X-Fi XtremeMusic MIDI recording issues and other SoundFont issues

I am attempting to record output from the MIDI synthesis through "What U Hear", but seem to be getting periodic pops. This is while recording at 24/48 - the problem is much worse at 24/96; I get a constant scratchy noise or silence until I stop recording. Note that I am in "Audio creation mode" at this stage.
Additionally, I have found that while having 3rd party SoundFonts loaded and playing a MIDI file, I experience the following issues - missing notes and percussion and notes playing with with the wrong pitch.
Is anybody else experiencing these issues? I am using the latest 1187 drivers.
Cheers

DSM wrote:
I am having issues with the balance of the input signal from my turntable to my Elite Pro. The turntable in connected to Aux 2 with the switch on the console in the phono position. The signal from my turntable (B&O RX2) is slightly off balance with the left channel signal slightly higher than the right channel. I have attempted to use the Master Auxiliary Balance control in audio creation mode to balance the signal during recording. Unfortunatly I have not been able to make it work as adjusting the balance control has no impact on the recorded signal. I have worked with Creative and to date they have not provided a working solution. I have moved my card from one slot to another, uninstalled and reinstalled the software on numerous occasions and taken every step suggested by Creative. I have an ASUS A8N SLI Premium motherborad. Creative thinks the board may be the issue. Does anyone have any suggestions?
- old cardridge/stylus being worned out,
- weak connectors/connections,
- too light stylus pressure (try 2-3 grams),
- dirty/dusty stylus,
- mispositioned stylus (not straight, wrong 'arm'length (if adjustable),
- wrong connection imbedance,
You can also try if connecting turntable through amplifier (w/ RIAA) to X-Fi Line-In makes any difference --> shows out, if the RIAA pre in X-Fi is not working properly.
jutapaMessage Edited by jutapa on 09-05-2006 0:30 AM

Similar Messages

Ical stopped syncing to treo 650 and other quirks

I have been using ical with the palm software on my treo 650, but now updates to my calendar aren't syncing.
I don't know of any changes that I've made, and I think I have checked all of the settings.
I don't know if this is related, but a couple of weeks ago my ipod suddenly said "not configured to this computer" or something like that, so I had to delete my entire library of music and re-import it.
Also, the settings for Safari had to be reconfigured.
Hmmm....does anybody have any ideas why these programs are acting like that?

Welcome to Apple Discussions.
There have been widespread, unexplained issues involving iSync and Palm devices, many of them involving an inability to synchronize at all with iCal. I've seen no specific solution for such problems.
While I never experienced a complete failure of calendar information to pass in one direction or the other, I did have a number of easily demonstrated, repeatable errors crop up with my Treo 600 and iSync under Mac OS X 10.4 and iSync 2, which had never occured under prior releases. For example, the Unfiled calendar would periodically pop up, even though I had selected another calendar - Palm devices - into which Palm-created calendar entries were to be transfered. And, I was never able to synchronize more than three of what were then twenty-seven automatically created birthdays, in the Address Book generated Birthdays calendar. And there were a host of other issues, including the home vs work address label problem, the inability to synchronize more than one address, data duplication within records and occasional record duplication, and other annoying shortcomings.
I simply got fed up, and updated to The Missing Sync for Palm OS version 5. What a difference! All of the quirky iSync behaviors are now a thing of the past. While it seems ridiculous that you would have to install an additional third-party application to synchronize correctly, my experience with iSync - particularly since the release of iSync 2 and Mac OS X 10.4 about six months ago - tells me that it is.
If you are interested in exploring this comprehensive, long-term solution, you can find more information about that application here:
http://www.markspace.com/missingsync_palmos.php

No sound from headphones and other issues.

Greetings.
I was working in a previous version of GB and this version (09 ver 5.1) is not real acoustic guitar friendly, I'm finding. But maybe you can help me out.
First my set-up: Acoustic guitar with pick-up>LR Baggs Para DI pre-amp>M-Audio Fastrack Pro USB.
Computer, Latest OS, driver for Fastrack, Mac system sound Preference settings Input=Fastrack Pro Output= Audio line out (my speakers are connected to that on the back ofhe MacPro.
In the GB audio/midi prefences Audio Out to Built-In line Output, Audio Input= M-Audio Fastrack
So my first issue, If I create a real instrument track, I can't seem to monitor my audio when the headphones are plugged into the M-Audio device. So I plugged the headphones into the front HP jack on the front of MacPro, and still no sound.
BTW- I tried toggling the Ducking menu item to no avail.
I also tried creating an "electric guitar" track, but that just presents a whole bunch of amps, not what I want. So I think the "Real Instrument is for me.
I also noticed that when I enable the "record" button on the track, it shows that I am getting a signal, but the Master Volume shows no activity. However if I record something and play it back, the Master volume shows activity. I remember in my previous version, the Master Volume would be active all the time I think.
But for now, my main issue is the lack of headphones.
Can you guys help?
Thanks.
Jonathan
Message was edited by: Jonathan Levin2

Solved. A setting on the M-Audio interface. Signal knob needed tweeking.

App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive. These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
Any help is very much appreciated,
Thank you!
DT
MacBook Pro 13-inch, Mid 2009
Processor 2.26 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

PSE 11 editor has stopped importing from scanner, no longer permits drag and drop, will not permit cropping, and other bizarre issues

Windows 8.1, PSE 11
I am having a number of issues including loss of import functionality from scanner, I can't drag and drop photos into the editor any more as well, or at least not after the first one. The crop function stops working after the first couple of photos. Then some freezing. A little added crashing. A plethora of other bizarre issues as well. This just stated happening a couple of days ago.
What I have tried:
Uninstall/Install.
Deleted preferences both before opening Editor (crontrol-alt-delete) and after opening it.
Kindly advise. Thanks!
Adobe Photoshop Elements Version: 11.0 (11.0 (20120830.r.32025)) x32
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 3500 MHz
Built-in memory: 8139 MB
Free memory: 5185 MB
Memory available to Photoshop Elements: 3255 MB
Memory used by Photoshop Elements: 70 %
Image tile size: 128K
Image cache levels: 6
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1440, right: 2560
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 660 Ti
Driver Version: 9.18.13.3750
Driver Date: 20140327000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 2560 x 1440 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 660 Ti
Video Card Memory: -2047 MB
Application folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\
Temporary file path: C:\Users\evan\AppData\Local\Temp\
Photoshop Elements scratch has async I/O enabled
Scratch volume(s):
Startup, 931.2G, 805.4G free
Required Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Required\
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2011/03/29-16:11:44   63.457850   63.457850
   adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
   AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0
   AdobeOwl.dll   Adobe Owl 2012/06/20-18:39:56   4.1.9   78.509892
   AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
   AdobePDFL.dll   PDFL 2011/03/29-16:11:44   63.378681   63.378681
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2010/10/12-08:45:30   63.139439   63.139439
   AdobeXMPFiles.dll   Adobe XMP Files   5.0   61.134777
   adobe_caps.dll   Adobe CAPS   4,0,42,0
   Adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.2.0.4 (BuildVersion: 2.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
   AGM.dll   AGM 2011/03/29-16:11:44   63.457850   63.457850
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   1.486530
   aif_ogl.dll   AIF   3.0   1.486530
   amtlib.dll   AMTLib   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
   amtservices.dll   AMTServices   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
   ARE.dll   ARE 2011/03/29-16:11:44   63.457850   63.457850
   asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1
   AXE8SharedExpat.dll   AXE8SharedExpat   3.3   49.279053
   AXEDOMCore.dll   AXEDOMCore   3.3   49.279053
   AXSLE.dll   AXSLE   3.3   49.279053
   Bib.dll   BIB 2011/03/29-16:11:44   63.457850   63.457850
   BIBUtils.dll   BIBUtils 2011/03/29-16:11:44   63.457850   63.457850
   boost_threads.dll   DVA Product   5.0.0
   cg.dll   NVIDIA Cg Runtime   2.0.0015
   cgGL.dll   NVIDIA Cg Runtime   2.0.0015
   CoolType.dll   CoolType 2011/03/29-16:11:44   63.457850   63.457850
   data_flow.dll   AIF   3.0   1.486530
   dvaadameve.dll   DVA Product   5.0.0
   dvacore.dll   DVA Product   5.0.0
   dvaui.dll   DVA Product   5.0.0
   ems.dll   Elements Organizer   11.0
   ExtendScript.dll   ExtendScript 2010/03/05-08:21:15   61.423205   61.423205
   FaceDetector.dll   FaceDetector 0000/00/00-00:00:00   2.0.1.1   2.0.1.1
   FileInfo.dll   Adobe XMP FileInfo   5.0   61.134777
   filter_graph.dll   AIF   3.0   1.486530
   hydra_filters.dll   AIF   3.0   1.486530
   icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   image_compiler.dll   AIF   3.0   1.486530
   image_flow.dll   AIF   3.0   1.486530
   image_runtime.dll   AIF   3.0   1.486530
   JP2KLib.dll   JP2KLib 2011/03/29-16:11:44   63.196876   63.196876
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   MPS.dll   MPS 2011/05/24-09:45:42   63.464027   63.464027
   MSVCP100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1
   MSVCP71.dll   Microsoft® Visual Studio .NET   7.10.3077.0
   MSVCR100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1
   MSVCR71.dll   Microsoft® Visual Studio .NET   7.10.3052.4
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop Elements Editor   11.0
   platform.DLL   Adobe Help System   1, 0, 0, 1
   Plugin.dll   Adobe Photoshop Elements Editor   11.0
   PSArt.dll   Adobe Photoshop Elements Editor   11.0
   PSViews.dll   Adobe Photoshop Elements Editor   11.0
   ScCore.dll   ScCore 2010/03/05-08:21:15   61.423205   61.423205
   shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300
   Tbb.dll   Intel(R) Threading Building Blocks for Windows   2, 2, 2009, 1011
   updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
   WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
Required plug-ins:
   Accented Edges 12.0
   ADM 3.11x01
   Angled Strokes 12.0
   Auto Divide 11.0.0.0 (11.0 (20120830.r.32025))
   Average 12.0.2
   Bas Relief 12.0
   BMP 12.0.2
   Camera Raw 7.4
   Chalk & Charcoal 12.0
   Charcoal 12.0
   Chrome 12.0
   Clouds 12.0.2
   Color Halftone 12.0.2
   Color Variations 12.0.4 (12.0.4x001)
   Colored Pencil 12.0
   Comic NO VERSION
   CompuServe GIF 12.0.2
   Conté Crayon 12.0
   Correct Camera Distortion 12.0.2
   Craquelure 12.0
   Crop and Straighten Photos Filter 12.0.2
   Crosshatch 12.0
   Crystallize 12.0.2
   Cutout 12.0
   Dark Strokes 12.0
   Difference Clouds 12.0.2
   Diffuse Glow 12.0
   Displace 12.0.2
   Dry Brush 12.0
   Extrude 12.0.2
   FastCore Routines 12.0.4 (12.0.4x001)
   Fibers 12.0.2
   Film Grain 12.0
   Filter Gallery 12.0
   Fresco 12.0
   Glass 12.0
   Glowing Edges 12.0
   Grain 12.0
   Graphic Novel NO VERSION
   Graphic Pen 12.0
   Halftone Pattern 12.0
   Ink Outlines 12.0
   Lens Blur 12.0
   Lens Flare 12.0.2
   Lighting Effects 12.0.4 (12.0.4x001)
   Liquify 12.0.1
   Matlab Operation 12.0.4 (12.0.4x001)
   Mezzotint 12.0.2
   MMXCore Routines 12.0.4 (12.0.4x001)
   Mosaic Tiles 12.0
   Multiprocessor Support 12.0.4 (12.0.4x001)
   Neon Glow 12.0
   Note Paper 12.0
   Ocean Ripple 12.0
   OnEdge 1, 0, 0, 1
   Paint Daubs 12.0
   Palette Knife 12.0
   Patchwork 12.0
   Pen and Ink NO VERSION
   Photocopy 12.0
   Picture Package Filter 12.0.4 (12.0.4x001)
   Pinch 12.0.2
   Pixar 12.0.4 (12.0.4x001)
   Plaster 12.0
   Plastic Wrap 12.0
   PNG 12.0.2
   Pointillize 12.0.2
   Polar Coordinates 12.0.2
   Polar Coordinates 12.0.4 (12.0.4x001)
   Poster Edges 12.0
   Radial Blur 12.0.2
   Read Watermark 4.0
   Reticulation 12.0
   Ripple 12.0.2
   Rough Pastels 12.0
   Save for Web & Devices 12.0
   ScriptingSupport 12.0.4
   Shear 12.0.2
   Smart Blur 12.0.2
   Smudge Stick 12.0
   Solarize 12.0.2
   Spatter 12.0
   Spherize 12.0.2
   Sponge 12.0
   Sprayed Strokes 12.0
   Stained Glass 12.0
   Stamp 12.0
   Straighten and Crop Image 12.0.4 (12.0.4x001)
   Straighten Image 12.0.4 (12.0.4x001)
   Sumi-e 12.0
   Texture Fill 12.0.4 (12.0.4x001)
   TextureSelect 12.0.4 (12.0.4x001)
   Texturizer 12.0
   Tiles 12.0.2
   Torn Edges 12.0
   Twirl 12.0.2
   Underpainting 12.0
   Water Paper 12.0
   Watercolor 12.0
   Wave 12.0.2
   WIA Support 12.0.4 (12.0.4x001)
   Wind 12.0.2
   ZigZag 12.0.2
Optional and third party plug-ins:
   Frame From Video 6.0
   Magic Extractor 12.0.4 (12.0.4x001)
   PhotomergeUI 12.0.4 (12.0.4x001)
Plug-ins that failed to load: NONE
Installed TWAIN devices: NONE

Final Update: ...god willing...
OK! Check it, like I said in previous posts I seemed to have narrowed it down to specific mp3s not converting and playing in their native sample rate which if paired with another sample would give you the "audio midi sync" error and basically screw up your clock! It appears mp3 files converting to mp3 using iTunes would not convert to the correct sample rate if set to something other than 44 in logic and cause this. A tad peculiar Apple iTunes won't work with Apple Logic. I was able to confirm this on two mac's via my friend in Florida. He's running Tiger and tried the same experiment and Booya! Mickey Mouse! It appears this insane week long adventure has came to an end (...god willing) with a super specific unlucky shot in the dark on my part finally revealed to be an perfectly normal function of Logic (obviously one i'm not fond of..) As far as the errors / crashes / system overloads / kernal panics I think I can sort those out to the mackie onyx satellite not being a good choice and trying to add and remove firewire devices in the middle of the sample rate mayhem. Wow! all I can say is, I'm glad it's over
Wish me a lot of luck in the future.. I'm sure i'll need it!

I just purchased a macbook pro and am trying to get itunes library and other documents from macbook 2.1 running 10.4.11 and migration assistant tells me to update but it tells me i am up to date...confusing...how do i fix this issue?

am trying to import from macbook to macbook pro using migration assistant...tells me that i need to update old mac but macbook tells me it is up to date???? any hints on how i fix this issue? running 10.4.11 and it wont update further...please help.
JVS

The camera must be plugged in to AC power (not batteries only). And generally, the camera should be set to Play mode, not recording mode.

HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

Problems Importing LPs and other recorded music to my iMac

Hi All
I am trying to import my vinyl LPs and other music to my iMac using my JVC MIDI System with a record dec attached. The only output connection is for a standard jackplug (headphone) socket, other than the cable connection point for stereo speakers (at the rear of the system). I was sold a standard cable with a jackplug at either end and told that by connecting this to the input side of my Mac it should work. This does not seem to regognise any form of imput from my MIDI system can anybody help please!
Thanks in advance.

Hi Martin
Thanks for your response I have only used this forum once before and wasn't tosure what details where relevant. I am also not sure if I can provide answers to all your questions but will do my best;-
It would help if you tell us the exact make & model of the equipment you are using.
Your Mac? -IMac 11,1
What JVC MIDI system? Unfortunately it is an old system now and I don't appear to have kept the manual. It is a JVC COMPACT COMPONENT MD SYSTEM MX-MD9R R-D-S EON.
What "record dec?" Actually, what do you mean by "record dec" in the first place? Do you mean yourturntable? It is an AIWA PX-E800 turntable which i connect and play through the aux side of the JVC system
Is your JVC MIDI system capable of providing the RIAA EQ for vinyl LP's? dont know
What software are you using on your Mac to do the recordings? ITunes 11.0.2
In general, I wouldn't use a MIDI device for recording analog audio. They weren't intended for that purpose.
Thanks for your help Paul

LE8 won't remember audio recording path (among other issues...)

Why won't LE8 remember the audio recording path I set for each project? Each time I open a project I've been working on (by dropping the project onto the LE8 icon in the dock-LAME) and arm a track to record, it says that that the path to the external HD is not found (-but it knows the name of the external HD somehow). I'll then open the record prefs, set the recording path correctly to my external HD and the coressponding folder, save the project, and record without incident (or at least the same incident) for the rest of my session. The next time I open the project the same thing happens.
LE7 never had this issue.... weird and annoying.

For generic performance and trouble-shooting advice I’d like to recommend reading these:
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
As for the specifics:
The image size is 4.31M. If I go to double the size and change nothing else, the image size jumps up to a whopping 17.2M.
If you double the dimensions of an image the area is increased fourfold – so what is the problem there?
The image dimensions are 500px x 135px, 300DPI, 8bit, RGB color. This is at 100% zoom. Those are the settings I normally use, but for some reason it’s showing the file as about half of the size it should be. (Tumblr post for comparison—they are 500px wide.)
The introduction or Retina (and other high resolution) displays and browsers actually up-scaling images to accommodate those screen resolutions seems to have confused some users about the concept of pixels.
Could you please post a full size screenshot on this Forum of the image at View > 100% in Photoshop and on tumblr?

I work for a teaching hospital. We are using groups of 20 to 30 iPads for access to patient electronic records, video conferencing software, and other, HIPPA compliant apps. I need to be able to access the iPads to shut down and erase in case of loss.

I work for a teaching hospital. I have started a program to place Physicians and key support personnel on iPads for electonic medical records, video conferencing software, and other HIPPA compliant issue. I have a need to have one central program that can push out updates, other information, but most importantly, can erase the iPad in cases of loss or stolen. Can anyone direct me to such software.
Thanks,
Wayne Hodges

The Mac mini does have somewhat powerful specs at top end.
Mac mini with OS X Server features a 2.3GHz quad-core Intel Core i7 processor that delivers incredible speed and performance, thanks to innovations like Turbo Boost 2.0, Hyper-Threading, and an integrated memory controller. Add in 6MB of L3 cache, and you’ll find that Mac mini with OS X Server is packed with power.
http://www.apple.com/mac-mini/server/
Here is a list of mdm's:
MDMs
Airwatch, Meraki, MobileIron, OS X Server, or Zenprise
Airwatch
http://www.air-watch.com/
Meraki -- A free MDM [ expect lots of email and phone calls about upgrades ]
http://www.meraki.com/products/systems-manager/
https://discussions.apple.com/thread/4067210?tstart=0
Good howto by Sergio Sosa.
https://discussions.apple.com/thread/2594001?start=15&tstart=0
MobileIron
http://www.mobileiron.com/
Zenprise
http://www.zenprise.com/

Slow finder indexing, and other Mavericks issue

Since downloading Mavericks i have two issues that have started to become annoying..
When i open a finder window, or when trying to save something, the indexing takes ages. Was always instant in mountain lion..
Also now if i right click an image for example that is an attatchment in mail it brings up the "open with" option but when i hover on it i just get "preview, colorsync and other"
I used to get a list and always had the option of adobe photoshop cs6 ... i now have to click on other everyu time and search through my applications to find cs6. Is there no way of getting it back to a list of options?
I am on an 21 inch iMac. 2.66 core 2 duo with 8 gb 1067 ddr3 memory... mid 2009 iMac if it makes any odds.

@shashinka ; I'm sorry I did not tell it before but I have maxed out memory RAM on my MacBook (I got 8 GB in total) well before Mavericsk and I also find that is not a memory related problem. Do not be sad and considers that having more memory is almost always a good thing in general (and that you can resell it too).
Another thing i do not mention: I have the same problem on my other Mac ( iMac (21.5-inch Late 2009) ) that had maxed memory too ( 16GB there).
The point is this "systemstas" hog process.
Now I read 6 "I have this question too" : someone else want to add an articulated response ?
I am a little surprised that I did not even have found a single person who does not agree with my post (or even just with my polemical tone). I begin to suspect that here, in the house of the Big Apple, no one is interested in listening to real stories about "customer dissatisfaction", that's simple something that "cant be".

Loss of audio after upgrade os x 10.7.5, reset PRAM, SMS, updated software and other recommendations i could find. Master volume sliders inactive in Audio Midi section. Can see sound bar responding it input on line in but is not being internally routed.

Recently upgrade to OS x 10.7.5 resulted in loss of what appears to be internal communication of line in audio, and output. Have tired several remedies including resetting PRAM, SMS, updating all software, multiple Sound and Audio Midi applications adjustments to no avail. Also no audio is recognized on USB mixing board I tried as well, though Audio USB Codec was displayed. THe master volume sliders and other options are greyed out on Audio Midi application whn I try to troubleshoot that. Nothing external will play through computer speakers, but internal sounds and iTunes play normally.I made sure the audio sampling rates were default. Software issue or soundcard/hardware failure.?..Pullin my hair out!

Might be corrupted sound preferences ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following;
/Library/Preferences/Audio
Click Go then move both .plist files from the Audio folder to the Trash.
com.apple.audioDeviceSettings.pllist
com.apple.audio.SystemSettings.plist
Restart your Mac. See if that made a difference ...

I record a midi keyboard track and it sounds fine as Im recording it, however, it won't play back in time no matter what I do, seems awfully useless to have all these "great software instruments" and not even be able to use them, one problem after another

I record a midi keyboard track along with a song, it sounds great, then, when i go to mix, playback, the midi track is behind the beat and out of sync.. i've tried every setting I can think of.. the strangest thing is that I've used this exact keyboard in the past with this exact computer, running the same version of logic pro, and it worked fine, now it just doesn't work.. it seems an awful waste to have all these "great software instruments" but they are essentially useless now... it is beyond frustrating to have this so-called "great technology" that doesn't even work and to spend more time TRYING to get it to work than actually doing some work with it...

After re-reading the first post, I don't think it would be quantize, either, sorry about that.
There are a couple more places to look:
Look at the highlights, one is for track, one is for region. Notice how I have it on MIDI thru (top part). That has a delay value. When you select a region, you can have a different value there, as well. Also, the Track part has a place with a delay value. These are three delay values that are in addition to the audio preference Recording delay.

Recording audio and midi at the same time ??

Is it possible to record audio and midi at the same time in logic?? It doesnt seem to work for me, im assuming there must be unchecked box somewhere that I need to check. thanks,
Dan

Daniel,
You should be able to accomplish this by hitting record on the audio track, and then while holding the "Shift" key down, hitting record on the MIDI track (or visa versa).

X-Fi XtremeMusic MIDI recording issues and other SoundFont issues

Similar Messages

Maybe you are looking for