X-fi2 touch screen messing up after sync

sometimes after syncing music to my X-fi2 32Gb the touch screen will start becoming unresponsi've and badly inaccurate (try pressing on an icon but it will scroll across) when I finally get to the touch screen calibration and try to calibrate, it keeps asking me touch touch each corner of the screen and doesn't finish, the only way to fix the problem is to press the reset button on the bottom of the player, I've tried reapplying the firmware but no success

Hello Yourma2000,
The only thing I can think of that can probably cause touch accuracy to go nuts is some third party ap
ps.
Do you have games installed on your player?

Similar Messages

Lenovo A1 - Touch screen not working after digitizer replacement

After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways.
I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
You can say thank you by pressing the star left to my post IF I HELPED YOU

2ng gen ipod touch, Apps NEVER work after sync, please help a noob

2ng gen ipod touch, Apps NEVER work after sync.
am i missing something? i basically have to lose all my apps in order to add tunes.
its doing my head in, Help pweeeessee..

Hi
Try to reset your iPod and then deauthorize and reauthorize your computer, then sync the iPod again.
To reset the iPod touch just hold the Home and Sleep/Wake buttons until you see an Apple logo appear.
You can deauthorize the computer from the iTunes Store menu.
This article: http://support.apple.com/kb/TS1702 provides more general troubleshooting tips for applications purchased from the App store.
-Jason

IPod Touch Screen not Working after using Assistive Touch

Hey everyone!
Yesterday my iPod Touch 4th gen touch screen froze (not the screen itself - it still wakes from sleep & responds to notifications and charging etc.), after myself accidentally taping 'Voice Control' on Assistive Touch.
I was wondering, since it's out of warranty (it's a couple of years old), I can't send it back. I'm currently backing up & restoring it.
Can anyone tell me if it's the software or hardware? It's going to take at least a good day or so to backup & restore, due to storage is full, and it's 32GB capacity, so it'd be good to know in advance.
And if anyone has got any other suggestions to fix it, please let me know! It'll be much appreciated.
Thanks heaps!
PS. Please don't tell me to repair it...it'll cost just as much to fix my whole iPod, buttons & screen than it is to buy a brand new one!!

There is really no what to know if hardware or software problem without trying to restoring the iPod. First from backup and then to factory settings/new iPod. If still problem then it is a hardware problem.

Yoga 13 touch screen stopped working after update KB3000850, please help!

Hi, my Yoga 13 touch screen has been working fine until yesterday. The laptop came with Windows 8, and last year I upgraded to Windows 8.1 without issue. Yesterday, I installed optional update KB3000850 from Windows Update, and immediately the touch screen stopped working. I have tried the following methods, all without success:
* Uninstall KB3000850 from Windows Update
* Use Windows Restore to restore to the point before yesterday
* Re-install Intel Chipset Driver from Lenovo official driver page
* In Device Manager, uncheck all the "allow system to turn off to save power" options for the USB input devices under Human Interface Devices then restart
* Two-button shutdown and restart
* Install Lenovo Driver Manager and let it check for new drivers
* Download Cando multi touch panel driver (Note: I could not install the driver because all I got was a .cab file which does not allow me to install)
As of now my touch screen is still not working. Computer Information page from Settings shows that there is no touch or pen device for my screen.
Can anybody help me with this? Thanks!

Very true, this has been a known problem since the first day Lenovo released the Yoga 13.
I need to send Lenovo a bill for my time spent rebooting. So far i am on my 8th reboot. In the past, around 5 reboots after winddows update would work. This time... who knows.
Of course it always happens when you have a deadline.
Please post back if you have found a better soultion than system restore.
Thanks for posting this issue. More users need to bring this to Lenovo's attention.

HP Pavilion 11 x360 - touch screen not working after upgrading to Windows 8.1 Pro

I installed windows 8.1 pro and now my touch screen isnt working. i checked system screen and it says NO PEN OR TOUCH INPUT AVAILABLE
and i have 2 keys swoped on my keyboard. The @ and " i

Hello theow,
Welcome to the HP Forums!
I understand the touch screen on your notebook is not detected after updating to Windows 8.1.
This would be the best place to start: Troubleshooting Touch Screen Issues in Windows 8. This is a great document that covers touchscreen issues from start to finish. Do not be alarmed that it states the document pertains to TouchSmart PC's, as the steps are the same.
It would also help to know which product you are using so I can give you more detailed information, such as driver downloads.
For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
Hopefully this gets you going!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Touch screen not working after installing windows 8.1 hp pavilion ts 15-n200se laptop

touch screen keybord is comming but touch screen is not working no responses...plz help me

Hi @jewaxen
Welcome to the HP Forums!
It is a fantastic place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your touchscreen is not responding.
Was there any changes made before this issue occurred?
Have you checked for viruses or malware? Microsoft Malicious Software Removal Tool
Have you ran the HP Support Assistant to aid with HP updates and resolving issues?
Have you tried using Using automated troubleshooting (Windows 8)
Here is a link to Troubleshooting touch screen issues in Windows 8 that will guide you through some steps.
If after completing the steps in the above link the issue remains, I suggest contacting HP support for further assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Touch screen not responding after iOS 7.0.2 update

This morning I updated my iPhone 4s with the iOS 7.0.2. After the update I was prompted with the "Hello > slide to set up" screen, but when I tried to "slide it" nothing happened. I tried many times with my finger and a stylus, but still nothing. The screen eventually went black as it does when there is no activity. When I press the home button the "slide to set up" screen reappears. I tried holding the power button down, but couldn't "slide to power off". I restarted it by pressing the hold and home buttons at the same time, after the restart it went back to the "slide to set up" screen. The touch screen was working just fine up until the update. Please help me figure out what's wrong with my phone!

I'm sorry to hear about the issues that you've recently ran into with your device. I'll do everything I can to ensure you have a working device.
Do you have iTunes on your computer? Have you done a restore since the issue has been going on? http://support.apple.com/kb/HT1414
YosefT_VZW
Follow us on Twitter @VZWSupport

Touch Screen wont work after i plug into a charger...?

Anyone else have this problem.. Its very annoying. I have to take the battery out of the phone while its on after every time i charge it...ug.

I have the same problem.
After putting the bb in a charger the touch screen does not work properly. Only the main buttons are available.
Regards,
Rubin
Thanks in advance

HP Envy Touch Screen / Touchscreen dead after Windows 10 install

Tonight I upgraded from Windows 8 whereby my touchscreen worked perfectly to Windows 10 whereby my touchscreen on my HP Envy laptop is totally non-responsive. Is there a fix for this problem? Does HP have a new driver or software that will fix this problem? Is this a Microsoft problem that we have to wait until and update? I have read where others have experienced the same. I cannot imagine Microsoft not supporting touch screens since it is required in tablets, phones and many cross over laptops and computer monitors these days. Please help

Update. The Edge Browser did not work until after several shutdowns and restarts over a couple of days. It was initially "not responding." Now it is working and the touchscreen capability is working - on the Edge browser. The touchscreen capability is not working in the Chrome browser but all other functionality is.

Touch Screen Vibration broken after updating to th...

I just updated the firmware on my 5230, and I've noticed that it messed-up the Touch Screen Vibration setting, Level 2 & 3 work properly, but Level 1 is now the same as Level 3...

Type *#7370# and the phone's lock code (Nokia default lock code is 12345). Note that this code will wipe your phone & mass memory. So, backup first.
If you want to thank someone, just click on the blue star at the bottom of their post

Touch screen wont boot after outage

Hello, My Home touch screen will not boot after outage. It was working on backup. Outage lasted 4 hours.Just a black screen, power indicator light is not on while plugged in. thanksJOhn

If you undo the stand and remove the battery cover you can access the battery and remove it (after removing the power). Then put everything back the way your found it and plug in the touchscreen it will be a full power reset. If it still donesn't work you will need a tech to look at it. You might need a small screw driver to get the stand and battery cover off the touch screen.

Touch screen not working after windows 10

Touch screen is not working after windows 10 was down loaded. Also the zoom keeps changing on it's own. Does anyone know how to fix this?

Could you provide the unit's Model name/number?

Touch screen not working after system update

A few months ago, my laptop (Satelitte P55t-A5202) went through an automatic system update. Ever since then, my touch screen won't work. I followed the directions to reinstall the HDI programs several times. The first time it worked but only for a few hours. The next time I tried to reinstall, it worked for a second. Now reinstalls do nothing.
Before the system update, my touchscreen worked fine. And in reading the forums, this seems to be a common problem with the updates. I called TOSHIBA customer service for help. The FIRST thing they want to do is charge me for tech support because my laptop is out of warranty. I told the customer service rep repeatedly that my touch screen worked fine until the update. He refused to give me any help because I did not want to pay for him to tell me how to resolve...
In my opinion, this is a toshiba issue not mine so regardless if my laptop is out of warranty, Toshiba should take ownership and be accountable for the problems they cause.
Does anyone have any suggestions as to how to take care of this?
By the way, Toshiba customer service representative was rude, you could barely understand him because of his accent, I had to repeat SEVERAL times what my issue was because he couldn't get past the warranty issue and I had to ask several times to speak with a supervisor ( to which he told me a supervisor would call me instead)

See my reply in the laptop forum.
-Jerry

My HP Envy touch screen stopped working after getting an HP Bios update yesterday

Can someone please tell me how to fix my touch screen. I received an HP BIOS update which caused my touch screen to stop working. I've tried re-calibrating it but it won't accept my touch which tells me the screen is no longer enabled.
I tried finding where to enable and could not find where to enable finger touch. I've also tried looking for driver updates and the driver appears to be up to date.
Thanks
This question was solved.
View Solution.

I have a different type of TouchSmart, but this may work for you:
Press the Windows logo key + X (if using a Windows 8 computer -- if Windows 7, click the Start button, type Device Manager, and click Device Manager in the search results).
Select Device Manager from the list.
Click the little arrow next to Human Interface Devices to expand the list.
Click the touch screen driver (in my case, NextWindow Voltron Touch Screen).
Right-click, and select Enable from the list.
Click Yes if a dialog box asks if you are sure you want to enable the touch screen driver.
On some models, it isn't obvious which device in the list controls the touch screen. I have read in other posts that some people have fixed the problem by disabling and re-enabling each device.
If that does not work, you might try going to hp.com (http://www8.hp.com/us/en/support-drivers.html) and clicking Drivers & Downloads.
In the search field, enter your product name or number, and then click Go. Select your operating system from the drop-down list under Select your operating system, and then click Next. If there are any available graphics drivers under Select a download below, click the plus sign next to Driver - Graphics, and then click the driver name. In the Download options and information window, click Download . Follow the onscreen directions to download the driver. Restart the computer.
~Lil.Liebe
Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
Click Accept as Solution on a reply that solves your issue to help others in search of answers.

X-fi2 touch screen messing up after sync

Similar Messages

Maybe you are looking for