X freeze with NVRM: Xid 8 and 13 error, help.

My hardware: Nvidia Gtx 275, Core i7 920, ASUS P6T, OCZ Gold 6G ram.
I was using my Archlinux surfing the web, suddenly it become very slow and choppy, while the screen start looking funny. It doen't really hang, but freeze for a few second and come back, then freeze a few second again. I struggled to open top finding nothing is using the CPU, 0% uasage. Since it is not usable, I have to reboot.
Here is the message found from /var/log/error.log, after reoboot:
Oct 3 10:18:37 home kernel: NVRM: Xid (0002:00): 8, Channel 00000001
Oct 3 10:19:43 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 00008397 0000194c 00000000 00000100
Oct 3 10:19:43 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 00008397 0000194c 00000000 00000100
Oct 3 10:19:43 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 00008397 0000194c 00000000 00000100
Oct 3 10:19:49 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 00008397 0000194c 00000000 00000100
Oct 3 10:19:49 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 00008397 0000194c 00000000 00000100
Oct 3 10:19:49 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 0000502d 0000024c 0000000c 00000040
Oct 3 10:19:49 home kernel: NVRM: Xid (0002:00): 13, 0001 00000000 00008397 0000194c 00000000 00000100
I googled for a while, it seems it is a fairly comment problem before, but I could find any thing conclusive. Can any one shed some light for me?
Thanks.
Update: I am sure that it is not a temperature problem.
Last edited by mark.altern (2009-10-03 16:45:51)

I've got a similar problem with an old Dell Optiplex equipped with an Intel 845G integrated video adapter. Stock Kernel 2.6.34-ARCH is installed, along with xorg-server 1.8.1-902-1, and xf86-intel-video 2.11.0-2.
However instead of flickering the screen, or freezing for a split second or two, my screen just locks up completely. It occurs randomly at any time using any program (even just an xterm), but most frequently after the computer has been on for about an hour or two. Subsequent attempts to start X just ends up leaving me with a black screen and a moveable mouse cursor. The only way I can get back into X at all is to reboot the computer.
Also oddly enough, this problem appears less often without any xorg.conf file than it does when I have even the most basic xorg.conf file.
Update: the latest intel video driver (xf86-video-intel 2.12.0) from upstream freedesktop.org sources limits the freeze up and gpu hang errors for me. The only time they crop up is in special instances of using sdl or other 3D related operations.
Last edited by carbonero (2010-07-07 00:32:52)

Similar Messages

I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

I am going on the guess that an old driver is still installed...
Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
Reset the Printing System:
OS X Mavericks: Reset the printing system
Now, Add the printer in Print & Scan prefs.

Mavericks freezing with spinning symbol and strange screen after forcing restart

Hi,
My Mac has freezed (or almost that) and showed the spinning symbol (in gray). I couldn't use, so I forced the restart.
After that, I've received a strange screen that I've never seen in my life, with a folder and a "?" inside it:
I noticed that the freeze happened exactly at the same time my Internet connection got lost, because my Apple TV has also stopped (but not freezed).
I've been experiencing problems with Mavericks since the begining ( https://discussions.apple.com/thread/5836640 ), and I'm seriously considering downgranding to ML.
I'll appreciate any help on this. Thank you so much.

Spinning Beach Ball
Spinning Beach ball (2)
Check Activity Monitor for processes hogging CPU/memory.
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes

My screen is freezing with broken pixels and lines

iMac i7 2.93Ghz 12gb DDR3 memory Running 10.7.5. Start Up Disc Lion HD
The issue appears to be random. Started a couple of months ago. The screen starts to freeze, mouse no longer works and unable to force quit apps or shut down normally and appears pixelated with various lines across the screen.
I can t say what triggers it and it seems to happen even when just a few minor apps are open like mail and Firefox.
The computer does seem to run hot and starts to work harder it seems.
The only way to resolve the freeze up is to hard shut down then pull the plug out of the power on wall and use the Pram key strokes to reboot. If I don't zap the pram or remove the power plug it wont re start.
Hopefully I can attach a picture here.
Any info as to how to fix would be happilly recieved
Jackie

Pretty much have the same problem! Everything work, but always got the pixels blinking all over the screen, until the whole computer freeze (or at least the screen) and I have to reboot it. I can reboot with the button and my gear works (mouse etc) Had to buy a new mouse recently though. Don't know if it has anything to do with the comp.
The comp seems to work way better in games (Heroes of Newerth) where the pixels are all gone. The comp. also seems to be a bit slower than usual overall, thinking at random.
iMac i7 2.93Ghz 8gb DDR3 memory Running 10.10.2
I am about to buy new graphic card. Would appreciate some help before that to confirm whats wrong.

Screen freeze with odd squares and occasional crashing

I've had my new IMac 27" (2.66 Ghz i5) for a couple of weeks and it's crashed more times than Windows Vista ever did (about 7 times so far). Every now and again, the screen freezes (sound keeps going) and strange squares appear. The only solution is to hard reboot using the on/off switch.
Today it had trouble starting up again, requiring 2 or 3 goes before coming back to life.
Help! Any suggestions/fixes? Is this a common problem?

Thanks for this. Just taken a look at the Console log and the following is listed at the time of the latest crash:
07/04/2010 10:54:11 Safari[5200] * __NSAutoreleaseNoPool(): Object 0x10061fc40 of class NSCFString autoreleased with no pool in place - just leaking
07/04/2010 10:54:11 Safari[5200] * __NSAutoreleaseNoPool(): Object 0x100620140 of class NSURL autoreleased with no pool in place - just leaking
07/04/2010 10:54:11 Safari[5200] * __NSAutoreleaseNoPool(): Object 0x100620180 of class NSURLRequest autoreleased with no pool in place - just leaking
07/04/2010 10:54:11 Safari[5200] * __NSAutoreleaseNoPool(): Object 0x100616c20 of class NSCFString autoreleased with no pool in place - just leaking
07/04/2010 10:54:11 Safari[5200] * __NSAutoreleaseNoPool(): Object 0x100622c20 of class NSCFString autoreleased with no pool in place - just leaking
07/04/2010 10:54:11 Safari[5200] * __NSAutoreleaseNoPool(): Object 0x1006169a0 of class NSCFString autoreleased with no pool in place - just leaking
07/04/2010 10:54:11 Safari[5200] * __NSAutoreleaseNoPool(): Object 0x1006181b0 of class NSCFString autoreleased with no pool in place - just leaking
07/04/2010 10:54:14 Safari[5200] * __NSAutoreleaseNoPool(): Object 0x100613b60 of class NSHTTPURLResponse autoreleased with no pool in place - just leaking
07/04/2010 10:54:14 Safari[5200] * __NSAutoreleaseNoPool(): Object 0x10061e370 of class NSCFData autoreleased with no pool in place - just leaking
No idea what all of this means, but it sure doesn't sound too good. Can anyone shed any light?

Startup screen freezes with vertical lines and a restart message

So this problem just started a couple of days ago it seems to be getting worse. Occasionally it will start-up but not often and at the moment it won't, I just keep getting this screen on start-up: http://www.flickr.com/photos/42697060@N04/3933706005/ and http://www.flickr.com/photos/42697060@N04/3934486754/
Not sure if this is the same problem people are having with the video card or not. Thanks for the help!

I'm getting the same look, with all kinds of squares and lines on screen, although mine starts while the computer is running with color reversals and lines on the working space. Then I get a freeze and have to do a hard re-start with the power button, and finally, what you're seeing. I did notice that when I unplugged the power adaptor, the problem has gone away, at least for the past 30 minutes or so.
I originally thought it was overheating, since if I shut it down and left it, it would re-start normally after 15 minutes, but crash again in 10 minutes of running. Then I came here, and read about the video card. That could be, but why only when plugged into the power adaptor? The power adaptor has been acting up lately, in that the light is sometimes off, sometimes amber when screen shows 100%, like that.
I'll plug back and in and see what happens, and put it here. 4:53 PM Saturday.
I'll keep fooling around with it, and report back here. I'll also make an appointment for next week with the nearest Apple store - 1.5 hour drive. Grrrr. I'm home with the flu this weekend. I'm tempted to go now and shake everyone's hand.

MSI K9A2CF-F freezes with MSI NX8400GT and NX8500GT

Hi, all
I've a brand new mainboard K9A2CF-F with an AMD Phenom 9500 and a NX8400GR video card. Windows is running fine but when using 3D the machine freezes, sometimes it also freezes with 2D activities. Today I changed the card for a NX8500GT-TD512Eh but I've got the same problem. When I put a Ge-force 6200 in my computer the machine runs fine but this card is pretty slow.
Things I did, reinstalled windows, latest updates, latest nvidia driver, bios upgrade to v1.2, vga bios was allready the latest, changes psu with a heavier one.
Now i've got the vga card in the second pcie slot and strange enough the computer is running now for almost 30 minutes. Maybe is it something with running at 16x. But what could this be that the machine crashes at 16x?

Can it be the PSU? It's now running the whole evening in the PCIe 8x slot without any crash. Is it consuming more power when running at 16x speed bus?
First tested PSU is an Mtek 350Watt.
3V = 14A
5V = 30A
12V = 15A
The other one is an SumVision 400W
3.3V = 26A
5V = 30A
12V = 15A
They indeed have the same 12V current of 15A.
At the moment in the machine
1x MSI K9A2CF with Pehnom 9500 (bios in fail safe settings)
1x MSI NX8500GT
1x DDR PC6400 2GB
1x SATA2 harddrive
1x DVD player
1x casefan
at last i'm running dual screens but it also freezes when running a single monitor

90 yr olds with NO service and no help since Augus...

Hi, I hope someone from BT will pick this up as I am disgusted with the service, I have tried to complain via India, but I either get " the Manager is not available", "someone will call you back" (never do) or put through to a line that never picks up.
This Started back in June 2012, my parents were moving from their house in Chichester to live near us in Purley. Brand new flat in block of 12 flats (there is one other resident in the block). My parents were with TalkTalk, so they arranged with TT for a line and Broadband to be installed at the new flat when they moved in, an appointment made for 28th August 2012. Didn't show, chased TT never got a proper answer and no update. Cancelled the TT request.
Ordered line and Broadband through BT on 4th September 2012, with first engineer date of 2nd October 2012. Didn't show, spoke to BT and was told that it would be remade for 24th Oct 2012. Engineer did come but found that although the block was wired for connection, from the flat to the basement (where a terminal block was housed) the cable to the BT network only had 2 lines. (How the original Openreach engineer thought a block of 12 flats with a lift only needed 2 lines is beyond me).
Told by BT that a new appointment would be made for November, no show, then 18th December, no show, then 15th January. In all these calls I feel I have been as civil as possible with people in India, I had been thinking that it was not really their fault, but I must say they are not trustworthy or helpful. I presume they are penalised in some way for not being able to deal with a call and having to pass to a manager or deal with a complaint, because they basically won't pass on a complaint.
I have even spoken to the Council road works depatment, because I was told that Openreach would need to have traffic signalling to lay the new cable, but the council say they have never heard from openreach about it.
In preparation for the 15th January I called yesterday and was told to my utter amazement that the order had been cancelled!. I asked who by and was told by us! When I said when they told me September? Again the lady in India (namerd Lucky) said she would take personal responsibility for resolving the issue and would call back in 24 hours (checked they would ring on Saturady). No call, rang again on 4 occasions today, getting nowhere, last call said can't do anything because there is not an order active.
I will have to go to a BT office and ask to complain to someone directly.
90 year old parents still living on thier own, without connection to the outside world and no help from BT at all.
Digusted.
Solved!
Go to Solution.

Welcome to this forum.
This is a customer to customer forum only, where forum members, who are only BT customers, can help each other with BT Retail products and services.
Anything you post here does not go to BT. Although the forum is moderated by BT, not all posts are read.
Customer service guarantee
Free Priority Repair Scheme information (pdf file)
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Macbook Pro Freezes with Screen Distortion and other problems...

So I've had my 13' Macbook Pro for about 9 months and I am encountering problems with it. My Macbook would sometimes freeze at random and the screen would distort as well, also, the screen would react whenever I would move the laptop around by either reverting back to a normal screen (still frozen) or more distortion which leads me to believe that it might have something to do with the hardware. But all this is temporarily solved when I force shut off my laptop (hold the power button for 3 seconds) and restart it. It can start up again with no problem, but this happens again, more early than usual and becomes more consatnt. However this is lessened whenever I don't use my laptop for an extended amount of time, but it does happens again whenever I do use it for some time.
Another problem I've been encountering is that, at times after I force shut off the laptop, my computer would not turn back on. Instead, the laptop beeps 3 times, pause, then beep 3 times again. I have looked into this and discovered that this means that I have "No Good Banks"..........I have no idea what this means but I guess it means that I might have faulty RAM.
What I ask is that if anyone has had similar problems and if they know what to do or what exactly what the problem is so that I might be able to do something about it.
Info about Macbook:
Processor 2.5 GHz Intel Core i5
Memory: 4GB 1600 Mhz DDR3

Bump. Anyone have any ideas on this?
I "shut it off" last night, but when I turned it on again tomorrow, it turned out it didn't quite shut down?
It booted to the grey log-in screen, basically.
I've also come to the realisation that my charger isn't registered (the LED isn't orange/green like it usually is), and I can't get a "battery status" (I'm sure it has another name, I just don't know what it is) when I click on the little button on the left hand side of the laptop. Usually, it would show green dots/LEDS to tell me how far along it's charged, but now I get nothing.
I get the distinct feeling something's up with my battery, and maybe my RAM (because of the repeated triple beep after shutting down last night).

Hangs and freezes with low CPU and RAM load.

I have a Macbook Pro (13 inch mid 2012) and I have an issue with slow responses and hangs, especially when using Finder. I have done all of the software troubleshooting that I can think of including Disk Utility (verify and fix permissions, verify and repair disk). I’ve tried safe boot and AHT. All returned a healthy result, but the hangs still continued. The CPU load is less than 5% during these hangs and the RAM pressure is low. There is 100+ GBs of free space on the Hard Drive.
I used Time Machine to backup my data and I went to the Genius Bar. The representative concluded that it was a bad Hard Drive despite the results from the before mention Disk Utility. I thanked him and decided to install a new 840 EVO SSD myself.
I booted using the External Hard Drive that contained my Time Machine backup. I formatted and partitioned the SSD using GUID and Extended Journal. I selected to restore the Time Machine backup, but it failed. I do not remember the details of the restore failure since it occurred at 2 a.m. Frustrated, I decided to do a fresh install of Mavericks and restore my data using Migration Assistant at a later date.
Now I have a new SSD and a freshly installed OS and the problem is the same. What else could be the cause of these hangs and beach balls? A faulty SATA cord? Faulty Logic Board?
Thank you for your time.

If the only thing that you have installed on the SSD is the OSX and NOTHING else, then that indicates a hardware problem. Run the Apple Hardware Test, twice if you have the patience - the extended version. Note an error free AHT is not definitive.
Reset the SMC and the NVRAM:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
As a matter of procedure I also would boot into the recovery partition and run Disk Utility>First Aid, Verify, Repair and Permissions.
If there is no change, then another appointment at an Apple store genius bar will have to be scheduled.
I know that much if this is what you have already done, but the point here is to clearly eliminate as many possibilities before a genius bar appointment so that they can focus on other potential problem areas.
I am assuming this is a consistent and constant situation that will be repeated at an Apple store. If it is intermittent, that can be most difficult to diagnose.
Ciao.

Whilst online what I am looking freezes with a box and message that plug-in has crashed and do I wish to stop it or continue. How can I resolve this issue ?

Can I have help with solving a plug-in issue. My screen regularly freezes with this problem

No. I have since installed update to Flash player. Have not had a chance to test if it has helped. Will get back to you if I still need help. Many thanks.

Numerous problems with X1 platform and error message RDK-03032

Daily I have problem with the X1 system where the TV signal goes out and I get a message that says " Call 1-800-XFINITY and reference RDK-03032." This problem is randum and can occur at any time of day, resulting in outages for many hours, or usually the remainder of the day. If I call Comcast customer service, usually the wait is usually about 20 minutes before someone comes on and goes through another process of sending signals to my box, at which time they say they need to send a technician out. I then get a call from the technician who says he doesn't need to come out because the problem is with XFINITY's network, and that they are working on it. If I call back into customer service, I need to first make sure I have about an hour for the process because the customer support person has to go through the same diagnostic test of sending signals to confirm the system is down, before they will refer the problem back to a technician in the field. Usually during this diagnostic process, the technician puts me on hold for another 30 minutes, at which time the phone is hung up, at which time I have to start the process all over again. RDK-03032 problem continues to occur with no resolution and no one seems to be able to tell me what the problem is, or how to fix it, and no one in customer support knows how to fix this problem. I have no idea how to get this problem resolved. Does anyone have any idea?

awsomely sad / they put this item on the market and i would recomemmend you contact the fcc for a form to fill out a complaint asap as i will be doing as soon as i receive the letter in the mail , they say it is a latency problem . late is late but no show at all for hours on end is the new future. what is that suppossed to keep us victoms happy untill they can figure out what to do to cover theyre mistakes , now they are trying to replace the incoming signal which has left me with no services 10 times in 14 days , i watched a tech install a new cable from pole to house with 2 supervisors standing rigth there , when the 12th visit by a tech i explained my story and the tech said let me look out side 1 hour later after my services were cut off again the tech came to my door and told me the cable from my house to the pole was terrible and rotten and needed to be replaced again , i knew he was lying but it was after 7 pm and i had enough , i saw them a week or so before , as did the 2 supervisors , cut a brand new peice of the roll in his truck replace it with new ends , a totally new peice , so i guess the cable they are using only has a 2 week life expectancy or the tech was lying , which i beleive the tech wanted to get paid for the call , so he probably did but once again my xi service is not right still , when they get to far in they start lying because they are probably getting screwed for have to service this x1 numerous times , when i sit here and listen to the supervisors and techs tell me that the system is the problem and they are trying every 3 months to figure what the last program upgrade has screwed up for them and laugh jokingly it doesent give you to much faith in theyre ability to resolve any issues with this system face it we have no recoarse . over 200 hrs on the phone . i must have talked to every employee in the company even tom karinshank yhe ceo was contacted and after his rep sat there and picked appart evry thing i said got rude and now wont return my calls or emails they pass it to the next person , ????????????????????????????????????

Need Help with Backup code and error

Hi ,
I am having trouble working out why the backup from a site i maintain has suddenly started failing. As i am a newby to Java and did create the site i am a bit stumped. From what i can tell it appears that the database connection fails.
The backup used to work fine to around a month ago.
Exception error below:
Exception Occurance Date: 29/9/2007
Exception Occurance Time: 9:0.23
java.sql.SQLException: JZ006: Caught IOException: java.net.ConnectException: Connection timed out: connect
     at com.sybase.jdbc2.jdbc.ErrorMessage.raiseError(ErrorMessage.java:487)
     at com.sybase.jdbc2.jdbc.ErrorMessage.raiseErrorCheckDead(ErrorMessage.java:723)
     at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:3071)
     at com.sybase.jdbc2.tds.Tds.login(Tds.java:394)
     at com.sybase.jdbc2.jdbc.SybConnection.tryLogin(SybConnection.java:218)
     at com.sybase.jdbc2.jdbc.SybConnection.regularConnect(SybConnection.java:195)
     at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:174)
     at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:126)
     at com.sybase.jdbc2.jdbc.SybDriver.connect(SybDriver.java:179)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at database.SybaseConnection.createDatabaseConnection(SybaseConnection.java:76)
     at database.SybaseConnection.<init>(SybaseConnection.java:21)
     at database.DatabaseManager.aries(DatabaseManager.java:235)
     at Translog.execute(Translog.java:50)
     at Translog.<init>(Translog.java:23)
     at Translog.main(Translog.java:112)
Anyone with any suggestions?

Hi ,
I am having trouble working out why the backup from a site i maintain has suddenly started failing. As i am a newby to Java and did create the site i am a bit stumped. From what i can tell it appears that the database connection fails.
The backup used to work fine to around a month ago.
Exception error below:
Exception Occurance Date: 29/9/2007
Exception Occurance Time: 9:0.23
java.sql.SQLException: JZ006: Caught IOException: java.net.ConnectException: Connection timed out: connect
     at com.sybase.jdbc2.jdbc.ErrorMessage.raiseError(ErrorMessage.java:487)
     at com.sybase.jdbc2.jdbc.ErrorMessage.raiseErrorCheckDead(ErrorMessage.java:723)
     at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:3071)
     at com.sybase.jdbc2.tds.Tds.login(Tds.java:394)
     at com.sybase.jdbc2.jdbc.SybConnection.tryLogin(SybConnection.java:218)
     at com.sybase.jdbc2.jdbc.SybConnection.regularConnect(SybConnection.java:195)
     at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:174)
     at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:126)
     at com.sybase.jdbc2.jdbc.SybDriver.connect(SybDriver.java:179)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at database.SybaseConnection.createDatabaseConnection(SybaseConnection.java:76)
     at database.SybaseConnection.<init>(SybaseConnection.java:21)
     at database.DatabaseManager.aries(DatabaseManager.java:235)
     at Translog.execute(Translog.java:50)
     at Translog.<init>(Translog.java:23)
     at Translog.main(Translog.java:112)
Anyone with any suggestions?

Random display freeze, with strange colors and screeching noises

True story. My (totally new) MacBook freezes 3-4 times a day, with lots weird colors and screeching noises. I've added photos of this phenomena on Flickr, here:
http://www.flickr.com/photos/photomaton/3433889119/
http://www.flickr.com/photos/photomaton/3434685366/
Couple of stuff about this machine:
- Sometimes the noises are muted; but the images speak for themselves.
- I installed 4GB memory. It was done by a pro.
- This mostly happens when I connect an external display and/or use VMWare. But it also happens from time to time, with no external display, and no VMWare running.
Help.
Please: Help.

so the problem lies with the graphics card or the RAM? because i had a ram upgrade to 4gb ram as well.
my mac went for 3 days w/o error until today and i opened up the console and this the error i saw.
4/15/09 10:06:41 PM quicklookd[102] EXCEPTION CPZEndOfCentralDirectoryError: Could not find the end of central directory record
4/15/09 10:06:41 PM quicklookd[102] EXCEPTION CPZEndOfCentralDirectoryError: Could not find the end of central directory record
4/15/09 10:06:41 PM quicklookd[102] EXCEPTION CPZEndOfCentralDirectoryError: Could not find the end of central directory record
4/15/09 10:06:41 PM quicklookd[102] * +[NSCalendarDate iso8601DateWithString:]: unrecognized selector sent to class 0xa0686ce0
4/15/09 10:06:41 PM quicklookd[102] EXCEPTION NSInvalidArgumentException: * +[NSCalendarDate iso8601DateWithString:]: unrecognized selector sent to class 0xa0686ce0
anyone got any idea wad it means? and yeah my mac screeches like a banshee

Tour Sync Issues with Outlook 2003 and Error Code 0x8004fceb

Hello, I have a Tour with DM 5.0, which I sync with Outlook 2003 on my laptop running Vista O/S. I am having a problem deleting items from the Tour that I've previously added via a sync with Outlook.
Some time after syncing, I delete the items from Outlook and then re-sync. Instead of deleting from BB, the changes dialog box tells me the items are going to be added from the device to Outlook!!! If I accept changes so that other calendar items will update (from Outlook to BB), Outlook remains fine, but the items do not delete from BB.
Additionally, existing items on BB are duplicated on the BB during sync. In other words, I have ended up with 7 entries for one appointment on the BB even though there's only one in Outlook. This primarily happens with recurring appointments.
Lastly, despite all this confusion, the sync ends with Error Code 0x8004fceb; check documentation, which I cannot locate on blackberry.com.
I am set up for two-way sync, future items only. I even reset to one-way sync from calendar to device to no avail.
Please help.
Thank you.

Sorry. I guess I needed to be clearer I have Office SP 2.
I will tell you that I currently running an older version of iTunes (7.3) because that is the only one that syncs.
In the newest version of iTunes (and of course the current one) it does give me the option to sync with outlook.
Message was edited by: obxbound

X freeze with NVRM: Xid 8 and 13 error, help.

Similar Messages

Maybe you are looking for