X-Grid Works for one second then says it's finished

OK, so when I use the command line to submit an X-Grid job, it submits it, but it runs for one second then returns that it's finished. I look at the X-Grid Admin utility which is connected to my X-Serve, and it shows the job, shows that it's completed, and shows that it ran for one second... It doesn't matter what job I send to it...
Here's the command I used:
"xgrid -h rtsp.jnetcast.net -p <password hidden> -job submit catmovie /Use
rs/chris/Public/xgrid/movie.mov /Users/chris/Public/xgrid/movie2.mov -mp4 -o /U
sers/chris/Public/xgrid/movieout.mp4"
The path that all of those files are in has RW privileges for all users, so it's not that...
Anyone know how to get it to work?

Sorry, I don't have an answer - but there is an actual xgrid discussion board. You probably have a much better chance of finding an xgrid guru there than here.
http://discussions.apple.com/forum.jspa?forumID=722
My $.02,
=Tod

Similar Messages

Monitor works for one second, then blank

I have been reading many of the post people have put down about monitors and mac mini's, however can't find anyone with my problem.
I bought a mac mini and a cheap monitor from PC world, a Xerox 17" TFT, thinking that it would work fine. However when I connected them up using the DVI cable, at start up the monitor works for a second then blank. Turning it off and back on again brings the image back but again for just a second. This is annoying in that the mac mini is still in its welcome first run making it difficult to get beyond it to mess around with the monitor settings given a window of a second each time.
There was an adaptor that came with the monitor, but to use that I would have to plug that adaptor into the macs DVI adaptor as well, something I tryed but no luck, in fact no image at all.
Has anyone else had this problem?

I've had this problem too, resetting the PMU and PRAM usually helps:
http://docs.info.apple.com/article.html?artnum=300574
http://docs.info.apple.com/article.html?artnum=2238
Mario
Mac Mini Mac OS X (10.4.6) Core Duo / 2GB

Photobooth works for one second, then stops.

It used to work. Like all the time.
I'm using a Logitech camera, which works fine in Skype and iChat. But when I open Photobooth, the camera turns on, works for a period of one second, then it stops. If Photobooth is open but behind another program, when I switch back to Photobooth I get a quick one second refresh of the image before it freezes up again.
When I Apple-T, I get the 3-2-1 countdown, then it takes a picture of the frozen image and adds it to the previous photos.
The camera is plugged into a USB 2.0 card I installed last year. Everything else on the card is working. I've even switched ports around, and everything is working (which makes sense, because the camera works in Skype and iChat.)
I was hoping to use the video function to record some voiceover stuff and then transfer the audio into iMovie.

I would try Repair Permissions.
This is done with Disk Utility found in Applications/Utilities using the First AID tab.
If that does not work I would Reset the PRAM
Hold down AppleALT+PR keys on restart until you have three start up bongs.
If that does not work I would download and install the Combo Installer of the OS level you are up to.
10.5.6 COMBO is here
9:00 PM Thursday; February 26, 2009

I have no idea what my pocket has apparently downloaded today while I was at work but I now can't here any tones on my iPhone 4...has this happened to anyone ive tried restarting it and it worked for a second then a thing popped up on my screen and notgin

I have no idea what my pocket has apparently downloaded today while I was at work but I now can't here any tones on my iPhone 4...has this happened to anyone ive tried restarting it and it worked for a second then a thing popped up on my screen and nothing again

Ok mate no need to talk to me like im a complete idiot, and no it is not on silent im not that stupid. There is a message pop up on my screen saying 'this accessory is not optimized for this iPhone' and underneith 'you may experience noise caused by cellular interference and a decrease in cellular signal strength' and under that only one option to press which says dismiss. I cant find anything in my settings or applications and have tried resetting my phone 3 times and still nothing only plays ringtones ever now and then wont play music from ipod, youtube or other applications.

I did the recent update on my ipad 7.0.4 and now it keeps freezing up and can not use it. Tried reboot and works for a second then freezes right up again. Anyone else have this issue or know a fix?

I did the recent update on my ipad 7.0.4 and now it keeps freezing up and can not use it. Tried reboot and works for a second then freezes right up again. Anyone else have this issue or know a fix?

Madmonkey,
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Gaylefromnewhope,
Seems like you tried this all ready and it didn't help.
Next might be to reset all settings.
Settings > General > Reset > Reset all Settings
Note that when you do this you will not lose data but you will have to enter all passwords again.
If that doesn't help you might tries a restore of your iPad using iTunes on the computer you normall sync with. Do a backup and save all data first. Or
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

When I click on safari button a blank safari screen comes up for one second then minimizes. can't use safari?

When I click on the safari button a blank screen comes up for about one second, then minimizes. I have checked wi-fi connection, and all is fine. Facebook and maps apps still work.

Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

"Reader" will only display a PDF for one second, then suts down the PDF.

I recently had an automatic update to "Reader" and now "Reader" will only display a PDF for about one second, then shuts down the PDF. This happens to all PDFs no matter what the scource. I am running Windows 7. What do I need to do to correct the situation. (Yes -- I deleted "Reader" from my computer, the re-installed it. Didn't help.)

Go to C/Programs/Adobe/Reader 11/Reader.
Look for a file named eula.exe (or just eula).
Double click it.
Accept the license agreement.
Reader should work fine from there.

Console Window keeps popping up for one second then vanishes before I can read it

a console window (with white letters on a black background) keeps popping up for 1 second and then vanishes before i have time to read it - How can i
stop that, or how can i capture what is written on the console before it disappears (so that I can troubleshoot it)?
I use as x64-bit Windows 8 pro Lenovo T430s.
Thanks in advance,

Thanks Andre,
I ran ProcMon and went to the ProcessTree window, but could not find any cmd.exe there (and hence could not see the commandline). (I also watched the video about ProcMon).
The closest I could find in the ProcessTree window was conhost.exe, with commandline showing:
\??\C:\windows\system32\conhost.exe 0x4
I saved the capture trace, at:
http://sdrv.ms/14Dfvjs
Do you see any other leads in there that I could work on?
In the result column, I noticed some "buffer overflow" and "name not found", many associated with "tunmgr.exe" the Blackberry Link Communications Manager.
I also noticed that in the ProcessTree Window, the only two process lines with an End Time are tunmgr.exe and conhost.exe.
the respective command lines are:
for tunmgr.exe:
"C:\Program Files (x86)\Common Files\Research In Motion\Tunnel Manager\tunmgr.exe" -Embedding"
for conhost.exe:
\??\C:\Windows\system32\conhost.exe 0xffffffff
- could that be it?
If so, how could one fix that ?

Hi I had lightroom 4 on windows 8. I get a message saying I can't open LR as it is already open in a different catalog. There is no other catalog. Rebooting hasn't worked & I installed 4.4. It worked for one day then I got the same message. I uninstalled

Hi I have lr 4 on a windows 8 computer. I keep getting an error message when I try to open LR. It states that the catalog is already open in a different location, close this, then try to open lr. I have tried re booting, opening a new catalog, upgrading to 4.4, removed 4.4 & still get the same message. Please help!!!

Try going to your lightroom folder (the default is usually inside Pictures or My pictures) where the catalog is located. Don’t touch any .lrcat files but if you see a similar file with the word Lock, you can delete it. Then try launching Lightroom.

When i use facetime with a friend, it works for 5 seconds then both screens freeze. How do i get it to work correctly?

We can hear each other but the screens are not working. Both of our macbook pro's are brand new

We can hear each other but the screens are not working. Both of our macbook pro's are brand new

Homehub 4 only works for 45 seconds

New account with BT. Phone and homehub connected to master socket and phone works OK. Homehub works for 45 seconds then flashes red. Tried everything, download help software, talked to BT help line who went through switch off, reconnect, is it a master socket etc and then said see what it is like in 48 hours!
What do I now do to get the service I have paid for. And yes it is. On necked via a filter
Solved!
Go to Solution.

OK an update of my experience of BT Just spent 2 hours 23 minutes on the BT helpline. The operator tried to help but to no avail. It took 30 minutes to get them to accept that I didn't have a Homehub 2 (I have a homehub 4) and I am not on Infinity (normal broadband). I was walked through switch off/on, reboot, paperclip reset, dimantled master socket and use test socket etc. Still all I get is a flashing amber horizontal light (power light) and every 30 seconds a flashing red broadband light.
The conclusion was it is a wiring fault in my property - which confuses me as I am connected to the test socket, before which is all BT wiring?
No mention of possible Homehub fault.
Engineer booked for Monday and I will be charged £130.
One question - as the BT system says I have a Homehub2 with Infinity, if I am getting this sent from the exchange would this cause the errors I am getting on the homehub 4?

Before sound computer freezes for one second

Ive installed kdemod-vanilla full package, and before sound event (question sound for example) computer freezes for one second, then after that second it returns and i hear sound. this only hapens before sound. im using alsa. please help me, because this annoyes me much!

Ive found that problem is with kmix, when kmix is not running then before sound mouse dont freezes for a second, but when i run kmix then it freezes. But i really need kmix, so i cant turn off it. any ideas?

When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening

When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening

Tried the un-install and getting the same problem although it takes a bit longer before it crashes this time. Checked the problem report and it looks the same as the previous reports.
Problem signature
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.2.1.1
Application Timestamp:          4d756476
Fault Module Name:          MediaToolbox.dll
Fault Module Version:          1.0.694.3
Fault Module Timestamp:          4d4d9a00
Exception Code:          c0000005
Exception Offset:          0034a672
OS Version:          6.0.6002.2.2.0.768.3
Locale ID:          2057
Additional Information 1:          fd00
Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
Additional Information 3:          fd00
Additional Information 4:          ea6f5fe8924aaa756324d57f87834160

My apps on my iPod touch only open for a second then close, I tried the reset option of holding down the power button for ten seconds still no apps that I have down loaded will open just the one that are on the iPod like music app store whether time etc.

My apps on my I pod touch will not open. They start to load for one second close down. I tried holding down the power button to reset it. And that didn't work. Is the only option is to delete all apps and then reload them?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPod. Again, say "yes."

Bought new charger: Says it charging for a second then goes away.

I just got a new charger for my laptop after my last one broke and I plug it in and it says it is charging for a second then the charging icon goes away like its not working anymore? I have no idea what to do because I am sure the same will happen if I bought another charger.

Hi MSginobili20,
Welcome to the HP Forums! Was the original charger doing the same thing as the new one? It could be the battery that is causing the problem. Start with a Hard Reset and if that doesn't work then we will run a hardware test on the battery. For that I will need your operating system and your product number, please.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

X-Grid Works for one second then says it's finished

Similar Messages

Maybe you are looking for