) and it doesn't remember that i want make iPhoto my default (although i click OK every time). it also won't remember changes to my screen saver--all small, annoying things i can live with, but maybe a clue to what's not working?
g4 titanium powerbook Mac OS X (10.4)

Liz, when you download the new drivers from HP's site download them to your desktop, then open HP's folder, and drag the download to this folder it could be located in the Applications folder or the Utility folder, Then and only after you drag it in the HP folder double click it to launch the drivers.
When you use the installer or just plug in the USB it may or maynot print. This will normally give you the folder I speak of in one or more locations. When you go to Hp's site it normally will not download the upates and drivers to that folder and launch them. You have to double click them.
Don

Product Not Recognized................

I am trying to install the latest drivers for my SB X-FI and am getting the dreaded 'Product not Found' error - I cant believe this is still a problem with the installer...............
I have 64-bit Vista and am using the ?XFXA_PCDRV_LB__04_0079.exe install package.
When I run the ?dxdiag program and look at the Sound tab is shows 'Creative SB X-FI' - so why cant the installer see this?
What is the purpose of this check besides frustrating customers?
Any solution to this annyonce besides avoiding Creative products in the future?

If you have WinRar or WinAce installed on your system, then you can right click the file and choose extract.....and then you can extract the contents to whereever you want. Then you can go to device manager, and to your device, and choose update, and then have disk....... and manually browse to where the driver has been unzipped to.... Then your file will take a few moments and then it will install.....
You will reboot and then you will be using the new driver most likely. You can run the driver again and do an uninstall and then a reinstall.....and that may work best for you.
If you do not have WinAce or Winzip, then you can usually go to start and run and then type temp or %tmp% and this will open one of two of your temporary directories. The creative driver will usually unzip itself there when you double click the installer. So even if you get the "device not recognized" error. ? Dont close the windows, just tab out and browse to that temp folder and copy the driver folder somewhere else. If the driver is indeed unzipped to your temp folder, its filename on the folder may be gibberish like? .........JHAGWWtpes.tmp or something like that, depending on your operating system, etc.
Good luck and I hope this works for you, as it has worked for me on occasion when I was mixing my Titanium X-FI drivers with my Fatality Pro PCI.

"The disk cannot be used because it is not recognized"

I have a MacPro (Sept. 2008 model) and now I tried to burn a CD, when I insert the CD-R it will recognize the CD insertion and ask me if I want to mount it with finder, I click yes and then it gives me this error and it doesn't mount:
*"The disk cannot be used because it is not recognized"*
I also tried a DVD+R and it gives me the same error, but when I insert a CD or DVD that is not a recordable media it mounts perfectly. Anyone knows how to correct this?
I inserted the same CD-R in my Aluminum MacBook (late 2008) and it worked perfectly, I was able to burn it without a problem.

This gets more strange by the moment. Toast will see AND burn the blank DVD/CDs when inserted, at least when using the PowerMac's internal Pioneer burner. (I haven't tried it on the external TDK burner.) I changed DVD/CD System Preferences from "Show in Finder" to "Launch Toast Titanium" and had no problems. The application launched on DVD insert and did the data burn flawlessly, though a bit slower than I remember it being on Tiger.
But there is still this inconsistency between the PowerMac and the MacBook Pro. On the former, Leopard simply refuses to recognize any media placed in the internal burner, but on the MacBook Pro insertion of a DVD/CD functions just like Tiger used to - mounts the untitled media on the desktop, allows drag and drop file adds, and allows burning by OSX finder or menu. Has to be some strange bug in Leopard code for a PowerMac G5.

400 mhz G4 PB not recognizing Airport card

HELP!!! i'm a PC girl learning Mac, and bought a used G4 powerbook to try it out. I then purchased a used Airport card to go wireless. However the computer is not recognizing the card. It is installed correctly- barcode up, all the way in, but no go. Is there anyway to test (like will a trip to the Apple store help or will they look at me like i'm from the dark ages?) the computer or the card? I was going to attempt to harvest the card from my snow base station but don't have a star tip for my screwdriver to get into the thing. Any suggestions would be greatly appreciated!!!!! THANKS!

Thanks brody. That is the card I have. I was guessing at the OX I have as I bought this machine used and truly have no idea where to find half the stuff much less what it is. since I figured out where to find it, I'm running 10.4.11.
I appreciate everyone's help. I've had the hardest time figuring out just which model I have. i've yet to find a picture just like it. I'm not even sure it's a 12, since dummy me didn't realize they're like tv's and measured diagonally. I think it might actually be a 15 inch if that makes a difference. 2 hinges in the back, all the ports in the back under a cover (I must have looked rather comical until I figured that one out) card slot is on the left side, dvd drive in the front. I was told it was a titanium but honestly it didn't matter to me so I didnt' check to make sure. I just wanted something relatively cheap to see if I really liked a mac before i plunked down a couple of thousand on a new one. It wasn't until I had trouble with the card that I found out all these different ones existed.
also, it looks like there are actually 2 slots to the card reader, although I cannot access it from the battery bay. The slot I can access that the card does actually fit in is from the left outside. the other slot is under it (I can see it with the keyboard off and the card removed) and looks as thought the card would be inserted similar to the one i can use, except the body of the powerbook is in the way. I'm afraid to do much more than I have hardware wise as my PC kicked the bucket so this is my only working computer right now. Let me know what you guys think!!
THANKS!!!

USB Device for IPOD not recognized by Windows, whether ipod connected or no

During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
Any suggestions?

I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
This is driving me up the wall. Is there a glitch with iTunes 7?
Can anyone help me out?? Thanks
Windows XP

Aio Remote: PDFs not recognized by Google drive.

Aio Remote on iPad Air2 iOS 8.1.1 - I created a PDF on my iPad from my HP Envy 7640 using Aio remote app. In the files/document section it's there (3 pages) as a PDF. But when I upload a copy from Aio Remote to Google Drive it's not recognized by Google Drive as a PDF even though it has a PDF extention. I have other PDF files stored in Google drive that are perfectly fine. It must be something in your app that is the problem.

More info: if I send it from Aio remote as an email attachment to myself I get a PDF that I can upload to Google drive and Google drive reconizes it as a PDF. again proving it is Aio remote that is doing some thing wrong when uploading to Google Drive.

I recently upgraded to ios7 and now my PC is not recognizing my iphone

I am having several problems. I recently upgraded to ios7 and now my PC (Windows 7) is not recognizing my iphone. 1) I am getting an error message when itunes opens: "Itunes could not connect to the iphone because it is locked with a passcode. You must enter your passcode on the iphone before it can be used with itunes." How did it get locked and how do I unlock it without losing my data? What do they mean by passcode? I don't have a 4-number code to get into my iphone activated. In fact, I've never had a passcode.
2) I cannot download my photos from my iphone onto my computer because my computer doesn't recognize my iphone. In other words, my iphone does not show up on my computer (no iphone icon, no DCIM folder).
3) This is a separate issue but it is also very confusing: I went online to check my iCloud and I cannot see any data (icloud.com). But I know that I set up iCloud when I upgraded to ios7 and it backs up my data every night. What am I doing wrong, am I unable to see my data and photos?
Why is this happening? It was bad enough that when I upgraded to ios7, I lost my Notes - I have no idea why they didn't return. But now essentially my iphone is not recognized when connected to my computer and this is very frustrating. I have read numerous previous postings regarding downloading photos onto the PC and regarding this passcode error and cannot find a resolution, so I would appreciate any help.

No problem!
This will make it easy for you:
http://www.tuaw.com/2011/07/09/quicken-wont-run-on-lion-heres-10-mac-apps-to-cur e-those-blue/

I an getting an error with photo merge in PS cc . It gives me a code tmp00000001 using from photoshop and if I try from bridge it tell me that I need to select more than one image. It is not recognizing the photos I am selecting in bridge. please help. my

A new problem with CS5 forced me to download PScc but the problem is still there. I am getting tmp00000001 in photo merge when importing multiple files from inside PS and if trying from bridge I am getting a pop up box telling me I need to select more than 1 file. Photoshop potomerge is not recognizing my selections from bridge..!! please help.. my knowledge of computers is a 3 on a scale of 1-10

if i run this particular code
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
This returns 1 row of data
However if i run a small part of the above code...
SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
It returns a lot of rows with a status of 2
Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
:(

IPod nano does not charge & is not recognized by computer or iTunes

I have a 1st generation nano 1 GIG.
It appears "dead."
It is not recognized by My Computer, iTunes or the Ipod Updater (The updater asks that I connect the iPod, which I do). The iPod diagnostics through iTunes also reports that my iPod is not connected.
I have tried my iPod on 4 different machines, with one of them having USB 2.0.
I tried the following from Jeff Bryan. (I don't know if the links from his post have carried over into this post.) So I will list the things I have tried near the end of this post.
- My iPod won't turn on.
- iPod battery doesn't charge.
- iTunes 7 doesn't recognize the iPod.
- Your Windows PC doesn't recognize iPod.
- iPod appears in Windows Explorer but does not appear in iTunes.
- iPod does not appear in iTunes.
- Fast user switching in Windows XP is not supported.
I tried resetting my iPod by switching the Hold button on and off and then pressing Menu and the Select button for 6-10 seconds. I have done this over and over and over.
I have uninstalled the latest iTunes, reboot, reinstall - same problem.
I have stopped the iPod service, plugged in the iPod, but it isn't recognized by My Computer as stated in the Apple Do-It-Yourself Help. I launched iTunes - same problem.
I used the window cleanup utility, reboot, reinstall iTunes, connect iPod - same problem.
I have used the Windows ipconfig utility to change my boot parameters, but still nothing.
If anyone has any ideas, I would greatly appreciate them.
My iPod is just shy of 6 months.
I do have a replacement contract with Best Buy - but I would like to cover all the bases before I succumb to defeat.
Thanks
XP Home with USB 1.1 Windows XP 4 machines, all XP, 2 XP Pro, 2 XP Home, 3 have USB 1.1, 1 has USB 2.0, 2 machines have latest iTune

I'm having the same problem, my ipodnano is about a year old and I can't figure out what to do. I just installed the new itunes on my new laptop with vista premium. I'm desperate for a resolution, do you have any suggestions at all. Any help is greatly appreciated. Thank you

Iphone not recognized by windows or itunes

Can anyone please help me figure out how to resolve this issue? My iphone 4 is not recognized by my PC. My OS is by Vista Home Premium Service Pack 2. I tried the various "device not recognized" troubleshooting to no avail. I tunes is up to date. I even turned off my security sw for a bit to see if there was a third party conflict...all to no avail. There has got to be someone out there who has the smarts to show me how to fix this. Please advise and many thanks in advance!

Jason,
I understand why Apple doesn't cover the water damaged phones under the warranty, but do you know why they don't fix them if the customer is paying? Is it just because they want the people to buy another phone so they can make more money? I guess I just don't get it.
The cost to repair a device and all of its components is more than the cost of a new device.
Other than the article I linked above, this is the part of the warranty/legal forms that would apply:
+"US v1.0+
+Apple reserves the right to refuse+
+service on products that have serial numbers altered, defaced or removed or that are damaged due to+
+accident, abuse, neglect, misuse (including faulty installation, repair, or maintenance by anyone other+
+than Apple or an Apple Authorized Service Provider), unauthorized modification, extreme environment+
+(including extreme temperature or humidity), extreme physical or electrical stress or interference,+
+fluctuation or surges of electrical power, lightning, static electricity, fire, acts of God or other external+
+causes. In such event, Apple may return the product to you without servicing it, and may charge you the+
+Diagnostic Fee."+ from http://images.apple.com/legal/terms/repair/docs/070108aiphoneOOW.pdf
-Jason

5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

X-FI Titanium not recognized

Similar Messages

Maybe you are looking for