X-Fi Xtreme Music Digital In on Vista x64?

I am trying to send a PCM signal from my CD player digital coax output to the X-Fi Xtreme Music input (the Flexi Jack). In the Console I am setting the input as Digital I/O, mode it is Audio Creation Mode, but I cannot get any signal. If I switch Flexi Jack to "Line In", I have signal (Monitor record Line In).
I have signal coming out from the same Jack when it is configured as Digital I/O. The cable has stereo jack on one end and 2x RCA on the other. The White is the digital out, I am guessing the the Red shall be the Digital In...
Did somebody manage to make this work

Just an update, I'm throughly convinced the problem lies in the fact that the "SPDIF Input Settings" drop down menu in the Audio Console is grayed out and I can't access it.
I read some things about how the Flexijack doesn't support Digital Inputs, only outputs, but according to this chart,
http://us.creative.com/products/product.asp?category=3&subcategory=55&product=780#
The X-Fi Xtreme Music does support the SB Digital I/O Module. Again, any help would be appreciated.

Similar Messages

Xtreme Music Digital

Hello,
I've upgraded to 64-Bit Vista, and I can't get the SPDIF passthrough on my Xtreme Music card to work. The SPDIF Input Settings option under the SPDIF tab is grayed out in the console.
I'm using the latest driver, and it specifically said on the download page that SPDIF passthrough is supported in Vista 64-Bit. What am I doing wrong?

To get a 5. spread on the 5500 with an optical or coaxial connection, you need to use the Effect button on the controller and switch to PL II Music. You can then spread the sound to the back using the Levels button and turning Surround up to your desired level. There are also some changes you can make using the Settings button.
As for the Dolby Digital and DTS, that will only show up on the controller when you are watching a DVD which supports either/or.
Hope this helps

X-Fi Xtreme Music + Digital I/O + Optical Connection for z-5

Hi there, im new and very raw so i was wondering if anyone can clear some things up.
Ive had my X-Fi Xtreme Music card for about 3 months and in that time i've been using the 3 analogue 3.5mm connections to my z-5500 controller, and i've had no problem in terms of getting full 5. sound for music and in games. Ive recently bought a digital I/O from creative to have an optical connection to the z-5500 controller.
My questions are:
1) Can i get 5. sound using the optical connection When i had the analogue connection, my z-5500 controller said it was 6. surround, but when i changed the input to optical, the controller said it was stero and not 6. surround. Ive testing the speakers in the creative console, but my rear right and rear left is mostly comming from my front right and front left speakers (something is comming out of the rear speakers but its very low)
2) Ive downloaded the dell drivers and went through the process as noted on another thread and i've successfully got the dts and dolby digital working, but how do i know it works Is there some way i can test and see if it works I mean isnt my z-5500 controller supposed to say dts or dolby digital because at the moment it isnt.
3) Is there any sound difference between an optical connection and the annalogue connection in terms of playing mp3's and games. Im aware that dts and dolby digital isnt available on the analogue connection, but i dont watch many dvd's on my comp so is there an point to have the optical connection
Thanks very much for anyone that helps.

To get a 5. spread on the 5500 with an optical or coaxial connection, you need to use the Effect button on the controller and switch to PL II Music. You can then spread the sound to the back using the Levels button and turning Surround up to your desired level. There are also some changes you can make using the Settings button.
As for the Dolby Digital and DTS, that will only show up on the controller when you are watching a DVD which supports either/or.
Hope this helps

XFi xtreme music PCI + HD 2900XT vista 64 drivers incompatib

I can get my HD 2900XT card working fine on its own.
I can get my XFi Xtreme music PCI card working on its own.
Installed together they cause constant lockups and crashes.
Which ever cards drivers I install second after a clean windows install takes many many hours. Very odd.
Disabling AVS unified stream- no effect
Disabling XFi driver with card installed improves stability slightly but still multiple crashes.
Any suggestions, bar snapping the sound card in two?
My system
Vista 64 (fully updated)
Latest catalyst drivers.
Latest XFi creative driver
Pro X2 6400+
Mb asus M2R32-MVP latest (0906 bios, onboard audio disabled)
Mem 2Gb Xms2 800Mhz corsair
Hd Raid 0 2x500Gb
Wireless PCI belkin 54g
Graphics Sapphire HD 2900XT 52MB PCI-express
Sound PCI XFi xtreme music (tried both PCI slots)

THIS IS A 3RD PARTY METHOD AND OF COURSE THERE IS NO SUPPORT !!!
BEFORE YOU PROCEED PLEASE UNISTALL EVERYTHING AND USE DRIVERSWEEPER OR DRIVERCLEANER TO CLEAN YOUR REGISTRY TOO !!!
Ok here's a new alternative way that new driver will work 100% both XP and Vista (32/64)
install the 2007 suite (please do custom and do not install the audio drivers except everything else)
http://rapidshare.com/files/09758046/2007Suite-PAX.part.rar
http://rapidshare.com/files/09760807/2007Suite-PAX.part2.rar
http://rapidshare.com/files/09763635/2007Suite-PAX.part3.rar
http://rapidshare.com/files/09766722/2007Suite-PAX.part4.rar
http://rapidshare.com/files/09769992/2007Suite-PAX.part5.rar
http://rapidshare.com/files/09770659/2007Suite-PAX.part6.rar
(please burn the suite on a CD or DVD)(some applications have been moddified from the original 2007suite-pax, please re-download the suite!!!)
Ok after the installation of suite is finished do not restart your PC and install the following drivers:
http://rapidshare.com/files/09755063/SBXF_PCDRV_LB_2_5_0006_FX.rar
Now you can restart the PC. Tested with all versions of windows (Windows XP / Vista both 32 and 64 bit !!!)
Master Volume works, remote control works too... CHECK IT OUT

X-Fi Xtreme Music + Digital I/O Module Prob

I am attempting to use my X-fi Xtreme Music in conjuction with the Sound Blaster Digital I/O Module and my speakers logitech z5500
I have selected in the Audio Console configuration that the FlexiJack be used for Digital In, not Microphone/Line-Into get 5. digital surround sound using
At the beginnig everythings was working,the out "output" light. but after 2 houres, sound stopped suddenly, and my logitech consol indicated " no optical data" i still had sound in chanel direct, but not anymore in optical.
I desintalled my sound card, reinstalled it, for the same result " no optical data".
Few houres after it worked again, ( and i did nothing!!
!! ) and 3 houres after, same problems " no digital data" !!
I'm completly desesperate !
His someone have the same problem? can it be my sound card or the I/O module which have a problem
thamks for your help

hi jason
thank you for your answer (and sorry for my english ;-)
When the speaker indicate no optical data, the I/o module doesn't emit the light anymore.
unfortunatly, i can't test soundcard and I/O module on an other computer.
i don't think my system is the problem, I also update with the latest driver's card.
i bought my XFI card on 06/05/06 and i just received my I/O module from creative store
do you think guarantee can be apply on this case ?
for information see below my system information
Produit=Sound Blaster X-Fi (S/N: 320xxxxxxx466, Date d'achat: 2006-05-06)
[Informations syst?me]
Processeur=Intel (famille s?ries 5) (Vitesse d'horloge : 2.8 GHz)
Total RAM=024 Mo
Syst?me d'exploitation=Windows XP v5..2600
Affichage=NVIDIA GeForce 6600
Multim?dia=Realtek High Definition Audio
Multim?dia 2=ATI TV Wonder Video Capture
Multim?dia 3=ATI TV Wonder Audio Capture
Multim?dia 4=Creative SB X-Fi
Multim?dia 5=Audio Codecs
Multim?dia 6=Legacy Audio Drivers
Multim?dia 7=Media Control Devices
Multim?dia 8=Legacy Video Capture Devices
Multim?dia 9=Video Codecs
Multim?dia 0=ATI TV Wonder Video Crossbar
Multim?dia =ATI TV Wonder TV Tuner
Multim?dia 2=ATI TV Wonder Audio Crossbar
Multim?dia 3=Microsoft Kernel System Audio Device
Multim?dia 4=Microsoft Kernel Wave Audio Mixer
Multim?dia 5=Microsoft WINMM WDM Audio Compatibility Driver
Multim?dia 6=Logitech Microphone (Web)
Lecteur de CD/DVD=HL-DT-ST DVDRAM GSA-H0N
thanks for your help
neguoc

X-Fi Xtreme Music on Vis

I have the X-fi Xtreme Music card and windows vista and when i play games, my games dont recocnize that i have a good sound card and wont let me turn on EAX effects on the in game audio settings, even though i have set my sound card to gaming mode. Anyone know whats going on?

DirectSound in Vista is now completely software based.
You will need to use ALchemy to enable Hardware Acceleration and EAX in Vista unless the games supports OpenAL nati'vely.

X-Fi Xtreme Gamer Fatality Pro Vista x64 Drivers Unavailabl

How come there arent any dirvers for my X-Fi Xtreme Gamer Fatality Pro for Vista x64 ?
Keeps saying.. "No Update Available"Message Edited by RudeBoyNvidia on 06-26-200709:50 PM

Tnx Will c what I can do. It makes it easier to plug?the earphones?in/out in the front that the back. Would be nice if the card could switch between the output sounds.

Vista x64 SP2 Install Broke My Volume Panel

Hi,
As subject says.
I installed Vista x64 SP2 yesterday and now my microphone wont work because?in the control panel it says Microphone FP not connected.
This is obvious I dont have a front panel!
I used to change this in the Volume Panel and all would be well except now I have installed SP2 it wont let me load the volume panel.
It shows up in my task bar next to the clock and I can right click on it. It says Creative SB X-FI and I can select the Enable?DTS etc etc so the driver is installed ok but when I double click it to get the volume panel on screen nothing happens.
It doesnt even come up with an error.
I have tried uninstalling everything and reinstalling = nothing.
Then done an auto update, still nothing.
I hope someone can help, its really annoying not being able to talk to anyone over TS.
My specs are
Asus P5KE
Core 2 Quad Q6600
GeForce GTX260
4 x gb 066mhz memory
2 x WD Raptors RAID0
Soundblaster X-FI Titanium Fatalty PCI-E
Logitech Z5500 Digital Surround Sound
Vista x64 Ultimate
Thanks in advance
Message Edited by MikeChandler on 05-28-2009 03:5 [email protected]

Excellent all fixed.
Not as easy as we thought though.
First had to uninstall everything via add remove programs.
Then deleted everything I could find that related to Creative.
I found stuff in Program Files / Program Data & Program Files (x86)
Unfortunately I couldnt delete it all because it was in use, so had to reboot in safe mode and delete it all from there.
Then installed the package you suggested and indeed Volume Panel and everything else works again.
Thank You

How to connect SB X-FI XTREME MUSIC with Creative Inspire 5.1 Digital 5

Hi,
I want to know what I have to do to connect my x-fi xtreme music with my creative inspire 5. digital 5700 due to listen music with all? 5 twiters. I have windows vista ultimate 32bits. Thanks!?JoanMessage Edited by joanantoni on 07-9-200703:54 AM

With your Inspire 5. Digital 5700, your best bet is?using the analog Front and Rear input connections on the decoder and connect them to the X-Fi Xtreme Music front (Line Out )?and rear (Line?Out 2)?output connections and then enable CMSS Music or CMSS Movie Mode on your Digital 5700 decoder which will then give you a 4./5. Upmix. Gi'ven that you don't have a Center connection on the the Inspire 5. Digital 5700, no connection can made to the your Front Center satelite speaker/Subwoofer (Line Out 3) on your X-Fi Xtreme Music card. I'm led to understand that Creative speaker systems do not need Bass Redirection to reproduce proper Bass frequencies on your Subwoofer and not on your satelite speakers but you may want to test this simply enabling and disabling Bass Redirection, on your X-Fi Xtreme Music sound card, to your own personal taste. Alternately, you can concurrently connect your Inspire 5. Digital 5700 via the Coxial Digital/PCM Input to the FlexiJack input/output jack on the X-Fi Xtreme Music and then enable Digital I/O mode for the FlexiJack in the Audio Console found in the Windows Control Panel or?in the Entertainment Mode or Game Mode Consoles. Unfortunately the FlexiJack only provides a 2 conductor connection therefore it only supports 2. Speaker system connections?therefore you will still have to enable the CMSS Music or CMSS Movie Modes on your Inspire 5. Digital 5700 decoder to produce a 4./5. sound upmix. Sadly, no optical connection can be made between your Inspire 5. Digital 5700 and your X-Fi Xtreme Music sound card without the installation of the X-Fi I/O Dri've or X-Fi I/O Console at, of course, additional expense. From my standpoint, the X-Fi I/O Dri've is a good value given the number of external inputs and outputs in offers. Again, it's a matter of what your personal connection requirements are and budget. Hope this hel
ps.

Xtreme Music/ Vista/ Installed but no sou

Hi guys, Im having great trouble with my Xtreme Music card. I have downloaded the vista driver from the Soundblaster site. I made sure any other drivers were uninstalled and disabled the onboard sound. I am using a Creative Digital i/o adapter also. Everything seems to be installed correctly and even the small graphic equalizer next to the Digital i/o icon in Control Panel is showing a signal however there is NO SOUND. Im a bit baffled.
I have read through a great number of the posts here and found similar issues but no solution. Apologies if I am repeating an issue.

Don't know about your problem but i have a different one.
I installed the latest drivers from CL site and then today i was checking the Windows update site when there was a Creative XFi update available. So i got it and it just screwed all the sound up. Made my mic echo and allsorts.
Teach me for trusting MS to supply updates for something that as naff all to do with them realy. Should of know because the last time i did this for my Nvidia 8800 card it did the exact same thing by screwing everything up. Doh! lolMessage Edited by taylorig on 08-20-200706:20 PM

Windows vista 64 bits + xfi xtreme music + logitech g51 + SWAPS CHANN

Hello ! I am heber from argentina! bs as! federal discrict! Hey guys! you are soo cool! you help me a lot of times! but now i have to write to you becausa i dont get a solid solution to my problem. I search and see that there are some users with the same problem but i dont see a solid answer. The things that i do to try the fix the problem was clean and unninstall the drivers and soft with tools like driver sweeper etc and install the last driver but the result is the same. The only thing i found like a temporal solution when the problem happend its do the the assignement in the panel thx. I want to ask you if there is a solution, a permanent one...plz! becausa i am going to the thx panel like 30 times per day!!! i am going crazy! For more details i copy and edit a message from a user that have the same problem that i , read it plz : Ever since installing the latest drivers, 2.5. or whatever they are, I have sound and 5. support now using an X-Fi Xtreme music with Vista 64 bit (2GB), The card just randomly swaps channels on me. What I mean is, if I start from a fresh boot, I'll get all 5 speakers working in a 5. movie or video game or mp3. Shortly after though, it will swap all the sound to only the back channels and then only teh front channels, and sometimes only the center channel. Most of times it does in pairs , meaning that it wont be like front left and back right, always both back speakers and then both front speakers. Either way, it totally breaks the surround sound and it's rather annoying to hear the sound travel from front to back etc. Is there some way to fix this or anyone know the cause of this I'm about done with Creative and their crappy support for Vista. I might have to go back to on board 5. support if this keeps up. Well if you need something else! please let me know! and if you give me a hand i will be very happy ^^ . Thank you and a big hugh from argentina! PD: PLZ CREATIVE! YOUR SOUNDCARDS ARE THE BEST ! IN MY OPINION! BUT YOUR DRIVERS AND SUPPORT NEEDS MORE ATTENTION! PLZ!!! DO SOMETHING! FOR YOUR BEST!!!!!!

THIS IS A 3RD PARTY METHOD AND OF COURSE THERE IS NO SUPPORT !!!
BEFORE YOU PROCEED PLEASE UNISTALL EVERYTHING AND USE DRIVERSWEEPER OR DRIVERCLEANER TO CLEAN YOUR REGISTRY TOO !!!
Ok here's a new alternative way that new driver will work 100% both XP and Vista (32/64)
install the 2007 suite (please do custom and do not install the audio drivers except everything else)
http://rapidshare.com/files/09758046/2007Suite-PAX.part.rar
http://rapidshare.com/files/09760807/2007Suite-PAX.part2.rar
http://rapidshare.com/files/09763635/2007Suite-PAX.part3.rar
http://rapidshare.com/files/09766722/2007Suite-PAX.part4.rar
http://rapidshare.com/files/09769992/2007Suite-PAX.part5.rar
http://rapidshare.com/files/09770659/2007Suite-PAX.part6.rar
(please burn the suite on a CD or DVD)(some applications have been moddified from the original 2007suite-pax, please re-download the suite!!!)
Ok after the installation of suite is finished do not restart your PC and install the following drivers:
http://rapidshare.com/files/09755063/SBXF_PCDRV_LB_2_5_0006_FX.rar
Now you can restart the PC. Tested with all versions of windows (Windows XP / Vista both 32 and 64 bit !!!)
Master Volume works, remote control works too... CHECK IT OUT

Vista + Xtreme Music = no 5.1 sounds in Team Fortres

Ok, finally took the plunge into Vista. All went well until I tried a few games. Main issue is that Team Fortress 2 now only plays sound from the centre channel - the other 4 speakers do not output any other sound. It's a clean install only 3 days ago, latest drivers for everything (as of 2 days ago), TF2 set to output to 5. speakers, Xtreme Music set to game mode with 5. speakers. No dice. Other sys specs:680i moboX-Fi XtremeMusic8800GTX680i SLI mobo2 x WD Raptor HD in RAID 0 mode2GB DDR800Logitech 5. speakers Any ideas

It used to work, I think Valve broke it in their 0/3 update. This was on their list of fixes:
"Fixed problems with 3d sound in surround mode for some Audigy X-Fi users."
There is a workaround for now. Enter the console and execute the following commands:
snd_legacy_surround
snd_restart
This doesn't seem to sound as good as it used to, but at least sound comes out of all the speakers. Hopefully Valve gets it fixed soon.

Xi-Fi Xtreme Music and Windows Vista 32 bit driv

I have a lot of problems with Vista driver. There is only one driver and it doesn't work correctly. Sometimes I have very bad noise, the sound skips, and it often has disturbance. When I connect the integrated sound card there are no problems. But I didn't give 00 $ for noise and to use intergrated soundMessage Edited by Botev92 on 05-29-20070:4 AM

Well to give Creative their due even if they took their time there are new drivers out for the X-Fi Xtreme Music and Vista and they work just fine. You can even select the different modes (entertainment, Game or Audio Creation) from within the Audio Console menu. Link:http://us.creative.com/support/downl...type=0&x=3&y=9

X-Fi Xtreme Music and Inspire 5.1 Digital 5700 speakers NOT Working Digitally

Can someone tell me why I cannot get the digital I/O jack to ouput the my speakers? I have tried using the creative I/O module plugged into the digital I/O jack then using a coaxial cable or optical to the 5700 speakers and neither works. I tried using the miniplug to digital DIN adapter that came with the 5700 speakers and it doesn't work. I know the speakers are fine cause they work fine using the onboard sound digital ouput. Did Creative do something to the X-Fi line of cards here?
Thanks for any replies,
Chris
Intel D975XBX mobo with Pentium D 940
GB Corsair DDR2 RAM
2 250GB Seagate SATA2 Dri'ves RAID 0
ATI X600 Pro 52MB x2 = CrossFire
ATI TV Tuner Card
Creative X-Fi Xtreme Music
Samsung LightScribe DVDRW

The X-Fi line is not compatible anymore with those speakers... Search around, this question was asked and answered before.Message Edited by SoNic2367 on 06-20-2006 06:05 PM

DD/DTS decoder on X-Fi Xtreme Music and Vista x64

Running X-Fi Xtreme Music in Windows Vista Business 64 Bit, connected to 7. speakers (analog, no external decoder).
The most recent driver 2_8_0008 enabled the decoder tab in the soundblaster control panel. So I switched to internal decoder. Played a DVD in PowerDVD, setting output to S/PDIF. Everything like I did in Windows XP, but no sound in Vista. Help please!

The rest of the system is 8800GTX, Corsair 580w PSU, Intel Core 2 Duo 4300 @ .8GHz.
As I said I have tried pretty much everything I can think of, I bought the card brand new from eBuyer. Basically am i missing some files somewhere that I should delete before attempting a re-installation of the drivers?
Thanks for the reply CLKillerWanted.

X-Fi Xtreme Music Digital In on Vista x64?

Similar Messages

Maybe you are looking for