X-Fi XtremeGamer Fatal1ty Pro Series

$ I have X-Fi XtremeGamer Fatalty Pro Series and I can't get the proper drivers for Windows 64bit OS. I've downloaded the posted drivers but my system wont recognize it. Can anyone help?
Thankyou
Larry

Same issue. Windows 7 RC, just upgraded from 2 gigs to 4 gigs of RAM and my X-Fi Extreme Gamer Fatalty Pro, crackles, pops, hisses and can't even play audio files for more than 2 [email protected]

Similar Messages

  • Differences between XtremeGamer and XtremeGamer Fatal1ty PRO Seri

    I was looking at those two XFi cards and I would like to know if there's another difference appart from the X-RAM and the external connector.

    The 'plain' XtremeGamer flexijack has an optical spdif out instead of coaxial, it's not compatible with the I/O module and the jacks are not gold plated. EDIT: Here's an useful comparison chart:?[img"]http://dmzweb4.europe.creative.com/wwimages/audio_int/xfi/xfi_comparison.png">?[img"]http://dmzweb4.europe.creative.com/wwimages/audio_int/xfi/xfi_comparison_2.png">Message Edited by HSE on 03-22-200703:03 PM

  • X-Fi XtremeGamer Fatal1ty Pro Series - hardware DD and DTS decod

    Do I understand correct that hardware Dolby Digital and DTS decoding?is blocked in drivers for this card??Bundled PowerDVD 6.0 doesn't support Dolby Digital EX, DTS-ES and also Dolby Pro Logic IIx, DTS NEO:6... Sincerely yours,Pavel

    Actually, support is in the Creative Audio Console (which is part of the driver suite for all Creative sound cards), and is especially true for Windows Vista, as it has been since Windows 2000 Professional. Part of the problem with Windows Vista is that direct hardware access (even for audio) is headed off at the pass, and thus driver support (and application support) needs to be rewritten to realize that. PowerDVD is expecting an interface (that is no longer there).

  • X-Fi XtremeGamer Fatal1ty Pro Series Pin connections for panel in pc c

    Which pins do i need to use to connect up on the soundcard for the mic and speaker socket that is built in on my pc case to work ?
    So that i dont have to keep reaching around the back to unplug my speakers and plug in my headphones !
    If i have got the speakers already plugged in the back with a microphone, can i, will i be able to just plug the headphones in on the pc cases headphone port and the soundcard disable the speakers automatically ?
    Is the a diagram somewhere that shows the pin names or configurations ?
    Hope Someone can help
    Regards DeluDeD

    Hi,?What Creative does is hiding information that could be useful to their buyers in hope that buyers ruin their soundcards and run on to buy another, this is the only possible explanation to what they are doing. Just think this: ?Why in the hell they hide this information that could be so helpful and almost risk free and why do they charge a ridiculous price for the X-Fi I/O Dri've?
    In my Country (Portugal) a X-Fi ExtremeMusic Costs around 0.00? (around 88 dollars) and the I/O Dri've costs (in Creative?s Site) 04.5. (around 84 dollars), but if you buy the Sound Blaster? X-Fi Platinum (that has all the above and seems that the sound card is better) it only costs around 60? (around 28 dollars). So, if you buy the two first items in separate you?ll pay 24.5. (72.00 dollars) and pay more 54.5. (around 44 dollars) than if you had bought the Platinum.
    I really think that they should change the category from accessories to Deluxe Expensi've Options.
    The good news to Creative is that I wont buy anymore products from Creative, I?ve stopped to sell the speakers since they launched a series of Cambridge a few years ago with a subwoofer that sound ruined (I bought 30 of them) and never replaced them with a good one, now they do this and I say no more.
    Over the last 5 years in the Computer Assembly business I probably sold more that 3.000 products from Creative but my reaction to this attitude from Creative is the last that I can take. I?m not going to buy I/O Dri'ves to every PC that I sell with a Creative Sound Card!!!
    I?M BUYING PHILIPS NOW!!!!
    Good Luck Creative?

  • X-Fi XtremeGamer Fatal1ty Pro Series for Windows 7

    Does Creative have a plan for enabling their Vista drivers to install on Windows 7?
    If so, what is the project release date?
    The third party drivers do not work for me.

    Hi Chieftom,
    Did you try the beta drivers yet?

  • Problems with X-Fi XtremeGamer Fatal1ty Pro Series

    Hello All-
    Recently, my sound has really degraded. I get bursts of choppy audio, some time more persistent than others. If I am playing a game, it will actually cause skipping as if my machine was under heavy load. If I am watching a video, it will actually lag the video where the video is choppy or pauses briefly then catches up. Sometimes this happens when I first start a game or other media application, sometimes it persists where it is pulsing chop like a process is causing load on the applications. Sometimes, this persists as long as the application is open (winamp/pandora, various games, streaming video via winamp/real player, divx etc). I am on the most up to date drivers available through the creative support site (2.8.08 I believe).
    I have a 2.6ghz quad core, 4 gig RAM.
    Windows Vista x 64
    2 x Nvidia 8800 GXTs overclocked to 786m each
    Any help or recommendations would be greatly appreciated.

    I Join the club i have had this problem for ages my games will just freeze and then i get this crazy screetching noise i have never been able to fix the problem its creative all over for you crapy drivers i have had enough of creative and wont be bying one of their cards again try it in a different pci slot or try some different drivers if its still in warranty complain to creative get shirty with them and they might rma it if all else fails goods luck rich

  • Need help getting Fatal1ty Pro Series Gaming Headset Mic to work

    greetings.
    i am using a Fatal1ty Pro Series Gaming Headset Mic along with an Audigy 2 ZS Notebook card, and i cannot for the life of me get my laptop to recognize audio coming from the mic. the mic switch on the cord is on, and the status light is lit up, and i can even hear my voice from the mic in the headphones, but the audio is not being inputted into the computer. i'm using winxp pro and have played around with all the audio settings in control panel with no luck. any suggestions? i thank you in advance for your time and consideration. take care.
    regards,
    jps

    Headsets or microphones with a USB connection cannot be connected to the input connections on a sound card directly. Instead, they must be connected to a USB port on a PC.
    They are treated as a separate audio device by Windows. They will be listed as a separate audio device in Device Manager as well as in Windows Multimedia panel. To adjust the volume of the headset or the microphone, use Windows Volume Control.

  • X-Fi XtremeGamer Fatality Pro Series & WIN 7 - help !

    As mentioned in the subject of this post, I have a Fatality Pro Series Xfi Xgamer PCI card. Everything seems to be working fine in WIN7-64bit except..... I cannot seem to locate a version of the THX Console Launcher. Granted, there isn't much I cannot set through the Audio Control Panel that came with the driver pack but I cannot seem to find any way to get to the equalizer settings that you would normally be able to set thru the THX control panel.
    I have been tempted to just download the vista64 version of it but I am not sure if that would work or not,
    OH and I am also looking for a WIN7-64 compatible version of the Alchemy application for re-enabling EAX support in older games.
    Any ideas, suggestions, links to downloads?
    Message Edited by toddh on 05-29-2009 06:8 AM

    = Use this,
    ?http://forums.creative.com/creativel...&thread.id=425

  • SB X-Fi Xtremegamer Fatal1ty Pro and Windows 7 problem

    6SB X-Fi Xtremegamer Fatalty Pro and Windows 7 problem7Hi,
    I have SB X-Fi Xtremegamer Fatalty Pro? sound card on my pc and after updating on windows 7 Unltimate my card doesnt work... i tryed every posible driver according this issue and nothing happens.. i got 2 errors .) on Volume panel i have this messege " There are no supported audio device available. You need to close the application. Click OK to close the applcation now. " and on Computer manangement an error on Creative X-Fi audio Processor (WDM),?
    I check the drivers and is SB0460?. on the site it say Xtreme music but the code is the same with my card.. i used this drivers and nothing. i also used auto update and nothing again..
    Please any help because i dont know what to do any more..
    My best regards

    Did you try using an independent driver such as robertmc8's PAX driver or Daniel K.'s drivers? I have an old PCI-based Xtremegamer Fatalty Pro with Windows 7 64 bit and I am using PAX drivers. No problems here.

  • Connect SPDIF X-Fi Titanium Fatal1ty Pro Series ?

    Hello,
    I have a problem with a cable connection to SPDIF X-Fi Titanium Fatalty Pro Series.
    I can not find where the entrance of the cable in the back and threw the manuals that I received while shopping.
    If someone could give me a picture of a location to link SPDIF cable
    Sound card. I have a cable SPDIF 2 accesses the video card.
    I'll thank you for your help.

    some how that thing its not working out for me.
    if you havent know what i am looking after :
    the spdif pins of the audio card http:// forums.creative.com/t5/Sound-Blaster/Connect-SPDIF-X-Fi-Titanium-Fatalty-Pro-Series/m-p/567247#M5878 X-Fi Titanium Fatalty Pro Series.

  • Using back SPDIF Motherboards outputs with X-Fi Titanium Fatal1ty Pro Series

    I have an Asus Rampage Formula that comes with Digital Coaxial and Toslink outputs and a PCI-E sound card, Supreme FX II.
    I was able to use both back SPDIF outputs with out any cable, you the card in the PCI-E slot, but I have change my card with a X-Fi Titanium Fatalty Pro Series, no im not able to use any of those outlets, im used the the Coax to my Home theater and the Toslink to me headphones.
    Now I can only use the Toslink of the digital output of the X-Fi with my headphones but im not able to use the ports of the mobo to my home theater, is there a way I can use them? the card doesnt have a Coaxial output and thats the problem.
    Also, my mobo has 4 pin SPDIF output port, so you can connect something there, but it seems that there are any cable from the output port of the mobo to the audio card....
    I found this but Im thinking it might not work...
    http://cgi.ebay.com/ASUS-COMPUTER-MB-ACCESSORY-SPDIF-OUT-COA-OPT-4pin-SPDIF_W0QQitemZ3504993780QQcmdZViewItemQQptZLH_Def aultDomain_0?hash=item3504993780&_trksid=p3286.c0. m4&_trkparms=72%3A234%7C66%3A2%7C65%3A2%7C39%3A%7C 240%3A38%7C30%3A%7C293%3A%7C294%3A50?
    Any help will be really appreciated!
    Thank You!?

    Any [email protected]

  • No MediaSource Go! with X-Fi Titanium Fatal1ty Pro Series?

    I recently picked up a new X-Fi Titanium Fatalty Pro Series card; which replaced my older X-Fi Platinum, that sadly stopped working.
    Anyway I noticed that, this newer Titanium card came with a newer version of the Creative MediaSource software; called MediaSource 5.
    However, it does not include the launching application, MediaSource Go! which is the launcher bar that loads on startup. With my X-Fi Plat, when I hover my mouse over the top edge of my screen the MediaSource Go! launcher bar drops into view and I can just click on the icon of any Creative application that I have on that bar, to launch that application.
    I liked that very much.
    So I am curious, why is this not included with the newer MediaSource that comes with the X-Fi Titanium Fatalty Pro? I would very much love to have it!

    @. Re: No MediaSource Go! with X-Fi Titanium Fatalty Pro Series? I have a similar issue. I am having a problem with speaker calibration which strated several months ago after updating some Creative files. Today I uninstalled all Creative apps and driver pack and reinstalled the latest versions. Doing this I lost my Mediasource Go! bar. So I downloaded it and when I tried to install it I got a message saying? I did not have the "minimum" version of MediaSource and that it would now quit. However, when I had Go! before I also had Mediasource5; in fact the Start Menu shortcut for Go! (which is now a broken link since Go was removed) showed it was in the Mediasource5 directory. So why won't Mediasource Go! install with Mediasource5 installed? I thought the "minimum" version of Mediasource required for Go! was 3.00.6.

  • HDMI connection through PCI Express X-Fi Titanium Fatal1ty Pro Series and Nvidia GTX 2951

    Hello,
    I want to connect HDMI connection through PCI Express X-Fi Titanium Fatalty Pro Series and Nvidia GTX 295\but i cant tell which of the pins on the Audio Card is the Spdif.

    CRe: Mic not working (PCI Express X-Fi Titanium Fatalty Pro Series)? Hello,
    Thanks for the reply.
    The headset is connected via the 3.5mm jacks in the card.
    I believe I have it working now. I ended up having to unstall the drivers and software, reboot, install drivers and software and then mess with the settings. The only issues that I am having now is that I hear a a really high sort of feedback/hiss tone from the headphones now. To correct this I have to turn the input for the microphone down really low within the Windows 7 controls for the microphone and turn it up with Ventrilo to get the mic to work and remove the feedback/hiss.
    I believe that the issue stems from the flexjack setting. The whole flexjack thing really seems to mess with the microphone settings. I believe I choose line-in instead of microphone.
    Once I get home tonight from work, I will hopefully post the exact settings I came up with to get the mic to work.

  • Problem X-Fi Xtreme Gamer Fatal1ty Pro Series Code 10 or 12 error

    AProblem X-Fi Xtreme Gamer Fatalty Pro Series Code 0 or 2 error8 Over the past 0 days i've been trying to get this Sound Blaster X-Fi Fatalty ?Card working on my new computer but it seems the?card just doesent want to start work or be detected somehow!
    It works on 3 other computers <span class="small">(my friends and my old one wich is a p4 2.4 with a? asrock mobo) and the best i managed it to do was the sound card being installed working for a reboot or 2 and then just start to hiss and then i shutdown the computer and the device manager tells me again that the device could not start etc etc etc... code 0 error blah blah
    I have onboard sound disabled (in BIOS), tried every OS there is (XP sp sp2 sp3, Vista 32 sp Vista 64 sp Win7 32 Win7) coupled with every pack of drivers (creative site and non creative site)?there is and fresh installs of OS from xp to vista and win7 with no use.
    If someone here can be of some help i would be very gratefull!
    The card is a Creative X-Fi Xtreme Gamer Fatalty pro
    Btw: the pc is a core i7 with a Gigabyte X58-UD4 6g ram currently with vista 64

    E Anyone get to the bottom of this I keep getting the card recognised as a multimedia audio controller in Vista 64.
    Nothing I do will get this to work, when I force it to use the driver from the disc/internet or non-creative drivers this device just states could not start code 0.
    The card works in my other machine vista 32 bit.

  • Problems regarding my Creative Fatal1ty Pro Series Gaming Headset

    Hello Creative
    I have had this headset for a while now - and I'm pretty satisfied.
    After 2-3 hours of use, my mic as well as sound makes a weird noisy sound - so I can't hear anything and speak to anyone because it's so noisy - like it's the movie introduction man+alot of noise speaking, sometimes it even sounds like an airplane is taking off.
    To make it stop, I have to unplug and replug the usb cable again.
    I've tried on several computers, with same result - unfortunately.
    Have you heard about this problem before, and is there any solution?
    Dear regards
    Rune

    I have the HS-200, and that happens for me, about once a month after 00's of hours of use. When it does, I do a hard reset of the microphone using a paperclip and that gets it working again.
    Although the first year I had it, I had no problems. This has been a new issue that started recently.

Maybe you are looking for

  • Error when starting a SWITCH branch (8987)

    Hi, I am testing my workflow which starting with a multiple condition (switch). The workflow process is stopped with the error: Error when starting a SWITCH branch (8987). The workflow check shows no warnings or errors. What could be the problem? Tha

  • Data provider problem in custom item renderer

    I have a complex, custom item renderer for a list. I add items that I extracted from an xml to the data provider using the IList interface. But when displaying the list, the items are all screwed up. Each rendered item has some parts which are initia

  • How can i find and delete duplicate emails on my mac

    I use Apple Mail, Gmail and a third party email on my few Apple devices (iMac and Macbook Air both running Mavericks and iPhone 4s running current version iOS).  I would like to sort through, locate and delete duplicate emails (from several misguided

  • Need to understand when  redo log files content  is wrote to datafiles

    Hi all I have a question about the time when redo log files are wrote to the datafiles supposing that the database is in NOARCHIVELOG mode, and all redo log files are filled, the official oracle database documentation says that: *a filled redo log fi

  • I don't see an itunes store menu on new version of itunes

    So itunes won't let me rent a movie because it says I haven't authorized my computer. It says to do so I have to go to the store menu, and hit "authorize" but I don't see the store menu anywhere on this new version of itunes.  Please Help.