X-Forward not supported by HTTP/S?
We're trying to set up ACE as described in document ID 107399 with the goal to have the IP address of the connecting HTTP clients inserted as the "X-FORWARD" attribute in the HTTP header. With HTTP it works but with HTTP/S it doesn't. Is this feature effectively limited to unsecure HTTP clients?
Hi Jan,
It is possible to insert headers/cookies into a HTTPS connection, but, to do that, the ACE needs to be able to decrypt the traffic. It's what we call end-to-end SSL termination.
There is an example on cisco.com that explains how to configure this. The example is inserting cookies, but, inserting the x-forwarded header would be equivalent. See the link below for more details:
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a00809c6f37.shtml
With this kind of configuration, the ACE will first terminate the SSL connection to decrypt the traffic, then do any kind of L7 processing (parsing the HTTP header, inserting headers or cookies, rewriting URLs...) and, once it has finished all the processing and chosen a real server to handle the connection, it will open a new SSL connection to the server and send the request encrypted again.
Please, do not hesitate to contact me again if you still have questions after going through the example.
Regards
Daniel
Similar Messages
-
Export excel not supported in https using firefox
Export excel option is supported in http URL but not supported in https using firefox.
Hi Gnittala,
Thanks..
Pls find more info in below...
In our application 'export excel' option is present in 4 different pages. Using Jquery to calling the excel. All the excels working in development environment in both IE and FF. In testing env, all the excels working fine in IE. But only 2 pages excel are working in FF in testing env. Remaining not working and 'The connection was reset The connection to the server was reset while the page was loading' error page appears when we click on 'export excel' button.
More, all the Export excel option is supported in http URL but mentioned two only not supported in https using firefox.
Dev server OS is windows...QA / Prod server OS is Linux.
Application running on Interent site.
No specific instructions for exporting data to Excel (note: same scenario working on IE & FF in Dev env) -
Playback not supported by http proxy when using Amazon instant video - what to do?
Message
playback not supported by http proxy when using Amazon instant video - what to do?Settings > General > Reset > Reset Network Settings
-
It appears that Adobe Air does not support persistent HTTP connections?
As far as we can tell, Adobe Air does not support persistent HTTP connections via KEEPALIVE
Thus a new connection has to be established to the server, making certain types of network intensive applications slow.
Can anyone confirm if this is correct - is there any way to get Adobe Air to support KEEPALIVE and maintain persistent server connections?
aI am trying to get 3.3 Beta 2 with Flash Builder 4.6 on Windows 7 x64bit to work. But still no luck.
I have Flash Builder 4.6 on Win7 to work no problem.
I have updated the playerglobal.swc to 11.3 using http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/flashplay er11-3/flashplayer11-3_p2_playerglobal_041812.swc
but still run into the same problem below:
I can't go through the steps to create a new Flex Mobile Project because of the following error "Air 3.3 Beta does not support mobile projects".
However, I have no problem creating a Flex Project (Web & AIR) and ActionScript Mobile Project. -
Palm 755p not supported in Leopard?
I have been syncing my Palm 755p in Tiger using Missing Sync for some time. Then I upgraded to Leopard... Missing Sync didn't hold a connection, and the 6.0 version seems to have it's own problems, so I decided to try iSync.
The problem is that iSync won't even recognize the phone! When I try to add the device it says, "This device is not supported by iSync". But I see that others are using it with iSync in this forum. Any idea what's happening here?
I'm on a MacBook, with a 10.5.1
Bradi had the same issue. I just did not use isync. Only certain devices are supported by isync. i have a 755p Palm. The Palm Treo 755p is not supported on the palm Tungsten and Zire families. The Pocket PC is also not supported see http://www.apple.com/macosx/features/isync/.
You must purchase third party software from http://www.markspace.com/missingsync_palmos.php from mark sync for $39.95. Then your palm Treo 755p can sync with ical and mac address book. Then you can publish your ical and address book to .mac (dotmac).
First, I installed the version of Palm that came on the CD with my phone. Then, I installed the latest version of the Palm v 4.2.1 Rev D from the website at http://www.palm.com/us/support/macintosh/macdesk421revd.html#sysreq. Then I did a hot sync to secure my information. Then I purchased and installed the missing palm sync from mark space. Then I hot synced again. I followed the instructions of letting the mac overwrite the handheld for the first sync. So after the sync i had to export my calendar and contacts from palm then import into ical and address book. Then I synced again.
Afterwards, I published to my .mac and selected update automatically. No problems ever since.
PS. I am running Leopard 10.5.1 on the new 24" imac.
http://forums.palm.com/palm/board/message?board.id=macintosh_hotsync&message.id= 5000&jump=true#M5000 -
Why adope flash player is not supported with ipad 2, iphone 4?
I really want to know why?
'Adope' flash player is not supported because : http://www.apple.com/hotnews/thoughts-on-flash/ - and Adobe havn't managed to create a version that works on iOS devices, and have apparently now stopped trying.
-
CUOM 2.1 does not support 2960-24PC-L?
The 2960-24PC-L switch is not being correct classified as such by the CUOM 2.1, hence it's not shown as a "switch with phones connected".
On the Common Services it's shown with a question mark icon. The Mdf version is 1.22, but on the install manual it says that we should not update Common Services and only use specific update for CUOM.
The customer have phones connected on it but the report do not show the switch/port where those phones are connected.
How to solve this problem?Seems not supported device:
http://www.ciscopowerednetwork.net/en/US/docs/net_mgmt/cisco_unified_operations_manager/2.2/device_support/table/OMdvs22.html -
Upload Error message: HTTPS protocol is not supported
Hi,
Whenever I do a quick par upload i'm getting an 'Operation failed' message to check sap-plugin.log.
Log says
Upload Error message: HTTPS protocol is not supported, please ensure this server is not using HTTPS. My webdynpro applications are getting deployed without any issues.
How to resolve this?
Thanks
SumathiHi Sumathi,
As there are often problems with the Quick PAR Upload reported, I would suggest to use the "normal" PAR upload from the icon tray (you have to activate the portal icons in the icon tray). That is almost that "quick" (one or two clicks more needed, we don't talk about more than a second) and - it works (it least it should, and at least it works in most cases even if the Quick PAR Upload fails).
Hope it helps
Detlev -
SAP XI Error HTTP 505 HTTP Version not supported
Hello Everybody,
I have IDOC(sender) to WEBSERVICE(receiver) scenario.
Our server is XI System version "SAP J2EE Engine 6.40 PatchLevel 105424.313". Webservice has generated in MS Sql Server 2005 and publish in MS IIS server.
I downloaded webservice schema in external definitions. and i mapped with idoc fields. When i try to Test Configuration in integration directory, everything is fine.
But when i test to scenario, it doesnt work. I checked logs in integration engine monitoring. I got
this error " com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 505 HTTP Version not supported"
does anyone have any idea for that error? what should I do for run the this scenario?
Kind Regards,
RasimYou may first contact your receiver partner for the HTTP version they support. There is a mismatch somewhere.
http://www.checkupdown.com/status/E505.html
Regards,
Prateek -
GRMG RFC Configuration "HTTP method GET is not supported by this URL"
Hi All,
when i create the RFC Destinaton for SLD with regards to GRMG Configuration and test the rfc i get the Reason code 400 with error "HTTP method GET is not supported by this URL".
Even if i call http://hostname:port/sld/rtc in the browser i get the same error.
RFC Details:
Target machine:Host
Service No: port no
path prefix: /sld/rtc
My other RFC destinations for rwb,IR,ID,Adapter Engine works well.
I would appreciate your suggestions on this
AravindHi David,
I feel sorry to wake this thread up after long time.
It's the same situation, connection testing for SLD returns 400 "HTTP method GET is not supported by this URL".
However, CCMS hearbeat seems to work fine with SLD. It returns green.
I have a question here. Is it OK if we leave it that way without changing GRMG?
Is there any potential problem, or side effect when the RFC destination returns 400?
Thank you very much,
Teyun -
Hi,
My scenario is IDOC to Webservice.
I have done all design and configuration,
I used Receivere adapter as SOAP dapter.
When i am running the scenario i am getting following error.
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 505 HTTP Version not supported"
regards,
XIHi,
This happens when target service expects a specific version of the HTTP protocol (1.0, 1.1 etc) and client does not match this expectation ... Try to check if target requires a specific version (1.1 only for instance) whereas XI uses another.
Rgds
Chris -
The requested operation is not supported on forward only result sets.
hi,
com.microsoft.sqlserver.jdbc.SQLServerException: The requested operation is not supported on forward only result sets when using rs.relative() method. this exception occurs when using com.microsoft.sqlserver.jdbc
st = con.createStatement();
rs= st.executeQuery("select * from emp1");
rs.relative(2);
regards,
gopiI suggest you use the following instead of 'relative'. Its a more standard way of doing it.
while(rs.next()){
String x1=rs.getString("firstName");
} -
HTTP 501 Not Implemented or HTTP 505 Version Not Supported
when trying to post on the ABAP Forum, i am getting the following:
The website is unable to display the webpage
HTTP 501/HTTP 505
What you can try:
Go back to the previous page.
More information
This error (HTTP 501 Not Implemented or HTTP 505 Version Not Supported) means that the website you are visiting doesn't currently have the ability to display the webpage, or support the HTTP version used to request the page.
For more information about HTTP errors, see Help.
i have tried from firefox, chrome and IE and unable to post.. i may look stupid and this may work here! lol!
but i have been trying for several hours to post a question on the ABAP forum... :o(You have been "bagged" by SAP Security's cross site scripting filter. No way around it (for obvious reasons). Somewhere in your post there is something that is interpreted as an xxs attack. Unfortunately, happens a lot when trying to post code or code terms. Some people have managed to work around this using some of the same tricks used by people wanting to post forbidden words and phrases like
myemal at sap dot com
j a v a s c r i p t
and the like. Try some experimenting and you might succeed. -
Using Netbeans with Axis 1 shows HTTP Version Not Supported
Hello,
I need to use Axis 1 with Netbeans. So i have integrated Axis 1 in build.xml file to use axis ant targets. If i am executing the deploy target:
<target name="AdminClientDeploy" description="adminClient" depends="validate">
<java classname="org.apache.axis.client.AdminClient" fork="yes"
dir="." classpathref="${classpath_id}">
<classpath>
<pathelement location="${build.classes}" />
</classpath>
<arg value="-l ${service.url}/servlet/AxisServlet"/>
<arg value="${basedir}\src\${service.java.path}\deploy.wsdd" />
</java>
</target>It shows
running Apache Axis Admin client
Processing file D:\\Axis1WS\src\java\axis1\deploy.wsdd
Exception: AxisFault
faultCode: {http://xml.apache.org/axis/}HTTP
faultSubcode:
faultString: (505)HTTP Version Not Supported
faultActor:
faultNode:
faultDetail:
{}:return code: 505
{http://xml.apache.org/axis/}HttpErrorCode:505
Java Result: 1
BUILD SUCCESSFUL (total time: 1 second)I have no idea whats the problem, but i think it's a configuration problem with netbeans. The compilation itself shows no problem. Please let me know, if you have some experience and especially if you know this problem.
Thanks
AlexHello, problem is because of following part:
<!-- The URL of the Web SERVER + Application Name -->
in the tutorial, there is a space in URL, when you remove this space, problem disappear;
<property name="service.url" value="http://localhost:8084/${ant.project.name}"/> -
RisPort Help~ HTTP Version Not Supported
Hi,all~
I'm trying to get a realtime information(Phone ip address) by AXL RisPort,but i get a error: "HTTP Version Not Supported",it is so strange~!
i have added a web reference(https://<myCmServer>:8443/realtimeservice/services/RisPort?WSDL) on my web site with VS2005(C#).
help me~Thanks a lot.Thanks for your reply,
This really works.
But the problem now is in
RisPort web service's Method,
SelectCmDeviceResult SelectCmDevice(ref string StateInfo, CmSelectionCriteria CmSelectionCriteria);
i don't know what's initialize value of StateInfo,so i make it null,but the response of SelectCmDeviceResult.CmNodes is null,so i can't get any realtime information. can you help me?
there is my source code:
CM5WebReference.RISService myRis = new CM5WebReference.RISService();
ServicePointManager.ServerCertificateValidationCallback = new System.Net.Security.RemoteCertificateValidationCallback(ValidateServerCertificate);
CM5WebReference.CmSelectionCriteria csc = new CM5WebReference.CmSelectionCriteria();
myRis.Credentials = new NetworkCredential("CCMAdministrator", "passwrod");
ServicePointManager.Expect100Continue = false;
myRis.SoapVersion = System.Web.Services.Protocols.SoapProtocolVersion.Soap11;
CM5WebReference.CmSelectionCriteria cmSelection = new CM5WebReference.CmSelectionCriteria();
string stateInfo = ""; //is null? or....
csc.Class = "Any";
csc.Status = "Any";
csc.SelectBy = "Name";
CM5WebReference.SelectItem selectit = new CM5WebReference.SelectItem();
selectit.Item = "AppIpAddr";
CM5WebReference.SelectItem si = new CM5WebReference.SelectItem();
si.Item = "Name";
CM5WebReference.SelectItem[] sis = new CM5WebReference.SelectItem[2] { selectit,si };
csc.SelectItems = sis;
CM5WebReference.SelectCmDeviceResult a = myRis.SelectCmDevice(ref stateInfo, csc);
cmselectCri.SelectBy = "Name";
cmselectCri.Class = "Any";
if (a.CmNodes != null) //always null,it's so strange...
CM5WebReference.CmNode[] cn = a.CmNodes;
CM5WebReference.CmDevice[] cd = cn[0].CmDevices;
string ip = cd[0].IpAddress;
my entironment:
CM 5.0.4.1000-1
vs2005(C#)
Maybe you are looking for
-
My IPhone 5, was backed up and restored. Music doesn't sync, when reconnecting device each time, it only offers restore or new phone rather than sync option. I have reinstalled ITunes but still this hasn't worked. Can anyone help please?
-
Logic Will Randomly Lose Phantom Power
I have an Apogee One running into Logic Studio 9. On the Apogee One, I am running and XLR cable to an Apex Microphone, and a 1/4" cable to a guitar (At Different times). When recording either the Guitar, but most commonly with the Phantom Power on th
-
What is the difference between Statement and PreparedStatement
Hi What is the difference between Stement and PrepareStatement Other than PreCompilation and dynamic Parameters? Thanks in advance. Sekhar
-
I have Acrobat XI on PC. After trying to convert a webpage to PDF, I received a Fatal Error message indicating that "Acrobat failed to connect to a DDE Server." Now, the program will not open. How do I regain access to the program?
-
Use CW to shutdown unused ports?
Is there a way to have CW (LMS 3.2) shutdown ports that have been inactive for X number of days? I know Campus Manager has the "Reclaim Unused ports UP" where I can enter a number of days and it will give me a list of all the ports that have been unu