X issues - no xrandr scale after Xorg update (MBP Retina)

Hi,
I just did a full update (2014-08-16) through pacman, which included an Xorg server update (1.15.2-1 -> 1.16.0-6). My previous full update had been just over a month ago (2014-07-08).
On logging in, KDE basically was running incredibly slowly (ie: clicking the KMenu button would only result in it opening after a few minutes, and this would get no quicker as time went on - it was basically unusable). Moving out my .kde4 directory and letting it be recreated solved this (I haven't had a chance to go through and work out exactly what setting was causing the issue yet).
More importantly. because this is on a MacBook Retina Pro (MacBookPro10,x) - I need to be able to scale the screen to make everything appear at reasonable sizes.
Previously I had an xrandr script running on startup which just ran "xrandr --output eDP-1 --scale 0.666667x0.666667" - which was a good size to view everything at.
The problem is now everytime I run xrandr --scale, the screen goes blank (slightly grey colour) - and I am unable to restore it (even ctrl+alt+F1 doesn't work to get to a console) - resulting in a hard reboot.
I've tried downgrading all of the X related components to the versions I had pre the upgrade, but I still have the same issue...
[2014-08-16 16:13] [PACMAN] downgraded xf86-input-evdev (2.9.0-2 -> 2.9.0-1)
[2014-08-16 16:13] [PACMAN] downgraded xorg-server (1.16.0-6 -> 1.15.2-1)
[2014-08-16 16:20] [PACMAN] downgraded xf86-input-synaptics (1.8.0-2 -> 1.8.0-1)
[2014-08-16 16:40] [PACMAN] downgraded xorg-xkbcomp (1.2.4-2 -> 1.2.4-1)
[2014-08-16 16:41] [PACMAN] downgraded xorg-server-common (1.16.0-6 -> 1.15.1-1)
[2014-08-16 16:42] [PACMAN] downgraded xorg-server-devel (1.16.0-6 -> 1.15.2-1)
[2014-08-16 16:43] [PACMAN] downgraded nvidia-utils (340.32-1 -> 337.25-3)
[2014-08-16 16:43] [PACMAN] downgraded xorg-xrandr (1.4.3-1 -> 1.4.2-1)
[2014-08-16 16:43] [PACMAN] downgraded xorg-twm (1.0.8-3 -> 1.0.8-1)
[2014-08-16 16:46] [PACMAN] downgraded mesa (10.2.5-1 -> 10.2.2-1)
[2014-08-16 16:46] [PACMAN] downgraded mesa-libgl (10.2.5-1 -> 10.2.2-1)
[2014-08-16 16:46] [PACMAN] downgraded lib32-mesa (10.2.5-1 -> 10.2.2-1)
[2014-08-16 16:46] [PACMAN] downgraded nouveau-dri (10.2.5-1 -> 10.2.2-1)
Any ideas what the next troubleshooting steps would be? I'm using the Nouveau driver, and at this point I'm basically stuck. I'm also wondering whether the previous KDE issues were related to the X issues.
Any help would be much appreciated.
Thanks,
Luke

Similar Messages

X does not start automatically after xorg update (1.16)

Hello,
Yesterday after a system update and a reboot, my screen stayed desperatly black. Then I logged in to a console as root and started X by doing:
systemctl isolate multi-user.target
systemctl isolate graphical.target
This means root can start X. So I created the file /etc/X11/Xwrapper.config:
allowed_users = anybody
needs_root_rights = yes
but no change. I'm using the Intel GPU (xf86-video-intel driver).
Any idea?
Last edited by zorggy (2014-07-30 06:50:46)

Oops, I did not search enough in the journal. Here is what looks like a bug:
Jul 30 10:12:09 xxx kernel: ------------[ cut here ]------------
Jul 30 10:12:09 xxx kernel: WARNING: CPU: 2 PID: 343 at drivers/gpu/drm/i915/intel_display.c:860 intel_wait_for_pipe_off+0x1a6/0x1b0 [i915]()
Jul 30 10:12:09 xxx kernel: pipe_off wait timed out
Jul 30 10:12:09 xxx kernel: Modules linked in: hid_generic snd_usb_audio usbhid snd_usbmidi_lib snd_rawmidi hid snd_seq_device tpm_infineon ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 coretemp hwmon xt_conntrack nf_conntrack iptable_filter ip_tables
Jul 30 10:12:09 xxx kernel: nfs lockd sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif crct10dif_common cdrom atkbd libps2 ahci libahci libata ehci_pci xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio
Jul 30 10:12:09 xxx kernel: CPU: 2 PID: 343 Comm: Xorg.bin Not tainted 3.15.7-1-ARCH #1
Jul 30 10:12:09 xxx kernel: Hardware name: Hewlett-Packard HP Compaq Elite 8300 CMT/3396, BIOS K01 v02.05 05/07/2012
Jul 30 10:12:09 xxx kernel: 0000000000000000 00000000900babe8 ffff880211fafa38 ffffffff8150880e
Jul 30 10:12:09 xxx kernel: ffff880211fafa80 ffff880211fafa70 ffffffff81069b2d ffff88020f0ac000
Jul 30 10:12:09 xxx kernel: 0000000000070008 00000000fffea31e 0000000000000000 ffff88020d530b48
Jul 30 10:12:09 xxx kernel: Call Trace:
Jul 30 10:12:09 xxx kernel: [<ffffffff8150880e>] dump_stack+0x4d/0x6f
Jul 30 10:12:09 xxx kernel: [<ffffffff81069b2d>] warn_slowpath_common+0x7d/0xa0
Jul 30 10:12:09 xxx kernel: [<ffffffff81069bac>] warn_slowpath_fmt+0x5c/0x80
Jul 30 10:12:09 xxx kernel: [<ffffffffa06e64b6>] intel_wait_for_pipe_off+0x1a6/0x1b0 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa06e656b>] intel_disable_pipe+0xab/0xc0 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa06e7814>] ironlake_crtc_disable+0xe4/0xa00 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa06eeac7>] __intel_set_mode+0x287/0x16b0 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffff81077bc4>] ? mod_timer+0x114/0x250
Jul 30 10:12:09 xxx kernel: [<ffffffffa06f2686>] intel_set_mode+0x16/0x30 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa06f3740>] intel_crtc_set_config+0xa90/0xde0 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa05dbe71>] drm_mode_set_config_internal+0x61/0xf0 [drm]
Jul 30 10:12:09 xxx kernel: [<ffffffffa05df40b>] drm_mode_setcrtc+0x2ab/0x620 [drm]
Jul 30 10:12:09 xxx kernel: [<ffffffffa05cfb9f>] drm_ioctl+0x1df/0x680 [drm]
Jul 30 10:12:09 xxx kernel: [<ffffffff811c7b10>] do_vfs_ioctl+0x2d0/0x4b0
Jul 30 10:12:09 xxx kernel: [<ffffffff811d221e>] ? __fget+0x6e/0xb0
Jul 30 10:12:09 xxx kernel: [<ffffffff811c7d71>] SyS_ioctl+0x81/0xa0
Jul 30 10:12:09 xxx kernel: [<ffffffff815165a9>] system_call_fastpath+0x16/0x1b
Jul 30 10:12:09 xxx kernel: ---[ end trace 614c784f88b552da ]---
I have another computer running the same driver which succeeded the xorg update. So now I don't know what to do. Re-installing the driver? What package is it exactly?

Photo issue on iPhone 4 after iOS5 update

Since i have updated my White iPhone 4 to iOS5 some of my apps pictures dont appear just the text underneath them. I thought nothing of this at first as after a while they do appear but then others will dissapear!
I tried to use the camera and i can take pictures but if i try to load the camera roll from either the camera app or photos app it will not allow me to view them. In the camera app the photos are also black.
Any assistance would be much appreciated!
Thanks
Steve

I´ve got the exact same problem as well. Via photo stream I can get my pictures to my computer and my iPad and they look fine. And in the iPhone they look ok if I choose "Edit", but the previews are low res or just grey boxes, or duplicates of other images.
Via photo stream I can copy the images to my computer to save them. But since movies don´t go into photo stream, and I cant see anything on my Iphone via iPhoto or "Image capture" they will be lost if Apple doesn´t solve this problem (I´ve succeded to e-mail them to me, but then they are compressed and lores).
This happened to me a couple of days after I updated to iOS5, so it worked just fine for a couple of days before this problem appeared.
I really hope Apple will address this issue very soon, since I (and many with me) use my iPhone as my only camera.
I´ve got an iPhone 4 (my wifes iPhone 3GS has not yet shown any signs of this problem).

[Solved-ish] problem with autologin after xorg update

Hi
I use auto login like described on "Automatic login to virtual console", with the exception that i login as user on VT7 rather than VT1.
Then execute startx on VT7 from zprofile, as shown in Start X at Login.
After updating xorg this morning, I was on VT1 after boot. The screen was kind of blinking once a second, and totally unresponsive.
Booting from the install image on an USB-stick, I commented startx in ~/.zprofile.
After that I was again on VT1 but able to login and then run startx on VT1. Later I found out that I had a login on VT7 and was able to run startx there as well.
Why wouldn't startx run automatically, when it runs fine manually.
This is my [email protected]/autologin.conf
nagual% cat [email protected]/autologin.conf
[Service]
ExecStart=
ExecStart=-/sbin/agetty --autologin leo --noclear %I 38400 linux
Type=simple
startx is run from zprofile with:
#[[ -z $DISPLAY && $XDG_VTNR == 7 ]] && exec startx -- vt$XDG_VTNR
could it be because the display doesn't change to VT7, and why would an xorg update change that?
Last edited by Leo Laursen (2014-07-30 17:54:14)

mrunion wrote:When the upgrade to xorg-server occurred there was a warning about X starting on the appropriate VT. There was also news on the Arch Linux front page (https://www.archlinux.org/news/xorg-ser … available/). You may want to read that news and then look into an xorg.wrap file if necessary.
Thanks. I did see this. As far as I can tell, it shouldn't matter in my case, but of course I could be wrong. I'm starting X on VT7, same as the login. I don't do any redirecting of stderr.
And it is very curious that auto login is affected.

Intel screen tearing after Xorg update

So after updating Xorg about a week ago, I have had constant screen tearing going on with my Intel chipset. I can't figure out what the issue is.
I am running Arch on a Macbook Air 5.2 with an Intel 4000 chipset. I am using AwesomeWM and LightDM.
[root@zakalwe xorg.conf.d]# uname -a
Linux zakalwe 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64 GNU/Linux
[root@zakalwe xorg.conf.d]# lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Here is the output of "X -version"
X.Org X Server 1.16.2
Release Date: 2014-11-10
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.17.2-1-ARCH x86_64
Current Operating System: Linux zakalwe 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=0cbd6822-6139-45db-9bab-a5747b8a4bf7 rw quiet
Build Date: 10 November 2014 07:52:13PM
Current version of pixman: 0.32.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Here is the relevant /etc/X11/xorg.conf.d/ file
Section "Device"
Identifier "Intel Options"
Driver "intel"
Option "Backlight" "intel_backlight"
Option "TearFree" "true"
EndSection
Here is an excerpt from my Xorg.0.log file
[ 184.138] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 184.138] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 184.138] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 184.138] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 184.138] (==) intel(0): RGB weight 888
[ 184.138] (==) intel(0): Default visual is TrueColor
[ 184.138] (**) intel(0): Option "Backlight" "intel_backlight"
[ 184.138] (**) intel(0): Option "TearFree" "true"
[ 184.138] (II) intel(0): Output eDP1 has no monitor section
[ 184.138] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 184.138] (II) intel(0): Enabled output eDP1
Any ideas what is causing this/anyone else having the same issue?
Also, let me know if you need me to provide more info.

Perhaps the update did not apply successfully.
Download and reinstall it manually: http://support.apple.com/kb/DL1048.
Still happening after that? Try a safeboot and then restart: http://support.apple.com/kb/HT1455

[SOLVED] Keyboard layout changed to English after xorg update

Hello all,
I just logged in to my Arch box after a few days of not using it, and issued
pacman -Syu
and upgraded, among others, xorg-server and xorg-server-common to versions 1.11.1-2. Now, after logging out and back in to restart X, I find that my keyboard layout is now (presumably American) English. However, looking under Menu -> Settings -> Keyboard in the XFCE menu, I still see the preferred layout set to Norwegian, as I want. Messing with the settings in this GUI seems to have no effect. However,
setxkbmap no
still works. Anybody experience something similar or have any hints?
Here's the output of
sudo less /var/log/pacman.log | grep 2011-10-12
[2011-10-12 21:05] Running 'pacman -Syu'
[2011-10-12 21:05] synchronizing package lists
[2011-10-12 21:05] starting full system upgrade
[2011-10-12 21:07] update desktop mime database...
[2011-10-12 21:07] removed comix (4.0.4-5)
[2011-10-12 21:07] installed python2-distribute (0.6.21-1)
[2011-10-12 21:07] update desktop mime database...
[2011-10-12 21:07] installed mcomix (0.94-2)
[2011-10-12 21:07] upgraded gtksourceview3 (3.2.0-1 -> 3.2.1-1)
[2011-10-12 21:07] upgraded imagemagick (6.7.2.8-1 -> 6.7.3.0-1)
[2011-10-12 21:07] upgraded libass (0.9.13-1 -> 0.10.0-1)
[2011-10-12 21:07] upgraded libsasl (2.1.23-7 -> 2.1.23-8)
[2011-10-12 21:07] upgraded lsof (4.84-3 -> 4.85-1)
[2011-10-12 21:07] upgraded mkinitcpio (0.7.2-1 -> 0.7.3-1)
[2011-10-12 21:07] upgraded mpfr (3.1.0-2 -> 3.1.0.p1-1)
[2011-10-12 21:07] upgraded python2-pytz (2011h-1 -> 2011k-1)
[2011-10-12 21:07] upgraded shared-mime-info (0.90-1 -> 0.91-1)
[2011-10-12 21:07] upgraded transmission-gtk (2.33-1 -> 2.41-2)
[2011-10-12 21:07] upgraded wine (1.3.29-2 -> 1.3.30-1)
[2011-10-12 21:07] upgraded xf86-input-evdev (2.6.0-3 -> 2.6.0-4)
[2011-10-12 21:07] upgraded xf86-video-nouveau (0.0.16_git20110726-1 -> 0.0.16_git20110829-1)
[2011-10-12 21:07] upgraded xkeyboard-config (2.2.1-1 -> 2.4.1-1)
[2011-10-12 21:07] upgraded xorg-server-common (1.10.4-1 -> 1.11.1-2)
[2011-10-12 21:07] upgraded xorg-server (1.10.4-1 -> 1.11.1-2)
[2011-10-12 21:07] upgraded xorg-xinit (1.3.0-3 -> 1.3.1-1)
[2011-10-12 21:07] Running 'pacman -S alsa-plugins lib32-alsa-plugins'
[2011-10-12 21:07] installed alsa-plugins (1.0.24-2)
[2011-10-12 21:07] installed lib32-alsa-plugins (1.0.24-1)
[2011-10-12 21:09] Running 'pacman -Rs libcanberra lib32-libxxf86dga'
[2011-10-12 21:09] removed lib32-libxxf86dga (1.1.2-1)
[2011-10-12 21:09] removed libcanberra (0.28-2)
And of
sudo less /var/log/Xorg.0.log | grep key
[ 679.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 679.213] (--) Power Button: Found keys
[ 679.213] (II) Power Button: Configuring as keyboard
[ 679.242] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 679.242] (--) Power Button: Found keys
[ 679.242] (II) Power Button: Configuring as keyboard
[ 679.242] (**) LITEON Technology USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 679.242] (--) LITEON Technology USB Multimedia Keyboard: Found keys
[ 679.242] (II) LITEON Technology USB Multimedia Keyboard: Configuring as keyboard
Thank you for any help!
Last edited by mariusmeyer (2011-10-12 21:52:19)

It seems to be treated as standard behavior here (I had the same problem though):
https://wiki.archlinux.org/index.php/Beginners'_Guide#Non-US_keyboard
https://wiki.archlinux.org/index.php/GN … ard_layout
Last edited by viking60 (2011-10-12 20:47:37)

[SOLVED] KDEmod problem after Xorg Update

Hi!
Before explain my problem, I have to say that my english isn't perfect, sorry ^_^ (i'm spanish).
Ok, let's go:
One week ago, I updated my system and Xorg was updated too, since that update my KDEmod restarts always. I read the kdm.log, and it says something about the RGBPath, then I went to my xorg.conf and comment that line.
After that, I could start my X with Gnome, but when I tried with KDEMod, it says "the module Record doesn't exist", I was searching about this module, and I saw that in xorg.conf there was a line that load this module. I also comment it too.
Now, when I try to start KDE, it loads, and when in the splashscreen appears the "K", if I click the mouse then appears my Desktop for 3 or 4 seconds, after that, KDE restarts and splashscreen loads another time, so i'm in a bucle. BTW, if i don't click the mouse, it also restarts after 7 or 8 seconds that K is "load", and begin the bucle loading kde with the splash screen too.
kdm.log doesn't return an error.
What do you think about that?.
Thanks!
EDIT:
I forgot something: another error that I had is with "libGLcore", it said: "libGLcore.177" and "libGLcore.180" have the same name but different file type (or something like that). I fix with the re-install of the manual nvidia drivers.]
=================================================================
FIX
writte in konsole:
nvidia-xconfig
THen add to xorg.conf
Section "ServerFlags"
OPtion "AutoAddDevices" "False"
EndSection
And then, I fix it.
=================================================================
Last edited by d4rkb1t (2008-12-09 20:13:47)

here you have
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH x86_64
Current Operating System: Linux nin 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:35:44 UTC 2008 x86_64
Build Date: 06 December 2008 11:11:31AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 8 17:34:12 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Touchpad"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7b54e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) nVidia Corporation GeForce 8600M GT rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.06 Sat Nov 8 18:16:47 PST 2008
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) NVIDIA dlloader X Driver 180.06 Sat Nov 8 17:56:34 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) NVIDIA(0): Option "PixmapCacheSize" "300000"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8600M GT (G84) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.84.5e.00.08
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8600M GT at PCI:1:0:0:
(--) NVIDIA(0): Seiko (DFP-0)
(--) NVIDIA(0): Seiko (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): Seiko (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x800"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "1280x800"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(**) NVIDIA(0): Option "BackingStore" "True"
(**) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(WW) NVIDIA(0): Option "AGPFastWrite" is not used
(WW) NVIDIA(0): Option "EnablePageFlip" is not used
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) Synaptics touchpad driver version 0.99.1
Touchpad no synaptics event device found
(**) Option "Device" "/dev/input/mouse0"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "15"
(**) Option "FingerHigh" "40"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "VertScrollDelta" "100"
Query no Synaptics: 6003C8
(--) Touchpad: no supported touchpad found
(**) Option "SendCoreEvents"
(**) Touchpad: always reports core events
(II) evaluating device (Touchpad)
(II) XINPUT: Adding extended input device "Touchpad" (type: TOUCHPAD)
Touchpad no synaptics event device found
Query no Synaptics: 6003C8
(--) Touchpad: no supported touchpad found
(II) config/hal: Adding input device PS/2 Generic Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event12"
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Found mouse buttons
(II) PS/2 Generic Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event11"
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found mouse buttons
(II) Logitech USB Receiver: Configuring as mouse
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event9"
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Found mouse buttons
(II) PS/2 Generic Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(II) config/hal: Adding input device Broadcom Corp
(**) Broadcom Corp: always reports core events
(**) Broadcom Corp: Device: "/dev/input/event8"
(II) Broadcom Corp: Found x and y relative axes
(II) Broadcom Corp: Found mouse buttons
(II) Broadcom Corp: Configuring as mouse
(II) XINPUT: Adding extended input device "Broadcom Corp" (type: MOUSE)
(II) config/hal: Adding input device Broadcom Corp
(**) Broadcom Corp: always reports core events
(**) Broadcom Corp: Device: "/dev/input/event7"
(II) Broadcom Corp: Found keys
(II) Broadcom Corp: Configuring as keyboard
(II) XINPUT: Adding extended input device "Broadcom Corp" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Broadcom Corp: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Broadcom Corp: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Broadcom Corp: xkb_layout: "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)

[SOLVED] KDE won't start after Xorg update(nvidia driver)

After update, I disabled hotplug, with :
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
kdm starts normally, i can write login/password, i see kde boot splash, then desktop shows and after about 10 secs it is killed and goes back to login screen.
I think the problem is with hal, because (Xorg.0.log):
(II) config/hal: Adding input device Video Bus
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Video Bus
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed
Also (.xsession-errors)
ERROR: The control display is undefined; please run `nvidia-settings
--help` for usage information.
Last edited by ojciec (2008-12-01 22:28:08)

Well, I rebuilded my xorg.conf with
Xorg -configure
and it started working, even with evdev driver, just had to add
Option "AllowEmptyInput" "False"
in section "ServerFlags". I'm not really sure what caused that error.

Laptop lid closed freezes the system after xorg update

Hello! After the recent xorg-server update one of the problems I got was that when I close the lid of my laptop (it is configured to turn off the screen) the system just freezes and the screen never turns on again... I try to change TTY, press ctrl-alt-bkspc, even press 1 time the poweroff button (that usually shuts down the system gently) but nothing happens. Anyone with the same problem?

Interestingly enough, on a fresh boot, Xorg runs in tty8, instead of running in the usual tty7. It also takes very long to come up after the boot sequence. Could it be that it's crashing and then running another instance immediately after?
Anybody else have something similar?
Last edited by Mystal (2008-12-21 16:54:17)

Email issues on iPhone 3GS after OS4 update

Hi,
I updated my firmware to OS4 yesterday, and my email has been on the blink since then.
Basically, whenever I check my email, I get stuck on the "Connecting..." display forever. The phone never checks my mailboxes, it's just eternally "Connecting..."
The only way I've gotten around this is by turning off the phone, then turning it back on. Once I do that, the phone collects the mail - but only ONCE. After that, it goes back on the endless "Connecting..." loop.
What's the problem? I never had this issue with the last firmware. Just as of yesterday. I have three email accounts on my iPhone - but like I said, the old firmware handled all of them without issue.
Any answers would be greatly appreciated.

I had two users that were unable to get email from Microsoft Exchange 2003 on their iPhone 3GS after upgrading to iOS 4. One other user, however, had no problems after the upgrade. The only difference was that the user with his email functioning had minimal messages in his Inbox.
So for the two other users, I archived email messages to reduce their Inboxes from around 13,000 messages to below 2,500 messages. Once I did this, email started flowing through just fine. I did this to the Sent Items as well, and it worked too. I would give that a try.

[SOLVED]Two finger scrolling/tapping stoped working after xorg update

Hi everyone, i updated my system yesterday to the new xorg server (1.11.1-2). Everything works except for the two finger scrolling on my synaptics touchpad.
There is some info:
Kernel: 3.0.6-2 (stock)
Synaptics Touchpad driver: 1.5.0-1 (lastest)
Right side scrolling works fine, two or three finger tapping doesn't work either.
Here's my Xorg.log:
[ 172.989]
X.Org X Server 1.11.1
Release Date: 2011-09-24
[ 172.989] X Protocol Version 11, Revision 0
[ 172.989] Build Operating System: Linux 3.0-ARCH i686
[ 172.989] Current Operating System: Linux Xenogears 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 10:11:05 UTC 2011 i686
[ 172.989] Kernel command line: root=/dev/sda2 ro quiet fastboot init=/sbin/e4rat-preload
[ 172.989] Build Date: 10 October 2011 08:49:15AM
[ 172.989]
[ 172.989] Current version of pixman: 0.22.2
[ 172.989] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 172.990] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 172.990] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 13 13:27:22 2011
[ 172.990] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 172.990] (==) No Layout section. Using the first Screen section.
[ 172.990] (==) No screen section available. Using defaults.
[ 172.990] (**) |-->Screen "Default Screen Section" (0)
[ 172.990] (**) | |-->Monitor "<default monitor>"
[ 172.990] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 172.990] (==) Automatically adding devices
[ 172.990] (==) Automatically enabling devices
[ 172.991] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 172.991] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 172.991] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 172.991] (II) Loader magic: 0x8228580
[ 172.991] (II) Module ABI versions:
[ 172.991] X.Org ANSI C Emulation: 0.4
[ 172.991] X.Org Video Driver: 11.0
[ 172.991] X.Org XInput driver : 13.0
[ 172.991] X.Org Server Extension : 6.0
[ 172.992] (--) PCI:*(0:1:5:0) 1002:791f:1631:c108 rev 0, Mem @ 0xc0000000/268435456, 0xfd8f0000/65536, 0xfd700000/1048576, I/O @ 0x00008800/256
[ 172.992] (II) Open ACPI successful (/var/run/acpid.socket)
[ 172.992] (II) LoadModule: "extmod"
[ 172.993] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 172.993] (II) Module extmod: vendor="X.Org Foundation"
[ 172.993] compiled for 1.11.1, module version = 1.0.0
[ 172.993] Module class: X.Org Server Extension
[ 172.993] ABI class: X.Org Server Extension, version 6.0
[ 172.993] (II) Loading extension MIT-SCREEN-SAVER
[ 172.993] (II) Loading extension XFree86-VidModeExtension
[ 172.993] (II) Loading extension XFree86-DGA
[ 172.993] (II) Loading extension DPMS
[ 172.993] (II) Loading extension XVideo
[ 172.993] (II) Loading extension XVideo-MotionCompensation
[ 172.993] (II) Loading extension X-Resource
[ 172.993] (II) LoadModule: "dbe"
[ 172.993] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 172.993] (II) Module dbe: vendor="X.Org Foundation"
[ 172.993] compiled for 1.11.1, module version = 1.0.0
[ 172.993] Module class: X.Org Server Extension
[ 172.993] ABI class: X.Org Server Extension, version 6.0
[ 172.994] (II) Loading extension DOUBLE-BUFFER
[ 172.994] (II) LoadModule: "glx"
[ 172.994] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 172.994] (II) Module glx: vendor="X.Org Foundation"
[ 172.994] compiled for 1.11.1, module version = 1.0.0
[ 172.994] ABI class: X.Org Server Extension, version 6.0
[ 172.994] (==) AIGLX enabled
[ 172.994] (II) Loading extension GLX
[ 172.994] (II) LoadModule: "record"
[ 172.994] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 172.994] (II) Module record: vendor="X.Org Foundation"
[ 172.994] compiled for 1.11.1, module version = 1.13.0
[ 172.994] Module class: X.Org Server Extension
[ 172.994] ABI class: X.Org Server Extension, version 6.0
[ 172.994] (II) Loading extension RECORD
[ 172.994] (II) LoadModule: "dri"
[ 172.994] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 172.995] (II) Module dri: vendor="X.Org Foundation"
[ 172.995] compiled for 1.11.1, module version = 1.0.0
[ 172.995] ABI class: X.Org Server Extension, version 6.0
[ 172.995] (II) Loading extension XFree86-DRI
[ 172.995] (II) LoadModule: "dri2"
[ 172.995] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 172.995] (II) Module dri2: vendor="X.Org Foundation"
[ 172.995] compiled for 1.11.1, module version = 1.2.0
[ 172.995] ABI class: X.Org Server Extension, version 6.0
[ 172.995] (II) Loading extension DRI2
[ 172.995] (==) Matched ati as autoconfigured driver 0
[ 172.995] (==) Matched vesa as autoconfigured driver 1
[ 172.995] (==) Matched fbdev as autoconfigured driver 2
[ 172.995] (==) Assigned the driver to the xf86ConfigLayout
[ 172.995] (II) LoadModule: "ati"
[ 172.995] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 172.995] (II) Module ati: vendor="X.Org Foundation"
[ 172.995] compiled for 1.11.0, module version = 6.14.2
[ 172.995] Module class: X.Org Video Driver
[ 172.995] ABI class: X.Org Video Driver, version 11.0
[ 172.995] (II) LoadModule: "radeon"
[ 172.996] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 172.996] (II) Module radeon: vendor="X.Org Foundation"
[ 172.996] compiled for 1.11.0, module version = 6.14.2
[ 172.996] Module class: X.Org Video Driver
[ 172.996] ABI class: X.Org Video Driver, version 11.0
[ 172.996] (II) LoadModule: "vesa"
[ 172.996] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 172.996] (II) Module vesa: vendor="X.Org Foundation"
[ 172.996] compiled for 1.10.99.902, module version = 2.3.0
[ 172.996] Module class: X.Org Video Driver
[ 172.996] ABI class: X.Org Video Driver, version 11.0
[ 172.996] (II) LoadModule: "fbdev"
[ 172.997] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 172.997] (II) Module fbdev: vendor="X.Org Foundation"
[ 172.997] compiled for 1.10.99.902, module version = 0.4.2
[ 172.997] ABI class: X.Org Video Driver, version 11.0
[ 172.997] (II) RADEON: Driver for ATI Radeon chipsets:
********************LOTS OF VIDEO CARDS*******************************
[ 173.004] (II) VESA: driver for VESA chipsets: vesa
[ 173.004] (II) FBDEV: driver for framebuffer: fbdev
[ 173.004] (++) using VT number 8
[ 173.015] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 173.015] (II) [KMS] Kernel modesetting enabled.
[ 173.015] (WW) Falling back to old probe method for vesa
[ 173.015] (WW) Falling back to old probe method for fbdev
[ 173.015] (II) Loading sub module "fbdevhw"
[ 173.015] (II) LoadModule: "fbdevhw"
[ 173.016] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 173.016] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 173.016] compiled for 1.11.1, module version = 0.0.2
[ 173.016] ABI class: X.Org Video Driver, version 11.0
[ 173.016] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 173.016] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 173.016] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 173.016] (==) RADEON(0): Default visual is TrueColor
[ 173.016] (==) RADEON(0): RGB weight 888
[ 173.016] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 173.016] (--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x791f)
[ 173.016] (II) RADEON(0): PCI card detected
[ 173.016] drmOpenDevice: node name is /dev/dri/card0
[ 173.016] drmOpenDevice: open result is 9, (OK)
[ 173.016] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
[ 173.016] drmOpenDevice: node name is /dev/dri/card0
[ 173.016] drmOpenDevice: open result is 9, (OK)
[ 173.016] drmOpenByBusid: drmOpenMinor returns 9
[ 173.016] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
[ 173.017] (II) Loading sub module "exa"
[ 173.017] (II) LoadModule: "exa"
[ 173.017] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 173.017] (II) Module exa: vendor="X.Org Foundation"
[ 173.017] compiled for 1.11.1, module version = 2.5.0
[ 173.017] ABI class: X.Org Video Driver, version 11.0
[ 173.017] (II) RADEON(0): KMS Color Tiling: enabled
[ 173.017] (II) RADEON(0): KMS Pageflipping: enabled
[ 173.017] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 173.190] (II) RADEON(0): Output VGA-0 has no monitor section
[ 173.190] (II) RADEON(0): Output LVDS has no monitor section
[ 173.356] (II) RADEON(0): EDID for output VGA-0
[ 173.356] (II) RADEON(0): EDID for output LVDS
[ 173.356] (II) RADEON(0): Manufacturer: AUO Model: 8174 Serial#: 0
[ 173.356] (II) RADEON(0): Year: 2006 Week: 1
[ 173.356] (II) RADEON(0): EDID Version: 1.3
[ 173.356] (II) RADEON(0): Digital Display Input
[ 173.356] (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 173.357] (II) RADEON(0): Gamma: 2.20
[ 173.357] (II) RADEON(0): No DPMS capabilities specified
[ 173.357] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 173.357] (II) RADEON(0): First detailed timing is preferred mode
[ 173.357] (II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
[ 173.357] (II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 173.357] (II) RADEON(0): Manufacturer's mask: 0
[ 173.357] (II) RADEON(0): Supported detailed timing:
[ 173.357] (II) RADEON(0): clock: 71.1 MHz Image Size: 331 x 207 mm
[ 173.357] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 173.357] (II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 173.357] (II) RADEON(0): Unknown vendor-specific block f
[ 173.357] (II) RADEON(0): AUO
[ 173.357] (II) RADEON(0): B154EW08 V1
[ 173.357] (II) RADEON(0): EDID (in hex):
[ 173.357] (II) RADEON(0): 00ffffffffffff0006af748100000000
[ 173.357] (II) RADEON(0): 01100103802115780a1cf59758508e27
[ 173.357] (II) RADEON(0): 27505400000001010101010101010101
[ 173.357] (II) RADEON(0): 010101010101c71b00a0502017303020
[ 173.357] (II) RADEON(0): 36004bcf100000180000000f00000000
[ 173.357] (II) RADEON(0): 00000000000000000020000000fe0041
[ 173.357] (II) RADEON(0): 554f0a202020202020202020000000fe
[ 173.357] (II) RADEON(0): 004231353445573038205631200a0043
[ 173.357] (II) RADEON(0): Printing probed modes for output LVDS
[ 173.357] (II) RADEON(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
[ 173.357] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 173.357] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 173.357] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 173.357] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 173.357] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 173.357] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 173.357] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 173.357] (II) RADEON(0): Output VGA-0 disconnected
[ 173.357] (II) RADEON(0): Output LVDS connected
[ 173.357] (II) RADEON(0): Using exact sizes for initial modes
[ 173.357] (II) RADEON(0): Output LVDS using initial mode 1280x800
[ 173.357] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 173.357] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fbd8000
[ 173.357] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 173.357] (==) RADEON(0): DPI set to (96, 96)
[ 173.357] (II) Loading sub module "fb"
[ 173.357] (II) LoadModule: "fb"
[ 173.358] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 173.358] (II) Module fb: vendor="X.Org Foundation"
[ 173.358] compiled for 1.11.1, module version = 1.0.0
[ 173.358] ABI class: X.Org ANSI C Emulation, version 0.4
[ 173.358] (II) Loading sub module "ramdac"
[ 173.358] (II) LoadModule: "ramdac"
[ 173.358] (II) Module "ramdac" already built-in
[ 173.358] (II) UnloadModule: "vesa"
[ 173.358] (II) Unloading vesa
[ 173.358] (II) UnloadModule: "fbdev"
[ 173.358] (II) Unloading fbdev
[ 173.358] (II) UnloadModule: "fbdevhw"
[ 173.358] (II) Unloading fbdevhw
[ 173.358] (--) Depth 24 pixmap format is 32 bpp
[ 173.358] (II) RADEON(0): [DRI2] Setup complete
[ 173.358] (II) RADEON(0): [DRI2] DRI driver: r300
[ 173.359] (II) RADEON(0): Front buffer size: 4000K
[ 173.359] (II) RADEON(0): VRAM usage limit set to 228499K
[ 173.359] (==) RADEON(0): Backing store disabled
[ 173.359] (II) RADEON(0): Direct rendering enabled
[ 173.359] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 173.359] (II) RADEON(0): Setting EXA maxPitchBytes
[ 173.359] (II) EXA(0): Driver allocated offscreen pixmaps
[ 173.359] (II) EXA(0): Driver registered support for the following operations:
[ 173.359] (II) Solid
[ 173.359] (II) Copy
[ 173.359] (II) Composite (RENDER acceleration)
[ 173.359] (II) UploadToScreen
[ 173.359] (II) DownloadFromScreen
[ 173.359] (II) RADEON(0): Acceleration enabled
[ 173.359] (==) RADEON(0): DPMS enabled
[ 173.359] (==) RADEON(0): Silken mouse enabled
[ 173.359] (II) RADEON(0): Set up textured video
[ 173.359] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 173.359] (--) RandR disabled
[ 173.359] (II) Initializing built-in extension Generic Event Extension
[ 173.359] (II) Initializing built-in extension SHAPE
[ 173.360] (II) Initializing built-in extension MIT-SHM
[ 173.360] (II) Initializing built-in extension XInputExtension
[ 173.360] (II) Initializing built-in extension XTEST
[ 173.360] (II) Initializing built-in extension BIG-REQUESTS
[ 173.360] (II) Initializing built-in extension SYNC
[ 173.360] (II) Initializing built-in extension XKEYBOARD
[ 173.360] (II) Initializing built-in extension XC-MISC
[ 173.360] (II) Initializing built-in extension SECURITY
[ 173.360] (II) Initializing built-in extension XINERAMA
[ 173.360] (II) Initializing built-in extension XFIXES
[ 173.360] (II) Initializing built-in extension RENDER
[ 173.360] (II) Initializing built-in extension RANDR
[ 173.360] (II) Initializing built-in extension COMPOSITE
[ 173.360] (II) Initializing built-in extension DAMAGE
[ 173.378] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 173.378] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 173.378] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 173.378] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 173.378] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 173.379] (II) AIGLX: Loaded and initialized r300
[ 173.379] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 173.380] (II) RADEON(0): Setting screen physical size to 338 x 211
[ 173.458] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 173.458] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 173.458] (II) LoadModule: "evdev"
[ 173.458] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.459] (II) Module evdev: vendor="X.Org Foundation"
[ 173.459] compiled for 1.10.99.902, module version = 2.6.0
[ 173.459] Module class: X.Org XInput Driver
[ 173.459] ABI class: X.Org XInput driver, version 13.0
[ 173.459] (II) Using input driver 'evdev' for 'Power Button'
[ 173.459] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.459] (**) Power Button: always reports core events
[ 173.459] (**) Power Button: Device: "/dev/input/event4"
[ 173.459] (--) Power Button: Found keys
[ 173.459] (II) Power Button: Configuring as keyboard
[ 173.459] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 173.459] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 173.459] (**) Option "xkb_rules" "evdev"
[ 173.459] (**) Option "xkb_model" "evdev"
[ 173.459] (**) Option "xkb_layout" "us"
[ 173.497] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 173.497] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 173.497] (II) Using input driver 'evdev' for 'Video Bus'
[ 173.497] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.497] (**) Video Bus: always reports core events
[ 173.497] (**) Video Bus: Device: "/dev/input/event5"
[ 173.497] (--) Video Bus: Found keys
[ 173.497] (II) Video Bus: Configuring as keyboard
[ 173.497] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input5/event5"
[ 173.497] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 173.497] (**) Option "xkb_rules" "evdev"
[ 173.497] (**) Option "xkb_model" "evdev"
[ 173.497] (**) Option "xkb_layout" "us"
[ 173.498] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 173.498] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 173.498] (II) Using input driver 'evdev' for 'Power Button'
[ 173.498] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.498] (**) Power Button: always reports core events
[ 173.498] (**) Power Button: Device: "/dev/input/event1"
[ 173.498] (--) Power Button: Found keys
[ 173.498] (II) Power Button: Configuring as keyboard
[ 173.498] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 173.498] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 173.498] (**) Option "xkb_rules" "evdev"
[ 173.498] (**) Option "xkb_model" "evdev"
[ 173.498] (**) Option "xkb_layout" "us"
[ 173.499] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 173.499] (II) No input driver/identifier specified (ignoring)
[ 173.499] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 173.499] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 173.499] (II) Using input driver 'evdev' for 'Sleep Button'
[ 173.499] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.499] (**) Sleep Button: always reports core events
[ 173.500] (**) Sleep Button: Device: "/dev/input/event2"
[ 173.500] (--) Sleep Button: Found keys
[ 173.500] (II) Sleep Button: Configuring as keyboard
[ 173.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 173.500] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 173.500] (**) Option "xkb_rules" "evdev"
[ 173.500] (**) Option "xkb_model" "evdev"
[ 173.500] (**) Option "xkb_layout" "us"
[ 173.501] (II) config/udev: Adding input device CNF7050 (/dev/input/event10)
[ 173.501] (**) CNF7050: Applying InputClass "evdev keyboard catchall"
[ 173.501] (II) Using input driver 'evdev' for 'CNF7050'
[ 173.501] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.501] (**) CNF7050: always reports core events
[ 173.501] (**) CNF7050: Device: "/dev/input/event10"
[ 173.501] (--) CNF7050: Found keys
[ 173.501] (II) CNF7050: Configuring as keyboard
[ 173.501] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.5/usb1/1-7/1-7:1.0/input/input10/event10"
[ 173.501] (II) XINPUT: Adding extended input device "CNF7050" (type: KEYBOARD, id 10)
[ 173.501] (**) Option "xkb_rules" "evdev"
[ 173.501] (**) Option "xkb_model" "evdev"
[ 173.501] (**) Option "xkb_layout" "us"
[ 173.502] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 173.502] (II) No input driver/identifier specified (ignoring)
[ 173.502] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event6)
[ 173.502] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 173.502] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[ 173.502] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.502] (**) Asus Laptop extra buttons: always reports core events
[ 173.502] (**) Asus Laptop extra buttons: Device: "/dev/input/event6"
[ 173.502] (--) Asus Laptop extra buttons: Found keys
[ 173.502] (II) Asus Laptop extra buttons: Configuring as keyboard
[ 173.502] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input6/event6"
[ 173.502] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
[ 173.502] (**) Option "xkb_rules" "evdev"
[ 173.502] (**) Option "xkb_model" "evdev"
[ 173.502] (**) Option "xkb_layout" "us"
[ 173.503] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 173.503] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 173.503] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 173.503] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.503] (**) AT Translated Set 2 keyboard: always reports core events
[ 173.503] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 173.503] (--) AT Translated Set 2 keyboard: Found keys
[ 173.503] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 173.503] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 173.503] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 173.503] (**) Option "xkb_rules" "evdev"
[ 173.503] (**) Option "xkb_model" "evdev"
[ 173.504] (**) Option "xkb_layout" "us"
[ 173.504] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 173.504] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 173.504] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 173.504] (II) LoadModule: "synaptics"
[ 173.505] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 173.505] (II) Module synaptics: vendor="X.Org Foundation"
[ 173.505] compiled for 1.11.0, module version = 1.5.0
[ 173.505] Module class: X.Org XInput Driver
[ 173.505] ABI class: X.Org XInput driver, version 13.0
[ 173.505] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 173.505] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 173.505] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 173.505] (**) Option "Device" "/dev/input/event9"
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 173.716] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 173.716] (**) Option "TapButton1" "1"
[ 173.716] (**) Option "TapButton2" "2"
[ 173.716] (**) Option "TapButton3" "3"
[ 173.823] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 173.823] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 173.930] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input9/event9"
[ 173.930] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 173.930] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 173.930] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 173.930] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 173.930] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 173.930] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 173.930] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 173.930] (II) No input driver/identifier specified (ignoring)
[ 173.931] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 173.931] (II) No input driver/identifier specified (ignoring)
[ 180.276] (II) RADEON(0): EDID vendor "AUO", prod id 33140
[ 180.276] (II) RADEON(0): Printing DDC gathered Modelines:
[ 180.276] (II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
[ 183.590] (II) RADEON(0): EDID vendor "AUO", prod id 33140
[ 183.590] (II) RADEON(0): Printing DDC gathered Modelines:
[ 183.590] (II) RADEON(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
I deteled the part where it lists all the suported video cards...
Thanks in advance.
Last edited by Hyugga (2011-10-20 06:46:11)

Same problem here
Worked like a charm before.
/etc/X11/xorg.conf
# NOXORGCONFEXISTED: No X.org configuration file existed when this backup was created.
/etc/X11/xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
/etc/X11/xorg.conf.d/10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Xorg log
[ 90.424] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 90.424] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 90.424] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 90.424] (II) LoadModule: "synaptics"
[ 90.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 90.424] (II) Module synaptics: vendor="X.Org Foundation"
[ 90.424] compiled for 1.11.0, module version = 1.5.0
[ 90.424] Module class: X.Org XInput Driver
[ 90.424] ABI class: X.Org XInput driver, version 13.0
[ 90.424] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 90.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 90.424] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 90.424] (**) Option "Device" "/dev/input/event6"
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5598
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4670
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 90.500] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 90.500] (**) Option "TapButton1" "1"
[ 90.500] (**) Option "TapButton2" "2"
[ 90.500] (**) Option "TapButton3" "3"
[ 90.532] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 90.532] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 90.564] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 90.564] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 90.564] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 90.564] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 90.564] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 90.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 90.564] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 90.564] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 90.564] (II) No input driver/identifier specified (ignoring)
Last edited by akurei (2011-10-14 10:28:45)

Issue with IE images after FP Update

Good afternoon and thanks for reading.
I have a few machines (so far) which are having issues displaying some images through Internet Explorer following the FP update. The images show up as a white box with a red "X".
If the user account(s) have Admin rights they are able to see the images. If I return them to Standard User only the image problem reoccurs.
I have tried the following:
- Uninstalling FP (utility) as Administrator
- Reinstalling FP .exe as Administrator
Standard User cannot see images
- Uninstalling FP (utility) as user with Administrator rights
- Reinstalling FP (download and .exe) as user with Administrator rights
* As user with Administrator Rights the user can see images.
* Remove Administrator Rights the user can no longer see images
Computers are Windows XP SP2 (32-bit)
Flash Player (from installation file): 10.1.53.64
Internet Explorer 7.0.5730 (note: the IE Logo at the top of the "About" window is not showing up either)
Any advice would be greatly appreciated,
Michael

Update:
I have applied SP3 to Windows XP and also ran Windows Update; I then had to uninstall Flash Player (using the utility) - then reinstall as the user with administrator rights.
Once I removed administrator rights and logged on as a standard user I was able to view images normally.
I will try this one more time, but hopefully a solution has been located.
Michael

HT204563 Having an issue opening Microsoft Outlook after this update. Anyone else having this issue, and if so, do you have a fix?

First post.
Microsoft Outlook won't open after the latest security update. Anyone else experiencing this? If so, is their a fix? If so, what is it?
Thank you!

Try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

Touchpad not detected after Xorg update

cat /proc/bus/input/devices:
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=120013
B: KEY=800000000000 0 0 500f02102002 380307cf810d001 feffffdfffefffff ffffffffffffffff
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/class/input/input2
U: Uniq=
H: Handlers=event2
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/class/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/class/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=4000 0 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0003 Vendor=0a5c Product=4502 Version=0111
N: Name="Broadcom Corp"
P: Phys=usb-0000:00:1a.0-2.2/input0
S: Sysfs=/class/input/input7
U: Uniq=
H: Handlers=kbd event7
B: EV=120013
B: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input8
U: Uniq=
H: Handlers=kbd event8
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0003 Vendor=0a5c Product=4503 Version=0111
N: Name="Broadcom Corp"
P: Phys=usb-0000:00:1a.0-2.3/input0
S: Sysfs=/class/input/input9
U: Uniq=
H: Handlers=mouse1 event9
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=3
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/class/input/input10
U: Uniq=
H: Handlers=kbd event10
B: EV=3
B: KEY=3f000b00000000 0 0 0
I: Bus=0003 Vendor=05a9 Product=2640 Version=0100
N: Name="Laptop Integrated Webcam"
P: Phys=usb-0000:00:1d.7-6
S: Sysfs=/class/input/input11
U: Uniq=
H: Handlers=event11
B: EV=3
B: KEY=1 0 0 0 0
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/class/input/input12
U: Uniq=
H: Handlers=mouse2 event12
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3

mcmillan wrote:Probably related to the xorg upgrade with hotplugging
http://wiki.archlinux.org/index.php/Xor … otplugging
If you haven't already searched the forums there seem to be a few threads going already where people are dealing with issues with this upgrade
I searched and got my keyboard and touchpad set up to work with hotplugging. Keyboard worked, touchpad did not. Any configuration changes I made dont get reconginzed. I dont know what the deal is unfortunately

Email issues on Pantch Breakout after OS update

I just purchased a Pantech Breakout. I had set up my e-mail accounts (gmail, hotmail, and yahoo) and everything was replicating fine. The OS updated and suddenly replication stopped. I tried deleting the accounts and re-adding them, but on re-add, they no longer sync. When trying to connect, it sits and "spins". Yes - the username and password entered is correct.
Since I just bought it, I am still in the period of return - although I'd rather not have to pay money to return a non-working device. But if I can't get e-mail on my smart phone, what's the point.
Any help out there? I'm giving it one more day before I go back to Verizon and ask for my money back for a defective device.

Hello djo1300
That's not supposed to happen with the email. Let's work together and get this fixed. You shouldn't have to pay any money to return a defective device. I'm sure we can get this addressed for you.
Is background data and sync checked? To check this go to: Menu> Setting> Accounts & Sync> then check background data. From that screen please tap on each email account and make sure sync is checked then retest.
Are you able to use the browser on the device? Is Wifi turned on? If so please turn Wifi off and retest. Please remove the battery and sim card for 15 seconds, reinsert and power on the device. Does the email sync now?
Did this start after a particular application was downloaded? If so please remove and retest. Please back up the device with gmail and perform a hard reset. Here's a link for the reset: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=45472
Please let me know if this helps, if not I would be glad to further troubleshoot with you.
Thank you
JoeL_VZW
Please follow us on twitter @vzwsupport

X issues - no xrandr scale after Xorg update (MBP Retina)

Similar Messages

Maybe you are looking for