X-Fi Xtrememusic Driver installation hangs

Hello to everyone who had the intrest in taking a look at my thread,
Four years have passed now since the day I left my last replay on Creative Support forums, back then I was interested in acquiring a sound card that would support EAX HD (v4.0). I did acquire a crad with EAX 4.0, a Creative Xtreme Music (bought it about a year ago) to be precise.
Setting the card into my pc and installing the official 2.8.003 driver package, worked out great for a year of time.
Two days ago I turned my PC on and to my supprise, the only available working device in my Volume Mixer was the "S/PDIF Out (Creative SB X-Fi)".
I set windows into restore mode and restored my pc to the state it was two days earlier. That didn't help. I removed all creative entries from "Uninstall software" (In control panel). I rebooted the system ran Driver Sweeper, cleaned the registry from any creative entries, with each step of the way a reboot was performed. No entries of Creative where left in the system.
When all entries have been removed out of the system (I followed every possible guide on the net about removing Creative stuff from the system), an extra reboot was done after which I went into control panel, device manager. I found my Creative X-Fi under "Other Devices" under the name of "Multimedia Audio Controller". I updated the driver with the official 2.8.003 that I have kept on my dri've from the first time I installed the drivers a year ago.
Windows would find the appropriate driver, but would be unable to install my device due to "Invalid Data".
Googled that, only to find that non of the proposed working solutions (which are about the same, uninstall, remove, delete, clean install daniel_k drivers) would work out for me.
I got pissed, I set a whole day backing up my data from the main dri've and did a format to it. I freshly installed Windows 7 Ulti 64Bit. I tried installing the card from the official CD, which at a certain point would just freeze the whole system.
I rebooted and restored Windows, tried to install the drivers from the CD once more, with no success, the system would hang again when trying to install the drivers for my card, reboot, restore and into safe mode. In safe mode, I went directly into device manager, updated my drivers for my card (J:\Audio\Drivers\) the system found the X-Fi driver, it installed it and then I rebooted into normal mode.
The speaker no longer had the red cross icon on it, but no sound was coming out of my headphones. I unplugged them and replugged them, at no help, I clicked on the Volume mixer.... I had only "S/PDIF Out".
What is going on with my card, what went wrong with the card
Thanks for the help
P.S.
In my current system I have two hard dri'ves(each split into multiple partitions, I run win 7 on my ST000 and my Win XP on my ST60), after I lost my sound the first time, I booted into my 60 dri've, I ran Winamp and pressed on play. For some reason the sound played for a second or two and then faded away (died), I tried playing anything else after, but there was no sound at all, I rebooted into XP again, this time the system had no sound at all.
Has my XtremeMusic card just died two days ago

?It has been a day that my thread has been hanging in the air and still, not a single replay has been posted.
One would think that four years would be enough for a company to realize that it is time to wake up, sadly reality shows otherwise.
I have fixed my issue, anyone interested in knowing what I did to fix my problem, private me. I am not going to post it here, the people that know something about tech should of already figured this one out. I let them do their job.
P.S.
This thread, in particularly, must be considered as a Sticky. The solution to my problem, has not been yet resolved be other folks that had the same exact problem, as the cause to the problem is something that DOES NOT exist in Creative's knowledge data base and in the forums.

Similar Messages

  • Bootcamp, intel mac pro, using entire drive, installer hangs- what am I doi

    I have been trying to install boot camp and windows on my Mac Pro. Installing on my MacBook Pro was so easy I didn't expect any kind of problems, but I got them anyway.
    a) I am installing on a hard drive and I expect to use the entire drive. I start boot camp and designate the drive. Windows appears to start installing but when I get the format screen, there is no partition on any drive labelled Boot Camp.
    b) if I choose the drive I wanted anyway, it will format for NTFS and copy all the files. It will re-boot and start the GUI install but hang with 33 minutes to go. I have tried this multiple times and the result is identical every time.
    What am I doing wrong?

    As of this point in time, I have been able to get windows installed- I noticed during the windows setup and format section that the disk actually had two partitions, one very small and the other the size of the rest of the disk.
    (this was probably a mistake) but I deleted the small partition, formatted the large one NTFS and continued with the install. Well, windows went on without a whimper after that and I was able to install the windows drivers from my apple disk.
    BUT when i go to preferences/startup disk to select the BOOTCAMP partition (yes, that shows now) I don't see it.
    If I start Fusion, I can see and boot the bootcamp partition but if I go into the control panel and start the bootcamp control, the mac os partition does not show.
    So, does it sound as though I deleted what apple uses to select between the mac os and windows installations when i deleted that small partition?
    I am afraid to try again.

  • OCE WPD driver installation hangs on client workstation

    Hi,
    We are having issues with a specific driver from OCE. The driver is WPD for an OCE PlotWave 300 on Win7x64. We cannot use another driver since the clients need it for AutoCAD documents. I have been able to add the driver to the driver store without any issues but the problem happens when a client tries to install the Printer Agent. The error we get is "PA failed to install :The Remote Procedure call failed". The installation fails and makes the iPrint client and the windows spooler crash every time. We are currently using iPrint client v5.98 but we also tried v5.99 without any luck. We have been able to install the printer manually on the workstation but from iPrint, it fails each time. Like I said, this issue only happens on Windows 7 64bit workstations.
    Any ideas would help!
    Thank you!

    Originally Posted by MathieuI
    Hi,
    We are having issues with a specific driver from OCE. The driver is WPD for an OCE PlotWave 300 on Win7x64. We cannot use another driver since the clients need it for AutoCAD documents. I have been able to add the driver to the driver store without any issues but the problem happens when a client tries to install the Printer Agent. The error we get is "PA failed to install :The Remote Procedure call failed". The installation fails and makes the iPrint client and the windows spooler crash every time. We are currently using iPrint client v5.98 but we also tried v5.99 without any luck. We have been able to install the printer manually on the workstation but from iPrint, it fails each time. Like I said, this issue only happens on Windows 7 64bit workstations.
    Any ideas would help!
    Thank you!
    Are you using the "shortinstallname" feature: https://www.novell.com/support/kb/doc.php?id=7003076 ?
    THomas

  • Windows 7 installation hangs on 'completing installation' in boot camp

    hi
    i am trying to install windows 7 ultimate 32 bit using boot camp and each time i have tried (except on one occasion) the installation has hanged on the 'completing installation' stage. i initially had this problem, then one time it worked, but then i had to wipe my boot camp partition and start again, and since then no joy in installing windows 7 again.
    when the installation hangs it sounds like the install DVD is making a whirring sound as though there is an issue reading the DVD. but i have tried two different windows 7 install DVDs in both drives on my Mac Pro and i keep getting the same problem.
    i have tried installing without any peripherals plugged in, including my cinema display, but still no joy, except for that one occasion, when i am not aware of having done anything different.
    the boot camp partition is 32GB, and i have the same issue whether starting the installation using the boot camp assistant, or just booting from the Windows DVD and formatting the boot camp partition during the install.
    can anyone help me troubleshoot this?
    thanks
    nick

    On a Mac Pro with four hard disks, you would be better off devoting an entire HDD to Windows. You do not even need to start the Boot Camp Assistant application.
    However, that does not appear to be the problem. Perhaps the size of your Windows partition is a bit on the smallish side. Why so small? Have you tried a larger partition? Going larger would be a good experiment to help drill down to the installation problem.
    Try to eliminate anything under your control that could be part of the problem.
    At 32GB that's the borderline between being permitted to use FAT32 formatting and being required to employ NTFS. Presumably, you allowed the installer to use NTFS. In fact I think Win7 requires NTFS. Switch the partition size a little down or a little up to eliminate that as a possible glitch point. Just a thought and probably a stupid one but you never know...
    An afterthought: Can you get hold of a FireWire DVD optical drive. Maybe the internal drive is faulty.

  • ATI Xpress 1250 Catalyst 9.3 Driver installation problem

    I have an ATI Xpress 1250 Radeon integrated graphics card on my laptop.
    The v9.4 drivers from the AUR crash my X and hangs with no keyboard/mouse interaction.
    The ATI driver website said the card required the 9.3 drivers which when installing gave this error:
    http://support.amd.com/us/gpudownload/l … ng=English
    [08:54][utils]$ sudo sh ati
    ati-driver-installer-9-3-x86.x86_64.run  atidriver/                               
    [08:54][utils]$ sudo sh ati-driver-installer-9-3-x86.x86_64.run
    Created directory fglrx-install.wdkccU
    Verifying archive integrity... All good.
    Uncompressing ATI Proprietary Linux Driver-8.593...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
    ==================================================
    ATI Technologies Linux Driver Installer/Packager
    ==================================================
    which: no XFree86 in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/perlbin/site:/usr/bin/perlbin/vendor:/usr/bin/perlbin/core:/home/chillu/bin/:/home/chillu/bin/)
    Error: ./default_policy.sh does not support version
    default:v2:i686:lib::none:2.6.29-ARCH; make sure that the version is being
    correctly set by --iscurrentdistro
    Removing temporary directory: fglrx-install.wdkccU
    Help!

    tealson wrote:
    I'm not quite sure, but the ATI Xpress 1250 may have been dropped from the driver support list. AMD/ATI changed a few things there back one month or so.
    Apart from this you should not try the driver from amd but test this one from aur:  http://aur.archlinux.org/packages.php?ID=25105
    Thank you!!
    That was exactly what I wanted to know!
    I was using the catalyst 9.4 drivers in the AUR and was searching for the legacy drivers from the AUR.
    Thanks again! Will try and post the results.

  • Windows Vista Installation Hangs on "Completing Installation" on Dell Inspiron 1720

    I have a Dell Inspiron 1720 that I am working on. The original problem with this computer was that it was accidently shut off during a Windows Update. The computer will only load to a black screen with a white movable cursor. 
    Unable to resolve that issue, I decided to purchase a replacement hard drive (WD Scorpio Black 320GB -- Model # WD3200KTRTL) and proceed to do a full install of Windows Vista using the Dell Reinstallation Window Vista Home Premium 32BIT disc that came with
    the computer. 
    Towards the very end of the installation, the system hangs on the "Completing Installation" section. I decided to leave the computer turned on over night just in case there were things that were still loading. This was not the case and the next morning I
    turned off the computer.
    With the new hard drive installed and with Windows Vista installed (minus the "Completing Installation hanging...) I am faced with the same problem as before when I had the existing hard drive installed. 
    Can anyone help me solve this issue? Ideally, I'd like to use the existing hard drive instead of the new one, simply because there is a lot of data and problems on the other drive. 

    How could it be that I can't reinstall Vista after replacing the hard drive in my Inspiron 1720 when I have the original DVD from Dell, to be used for just that purpose?  Well, the answer was exactly what Jaco suggested.  After hours of struggling
    with this, and about at the stage where a new computer made more sense that continuing to try to get this 6 year old one running again, changing the AHCI setting allowed the Vista installer to get over it's CRCDISK.SYS hangup.  A 30 second fix, but finding
    it took hours.  Sigh...Thank you for posting this, Jaco.

  • PC Suite Installation hangs - any new tricks?

    Hi all,
    I've been trying to install PC suite on my computer but without any results. My operating system is 32bit Vista and I've tried to install 6.84.10.3 & 6.85.12.0 versions of PC suite.
    6.84.10.3 hangs 61%/20% and 6.85.12.0 hangs on 40%. I think that it has something to do with Cable Connectivity Driver installation but haven't figured out the problem...
    I've also tried solutions mentioned in other topics in this forum, installing without internet connection, killing the setupt.exe during installation etc. The computer is not running Roxio roxwatch.exe.
    Can't clean up the computer by using Nokia PC suite cleaner because it doesn't support Vista....etc. Any help would be appreciated, I think my multimedia phone is quite useless without PC suite.

    Hi all, solution found:
    After some research I came up with the following detour to get the PC suite installed and work: From the register editor I found that windows makes an installation folder to: Crogramdata\Installations\(then a folder which is named by a code)\(subfolders) (Programdata is hidden folder)
    The subfolders contain all the packages from which the normal PC suite installer installs the different parts of the program. There were CCD, PCCS, Nokia_PC_suite and VC80_x86 folders. All those folders included setup subfolders which contained installer-files. I simply installed all those parts separately with their own installers and everything works OK! First I installed CCD (Cable Connectivity Driver) then the PCCS (PC Connectivity Suite) and finally I installed Nokia PC Suite.
    PCCS has to be installed before Nokia PC suite program itself.
    Installation was succesfull and there were no errors during it. I also tried to install the VC80_x86 but nothing happened... Does any one know what is it? But so far so good, PC suite works.
    I guess the main installer is not working and is the cause for hanging the whole installation.
    Hopefully this was helpful if someone has encountered same kind of problems.

  • Installation hangs / Cable Drivers

    Hi ,
    i just cannot install the PC-Suite 6.83. Every time i start the installer it hangs at 65% / 21% when it says its installing the "Nokia Connectivity Cable Driver".
    I already tried to install the Cable Driver - but that installation hangs too. There is a file called "setupext.exe" which seems to cause the problem.
    Does anyone can help me ?
    regards

    No dice here also.
    Installation hangs at either 7, 79 or so % of "Nokia connectivity cable driver".
    Can't pass over it. An installation starts in the background, but never finishes, I left it like 2 hours there. I also tried killing it (complains a part of the setup never ended gracefully and aborts).
    Installing NCCD by itself doesn't help. Nothing else I could think of worked. I'm puzzled.
    Another thing is, it works at work (XP), but hangs here (2k SP4) - on a side note, the work version says no updates are available. This version just hangs checking for updates until I stop it. Odd thing is, I'm optical fibered in both locations, I'm 17 ms away from Nokia.com and over a 3 MB dedicated connection. I have a 10 MB dedicated OF link at work.
    How can it not work? The Setup hogs the CPU for like 5 secs, then cools down and just sits there.
    Can't I just pass a /nocable to it or something? Just pass the NCCD, I can do that myself. Or afterwards. Or something.
    I have no Roxio or any other similar products, like an AV program. Clues?

  • 11gr2 client installation hangs during client installation

    hi
    11gr2 client installation hangs during client installation during "perform pre-requisit test"-- what to do??
    server oel 5.6
    db 11gr2
    client 11gr2
    os win xp prof 32 bit
    java jre 6u24
    netbeans 6.9.1
    kind regards
    Edited by: SYSAPPSDBATSM(EBZ11,R12)1152046c on Mar 25, 2011 3:40 PM

    hi
    INFO: Completed validating state <init>
    INFO: Verifying route success
    INFO: Get view named [InstallTypesUI]
    INFO: size estimation for InstantClientinstall is 174.04894161224365
    INFO: size estimation for Administratorinstall is 1046.229476928711
    INFO: size estimation for Runtimeinstall is 754.2802858352661
    INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@1cf243b
    INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
    INFO: InstallTypesPane installType is: InstantClient
    INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
    INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
    INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
    INFO: Loading view <InstallTypesUI> at state <clientInstallType>
    INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
    INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
    INFO: size estimation for InstantClientinstall is 174.04894161224365
    INFO: size estimation for Administratorinstall is 1046.229476928711
    INFO: size estimation for Runtimeinstall is 754.2802858352661
    INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state clientInstallType
    INFO: Completed executing action at state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Client Install Type set in InstallTypeUI is : Custom
    INFO: Validating view at state <clientInstallType>
    INFO: Completed validating view at state <clientInstallType>
    INFO: Validating state <clientInstallType>
    WARNING: Validation disabled for the state clientInstallType
    INFO: Completed validating state <clientInstallType>
    INFO: In Transition of InstallTypesAction:
    INFO: Verifying route ic_no
    INFO: Get view named [ProductLanguageUI]
    INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@a16157
    INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
    INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
    INFO: Fetching Available Languages...
    INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
    INFO: Loading view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
    INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state productLanguage
    INFO: Waiting for completion all forked tasks at state productLanguage
    INFO: All forked task are completed at state productLanguage
    INFO: Completed background operations
    INFO: Executing action at state productLanguage
    INFO: Completed executing action at state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: The languages in which the product will be installed are [en]
    INFO: Validating view at state <productLanguage>
    INFO: Completed validating view at state <productLanguage>
    INFO: Validating state <productLanguage>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
    INFO: Completed validating state <productLanguage>
    INFO: Verifying route productlanguage_yes
    INFO: Get view named [InstallLocationUI]
    WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
    WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
    INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@ba8fce
    INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
    INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
    INFO: Loading view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
    INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state getOracleHome
    INFO: Completed executing action at state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: Validating view at state <getOracleHome>
    INFO: Completed validating view at state <getOracleHome>
    INFO: Validating state <getOracleHome>
    INFO: custom prereq file name: oracle.client_Custom.xml
    INFO: refDataFile: C:\Documents and Settings\DBA\Desktop\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: InstallAreaControl exists: true
    INFO: isNewHome= true isORCAHome=false
    INFO: Checking:NEW_HOME
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:ORCA_HOME
    INFO: Reading shiphome metadata from C:\Documents and Settings\DBA\Desktop\win32_11gR2_client\client\install\..\stage\shiphomeproperties.xml
    INFO: Loading beanstore from file:/C:/Documents and Settings/DBA/Desktop/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
    INFO: Translating external format into raw format
    INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/Documents and Settings/DBA/Desktop/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: size estimation for Administratorinstall is 1046.229476928711
    INFO: PATH has :==>C:\DOCUME~1\DBA\LOCALS~1\Temp\OraInstall2011-03-26_10-46-45AM\jdk\jre\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Common Files\NetSarang;C:\Program Files\PC Connectivity Solution\;C:\app\DBA\product\11.1.0\db_2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\WinSCP\;C:\Program Files\QuickTime\QTSystem\
    INFO: Completed validating state <getOracleHome>
    INFO: InstallLocationAction to INVENTORY_YES_CUSTOM_YES
    INFO: Verifying route INVENTORY_YES_CUSTOM_YES
    INFO: Get view named [CustomInstallUI]
    INFO: Re-loading component config bean
    INFO: Loading beanstore from jar:file:/C:/Documents%20and%20Settings/DBA/Local%20Settings/Temp/OraInstall2011-03-26_10-46-45AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
    INFO: Translating external format into raw format
    INFO: Restoring class oracle.install.commons.base.util.ComponentConfig from jar:file:/C:/Documents%20and%20Settings/DBA/Local%20Settings/Temp/OraInstall2011-03-26_10-46-45AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    INFO: Resolving dependencies
    INFO: View for [CustomInstallUI] is oracle.install.ivw.client.view.CustomInstallGUI@1473a2e
    INFO: Initializing view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Completed initializing view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Displaying view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Completed displaying view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Loading view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Completed loading view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Localizing view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Completed localizing view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state clientCustomInstall
    INFO: Completed executing action at state <clientCustomInstall>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <clientCustomInstall>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Client Custom Install Selection.  map = {}
    INFO: Validating view at state <clientCustomInstall>
    INFO: Completed validating view at state <clientCustomInstall>
    INFO: Validating state <clientCustomInstall>
    INFO: Completed validating state <clientCustomInstall>
    INFO: Verifying route TO_ENDCUSTOM
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state prereqExecutionDecider
    INFO: Completed executing action at state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <prereqExecutionDecider>
    INFO: Completed validating view at state <prereqExecutionDecider>
    INFO: Validating state <prereqExecutionDecider>
    WARNING: Validation disabled for the state prereqExecutionDecider
    INFO: Completed validating state <prereqExecutionDecider>
    INFO: Verifying route executeprereqs
    INFO: Get view named [PrereqUI]
    INFO: View for [PrereqUI] is [email protected]77
    INFO: Initializing view <PrereqUI> at state <checkPrereqs>
    INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
    INFO: Displaying view <PrereqUI> at state <checkPrereqs>
    INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
    INFO: Loading view <PrereqUI> at state <checkPrereqs>
    INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
    INFO: Localizing view <PrereqUI> at state <checkPrereqs>
    INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state checkPrereqs
    INFO: custom prereq file name: oracle.client_Custom.xml
    INFO: refDataFile: C:\Documents and Settings\DBA\Desktop\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: Completed executing action at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state checkPrereqs
    INFO: Waiting for completion all forked tasks at state checkPrereqs
    INFO: Creating PrereqChecker Job for leaf task Physical Memory
    INFO: Creating CompositePrereqChecker Job for container task Free Space
    INFO: Creating PrereqChecker Job for leaf task Free Space: dba-077754d77ea:C:\DOCUME~1\DBA\LOCALS~1\Temp
    INFO: Creating PrereqChecker Job for leaf task Architecture
    INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
    INFO: CVU tracingEnabled = false
    INFO: Nodes are prepared for verification.
    INFO: *********************************************
    INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:dba-077754d77ea
    INFO: Expected Value:128MB (131072.0KB)
    INFO: Actual Value:1.9906GB (2087276.0KB)
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Free Space: dba-077754d77ea:C:\DOCUME~1\DBA\LOCALS~1\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:dba-077754d77ea
    INFO: Expected Value:130MB
    INFO: Actual Value:12.5322GB
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:dba-077754d77ea
    INFO: Expected Value:32-bit
    INFO: Actual Value:32-bit
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:dba-077754d77ea
    INFO: Expected Value:1023
    INFO: Actual Value:235
    INFO: -----------------------------------------------
    INFO: All forked task are completed at state checkPrereqs
    INFO: Completed background operations
    INFO: Moved to state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <checkPrereqs>
    INFO: Completed validating view at state <checkPrereqs>
    INFO: Validating state <checkPrereqs>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
    INFO: Completed validating state <checkPrereqs>
    INFO: Verifying route success
    INFO: Get view named [SummaryUI]kind regards

  • Windows Media Player Installer Hangs

    When I try to install Windows Media Player on my 12" PowerBook, the installer hangs and I have to hard reboot the machine. I have gone through 3 rounds of this and tried both the installer bundled with Office 2004 and a freshly downloaded copy.
    The PowerBooks is well maintained - regular cron and permissions repairs. Checked permissions after each attempt - all clean.

    Kits is very nice. Our condo is in UBC which is only a few minutes from Kits. Too bad it won't be summer because there's lots of action on Kits Beach. Some good restaurants, too. If you like Thai try Montri's. For Malaysian there's Banana Leaf. Maurya's is the best for Indian. For upscale Italian try Quattro's on Fourth. Bishop's is one of Vancouver's premier places. For the best in French dining it's The Crocodile downtown, and downtown is also home to Don Francesco's Italian Restaurant which in addition to really good Italian food is an unbelievable game menu. If you want more down to earth variety try one of the Earl's restaurants or Cactus Club. Take a drive out to Sun Sui Wah for truly authentic Chinese.
    These will keep you busy for your two weeks of fun in the snow.

  • Installs hang on G3 B&W

    Hi fellow Mac-lovers,
    This Smurf was handed down to me. It had very little memory, a 300Mhz CPU, a small hard drive, and was running 10.1. Piece by peace, I mustered a gig of memory, a 40GB HDD, a Radeon 7000 PCI I had lying around, and finally a Sonnet 500MHZ G4 upgrade, and installed Xubuntu Hardy in it.
    Everthing was going well, but I wanted to make sure that the Sonnet CPU was what the seller said it was, and I didn't know how to get that information under Xubuntu, so I erased the HDD and installed 9.2.2. Curiously enough, the CPU was listed as a G3 300Mhz.
    I decided to install OS X to make sure, but installing Tiger in the HDD and putting it back didn't work; it would stop halfway during booting and hang there forever. Went back to OS 9, worked fine, still detecting the CPU as a 300Mhz.
    Then I decided to install Panther. No go. At the end of the installation of CD 1, it just hangs forever. Tried several times, same luck, or lack thereof. The base OS 9 continued to work, and I checked the HDD using the Disk Utility in the install. Everything looks fine.
    Frustrated, I tried Erase and Install with Panther, with the same result, the installer hanging and going nowhere. Tried reinstalling Xubuntu, but the installer also hangs now.
    I'm at the end of my wit here. What's going on with this Smurf?
    Any feedback will be very appreciated.
    Thanks in advance.
    P.S. It also has a Sonnet Harmoni PCI card that worked very well in Xubuntu, and should work with the Airport Extreme drivers in Panther, if I ever get to install it...
    P.P.S. Now even the OS 9 install hangs...

    If you cannot Boot to an OS 9 System/install CD, you have a Hardware Problem. Those CDs serve as an incorruptible source of known-good software, eliminating the Hard Drive and the software on it as a source of problems.
    If you have multiple RAM modules, shift each module down one slot and bring the last one around to the first position. If no change, do it again until you have gone through the whole set of possibilities. If no change try removing one module at a time. Above all else, be methodical -- and only change one thing at a time.
    If you CAN Boot to the OS 9 System/Install CD, stop right there -- don't Install anything.
    Find the copy of Gauge Pro on the Hard Drive and double click on it.
    Choose something like "Test Memory" off its Menus.
    Message was edited by: Grant Bennet-Alder

  • I should have left things alone...HP Scanjet 5590 installer hangs

    I had a fairly easy OS X 10.5 upgrade. In my incredible wisdom i decide to go back and clean up some installation. I removed the driver for my HP Scanjet 5590 and tried to reinstall it. About 1/3 of the way through the installation the installer hangs with 8 items to go. It wont complete no matter what I do. I was working after the OS 10.5 upgrade but I decided i would reinstall both my photosmart 3310 and scanjet 5590. The photosmart 3310 installer works perfectly. I removed all pieces of both installs and just tired to install the 5590 with no luck. Does anyone know any solution? Is there a problem with some installers hanging? It says it uses rosetta and its supposedly an universal binary. I have a email into HP support but sometimes I'd rather go to the dentist and have my teeth pulled then deal with them. I may just need to wait and have them fix this but I thought i would query the os x 10.5 community and see if ther was any hope. Thanks! Ira

    I HAD the same problem. I decided to look within the package contents of the COL10829.dmg file I downloaded from HP. I worked my way into it until I found a directory called Sub Installers. I executed ONLY "HP Scan Pro" and "HP Scanjet 2400" (my model). It installed w/o issue. My conclusion is that it is one of the other Sub Installers that is causing the problem. My GUESS is that it's the "HP Image Zone v9.0 Help" installer as there have been some changes in the way help works in 10.5. Just a guess... but it works.

  • BI 7.0 Java Add-on installation hangs

    Hi Guru's
    While doing upgrade of BW 3.5 (Netweaver 2004) to BI 7.0 (Netweaver 2004s) during Java Add-on installation at "Database Instance Java Add-in" phase the installation hang on "Import Java dump" phase.
    I have tried to kill and restart the installation 2-3 times and restarting the complete installation once again it stops at the same phase. Kindly let me know what can be the reason because we have not face this issue in DEV and QA environment. It is my production server.
    The environment is HP-UX IA64 with oracle 10g.
    Thanks in advance.

    Hi Rajesh,
    What stage is the installation hanging at ?
    Please provide any error info from sapinst_dev.log
    Check if java engine is installed and is up and running or not.. You could check the j2ee work directory under which you find j2ee stack related traces.
    e.g. check std_server0 to see if the server is up or not
    Please send more details
    Regards,
    Snehal

  • CRM 2015 installation hangs without errors on Windows Server 2012 installed in a VM

    I have installed a Windows Server 2012 and SQL Server 2012 on a VM using VMware Player and then installed Dynamics CRM 2013, working out all the configuration problems.
    The installation hanged once without errors and when I tried it again it was installed, no problems. Dynamics CRM 2013 works without issue.
    Then I copied the machine, uninstalled the Dynamics CRM 2013 and started installing CRM 2015. However this time without errors the installation hangs even though I tried more than 5 times.
    There are no errors, installation program is not unresponsive and task manager shows nothing out of the ordinary.
    I have also tried this on multiple physical and virtual PCs to no avail.

    Try to Delete the registry files of CRM before you start the installation : HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSCRM

  • Oracle VM 3 Manager installation hangs Step 8 of 9 on Weblogic error

    Hi all,
    I am installing Oracle VM 3.0.3 Manager component for Oracle VM on RHEL 5.5 64 bit Linux OS platform.
    1) The installation hangs on the following step
    Step 6 of 9 : Oracle VM ...
    Retrieving Oracle VM Manager Application ...
    Extracting Oracle VM Manager Application ...
    Installing Oracle VM Manager Core ...
    Step 7 of 9 : Domain creation ...
    Creating Oracle WebLogic Server domain ...
    Starting Oracle WebLogic Server 11g ...
    Configuring data source 'OVMDS' ...
    Creating Oracle VM Manager user 'admin' ...
    Step 8 of 9 : Deploy ...
    Deploying Oracle VM Manager Core container ...
    2) Reviewing the OVM 3.0.3 Manager installation logs shows the following errors:
    Initializing WebLogic Scripting Tool (WLST) ...
    Welcome to WebLogic Server Administration Scripting Shell
    Type help() for help on available commands
    Connecting to t3://localhost:7001 with userid weblogic ...
    Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
    Warning: An insecure protocol was used to connect to the
    server. To ensure on-the-wire security, the SSL port or
    Admin port should be used instead.
    Location changed to edit tree. This is a writable tree with
    DomainMBean as the root. To make changes you will need to start
    an edit session via startEdit().
    For more help, use help(edit)
    Connecting to t3://localhost:7001 with userid weblogic ...
    Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
    Warning: An insecure protocol was used to connect to the
    server. To ensure on-the-wire security, the SSL port or
    Admin port should be used instead.
    Location changed to edit tree. This is a writable tree with
    DomainMBean as the root. To make changes you will need to start
    an edit session via startEdit().
    For more help, use help(edit)
    Starting an edit session ...
    Started edit session, please be sure to save and activate your
    changes once you are done.
    Saving all your changes ...
    Saved all your changes successfully.
    Activating all your changes, this may take a while ...
    The edit lock associated with this edit session is released
    BUILD FAILED
    weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application ovm_core on AdminServer.
    Target state: deploy failed on Server AdminServer
    java.lang.Exception: [DeploymentService:290051]The commit message for the deployment '1,331,919,570,897' could not be completed because the deployment timed out.
    at weblogic.deploy.service.internal.adminserver.AdminRequestStatus.signalCommitFailed(AdminRequestStatus.java:1007)
    at weblogic.deploy.service.internal.statemachines.adminserver.AwaitingCommitResponses.requestTimedOut(AwaitingCommitResponses.java:42)
    at weblogic.deploy.service.internal.adminserver.AdminRequestImpl.requestTimedout(AdminRequestImpl.java:354)
    at weblogic.deploy.service.internal.RequestImpl$TimeoutMonitor.timerExpired(RequestImpl.java:242)
    at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    3) Previous weblogic errors that caused the OVM 3.0.3 Manager installation to hang and fail:
    Your environment has been set.
    Initializing WebLogic Scripting Tool (WLST) ...
    Welcome to WebLogic Server Administration Scripting Shell
    Type help() for help on available commands
    user: weblogic
    timeout: 300
    Connecting to t3://localhost:7001 with userid weblogic ...
    This Exception occurred at Fri Mar 16 10:33:13 PDT 2012.
    Connecting to t3://localhost:7001 with userid weblogic ...
    This Exception occurred at Fri Mar 16 10:34:27 PDT 2012.
    Connecting to t3://localhost:7001 with userid weblogic ...
    Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
    Warning: An insecure protocol was used to connect to the
    server. To ensure on-the-wire security, the SSL port or
    Admin port should be used instead.
    Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
    For more help, use help(domainRuntime)
    Current status is RUNNING
    Disconnected from weblogic server: AdminServer
    03-16 10:34 system.process DEBUG system.process.run stderr:
    javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://localhost:7001: Destination unreachable; nested exception is:
            java.net.ConnectException: Connection refused; No available router to destination]
    at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
    at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:366)
    at weblogic.jndi.Environment.getContext(Environment.java:315)
    at weblogic.jndi.Environment.getContext(Environment.java:285)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
    at javax.naming.InitialContext.init(InitialContext.java:223)
    at javax.naming.InitialContext.<init>(InitialContext.java:197)
    at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:520)
    at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:573)
    at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:313)
    at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
    at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:61)
    at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:147)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    Any ideas how to resolve these issues so that I can successfully install OVM 3.0.3 Manager?

    Issue resolved had to disable Linux firewall

Maybe you are looking for

  • Problems downloading Iphone software 2.0.2

    I have tried 8 time to download the Iphone software upgrade 2.0.2 and after waiting for 2 hours that is when it does not get a computer crush, I get a stop err=-3259 There has been a problem with the down load. Some type of out of time waiting for th

  • Thunderbolt device not showing up...

    I am having issues with my Thunderbolt device (Matrox MXO2 Mini) which allows me to monitor HD video on an external monitor when using Final Cut Pro on my iMac. When I opened my System Profiler, it says there is no devices connected to the thunderbol

  • N95 3.5mm to 3.5mm media lead?? available??

    I am trying to source a 3.5mm to 3.5mm 4-pole media lead that I could use to connect my n95 to external sources, e.g. built-in headset to my crash helmet or PMR system (which in turn would feed into the helmet system) Any ideas? Many thanks Danny

  • Need Information to Configure MIbs in 5508 Controllers

    Hi All, I Need to Know few informations about Mibs, we are  onboarding devices to HP NNM Tool for monitoring purposes. we have 10 wireless controllers.. We need to enable following traps for AP to pull from tool. for the below traps to be enabled wha

  • Wait time between DTP and InfpoPackage

    Dear All, Is it possible to set a constant / dynamic delay / wait time between a DTP and infopackage. I've following scenario in my PC: DSO --> DTP --> Open Hub Destination (AppServer-Folder) --> InfoPackage --> Flat File DS Regards, Ender