X-FI Xtreme Audio (OEM) problems with Guitar Po

Hey all, I just upgraded from a SB Li've 5. Sound card to an X-FI Xtreme Audio Card and am now having problems with guitar port. There seems to be a delay or lag time from playing to actually hearing the sound. It sounds like its about half a second or so which makes it really annoying for trying to play. Is there a remedy for this or is there something wrong with the card/drivers?Also, is Line in and Mic levels no longer in the windows volume?playback control?

jutapa wrote:
frubsen wrote:
Hey all, I just upgraded from a SB Li've 5. Sound card to an X-FI Xtreme Audio Card and am now having problems with guitar port. There seems to be a delay or lag time from playing to actually hearing the sound. It sounds like its about half a second or so which makes it really annoying for trying to play. Is there a remedy for this or is there something wrong with the card/drivers?Also, is Line in and Mic levels no longer in the windows volume playback control?
You should be able to control I/Os through Windows mixer(s) and Creative Control Panel (comes with the driver package). If you like to install those software intend for X-Fi you need to download the CD image from BadBoys site (if he still has the site up an running). You get those mixers showing up either through panel which pops up when you enter mmsys.cpl in start->run... prompt (Audio tab, Volume buttons). Individual mixer panels can be called with commands sndvol32 (play) and sndvol32 /r (recording). The lag you have there is normally called as latency. You get rid of it by using ASIO driver mode with 2 - 0ms latency settings. You can set the latency through ASIO controlpanel. If the guitarport has an ASIO driver it's own, use it's control panel or try with asio4all driver (http://www.asio4all.com).jutapaMessage Edited by jutapa on 0-9-20080:0 PM
Is this a standalone driver? Or is it something used in addition to an existing sound driver? I'm having a similar problem with my mic, there is a delay (and it has to be turned up really loud to be heard, although that may be a different problem) and I'm looking for a solution.

Similar Messages

  • Problem with Guitar Rig 4 in GarageBand

    Hello everyone, I've got a problem with Guitar Rig 4 in GarageBand (I've got a brand new MBP 2011 received last week, so I've got Lion), when I click on "scan" to import presets, only 5 presets appear : "flicker" "overdriven" "pure rammfire A" and B and C, does somebody know why ? those 5 presets are located in the same folder as all the other presets... I really don't understand
    Thank you !

    Hey mate,
    I've had exactly the same problem for quite some time. But I just found a solution. I signed up here just to share it with you, so I hope it works like it did for me!
    So try this:
    Go to HD/Library/Application Support/Native Instruments/Guitar Rig 4/Demo DB and copy those 3 files.
    Next, open HD/Users/Username/Documents/Native Instruments/Guitar Rig 4/Db and overwrite the files there with the ones you copied.
    Voila! Hope it helps!

  • Audio Sync Problems With Share YouTube -- OSX not iOS

    I've replicated this several times. It's maddening and bizarre. *Share YouTube*
    Exporting a FCPX video using the "SHARE" menu and choosing YouTube causes the resulting upload to be out of sync when viewed in Safari or other browsers on iOS
    Viewing the same video on the iPad with the built in YouTube app, the video plays in sync
    Viewing the same video on AppleTV 2 (with the 5.1 update), the video plays in sync.
    If I export using Export Media menu item under the SHARE menu, and then from QuickTime Player choose Export For Web (under the File menu) and manually upload, the video is in sync.
    Note, that using
    Feel free to try on this short simple and silly video http://www.youtube.com/watch?v=cGTQNMJdPRQ&list=UUiDxioBFJCPC-8OUFifsx8A&index=2 &feature=plcp
    Anyone else experience this. Is this a bug or a feature? Rather not go through three steps to upload a simple YouTube video.

    We've got the same problem and yep, it's infuriating that are so few posts about it.
    It doesn't happen with every video, but the vast majority of files that we've tried to either export directly to YouTube from QTX or export locally and then manually upload to YouTube end up with shockingly bad audio sync (and also some colour issues, but that's another story).
    As a small video production company we were chuffed to bits with the improved export speed in QTX and quick to make use of it. But when we realised there was a problem, we had to revert back to using QT7's painfully slow export.
    We've run experiments on a brand new iMac and MacBook Pro running the most up-to-date version of OS X and still no joy. Always the same audio sync problems with the same video files.
    In the meantime however,  we've found that the settings advised on this YouTube help page have given us the best (albeit slow) results at both 25fps and 30fps when exporting from QT7:
    http://support.google.com/youtube/bin/static.py?hl=en&guide=1728585&topic=172857 0&page=guide.cs

  • Audio CD problems with 10.4.3

    I have a problem with audio CDs. After updating to 10.4.3, iTunes did not play my audio CDs. It has the spinning beachball for ever.
    I have tried the following.
    1. Removed the "CD Info.cidb" file from Library/Preferences, but no help.
    2. Installed 10.4.3 combo updater. And then tried the same. It reads the first CD fine, but if I remove that CD and put another one, it spins for ever.
    Has there been any solution to this problem so far?
    I am using 10.4.3 on PowerBook G4 667 MHz.
    Thanks.
    Macademia Nut.

    I am having an identical problem.
    I have an identical set up (powerbook G4 667mhz).
    My problem also appeared when I updated to 10.4.3 and ITunes 6.0.1.
    I can no longer play CDs on computer, nor can I copy song files to my desk top from an audio cd. When copying a file from a store-bought audio cd in the finder, I get the error message "finder cannot complete operation because some data in <song title> could not be read or written (error code -36)"
    I hope somebody can figure out a fix.

  • Audio sync problem with videos imported from iPod Touch

    I have an iPod Touch 4th Generation that I used to shoot video at a family birthday party. When I imported the footage into iMovie '11, the audio is not in sync with the video (video is about two seconds behind audio) and there is only the left channel of audio. I verified that the video on the iPod plays just fine--no audio sync problem, both left and right channels work. I just upgraded to iOS 5 on the iPod Touch. The iMac is running Snow Leopard 10.6.8.
    As a workaround, I can import the video into iPhoto instead. When I play the video in iPhoto, there are no audio sync problems and both channels of audio can be heard. I have imported other iPod Touch videos successfully into iMovie '11 in the past few months, but this has been the first time these problems have occurred. Any help would be appreciated.

    Premiere cannot handle clips with variable framerate.
    Your converted clips need to have constant framerate.
    Otherwise use a converter like Handbrake.

  • Audio CD problems with Snow Leopard

    Hello! I just bought a new I-mac and immediately updated to Snow Leopard. Unfortunately, I am having sporadic problems with Audio CDs on the machine. Sometimes it refuses to eject the CD and the computer locks up.
    Even worse, sometimes when I leave the CD in the drive for long periods of time and the computer goes to sleep, the computer does not recognize the CD and I need to restart. And then when I restart sometimes the computer STILL does not recognize the CD in the drive. It takes a second restart for it to figure out there is a CD in the drive.
    Also the eject button on my keyboard doesn't work at all.
    Does anybody have any advice or suggestions?

    I would reset PRAM.
    http://support.apple.com/kb/HT1379
    If that does not help, reset SMC (power management)
    http://support.apple.com/kb/HT1543
    which is just disconnecting the iMac from power and reconnecting it using a precise procedure. When you reconnect it, if you are using a crowded or old surge suppressor (power strip), try connecting it directly to the wall power outlet by itself, at least initially. After starting it up, connect only your standard USB keyboard/mouse. Use it that way for a bit and note if this problem recurs.
    If it does not, add one peripheral device at a time (with particular attention to the USB devices), and note if the problem recurs at any point.

  • N8 / Belle / Car BT Audio - random problem with au...

    I updated my N8 to Belle when it was first released.  Ever since, I've been experiencing random problems with audio volume and how it is being output from the phone.
    I have paired my N8 with my car (2012 Subaru Legacy) which allows me to make phone calls via the car and stream music to the car via BT from the N8.  Everything works fine most of the time, but there are some anomalies.
    For example:  In the morning on way to work, I used Music Player to listen to songs in the car.  Later on during lunch break, I made two phone calls from the car.
    After work, I turned on Music Player and started listening to songs, but realized that the audio is being played from N8's loudspeaker, and not the car speakers, even though the phone was paired with car BT.  
    I restarted the application but nothing changed. I then turned-off BT on phone, turned it on again, and this time the audio was still output via the loudspeaker, but I could now see the song details on the car stereo display and skip to next song using car controls.
    Another example:  I've also noticed that sometimes after using BT Audio in car, when I later play songs, the volume coming from N8's loudspeaker is maybe at 20% of what it should be and the volume buttons have to control over it.   It seems almost as if the phone still thinks it is connected to car and is letting the car stereo do the amplification. 
    I tried different settings, but I can't pinpoint any specific cause of this behavior.
    Has anyone experienced the same?  Solutions? 

    For the song details to appear on the screen of car stereo you have to make sure your .MP3s have the ID3 info stored in them.  You can do that with programs like Winamp/MediaMonkey/others.  But I found that only works in my car when it wants to; it is never consistent, and most of the time it doesn't work.  I blame the phone software for that.
    As far as sound quality with my BT Audio I couldn't ask for better.  It is very clear.  I have most of my MP3s encoded at 192Kbps; I found the lower rates not to be very clear.  I have not tested FM Transmitter in the Subaru (because BT works so good), but in my previous car it did not work well at all.  It would only work in one spot (under dash in the foot area) and even then it wasn't very clear.

  • Frustrating audio sync problem with MJPG clips!

    I make short films from our family trips, using the jpg:s and mjpg clips made with our Canon compact digital camera. This has worked fine (since PE 2). Now I often get a frustrating audio problem on SOME of the MJPG:s, SOMETIMES.
    When I play the clip in PE7, after 0.5 - 1 sec the audio jumps back to start, before it continues to the end along with the video. This makes the audio out of sync with the video (lagging 0,5 – 1 seconds).
    The only way to fix this is to separate the audio track from the video, cut the start of the audio (to where it jumps back to the start) and then move the audio track to make it in sync. Besides being a tedious way to do on all clips, the audio track is not possible to extend “in the other end”, so I have to cut the video at the end as well…
    However, this is not happing on all MJPG clips but only on some.
    Also, the clip looks fine in other programs, e.g. wmp or windows movie maker.
    I have tried other MJPG decoders but that does not make any difference (so it’s obviously no problem with the video). The audio is PCM Audio 44100Hz, 706 kb/s mono.
    Now, when I tried repairing the PE7 installation, updating DirectX, removing all caches in the project directory, rebooting, it worked! The clip I was testing was in sync!
    But, the next day I noticed the sync problem again on a lot of other clips… I then thought I should try to force PE to reanalyze the video again, so I remove the cache-directories (did not help) and moved the project file to another directory (this did not help, but on the other hand, I didn’t see PE7 analyzing the video again, so maybe there is a cache somewhere else??)
    I noticed (looking at properties on the clip in the preview window in PE7), that the original audio is 44100Hz mono, but PE7 converts it to 48000Hz mono. Don’t know if there is some problem there, but it should not be any difference on different clips from the same source… (and the “jump back” in audio is 0,5-1 seconds regardless of clip length, and not the 9% that the difference in frequency would suggest + the audio plays in “normal speed”).
    I’ve run out of ideas!!
    Please, does anybody have any constructive ideas or tips on what to try? Are there more caches to clear? Are there conflicts with another program, like wmp?
    (I use PE 7.0 on a 4Gb, quadcore system running Windows Vista Home Premium 64 bit.)
    // G

    Thanks, I suppose I can start batch-converting my mjpg movies before importing them inte PE7, if that would make this problem disappear. I'll try that (I have FormatFactory installed, but VirtualDub seems like a nice tool if that is better), although that would make the process a bit more long-winded...
    Regarding GSPOT info on a file that works and one doesn't, there are typically no difference between them (except length and content, of course). In fact, as I mentioned above, the same movie did not work until I did some reinstalling, clearing caches etc. Then the same movie suddenly worked OK again.
    I attach the GSPOT info on that file.
    (I never had this problem on my older XP system that run PE2...).
    I will try converting to see if the problem disappears.
    Thanks!
    // G

  • X-Fi Xtreme Audio install problems.

    #? I cant get windows XP to recognise my Audio Card...
    st, I uninstalled the onboard audio drivers/application - I was prompted to restart so i did.
    I loaded BIOS and turned off onboard audio.
    I re-started PC and attempted to install the Audio card from install disk. (FAILED at 72%)
    Card only shows as two seperate PCI devices in "Device manager.
    I downloaded latest drivers and tried to install but they wont work because the card is not recognised as anything but "PCI Device"
    I uninstalled all creative + drivers
    Tried 3 different drivers now..NO LUCK
    I have latest BIOS version on MOBO?
    How do I get XP to recognise the card as an Audio card and not PCI card ?
    There are no phone numbers on this site and no support on the install disk..PLEASE HELP ME?

    Yet another wasted download..
    Did not help me.. I got this result :-
    "Setup is unable to detect a supported product on your system. Please ensure your product is fully installed before running this Setup Program. Setup will exit."
    I went to the drivers folder and tried to install the XP drivers..With this result :-
    "No supported Device Found"
    This is obviously a big problem with MANY MANY posts that are similar.. FIX IT CREATIVE !! (I am tempted to buy a different brand Audio card)?

  • X-fi Xtreme Audio card problems!

    Hi!?I bought a X-fi Xtreme Audio card today. installed, and now I get a big fps drop in Battlefield 2, first of all I cant enable Creative X-fi in the Audio tap under options in the game, it says the card does not supoort bla bla bla, if I chose to use Hardware I cant play the game due to extreme lag, with normal software, same settings I used with my onboard card, Realtek AC 97, I still got big fps drop... What is this **bleep**?Hey I want my money back, this **bleep** is useless... or is there some sort of fix? or is my card complete garbage?kind regards from an angry customer?//Stripflash

    First, please refrain from using profanity on the forums: it is against the rules.
    Next, it sounds like something definately isn't working right, as the X-fi shouldn't drag down your framerate at all. I would start off with a "cleansweep" uninstall/reinstall. On this website, click "Support" then KnowledgeBase, and in the searchbox type "SID72."
    Let us know how it goes!
    Good luck,
    Dale

  • Video/Audio Connection Problems with 10.4.5

    I'm experiencing problems today using iChat to connect with another Mac user. I've been connecting to this user with no problems and then tonight, I could only text chat. When I accept an incoming video chat it appears to be connecting and then I get a message saying I've left the chat. On the other end, they get a message saying I didn't accept. The opposite happens if I initiate the video chat. No luck either with just audio.
    Unfortunately, I have two variables and I'm not sure which one is the culprit. This afternoon my system updated to 10.4.5. As part of that update, there apparently was a change to iChat but there isn't any documentation. My other variable is that I also switched from my cable modem provider to DSL. I originally thought it was a DSL issue but have followed all the steps I could find to take the DSL modem out of the equation. I'm using BellSouth for DSL and a Westell 6100 modem. I've set the modem to bridge mode and disabled DNS so that my Airport Extreme is handling all those duties. As far as I can tell, the Westell is only acting as modem and Airport is doing the rest, just as it did when using the cable modem.
    Unfortunately, I'm still not connecting. While I didn't get a chance to test the DSL prior to the 10.4.5 update, I'm wondering if there's a problem with the update since it did have an iChat component. The other Mac user is still on 10.4.4.
    Anyone have any ideas?

    Hi Eric,
    I would stop and actually check the Airport is getting the Public IP address.
    Open Airport Admin Utility for the Applications/Utilities folders and log on
    Go to the Internet Tab.
    This should be set to the connection Type of the ISP and show DNS Subnet and IP details.
    The IP details should be the same as what you see when you go here http://www.myip.dk/
    It might also pay to try without the Airport first and check if the modem is in fact the problem (or at least the ports or Firewall), despite what you think you have set.

  • Audio static problems with video playback - Anyone Else?

    I went to archive.org and downloaded two movies for my iPod. Great. However, when played on the iPod there is this scratch/pop in the headphones every couple of seconds.
    It doesn't matter what headphones you use.
    It doesn't happen when you play the same video on the computer either in iTunes or Quicktime Player. And this is definitely more than the normal hiss and pop of old movies. Its piercing when you have in ear headphones on and quite distracting with apple buds.
    What I am wondering if this is a problem with all iPods or just mine?
    I don't have the problem with music videos or home made movies. Just the two movies I downloaded from archive.org. However, they do play fine on my computer. This is my last day to return the iPod and get a new one instead of service unit (which his actually probably new also because the Apple Service dept probably hasn't had refurbs yet, but I digress).

    I'm having the same problem with a file from archive.org. The file plays back fine using QT on my PC, but on the ipod the audio has periodic bursts of static.
    Here's a link to a file that exhibits the problem:
    http://www.archive.org/download/disorderin_the_court/disorder_in_the_court256kb.mp4
    Movie info is: MPEG-4, 320x240, Millions
    AAC, Stereo (L R), 48.000 kHz
    Movie FPS 29.97
    Data Rate 346.70 kbits/sec

  • Optical Input on Creative Labs Sound Blaster X-Fi Xtreme Audio PCI-E with Logitech z-5

    So i plugged in my Optical cord into my new sound card the Creative Labs Sound Blaster X-Fi Xtreme Audio PCI-E and it worked only in the Front right, Front left, Front centre, and the subwoofer. Now i hear i need a external decoder... but then again that my sound card should decode it as well... the place i bought my card recemended a optical cord for my card?with the?speakers i have?(the?Logitech Z-5500) How much are decoders? What should i do next? Creative seams to have limited support especialy on optical inputs.

    I must have answered something like that in another thread sometime ago, but here goes:
    A single SPDIF connection, optical or coaxial, will only transfer stereo in analog form; no rear or centre channels!
    There are two ways you can get all speakers playing via such a connection:
    () Get your speakers to upmix the audio source to play on all fi've of them
    (2) Output a Dolby Digital (AC3) or DTS signal. These contain the multichannel information encoded in the stereo signal. A suitable decoder (such as the one contained in the Z-5500) will be able to analyze the signal. Unfortunately, this is something you can mostly find in movies.
    So, to sum it up, no natural everyday multichannel sound over one SPDIF (e.g. no EAX, directsound3d etc.)

  • Audio latency problem with VST, SONAR and Audigy 4 PRO

    Hello all,
    I have a slight problem with audio performance on my computer and I can't isolate what is wrong. I am using Cakewalk SONAR 4 studio edition, and a recently purchased Audigy 4 Pro soundcard. ( I know it's not quite professional grade, but it works well for me) I recently bought some string instruments from the Vienna Symphonic Library. So far, I love the sound of these "virtual instruments" if you will. The problem comes when I try to record them. I get stuttering and dropouts when I try to record the track in Sonar. I've tried the WDM drivers in 16 and 24 bit modes and the ASIO drivers (which apparently only support 16 bit!?) I know Creative has mentioned that these cards can record easily at 24/96 which is what I'd like if possible. Vienna instruments come in a 24 bit format. Is there something I'm doing wrong or do I need to seriously consider a different soundcard? I use Sonar to bring in the Vienna instruments as a VST. I also apply a reverb on it. When I just play this stuff on my MIDI keyboard, it all sounds great and keeps up. The moment I go to record though, I get dropouts after about 15 seconds or so. Also, is there no way to get ASIO 24 bit support for creative's consumer level cards? I'd be happy with the WDM's personally if those would work. I've looked into the KX project as well but haven't had a chance to try their drivers yet. On a different note, what are the significant differences between ASIO and WDM if any at all? (aside from supported bit rates) My current computer setup is quite powerful and I don't use much CPU power at all so I don't think it's my setup. Intel E6700 (2.67Ghz) Core 2 Duo, 2GB DDR2-800, 320GB Seagate SATA in RAID 1, Nvidia 7600GT, and Creative Audigy 4 Pro. Any help, or insight would be greatly appreciated!
    Matthew

    Audigy 4 Pro should support 24-bit/96 kHz w/ ASIO --> have you selected those I/O drivers in Sonar audio settings (Options-Audio-Drivers -tab). ! You need to unselect all I/O drivers first to get those 24/96 drivers selectable)?
    Dropouts comes from various sources. Have you checked if the read/write caching is set properly (Sonar, try different settings)?
    Stuttering may come from shared IRQ/resources and PCI Latency settings.
    If your graphics card is not PCIe then, make this registry tweak
    Run regedit and search the key named as DisableProgPCILatency
    - set all 'DisableProgPCILatency' key values to 1 (HEX or DEC) (1 = disabled, 0 = enabled)
    - boot to BIOS settings and find the "PCI latency timer" option --> set its value to 32 or 64 (this is global PCI latency setting)
    - reboot
    and check the IRQ situation. If there are IRQ shares between Audigy and other devices/controllers, try to get those fixed by disabling unneeded controllers/devices or by moving the Audigy into another PCI slot (PCI slots #3 and #4 are normally not shared).
    Couple meaninful differences between WDM/KS and ASIO are;
    - you can't get latency lower than 10 ms w/ WDM/KS (well, you can in Sonar by manually editing those buffer values but, the result is not good when you go under 10 ms buffer values (buffersize / samplerate * 1000 = latency in ms --> 512/96000*1000=5.33ms)
    and
    - you can record from one stereo (you can split this to two mono) source at a time w/ WDM (recording source is set in CT Surround Mixer (or windows recording controls))
    - ASIO supports (Audigy serie) locked 'resolutions' only - 16/48 or 24/96
    Also, tweak your system for music - http://www.musicxp.net/
    Some information on CT ASIO -
    http://forums.creative.com/creativel...essage.id=1726
    jutapa
    Message Edited by jutapa on 12-17-200606:01 PM

  • Xmod problem with guitar hero control

    I'm having problems with my xmod sound card and guitar hero controller. As soon as I plug in the controller to my usb port, the sound on my computer becomes distorted and theres a lot of static. Even if I unplug my controller the sound continues to be distorted until I restart my computer. My best guess is that it might be some sort of usb conflict. Any ideas whats causing this?

    I have the same problem and I just want to know if u find a how to fix it... If yeah, plz, tell me how.

Maybe you are looking for