X-FI Xtreme Music not detected by Win

My Creative X-FI Xtreme Music is not detected by Windows XP with SP2.
what I have tried:
) connected the X-FI to each of the 3 PCI slots
2) installed latest nForce and VGA drivers
3) installed latest BIOS (version 04)
4) uncompressed the SB driver exe file and executed SBXF_PCDRV_LB_2_09_000\Src\Drivers\setup.exe directly
The soundcard works fine on a PC with an old ASUS A7V-266 motherboard! Why is that?
system specs:
ASUS A8N-SLI
athlon 64 3000+
evga 7600GT
RAM 52 MB

I had a similar problem that my ASUS A8N-VM CSM board didn't detect my X-FI card properly and the driver setup ended with a blue screen / reboot of my machine.
A lot of boards with NVidia chipsets of the 4series seems to have that problem.
With my ASUS A8N-VM CSM I found a solution: updated BIOS to beta version 002 and disabled the onboard IEEE394 (firewire) interface in the BIOS setup. After that I installed the X-FI without any further problems and it's now running very well.

Similar Messages

  • IPod Touch not detected in Win 7  HELP!!!!

    Windows 7 will not detect iPod Touch 64gb. Appears if no drivers are installed or the device is just not detected....HELP!!!

    Try reading this Apple troubleshooting document on this problem: http://support.apple.com/kb/TS1538

  • Pavilion dv4-1241tx wwan device not detected in win 7.Is there any wwan device at all?

    My pavilion dv4-1241tx can not detect wwan device when installing hp connection manager in windows 7.. pls help

    Some of the DV4-1000 series does support WWAN and some of them dont. Install drivers from here and check if WWAN module gets detected in Device Manager under Modems
    Also, Refer below link for more info
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01712976&lc=en&product=3769214#N62
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • I have an Xfi Xtreme Music (not audio), where are the drive

    I can't install any Vista drivers, except for older XP drivers.
    Where are the drivers for my sound card?

    chemistryman wrote:
    On the driver downlad page, select soundblaster in the first box, then X-fi in the second, and you should see the Xtreme Music in the list. I found it by accident.Scott
    No the driver were actually removed from the server yesterday. They are back today with a new release date (5march), but are actually the same drivers? Go figure?

  • Wireless Card (wifi) not detected in Win 8.1

    Hi,
    Since I bought HP Pavilion 17-e100ex Notebook (Win 8.1) have problem with the wifi adapter, sometime the wifi light turns on and sometime its not, and when i go to device manager it does not recognized that I have any kind of wifi adapter (when the wifi light is red on the F12 key).
    When I am lucky and does get to the wifi then i have got Ralink RT3290 802.11bgn driver, current version I have is 5.0.46.0 and date is: 09/04/2014
    I normally use network cable to connect internet.
    Can anyone help, how to fix this issue... if new driver needed please send me the direct link to the driver.
    Thanks
    Regards
    Saad

    this is my model:
    HP Pavilion 17-e100ex Notebook PC (ENERGY STAR)
    Model #: G1P43EA
    Serial #: [Personal Information Removed]

  • Sound blaster Xtreme Audio not detected by system

    I am running Windows xp? sp3. AMD Athlon 64 chip.
    My System wont detect the sb card, and won't install any drivers.
    Cant get the sb card configured at all.
    HELP PLEASE

    Is your source a DVD/ Blueray or Mp3 etc?
    It depends on your source, if your source is Stereo sound, you will need CMSS 3D to be turned on to upmix the sound into 5. channel.
    If your source is e.g a Blueray then it should be fine if you set your output settings under VLC or PowerDVD etc to play 5. sounds.
    Which case/scenario are you facing?

  • Xtreme music not recogni

    I've done everything to make this card work.
    Uninstalled all sound drivers. Used Drier cleaner. Used CCleaner. Cleared anything to do with Creative from everywhere. Disabled onboard sound in the bios. Restarted. Windows reports Multimedia Audio COntroller but does not recognise it as an X-fi. If I install the drivers when I try to start it it then tells me the device is not present. This is happening on both my Windows XP pro x86 (32bit) and XP Pro x64 (64bit). I've spent hours and hours trawling through forums and forums and posts and posts but I can't find a solution. Perhaps there isn't one?
    I'm running Xp pro and xp64 dual boot
    AMD64 3200
    Nvidia Geforce 7600gt
    Nforce 4 chipset on (oh nooooo) and here's the bios/chipset info:
    Program: eSupport.com BIOS Agent Version 3.6
    BIOS Date: 04/2/05
    BIOS Type: Phoenix - AwardBIOS v6.00PG
    BIOS ID: 04/2/2005-NF-CK804-6A6FB09C
    OEM Sign-On: NF4UL-A9 (NF4UA42 BF)
    Chipset: AMD 00 rev 0
    Superio: ITE 872F rev 7 found at port 2Eh
    OS: WinXP SP2
    CPU: AMD Athlon(tm) 64 Processor 3200+ 200 Mhz MAX: 3000 Mhz
    BIOS ROM In Socket: Yes
    BIOS ROM Size: 256K
    Memory Installed: 280 MB
    Memory Maximum: 6384 MB
    Memory Slot 0: 52 MB
    Memory Slot 02: 28 MB
    Memory Slot 03: 52 MB
    Memory Slot 04: 28 MB
    ACPI Revision: .0
    I've not updated the bios yet, I'm not sure about how to go about this - can't find anything that looks likely for my biostar mobo.
    Bascially, if anyone at all can help me with this I'd very much appreciate it. It looks like loads of people have had issues with this sort of thing. Can anyone help at all? I'm getting quite desperate (and fed up with this whole creative thing)

    OK BRILLIANT!
    I've just flashed the BIOS to the latest version - at a cost to both my wallet and my nerves (I can't really afford to trash my PC right now - when can I really?).
    Great advice there from creative. Now I get the multiple instances of "new hardware found" problem. So, rather than getting any better it now seems to be getting worse. It looks to me like this problem has been on the go for over a year now and so it's quite incredible that it hasn't been fixed - even more incredible that these cards are still being sold without any warning of what to expect.
    Is there anything at all that I can do? Obviously the bios update did nothing to help my situation. Will this card ever work? Can any one, anyone at all, help me with this?
    Please ....

  • X-Fi Extreme Music Not Detected At All By New

    I have just finished building a new PC with parts obtained from a friend, but the X-Fi that worked fine in my previous computer is now totally undetected. There is even no trace of it in the DMI data when the computer turns on - no 'Multimedia Controller' is listed under the PCI devices. It's the same story in Windows, there are no unrecognised devices at all. I have tried using it in both of the available PCI slots, and have had no luck. I know both slots work because my Wi-Fi card works in both of them. It worked briefly the first time I tested the system but after finishing the assembly of the computer it now?no longer works. SpecsFI Lanparty UT NF4 Ultra-D (Latest BIOS :smileytongue: )AMD Athlon 64 4000+2GB DDR400GeForce?6800 UltraX-Fi Extreme Music (OEM)Message Edited by Uke on 05-29-20072:45 AM
    Message Edited by Uke on 05-29-20072:45 AM

    I have excactly the same problem!
    I just myself a new computer with the following specc;
    Core 2 Duo E6600
    Asus P5N32-SLI SE Deluxe
    Leadtek Geforce 7950 Gx2 SLI gb
    Sounblaster X-fi Extreme Music
    Antec TruePower 2.0 TP2-550 EPS2V ATX2V 550W Power Supply
    (http://www.newegg.com/product/product.asp?item=N82E68703932)
    I installed the computer, everything went perfect, the soundcard installed without a problem, but no sound!
    I tried changing IRQ, Reinstalled, changed PCI slots, everything, and still! no sound. As the poster above, I tried the internal one, it it worked smooth so I have no idea what the problem is.

  • Zen Touch - not detected by Win

    Hello!
    I have a zen touch 40GB with the new firmware (the 2.xx). There is a problem with it. The player was working just fine for al ong time on this firmware, but couple of days ago WinXP stopped to recognize the device. What I mean is that it sees the player as an MTP device (ther is that small player icon in tray) but it doesnt show the player in explorer. This way I cannot access the players dri've, and do anythin with it. I've tried switching the usb ports, connecting it to my friends comp, cleaning up in recovery mode, but nothing works. Please help.

    nygerzzz,
    Check the device manager as SSR mention and see if it's detected properly. If there's nothing wrong with the detection at device manager then probably something went wrong with the permission setting in registry. You may want to check this Knowledgebase article SID0053 out and see if it hel
    ps.
    Jason

  • TS2776 I recently bought iPad 3 but iTunes on my Win XP laptop is not detecting the iPad and i am not able to transfer music to it.

    I recently bought iPad 3 but iTunes on my Win XP laptop is not detecting the iPad and i am not able to transfer music to it. I tried again after downloading iTunes 10.6.1.7 and it said it's not compatible with the XP version.

    I would recommend you try downloading iTunes for Windows 10.6.1 from this website for your XP based computer:
         http://www.techspot.com/downloads/70-apple-itunes-for-windows.html
    Hope this helps

  • Xtreme Music Vol. not staying

    Hi,
    I have an Xtreme Music soundcard and when I play games that I need a mic (with my headset) I need the microphone volume to be at about 60% but sometimes (I have yet to figure out what triggers it) it just goes back to 00% and makes my mic too loud. Is there anything to do?I have the latest drivers and?windows XP. Thanks

    I just ran DtectPCI with the X-Fi plugged in and it returned this:
    Bus 5 Slot? 2.0: 'Creative Labs' Dev 0x0005 Rev 0
    ? 0x0000? 02 05 00? 00 00 0 02? 00 00 0 04. 08 40 00 00
    ? 0x000? 0 EC 00 00? 04 00 80 FE? 00 00 00 00? 04 00 00 F8
    ? 0x0020? 00 00 00 00? 00 00 00 00? 00 00 00 00? FF FF FF FF
    ? 0x0030? 00 00 00 00? 40 00 00 00? 00 00 00 00? 0F 0 04 05
    ? Class? - Audio Multimedia Device
    ? Command? - Device not configured/enabled by BIOS !!
    ? Status? - PCI_STATUS_CAPABILITIES_LIST
    ? I/O Addr? - 0x0000EC00
    ? MEM Addr? - 0xFE800000 (locate in 64 bit address space)
    ? MEM Addr? - 0xF8000000 (locate in 64 bit address space)
    ? SubVendor - 0xFFFF
    ? SubSystem - 0xFFFF
    ? Interrupt - 0x0F / INTA
    Any idea why it says Not configured/enabled by BIOS?
    I think I'm going to try resetting CMOS.
    ----------- edit -----------
    Alright I cleared CMOS and now DtectPCI returns this:
    Bus 6 Slot? 2.0: 'Creative Labs' Dev 0x0005 Rev 0
    ? 0x0000? 02 05 00? 07 00 0 02? 00 00 0 04. 08 40 00 00
    ? 0x000? 0 EC 00 00? 04 00 80 FE? 00 00 00 00? 04 00 00 F8
    ? 0x0020? 00 00 00 00? 00 00 00 00? 00 00 00 00? FF FF FF FF
    ? 0x0030? 00 00 00 00? 40 00 00 00? 00 00 00 00? 0F 0 04 05
    ? Class? - Audio Multimedia Device
    ? Command? - PCI_ENABLE_IO_SPACE
    ? Command? - PCI_ENABLE_MEMORY_SPACE
    ? Command? - PCI_ENABLE_BUS_MASTER
    ? Status? - PCI_STATUS_CAPABILITIES_LIST
    ? I/O Addr? - 0x0000EC00
    ? MEM Addr? - 0xFE800000 (locate in 64 bit address space)
    ? MEM Addr? - 0xF8000000 (locate in 64 bit address space)
    ? SubVendor - 0xFFFF
    ? SubSystem - 0xFFFF
    ? Interrupt - 0x0F / INTA
    Still the driver install returns the "unable to detect" error.
    Going to try a few more things and post back here if I get anywhere...
    Message Edited by UtopiA on 05-0-2008 08:2 PM

  • My itunes will not start in Win XP. I get an error that says MSVCR80.dll can't be found. I am scared if I just reinstall iTunes that I will lose all my music and apps that are in the old itunes. What can I do.

    My iTunes will not start in Win XP. I am getting an error that says MSVCR80.dll can't be found. I am concerned that if I just do a reinstall
    of  iTunes it will overwrite or delete all the music and apps I have on the current app that won't start. When I boot the PC I get the following:
    APSDaemon.exe - unable to locate. MSVCR80.dll not found. Reinstalling application may fix this problem. How can I get iTunes started without losing
    all my music and apps? Thanks

    It won't unless a problem occurs. Back them up, uninstall iTunes and all related components, and reinstall them.
    (100013)

  • When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased music not on this iphone" it tells me "All of your a

    When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased > music > not on this iphone" it tells me "All of your available music has been downloaded to this device." However, my purchases are not yet downloaded to the iphone and not available to download. If I go to "purchased > music > all > recent purchases" it will show me the purchases that were most recent the last time I synced my phone, but not the purchases since then.
    Any thoughts on how I can remedy this and make all of my purchased music available on my phone without requiring syncing?
    iPhone 4

    So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
    Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
    Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

  • Ipod mini 2nd gen 1 gb: not detected by laptop (win 7 64 bit), if detected: error during autofill and cannot be restored, please help :D

    My laptop does not detect my ipod mini (2nd gen 1 gb), when i connect it the orange light flashe 2 or 3 times then nothing happens. if ever that it will be detected by my laptop and when i sync music on it there will be an error and itunes will suggest to restore it to its factory setting and if i choose to restore it error 3194 happens. so my top priority of course is for it to be detected then fix the latter. please help any will be much appreciated

    This is an Answer for a Possible Solution. It worked for me and is still working. The issue I was having with my 64 bit vista, was Apple Mobile Device Service was not being installed, I dont know why. But I disabled any active running program through MSCONFIG, to allow a clean uninterrupted install of ITUNES 8.02. This allowed AMDS and drives from ITUNES to install. Hope this works for most of you.
    APPLE, please review your Support Methods. Re-installing doesnt help an issue that resulted from installing.

  • Tecra Z50-A-11V: New SSD but Win 8.1 does not detect it

    We bought a Crucial M550 256GB disk and want to replace in a Toshiba Tecra Z50-Av1
    We do not want to make any transfer of data or cloned.
    We want to do a clean install with Windows 8.1
    The BIOS recognizes the SSD
    But when you install Windows 8.1 does not detect any disk connected to the unit and requested additional drivers. Windows not detect drive
    https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
    https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
    https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg
    i too test with lasted version of this driver (old F6 in boot to locate hdd driver)
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23496&lang=eng&wapk w=f6flpy-x64.zip
    and with toshiba package
    http://support.toshiba.com/support/viewContentDetail?contentId=4004211
    you can see than i have 3.20 version of BIOS. interestingly I see that the last one is the Toshiba has released version 3.1
    But always the drive CRUCIAL is not reconized by the boot instalation of windows
    The problem is similar with ubunto, kubuntu, .... the drive is detected with the BIOS but not for the OS.
    any help?
    Thanks

    Hi
    Did you solve this issue?
    Could you install the Windows 8.1 system on this SSD drive?
    I think the additional driver installation while setup procedure isnt necessary since Win 8.1 should already contain the essential drivers.
    From my point of few there could be an compatibility issue (maybe SSD firmware update would solve this).
    How about the usage of other SSD drives? Do you have the same problem using other SSD drives from other manufactures?
    Feedback would be appreciated.

Maybe you are looking for

  • Can Reader pick up the Default Page Size of a printer that is not the Windows Default Printer?

    We have a web based application that generates PDF documents via Crystal Reports. We are using Adobe Reader 8 The PDF pages are displayed within an Internet Explorer window where the the users then print the document. The application is designed so t

  • Search help in WDA

    Hi All, I tried implementing the F4 help for a parameter in the iview. The search help was standard one -> H_T508A. I bindded the context element having this search help option and automatic as the Input Help Mode. On testing the application, for hti

  • I need downlaod for my licensed Acrobat STandard 8 (Not Pro)

    I need download for my licensed Acrobat Standard 8 (Not Pro)

  • Receiving a run time error BCD_OVERFLOW

    Hello, While executing the Zprogram ...I am receiving a run time error. Got Runtime Error BCD_OVERFLOW When I analysed the issue in ST22....Type P Result is larger than one which is defined... Any suggestion would be appreciated ... Regards, Kittu

  • Spaceball 3D Controller Use in Acrobat 3D

    I was wondering if anyone has tried to use a spaceball to manipulate a 3D model in Acrobat 3D? I tried using my Spaceball 2003 with no success. As per the 3Dconnexion "ReadMe.txt" file I copied the "3DxAcrobat.api" file to the "Plug_Ins" sub-director