X-fi XtremeMusic - Full Installation Option - Windows hangs for two minutes on shutdo

I chose the full installation option for the x-fi xtrememusic soundcard, it installs fine, however after I restart my computer or shutdown, it hangs at "saving your settings" for about two minutes. I checked the "event viewer" in Windows XP Home SP2 and it has a entry stating:
Windows saved user SONY\"My User" registry while an application or service was still using the registry during log off. The memory used by the user's registry has not been freed. The registry will be unloaded when it is no longer in use.
This is often caused by services running as a user account, try configuring the services to run in either the LocalService or NetworkService account.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
However, I then tried the minimum install, and it doesn't hang on shutdown/restart.

If I don't manage to fix this, I will reinstall windows xp but I hope I don't have to go to all that trouble.

Similar Messages

The Server Core installation option is recommended for servers running Hyper-V

Hi,
I installed Hyper-V Server 2008 R2 on my machine and upon running BPA it says that
The Server Core installation option is recommended for servers running Hyper-V
I don't understand what it meant by re-installing hyper-v core instead of the full installation. My Hyper-v is a stand-alone Hyper-V Server 2008 R2 that is the free one.
Thanks!
JAnus

Hi JAnus,
I am afraid you can not change that report .
Please just ignore that .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CS4 randomly hangs for many minutes at a time

I've been doing a number of editing jobs on CS4 for a while now. Started out on a mac but happened to have a pretty decent Windows 7 system on hand so I decided to use that. Here are the specs:
Windows 7 (64-bit)
Intel quad-core i7
6 GB RAM
CS4 installed on 1TB C drive
Project files and scratch disk on striped volume consisting of 3 500GB SATA drives
This setup was performing spendidly on the first few projects I did, but seems to be bogging down as I work on more projects, even though the available disk space doesn't seemed to have changed much. It seems to bog down more on large projects.
What I'm noticing is that as I browse source files and try to set in/out points etc., CS4 will play for a little while and then hang for many minutes at a stretch. It will eventually come back and be usable for a short while but then hang again.
The strange thing is that when it is hung, the system resource monitor shows that the CS4 process is not responding, but it shows very low CPU usage on all cores and no surge in memory usage. Disk I/O also remains relatively low, leaving me at a loss to explain the hangs. I experienced something very similar on CS4 for mac when dealing with these same projects.
The projects have a lot of DV footage split into 2.6GB chunks that I am concatenating together. They also have some HD MJPEG AVIs that I captured using a Black Magic Intensity Pro card.
I should also add that when I finally do get the projects finished and start rendering them, the rendering is very fast overall, which confirms my theory that my machine's performance is more than adequate and these hangs are due to bugs and I/O bottlenecks in CS4 itself.
Needless to say, this is very frustrating. I have less of a problem if a program needs to do something and explains to me why I need to wait while it does it, but I don't like my programs to go away for hours without telling me where they're going.
Adobe people, if you're listening, please respond to this. I have seen a number of other complaints about similar issues. At least let us know if you're aware of these issues and what you are doing about it.
Thanks,
Carl

Well, any progress is good, eh? For MJPEG's, most of us will recommend either the MainConcept, or the Morgan. I wonder how the BM MJPEG CODE's would work, without the card - just thinking there? BTW - more users like the MainConcept by a few.
As far as Adobe goes, if they are going to put up a forum, in my opinion, they should be actively monitoring it and responding to issues. Otherwise it becomes more of a liability than an asset and merely serves to call attention to their own obliviousness.
You make a good point, but I feel that Adobe sees these as an asset in that the best T/S work is done by other users. I always suggest that anyone having any issue with an Adobe product, stop by the fora first. Most never need to go any farther. For tons of free T/S, Adobe pays for the servers and the administration of the fora.
Still, and this is between just you and me, I'd love to hear that there are some "monitors," who do read. As I mentioned, this forum is blessed to have the few Adobe employees, that we do. Photoshop has Chris Cox, one of the developers of PS. Even in his role, however, I believe that he only offers solutions and explanations, and does not "take notes." One exception was when he was compiling a list of "problem fonts" for PS, and asked for contributions with full details on what problems they caused.
When a new upgrade, or an update is issued, we do see more Adobe representation here. It usually starts with a post that something is coming out, and as many details, as are possible to divulge, are given. As we draw closer to the release date, more details are often forthcoming. This presence usually stays until after the release, and we get to comment from the trenches, how the update/upgrade works. Then, I know that notes are being taken. After a bit, that presence fades (as far as we can tell, but who knows?). Sometimes I wonder about those shadows on the wall in the Video Lounge... oh wait, those are just grease stains from the yoodles.
Good luck on your Project, and please keep us updated. My brain just keeps coming back to the MJPEG's, but they probably are not part of the issue.
Hunt

"Enhancement Package Installation" option is missing for CRM 7.0/NW 7.1

Hi Expert,
I am trying to install EHP1 on CRM 7.0/NW 7.1. Following the installation guide, I updated the solution manager to SP stack 24, and use MOPZ to download the software packages. But when I create a new MOPZ transaction, there is only "Maintenance" option for the product of CRM, the "Enhancement Package Installation" option is missing. The Maintenance Optimizer works well for other products, such as Netweaver and ERP 6.0.
Can someone help me? Do I need to apply some notes?
Thanks,
Min

Hello,
It looks like either your company has not enrolled for the Ramp Up of CRM 7 EHP1.
If your company is indeed in the Ramp Up, please check in SCPR20 if these BC sets are activated in the listed sequence:
SOLMAN40_MOPZ_TTYP_SLMO_000
SOLMAN40_MOPZ_001
SOLMAN40_MOPZ_SP18
If one of them has no activation logs or if the date and time of the third one is earlier than the first in the list, then the Maintenance Optimizer BC sets need to be reactivated.
Best regards,
Miguel Ariñ

Installation of Window 7 for my iMac 27 inch

I would like to install window 7 to my iMac 27 inch. Could anyone can answer my following questions.
1) Which format (FAT or NTFS) should i use for creating a Partition for Windows 7?
2) If select NTFS, what partition size should i be select? (ie, 32GB, less than 32GB or can i use more than 32GB)
3) If select FAT, what partition size should i be select? (ie, 32GB, less than 32GB or can i use more than 32GB)
4) This is my first time to install window to my iMac, and i would like to install window 7. So do i have to update my boot camp to version 3.1 before installation?
5) What does it means that NTFS not be able to save files to the window volume?
6) Any other software i need to update before my installation of window 7?

Hi and welcome to Discussions,
I would like to install window 7 to my iMac 27 inch. Could anyone can answer my following questions.
1) Which format (FAT or NTFS) should i use for creating a Partition for Windows 7?
NTFS is a must for Windows 7. It won't install on FAT32.
2) If select NTFS, what partition size should i be select? (ie, 32GB, less than 32GB or can i use more than 32GB)
At least 40GB is a good starting point. Depending on the programs and files you wanna use, maybe more.
3) If select FAT, what partition size should i be select? (ie, 32GB, less than 32GB or can i use more than 32GB)
See above, FAt32 not possible with Windows 7
4) This is my first time to install window to my iMac, and i would like to install window 7. So do i have to update my boot camp to version 3.1 before installation?
See here http://support.apple.com/kb/HT3986 and the BootCamp Installation Guide here http://www.apple.com/support/bootcamp/
5) What does it means that NTFS not be able to save files to the window volume?
OSX can not write to NTFS partitions without additional help, like NTFS-3G http://macntfs-3g.blogspot.com/ or NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/
NTFS can of course write to its own partition. BootCamp Windows can also only read from OSX partitions, unless you use MacDrive http://www.mediafour.com/products/macdrive/
6) Any other software i need to update before my installation of window 7?
See the bottom of this http://support.apple.com/kb/HT3986
Regards
Stefan

Visual Studio Update 2 hangs for 13 minutes on "Creating a system restore point..."

It appears that Visual Studio 2012 Update 2 hangs for a long period of time before it tries to create a system restore point. Should I create a Microsoft Connect issue for this?
Here is what I did:
I created a new Windows 8 x86 Virtual Machine using VirtualBox. I installed Visual Studio 2012 and Update 1 because Update 2 was not yet out. I came back 1 week later and tried to install Visual Studio Update 2.
When I ran the installer on the Virtual machine, it hung for seemingly 10 minutes at "Creating a system restore point..." I powered off the virtual machine and disabled system restore. I then ran with the /layout option on the host machine
so I could pre-download the files. Then I tried again.
Again, it hung. This time I let it go. It hung for exactly 13 minutes before it gave up and continued on to the install. The log file says this:
[0EBC:0F90][2013-04-18T12:39:36]: Apply begin
[0EBC:0F90][2013-04-18T12:39:36]: MUX: Apply Phase Begin
[0EBC:0F90][2013-04-18T12:39:36]: MUX: -----------------
[0EBC:0F90][2013-04-18T12:39:36]: MUX: Metrics: ShouldSendData=False
[0EBC:0F90][2013-04-18T12:39:36]: MUX: Free Disk Space before install: SystemDrive C:\ 32519413760 bytes AppDrive C:\ 32519413760 bytes
[01F4:0748][2013-04-18T12:52:34]: Creating a system restore point.
[01F4:0748][2013-04-18T12:52:34]: Could not create system restore point, error: 0x80070422. Continuing...
NOTE: Although it says "Creating a system restore point" at 12:52, it actually displayed the message on the screen at 12:39. That indicates that it was really doing something else during those 13 minutes, not creating the restore point.
That is corroborated by the fact that it took a long time regardless of system restore being on or off.
If no one has any information or explanation, I will create an issue on Microsoft Connect.

I have the same issue. Visual Studio 2013 Professional update 2 was not installed from Web installer. Rather I downloaded a trial version and now want to uninstall it. However, I let the uninstaller try to create a Restore Point all night while I slept.
Next day, not done. So I clicked cancel, and it then commenced to create a restore point for the cancel. I did let the cancel run for awhile but I rebooted.
I then researched something on how to disable the restore point security on my drive, but that did not deter Visual Studio from trying to protect me and it TRIES to create a restore point before uninstalling. Just hangs forever. I don't need a restore point
for an eval copy of VS, thank you very much. Perhaps a simple dialog ("Do you want to create a restore point?") would be helpful?
Update: turning off Windows Defender fixed the problem.

JRE install hangs for 15 minutes

Mighty all,
We see this behaviour for already quite some time (since JRE 1.6.24 for sure). Silent installation on Win7 x32 hangs for 10-15 minutes and then continues. When digging through the install log I see this:
MSI (s) (AC:E8) [10:55:02:585]: Validating digital signature of file 'C:\Windows\system32\config\systemprofile\AppData\LocalLow\Sun\Java\jre1.6.0_25\Data1.cab'
MSI (s) (AC:E8) [10:55:15:143]: Skipping file hash comparison as no hash was provided for the comparison for file 'C:\Windows\system32\config\systemprofile\AppData\LocalLow\Sun\Java\jre1.6.0_25\Data1.cab'.
Any thoughts what might be causing this?
Many thanks in advance!
Alex
Edited by: user9020829 on Aug 2, 2011 12:59 PM

Back to this thread, we continue to see this problem every now and then, and here are more details:
It looks like the .exe wrapper does not detect completion of the MSI installer part (and the log actually reports "MainEngineThread is returning 0" and then "verbose logging stopped").
I have made a full dump of the "idle" installer after msi part is completed and have installation log too - if someone from the java team could look into it, will be greatly appreciated.
Roger, answering your question re. case: unfortunately our support contract with oracle does not cover java support, so my case opening request has not been completed.
Edited by: user9020829 on Mar 13, 2012 4:23 AM

Why does my OS X 10.6.8 have various applications hang for several minutes, then resume. This is not a startup problem.

I upgraded to Mac OS X 10.6.8 a few weeks ago. It seemed to be running OK, so we upgraded another system also. Now both machine are, from time to time, stalling whatever application is running. Everything stops or runs veeeeeeerrrrrry slowly for several minutes even including bringing other windows to the front. The disk runs almost like it is swapping a lot. Then the system frees up and runs normally for a while. This is not a startup problem. I occurrs on systems that have been running for a day or two or more. It happens on an iMac and on a MacBookPro. Neither of them had this behavior before the 10.6.8 upgrade.

Jocke27 wrote:
What do you mean with corrupt?
Why did you suggest that I created a new profile?
There are cache files and other system files that are created every time a user account is created. Sometimes these are corrupted in the OS and it really has no bearing on the specific application but it can lead to erratic behavior. Creating a new user recreates all these system files and thus it's almost like starting fresh. It's one step shy of re-installation of an OS. So because changing the user fixed the issue, then we have eliminated the fact that the application is causing the error and we know the OS is causing the error.
I can't just go in to that profile when I want to use?
I wouldn't recommend it. This can lead to more problems with the OS down the road with other applications and depending on where the corruption lies it can lead to issues with OS upgrades or even installing new software. The files that are typically most critical to users are stored in the Applications folder or the Documents/Sites/Pictures folders. You can easily drag them over to a new user account. If you have email being backed up for a product like Thunderbird you can also bring over many of the Library items as well.

SOAP requests hang for 5 minutes. Why?

As a first step in using the SOAP features integrated in Java 6 I went through the JAX-WS 2.0 tutorial at http://java.sun.com/developer/technicalArticles/J2SE/jax_ws_2/.
I created the simple webservice as well as the client (I am not using the Netbeans IDE but I did the corresponding in my IDE).
I started the service in a local VM and started the local client application as well.
What's really odd is: the service and the client worked on first attempt (and I verified this by inserting println statements into the code), but the return of the result always hangs for pretty exactly 5 minutes (by when - I guess - some timeout strikes).
I.e. the client issues the request and the server-side gets called practically immediately, but the result is passed back to the client only 5 minutes later.
At first I had thought, that things didn't work, but when I got distracted and later returned to my screen I found, that my WebService requests had actually worked as designed.
But why does the return of the response take 5 minutes? Any ideas, anybody?
Michael

I've seen similar behavior, but not on every invocation. In my case:
1) Nightly backups were starting at 5:30PM every day - every request then timed out;
2) Our development servers were virtual machines - they were often slow to wake up.
Otherwise, the web services responded normally.

In my firefor options window I have two zipped folders one allows me to brows and see what is inside the other does not give me this option. how can I see what is inside please?

I have had MyWebSearch install itself as my primary browser....I have needed to reset Firefox in safe mode but I am not sure that the changes have actually been done! In Options in the Options menu the window displays all the add on's and features that are on Firefox....I have two zipped folders here One allows me to see inside the other does not. How do I access this one that does not give me the option to as I want to know what is inside...as this "MyWebSearch has been an enormous hassle...and needless to say has compromised my PC and the security of all of my passwords.....I want to be sure that the resetting the browser default has actually worked and that MyWebSearch is gone!
Regards
Coco

Are you talking about MyWebSearch toolbar (http://help.mywebsearch.com/sbar2.html#q1) which offers apps such as Smiley Central, Cursor Mania???
If yes, uninstallation instructions are here - (http://help.mywebsearch.com/sbar2.html#q4). Could you provide me some details about the ZIP folders. If I get a screenshot, I can help you very well.

Cs5 installer auth. window asks for name

following computer repair, i have a brand new OS, my default name is in the field : MacBook, I entered years old password, says name or
password are incorrect. what name do they want from me

You must ask your computer repair shop what username and password they set with administrative rights. Only an administrator can install software.

Some applications starting slowly / hang for a minute after launching

Hi!
For some time now, some applications are starting really slowly. The ones I could identify by now are Apple Pages, Microsoft Excel and Wofram's Mathematica. When I click the respective icon to start the application, the dock symbol jumps and everything looks fine, the system doesn't hang but when the just started application is active (its name appears on top, next to the Apple logo), the mouse cursor turns to the famous spinning beach ball when I move it to the top of the screen. The same happens when I just close an Document and create a new one (when all Pages documents are closed, the program presents all the templates; when I choose one, it hangs).
This behaviour doesn't appear everytime, but very often, so it is repeatable. I can't identify some point in time when this started, I don't think it has something to do with the 10.4.6 or 10.4.7 update. Pages is the newest version, as is Excel. Mathematica is version 5.2.0. I absolutely have no idea where to start to look for a reason for all this. I hope that someone here can help me!
Thanks in advance,
Marco
iBook G4 Mac OS X (10.4.6)

Hi!
Thanks for your answer too!
1) Run Disk Utility and Repair Permissions on your hard drive.
Did that, some permissions were corrected (as always...)
2) Boot from your Tiger install disc and run Disk Utility and use the Repair Disk option on your hard drive.
After checking the disk, the Utility said that everything is fine.
1) You mentioned that this problem has been going on
for some time now. Can you think of any software
that you installed or software that you updated at
the time that you first noticed this behavior?
Unfotunately, I can't. This started about 3-4 weeks ago but I absolutely can't remember installing or doing something special that falls into the same region of time.
2) Do you run any kind of system hacks/optimizing software?
No, not as far as I know. I don't think that I ever installed some piece of software that really alters something in terms of the system itself (except for TinkerTool System, but I didn't start that in months)
3) What programs do you typically have open all of the time?
Mail and Safari are running all the times; other applications I'm using frequently are TextWrangler, X11, XCode, Terminal and World of Warcraft, among others.
(Almost) Sure Fire Solution to this problem: [...]
I knew that this was coming up
Of course, a complete reinstall is a solution I don't really like. I got my iBook last October, so this installation is running for 9 months now. But as everything else is fine, I really don't want to format my HD and do it the hard way.
By the way: I tried a few more applications and surprisingly, Apple Keynote, MS Word and MS Powerpoint don't hang after starting up. I also deleted all iWork and MS Office related stuff in ~/Library/Preferences and still no luck...
Marco

Best tiling window manager for two monitors

I am looking for a window manager, that will work thus, my main window on my main left monitor, and my stack (my unfocused windows) on my right monitor. Is there a WM that can do this or anyone know one that comes close.
Thanks

skottish wrote:
If it helps at all, this is a useful way to look at awesome vs. xmonad:
awesome is pretty much a complete WM/DE (it's close to being a full DE) with a task bar, system tray, run dialog, something like nine preconfigured window management algorithms, right-click menus, etc. Through lua scripting it can be fully extended. There's a lot to awesome by default and more often than not users are going to start to tear it down because there's just so much of it.
xmonad out of the box is about 5% WM and 95% toolkit to build your own. It has no DE features upon first start and few layouts. If your objective is to build up your WM and not to tear it down, this is a good place to start. The GHC dependency is irrelevant if this is your goal (assuming you can afford the hard drive space) in my opinion.
One thing that's pretty cool about xmonad that a lot people may not realize is that some of it's developers are involved with Arch. Arch-haskell (the bazillion packages in AUR), Real World Haskell (the book), and GHC are all tied nicely together by some of these people.
What is cool about XMonad too that you can integrate Gnome and KDE easily in XMonad and bluetile is really cool for starters

Anyconnect client and clientless connections hang for two users

ASA 5525, v. 9.1(5)19
Anyconnect client 3.1.02026
I have two users who are unable to connect via the AC client or clientless through the web portal. Using the client, it will get stuck in a loop of "checking for updates". On the portal, the connection will proceed to the point of "Cisco Secure Desktop successfully validated... Success.. Reloading..please wait." Then it hangs there.
The issue occurs for the user regardless of which company laptop she logs onto. A help desk tech can use her laptop and successfully connect, but she cannot connect on her own laptop or on another laptop. (Same for the other user.) So the issue doesn't seem to be related to her laptop or the AC installation. (Help desk did reimage her machine early in the troubleshooting process before they realized that the issue seemed to follow the user.)
I've updated the hostscan file - no change in results. Client and clientless connections seem to be working fine for all other users. We're stumped. Suggestions, anyone? thanks!

The LDAP should be server folks -- Active Directory. Chances are whoever manages the ASA's should have access to at least look in Active Directory to look that up. If they don't they need it.
I obviously don't know a lot about what devices you are using, but if you are using ISE, there should be some type of MNT device (Monitoring and Troubleshooting) -- which is collecting the logs and, hopefully, sending them to some type of syslog aggregate collection tool (splunk?).
Otherwise, there should be a device called a CAM (Clean Access Manager) that is collecting logs -- which may also be propagated to a syslog aggregate tool -- although with CAM's, you can pull the reports right out of them in a comma deliminated file (.csv) and go through them that way.
-- The thing that gets me is that it happens to two users no matter what computer they try to connect from, no matter what network they connect from, and other users can authenticate and gain network access on those same devices.
-- That is why it is rather perplexing. Pretty much saying it has to be something with:
- the IP pool they are getting an IP from
- their AD credentials
- their username
- something along those lines, if the information provided was fully accurate.

When opening a page, FF sometimes hangs for several minutes, the main thread consuming 100% of the running core

I've not been able to detect a pattern of occurrence. It just happened now when I opened this page
http://www.pcinpact.com/actu/news/66460-amd-catalyst-rage-vsync-opengl.htm
soon after starting FireFox (which loaded the dozen tabs - in two windows - of my current session).
Here is the stack of the main thread, as shown in Process Explorer :
ntdll.dll!ZwQueryDirectoryFile+0xa
wow64.dll!Wow64EmulateAtlThunk+0x8c77
wow64.dll!Wow64SystemServiceEx+0xd7
wow64cpu.dll!TurboDispatchJumpAddressEnd+0x2d
wow64.dll!Wow64SystemServiceEx+0x1ce
wow64.dll!Wow64LdrpInitialize+0x429
ntdll.dll!RtlUniform+0x6e6
ntdll.dll!RtlCreateTagHeap+0xa7
ntdll.dll!LdrInitializeThunk+0xe
ntdll.dll!NtQueryDirectoryFile+0x12
xul.dll!??0Layer@layers@mozilla@@IAE@PAVLayerManager@12@PAX@Z+0x1589
xul.dll!NS_NewLocalFile_P+0xb536
xul.dll!?AccumulateMetricsForRun@gfxTextRun@@AAEXPAVgfxFont@@IIW4BoundingBoxType@2@PAVgfxContext@@PAVPropertyProvider@1@IIPAURunMetrics@2@@Z+0xdc07
xul.dll!?AccumulateMetricsForRun@gfxTextRun@@AAEXPAVgfxFont@@IIW4BoundingBoxType@2@PAVgfxContext@@PAVPropertyProvider@1@IIPAURunMetrics@2@@Z+0xf951
xul.dll!?Stroke@gfxContext@@QAEXXZ+0x2ad
xul.dll!?Stroke@gfxContext@@QAEXXZ+0x9ab
xul.dll!NS_InvokeByIndex_P+0x72f99
xul.dll!?SanitizeMetrics@gfxFont@@IAEXPAUMetrics@1@H@Z+0x1048
xul.dll!?Paint@gfxAlphaBoxBlur@@QAEXPAVgfxContext@@ABUgfxPoint@@@Z+0x2e2
xul.dll!?ReleaseTextRun@gfxTextRunCache@@SAXPAVgfxTextRun@@@Z+0x4f6
xul.dll!?TransformToNativeRect@gfxWindowsNativeDrawing@@QAEXABUgfxRect@@AAUtagRECT@@@Z+0x13c
xul.dll!??0ImageContainerOGL@layers@mozilla@@QAE@PAVLayerManagerOGL@12@@Z+0x1318
xul.dll!??0ImageContainerOGL@layers@mozilla@@QAE@PAVLayerManagerOGL@12@@Z+0x142c
xul.dll!??0gfxSkipCharsIterator@@QAE@ABV0@@Z+0x85a
xul.dll!??0ImageContainerOGL@layers@mozilla@@QAE@PAVLayerManagerOGL@12@@Z+0x1444
xul.dll!??0gfxSkipCharsIterator@@QAE@ABV0@@Z+0x85a
xul.dll!??0ImageContainerOGL@layers@mozilla@@QAE@PAVLayerManagerOGL@12@@Z+0x1444
xul.dll!??0gfxSkipCharsIterator@@QAE@ABV0@@Z+0x85a
the last two functions are called recursively over 40 times...

Today, I was able to open the older version of the template if I only viewed the code first. So I was able to narrow it down to one change I had made. I had changed:
<link href="/css/960grid.css" rel="stylesheet" type="text/css">
to:
<link href="http://mydomain.com/css/960grid.css" rel="stylesheet" type="text/css">
When I tried to save the document, Dreamweaver hanged. The document opened fine with all of the other changes I had made, although it couldn't find the CSS files (I had moved the site to another root locally).
This really looks like a bug in Dreamweaver to me. I've seen CSS links like this in other people's websites, so it does look like valid CSS to me. Is there a workaround for this?

X-fi XtremeMusic - Full Installation Option - Windows hangs for two minutes on shutdo

Similar Messages

Maybe you are looking for