X-FI Xtrememusic not default midi device (vis

I need to set X-FI as the default midi device but i cannot find anything on my computer to set the midi device at all. I have windows vista and had to download the drivers for it. I am guessing this is the problem. If anyone knows where i can go on my computer or how to change the default midi device to X-FI please let me know because going to control panel Sound that option isn't availble. Thanks much. -
Matt

If you installed the beta drivers, you will not be able to change midi options. You may have to wait for the non-beta drivers to be released.

Similar Messages

Yamaha p200+motu fastlane midi interface=GB not recognizing midi device =0(

tried hooking up my motu fastlane midi interface to my yamaha p200 and to my mac mini for use in garageband. GB is not recognizing a midi interface. i read elsewhere that i may need a driver, but would it be for the yamaha p200 (keyboard) or the motu fastlane midi interface? or is it a driver for garageband??
please help!!

You need Motu's midi driver...Go to their site for the current version...in the Downloads section.
You will need to log-in or register if you haven't already.
Once installed and restarted you need to set up your midi connection in Apple's: Audio Midi Setup utility and connect the Fastlane to the Yamaha...
Link here if helpful:
http://www.showmeprotools.com/apple-ams-audio-midi-setup-for-pro-tools/
Just imagine the Pro-Tools interface is the Fastlane...
Typically the manufacturer model and names are no longer supplied in the Properties window. You can enter whatever names you want in that section. It doesn't matter. So don't worry if it's blank or not as shown in the link.
If you want to use the internal sounds of the P200 then you will need to use the analog output connections from the P200 into the analog inputs of an audio interface...using a real instrument track.

Stuck notes from external midi device

I just started using Logic today for the first time. I hooked up a MOTU midi express XT as an interface between my MacBook Air and a Proteus Orchestral synth (old rack model). Also hooked a FATAR keyboard (controller) to the interface. Everything shows up fine in the audio / midi setup windows. I was able to figure out how to set up several tracks in Logic pointing to the multiple channels on the external midi device (synth). So far, so good. But when I started recording the tracks I ran into stuck notes from the synth. I've had this in the past on other sequencing software and don't remember how to solve it? In addition, while recording the tracks from my keyboard controller notes would occasionally not play, almost like there was a memory / cpu problem.
Any thoughts would be appreciated.

In case you need to get back the default Logic control surface setup you can delete the Control Surface preference file and the default file will be rebuilt. It's a good way to get back to Logic's initial control surface setting. Also, if you had chosen to edit the Logic Remote CS entry instead of remove it there are adjustments that can be made, like disabling Active Sensing, or even disabling "Flash Mute and Solo Buttons" on the basic Control Surface Preferences pane.
Deleting the Logic 10 Control Surface Prefs.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Delete the com.apple.logic.pro.cs file from the preferences folder.
Note: to get to the User-Library the tilde ~ has to be included. ~/Library/Preferences

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the n

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!

Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel

After reinstalling MAC OS 10.6.8, config the permissions to read/write/no access, my MacMini [mid 2010] refuses to reboot. I tried to reboot in safe mode with fsck, but after the steps to be taken, it says fscs not done, root device is read only

After reinstalling MAC OS 10.6.8, I config the permissions to read/write/no access, my MacMini [mid 2010] refuses to reboot. I tried to reboot in safe mode with Command+S and fsck, but after the steps to be taken, it says fscs not done, root device is read only. I also tried to bypass the Mac firmware password by taking one Ram card out and reboot the macmini while holding COMMAND+OPTION+P+R. But no luck. The macmini is not able to see the mac OSX installation CD.
Please help ??

f.fromleiden wrote:
After reinstalling MAC OS 10.6.8, I config the permissions to read/write/no access, my MacMini [mid 2010] refuses to reboot.
How and where did you change which permissions? And what was the goal?
Do you have a complete backup of your system? and more importantly data files?
What happened that prompted the need to reinstall the 10.6.8 update?
The immediate road forward would be to boot from the optical drive and revert the changes you made.
What happens when you boot with the install cd and hold down C or hold down the option key?
[Off topic: I've been to Leiden a few times ]

MIDI Device in Garageband Not Working? No Results!

So I've been REAALLLY wanting to buy an electric drumset, and record drums using that. The only way I could do so, is by getting one with a MIDI output and triggering the signals using my favorite kit on Toontrack's Superior Drummer.
Welp, guess who finally bought one!
Awesome, now I have problems....
So this drumset is plugged into my MacBook pro via USB cable. This IS a USB MIDI output. I'm in Garageband, and I turn on my e-set. Garageband welcomes it with a "1 MIDI Device input detected". Great! Then what? Nothing. No sound, no feedback, nothing. Garageband detects my device, but nothing else. It does not detect a single hit or stroke. The flashing blue LED on the bottom of GB (that usually goes on when a MIDI device is in use) is not flashing either. It plays nothing.
I tried going into my Mac's Audio MIDI Device Setup application, and it detects my instrument! But no results. No sound. Nothing. And it's ******* me the **** off. When I go into "Test My Device", nothing happens when I use the kit. What the **** is going on?
It's a Simmons SD5X Electric Set.
Need all the help I can get here folks.

This has already been discussed here numerous times. You should do a search on the forum and read the Logic for Garage Band Users pdf. When you open a midi file in Logic, the tracks are not assigned to virtual instruments like in GB, they're only midi tracks. If you want to hear sounds, you have assign them to an external sound module, to the QuickTime synth available in Logic or you have to create audio instruments tracks and move you midi data to those.

USB midi device not showin up/installing

hello.
thanks in advance for anyone that can help me out here.
after many late nights trying to install the nana pad2 on my imac and failing...i've run out of ideas.
imac 27" OSX 10.7.5
2.8 core i5
12G ram.
i have the latest drivers (got them last night...again)
installed and re installed and manually deleted them and tried reinstalling several times.
no matter what i do the korg will not show up in
'UTILITIES' > Audio MIDI setup. nothing shows up in there other then my presonus audio interface.
i go into studio one and with the nano plugged in (via new usb cable) i can get midi "info" data to show up in the
'MIDI monitor' when hitting the pads...but no instruments are able to be triggered by the pad.
i've followed the install instruction for adding devices in studio one. but the main issue here is its not showing up at all in my imac "utilities".
i see some on the forums have got it working...but dont actually show or say how.
anyone out there conquered this??
thanks.
http://i1351.photobucket.com/albums/p797/sikapple/imac_nano2014-02-15at42643PM_z ps7cb1755d.png

this is what i was looking for.
if anyone else has this issue:
audio midi setup > preferences > open specific winows.
(korg midi device is still not working in daw though. )

VISA do not find RAW device in linux??

Hy. I have usb device with product ID and vendor ID. My operational system is Linux Fedora. Linux system find my device,but Labview (VISA) do not find this device.Can somebody tell my, where is the problem??

Hello qwqwqw,
Dennis is correct, and that is the document you want to reference. Specifically, Part 4 is about USB on Linux and Mac. Officially though, National Instruments does not offer email or phone support for Linux Fedora.
Good luck with your application!
Meghan
Applications Engineer

Garageband recognize USB MIDI device - Still will not play.

I am using the newest version of Garageband with Yamaha YPG 525 keyboard connected via USB as a MIDI controller. Drivers installed successfully. This is not my first Yamaha keyboard used with Garageband. This issue I'm having is that under System Preferences it shows the MIDI device connected but will not allow me to select as the "input" device. It shows up in the "Audio MIDI Setup" app, and I've selected the "Send All Notes On" under the Yamaha driver application listed in System preferences. It's getting very frustrating because clearly GB sees it's there but just refuses to make playing it an option. I have searched dozens of forums but cannot find someone having the same issue. Please help!

this is what i was looking for.
if anyone else has this issue:
audio midi setup > preferences > open specific winows.
(korg midi device is still not working in daw though. )

ALSA: Setting default device (Not card, but device)

This seems to be a riddle that nobody can solve;
- The system only has one card by the name of 'Intel'
- That card is the regular 6 3.5mm jack soundcard.
- I have a mic plugged into the red microphone plug
- I open up Audacity and go to preferences, there are two microphone plugs, 'hw:0,0' and 'hw:0,2'
- I have no idea where 0,0 is and it doesnt make any sound, I plugged the mic into every plug on the board and nothing records.
- i can set Audacity to use 0,2 and then it will record my voice just fine
When I open up xfce's mixer I see that there are two mic plugs:
Apparently "Front Mic" is the device that is hw:0,0 right now/
Now when I play Savage2 I don't have an option to choose the device, I can choose the soundcard but that doesn't help. How do I set the default Device so that the game uses hw:0,2 in push-to-talk?

from the alsa archwiki:
"Setting the default Microphone/Capture Device
Some applications (Pidgin, Adobe Flash) do not provide an option to change the capture device. It becomes an issue if your microphone is on a separate device (i.e. USB webcam or microphone) than your internal sound card. To change only the default capture device, leaving the default playback device as is, you can modify your ~/.asoundrc file to include the following:
pcm.usb
type hw
card U0x46d0x81d
pcm.!default
type asym
playback.pcm
type plug
slave.pcm "dmix"
capture.pcm
type plug
slave.pcm "usb"
Replace "U0x46d0x81d" with your capture device's card name in ALSA. You can use 'arecord -L' to list all the capture devices detected by ALSA."
EDIT: maybe i didn't read your post well enough.. im just guessing here but maybe you can replace card U0x46d0x81d with
device name_of_device..
maybe..
Last edited by test1000 (2010-10-24 17:06:36)

Usb midi devices do not appear on os10.4.10

i've seen some similar complaints about firewire audio devices, and usb harddrive on this forum;
i've got a a few usb midi devices (m-audio oxygen8 and edirol ua-25) that do not show up anywhere on my computer (black macbook, os 10.4.10); i've checked the audio midi setup area, and all of the various software preference areas (garageband, absynth, reaktor, etc).
the workarounds for the firewire audio don't look like the right thing to do. i've installed the v1.1 audio update. with no change in problem.
the edirol usb device is an audio and midi device; the audio works fine (before i did the 1.1 update, crossing fingers that it still works) but the midi does not appear to exist on my system.
i've updated the drivers from the respective hardware vendors, no luck. looked for similar issues in all the knowledgebases i could find. every answer tells me to do what i did the first time. so i do it again and it still doesn;t work.
has anyone else had this issue? or has anyone else had a positive experience with usb midi devices?
i've recently switched from pc to mac,
so i've some out of depth feeling on the details of mac fer sure.
thanks,
dylan

Oh my god. All I had to do was reboot. Marking as closed.

Default MIDI Note Velocity

When I enter MIDI notes in GB the default MIDI velocity is always 63, and there doesn't seem to be any way to set a different default. Although I realize I can change the velocity later, this is kind of annoying given that most of the generators seem to require a velocity of at least 100 to produce a reasonable sound level. Is there any way to specify a different default velocity?

I don't believe there is, 63 seems to be it, no modifier keys or preference setting changes that.
The only suggestion I can offer is that if you're changing the velocity on each note you can save some effort by selecting them all. I found the slider a little wonky, but functional. (it jumped all the way to the top after selecting them all, and labeled that 63, but when I dragged it a little it snapped to 127)

Mid 2010 Macbook Pro does not see other devices in airdrop

Hi,
I am able to turn on airdrop. There are no restrictions preventing me seeing other devices or them seeing me. I am unable to connect with my iPhone 5 or IPad air 2 in airdrop. Any suggestions to resolve this issue?
Thanks,
Andy

There are none. A pre-2012 Mac will not see iOS devices in AirDrop.
(119470)

MSI P4M900M2 - MSG : MPU-401 Compatible MIDI Device not manage Install

Hi,
I just Re-install my PC to Windows XP and all the drivers had installed. Only have problem with this : MPU-401 Compatible MIDI Device unable to install. Any one had come across this issue, please kindly advise.
Thank you very much.
Desmond

Do you got sound at all?
Does the Audio Controller is enabled in BIOS?

USB MIDI devices not detected under OS 10.5.2

Leopard's Audio Midi Configuration doesn't detect my Korg microKontrol, Novation Remote Zero SL and my Evolution MK-249C2 MIDI keyboard. Firewire MIDI device is detected (RME fireface 800).
Using the "latest" drivers - Novation Automap Universal 2.0.1178 driver, microKontrol 1.0.7 driver, Evolution keyboard doesn't need a driver.
installed Leopard yesterday, but I think I'll switch back to Tiger...

USB Hub was faulty!

X-FI Xtrememusic not default midi device (vis

Similar Messages

Maybe you are looking for