X-Men: The Ravages of Apocalypse

Play it:
http://www.quake-1.com/docs/flashquake/XMenRavages.swf
Just a test of Michael Rennie's port of the Quake to the Flash engine. The X-Men: Ravages of Apocalypse mod was a commercial total conversion for Quake in the 1990s. Sometime this decade, the developer released the game for free.
The Quake engine, of course, was used for the game Half-Life and in recent history since the port of the engine to the Playstation Portable (Sony PSP), has been the target of many homebrew games, most notably Kurok (site).
Quake engine development (Inside3D) and mapping (Func_Msgboard) continues to this day and the idea that Adobe Alchemy can cause Flash to be an additional "platform" is an interesting one. More "media rich" Quake sites with less emphasis on development though are QuakeOne.com and Quaddicted.

Ive got to sort out that sound delay issue in the Quake port...

Similar Messages

Problem with the MenuBar and how can i delete a own component out of the storage

Hello,
I opened this thread in the category "Flex Builder 2", but
under this category my questions fit better.
I have a problem with the MenuBar and a question to delete a
component out of storage.
1. We have implemented the MenuBar, which was filled
dynamically with XML data.
Sporadically it will appear following fault, if we "mousover"
the root layer.
RangeError: Error #2006: Der angegebene Index liegt
außerhalb des zulässigen Bereichs.
at flash.display::DisplayObjectContainer/addChildAt()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
at mx.managers::SystemManager/addChild()
at mx.managers::PopUpManager$/addPopUp()
at mx.controls::Menu/show()
at mx.controls::MenuBar/::showMenu()
at mx.controls::MenuBar/::mouseOverHandler()
Here a abrid ged version of our XML to create the MenuBar:
<Menuebar>
<menu label="Artikel">
<menu label="Artikel anlegen" data="new_article" />
<menu label="Artikel bearbeiten" data="edit_article" />
<menu label="Verpackung">
<menu label="Verpackung anlegen" data="new_package" />
<menu label="Verpackung bearbeiten" data="edit_package"
/>
</menu>
<menu label="Materialgruppe">
<menu label="Materialgruppe anlegen"
data="new_materialgroup" />
<menu label="Materialgruppe bearbeiten"
data="edit_materialgroup" />
</menu>
</menu>
</Menuebar>
It is a well-formed XML.
2. Delete a component out of storage
We have some own components (basically forms), which will be
created and shown by an construct e.g.
var myComponent : T_Component = new T_Component ;
this.addChild(myComponent)
Some of our forms will be created in an popup. On every call
of the popup, we lost 5 mb or more, all childs on the windows will
be removed by formname.removeAllChild();
What cann we do, that the garbage collector will dispose this
objects.
Is there a way to show all objects with references (NOT
NULL)?
I have read in the Flex Help, that
this.removeChild(myComponent) not delete the form and/or object out
of the storage.
Rather the object must be destroyed.
It is sufficient to call delete(myComponent) about remove
this object out of the storage as the case may be that the
garbage-collector remove this object at any time?
Or how can I destroy a component correctly. What happens with
the widgets on this component e.g. input fields or datagrids?
Are they also being deleted?
Thanks for your help.
Matze

If you mena the "photo Library" then you cannot delete it.
This is how iphone handles photos. There are not two copies. There a re simply two places from which to access the same photos. ALL photos synced to iphone can be accessed via Photo Library. Those same pics can be accessed via their individual folder.

How to change the UDT's Status other than Open and Close ?

Hello Friends,
I have created an table of document type and I want to set the document Status other than open and close for eg.R- Released .
Thanks in advance.

I think if you're using a UDF to set this Status for Marketing documents
First you need to set what item corresponds to each Status level you're tryinf to deploy
After that you can use SDK to set this new property or Formatted searches to change the Status you re creating, and save the document as a draft during your process and your status.
But if you're trying to change the fiel Status used on every Marketing document (i mena the system one), you should know that it is impossible 'cause this is an only read system field.
Hope it helps
Gabriela

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

Hi,
first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
first i edited my video in premier cc
sequence 1280X720, 59,94 fps
48000hz - stereo
the i linked it with dynamik link to after, make some color correction, etc etc etc
i renderd in quicktime animation
my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

Problem with the gateway protection

a few days ago I successfully installed the router WRT54G2 for a wireless broadband connection and I set the wep protection. Today I was suggested to change the security WPA2: I opened the window EasyLink Advisor, I went to tools and then in the keys protection control menù (the icon is represented by 2 keys) and I changed the protection from wep to WPA2 ; after I clikked on forward I was no longer able to create a connection. After several attempts and configurations I created a wireless connection, but checking the details of the gateway, I noticed that the "Wireless Encryption" is written "none" therefore now I am afraid that is not protected. Checking the details of my connection the wireless connection is set on wpa2: is it normal that my connection is wpa2 protected and the gateway no?
I would reinstall everything using the cd that came with the router: How do I reset everything and make the reinstallation ends successfully without any problems?
thanks

To reset your router press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
To re-configure the router don't use the CD, instead :
If your ISP is Cable go here
If your ISP is DSL go here
To enable Security go here

Remove the report location from reports.

How can I remove the report location from reports?
Thanks.
Andrea.

Hi.
If you sue the resubmit function, on Report menÃ¹, the new notification contains the Report Location with the report's URL.
Andrea.

27" imac yosemite update hangs. Required power cycle and safe boot to get the update going. Now all OS X update do the same.

27" iMac Yosemite update hangs.
The original upgrade to Yosemite (10.10) took almost a full day! The computer hung during one of the reboots and just showed a blank grey screen, no apple logo, no progress bar, nothing. I left it like that for about an hour thinking it might be working in the dark... Eventually I had to power cycle. Disconnected power at the wall outlet for about 5 minutes, then reconnected and tried to start. After about 20 minutes, got to the same point, grey screen:no action, again waited at least an hour.
Then I did a safe boot. System came up OK in safe mode to the log in screen. As soon as I logged in, it proceeded with the interrupted update, which ran to completion. Yay!
Now, every update to Yosemite that arrives gives men the same grief!
To add some more, the "Pro Video Formats 2.0.1" update has installed about 4 times, and is asking to be installed again? There's no indication that it fails the update so whats going on?

I saw the set hibernet mode to 0 trick and it failed. Guess I can try 3 because reinstalling OS X did nothing but cost me another few hours and a little faith in Apple. Getting annoyed as I see how many people complain of the identical issue and the fixes are variable and random. Suggests to me that it is a major design flaw in the hardware and Apple got too cute with the just works idea and didn't put a damned power button on the display so there is no manual way to do it and no 'insert a pin here' type trick to reset the thing.
Asking for a refund tomorrow. Past the 14 days so maybe they'll say no but if so then every time this happens I will swap it out. At least then I know it is a three hour fix and as I was working on this for hours today it occurred to me that if the trick is to do 57 different things and maybe one will work then that is not why I made the switch to Apple. I could plug everything in on my PC and it all 'just worked'.
Really poor customer service - the support folks are very nice and I am sure they know that this is a systemic issue but aren't allowed to say so. Feeling pretty stupid for going on faith right about now.

How to interpret the spreport.sql(statpack) output.

Hi,
there is the result.
Top 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) Ela Time
CPU time 3,407 -17.89
log buffer space 1,237 445 -2.34
log file sync 63,132 370 -1.94
log file parallel write 46,293 182 -.96
SQL*Net more data to client 2,430 72 -.38
Any suggestion.
Thanks.

Hi,
Negative value mens the database was shut and restart between snapshots.
Try http://www.oraperf.com/ to help you in statspack interpretation.
Nicolas.
Message was edited by:
N. Gasparotto

A movie i rented cannot download smoothly, but the internet is ok.

hi Dear
this afternoon i rented a movie, X-men the days of past future, could not download smoothly, but the internet was working well.
i have no idea why it happened like such a condition. At beginning the movie downloaded without any trouble, but after a while, it stopped and i had to resume it again and again. such a condition happens continuously.

continued:
and it is shown a error code:9006, i don't what it means.

CTRL+ALT+TECH: The Walking Dead (In a Post-Server 2003 World)

You’ve been left behind. You’re still running Windows Server 2003 and now all help (from Microsoft) has abandoned you. Good news: You’ve still got your brains. Now it’s up to you (and the other survivors) to keep going and avoid all the zombies, er... exploits along the way. Luckily you’ve got strength in numbers.
Tune into CTRL+ALT+TECH to find out how fellow IT pro survivors are navigating the post-EOS apocalypse and what they’re doing to combat the forces of evil that await!
Sponsored by HP and Intel. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.
This topic first appeared in the Spiceworks Community

I have a powershell script that is collecting AD accounts from within a certain OU that expire in the next 30 days. My problem is I cant get it to also display the displayName as a field as well as sort the formatting.
The fullname is coming up blank for me. I know if I add the following line it will sort it but having issues determining where to do so... Select-Object Name,AccountExpirationDate | Sort-Object AccountExpirationDatePowershellparam ($days = -30,$domainsearch = '',$dcServer = '',$emailto = '',$smtpserver = '',$fromaddress = '')$daysin = -$days$expiredaccounts = search-adaccount -AccountExpiring -TimeSpan "30" -Server $dcServer -SearchBase $domainsearch| where {$_.AccountExpirationDate -lt ((get-date).adddays($daysin)) }|select -Property samaccountname,displayName,AccountExpirationDate|Format-Table @{n="Userid";e={$_....

Amazing ride in the Washing Machine

Sooo... I have the 8GB original iPhone, a pair of jeans, and a front loading washing machine. For some reason, I decided that, while I was doing some laundry, the jeans I was wearing needed to be thrown into the wash I was loading. So I emptied my pockets, or at least I thought I did, and threw the jeans in.
One regular cycle later, I start gathering my clothes out of the washer, and remember that my phone was in my jeans pocket. Curses rang out that I am sure were heard for miles around. When I got to the phone, it was shut off. So I powered it up, and cried as the screen only went white. No water was coming out of the phone, but the corners were dinged up with scratches... and I prayed it was only superficial damage, so I put the phone in the dock and let it charge for a bit. The screen came back to normal, but had a streak going down the center, so I decided I needed to heat up the phone a bit, see if I could get the remaining water out of the machine, so I left it in the dock and started playing movies on the phone. Within one movie (No Country For Old Men) the screen came back to normal, and has been running ever since.
Long story short, the old iPhone can take a wash cycle and keep on tickin!
Mike

You should call this story
"Twenty Thousand Agitations Under The Suds"

The Witcher 3: Wild Hunt at Best Buy

No one could possibly imagine that the chaos of today was just the beginning, the start to the dark danger of tomorrow. Who could predict that the terrible pillaging done by the Nilfgaardian Empire, the ravaging of the Northern Kingdoms and the uncertainty of these restless, miserable times are mere child's play compared to the otherworldly threat that looms closer than ever? Don the sword of Geralt of Rivia once again — but this time, the rise and fall of monarchs and battles with legendary monsters are nearly fond memories compared to the danger you now face. This time, that which matters most and those dearest to your heart are in peril. It's time to embark on your most personal quest yet to save your loved ones and protect the world from an ancient threat.
No one could possibly imagine that the chaos of today was just the beginning, the start to the dark danger of tomorrow. Who could predict that the terrible pillaging done by the Nilfgaardian Empire, the ravaging of the Northern Kingdoms and the uncertainty of these restless, miserable times are mere child's play compared to the otherworldly threat that looms closer than ever? Don the sword of Geralt of Rivia once again — but this time, the rise and fall of monarchs and battles with legendary monsters are nearly fond memories compared to the danger you now face. This time, that which matters most and those dearest to your heart are in peril. It's time to embark on your most personal quest yet to save your loved ones and protect the world from an ancient threat.
Wrap yourself in a character-driven, open world based upon the Andrzej Sapkowski's seven-book series — a world that teems with life, nonscripted events, unforgettable quests and action-packed adventure. Play as Witcher Geralt of Rivia, a highly skilled monster hunter, as you become immersed in the mature storyline, where every choice you make is meaningful and consequential.
Pre-Order The Witcher 3: Wild Hunt at Best Buy >
The Witcher 3: Wild Hunt Collector's Edition
Collector's Edition includes The Witcher 3: Wild Hunt, official soundtrack, map of the in-game world, stickers, Witcher Universe — The Compendium and a hand-painted Polystone figure of Geralt of Rivia fighting a Griffin
Also includes an exclusive, collector-grade Witcher medallion, one-of-a-kind SteelBook, 200-page The Witcher 3: Wild Hunt art book and outer and inner collector's boxes
The Collector’s Editions will be available on PlayStation 4, Xbox One, and PC.**The Collector's Editions are extremely limited in nature. If these are listed as 'Sold Out' on BestBuy.com, keep an eye on the product pages for any changes or updates to availability.**
Pre-Order The Witcher 3: Wild Hunt Collector’s Edition at Best Buy >
Related Offers
$10 in Reward CertificatesAs a My Best Buy member, you'll get $10 in reward certificateswhen you pre-order and purchase The Witcher 3: Wild Hunt.Learn more >
20% Off for Unlocked MembersIn addition to $10 in Reward Certificates, Unlocked members also get 20% off The Witcher 3: Wild Hunt.
Learn more >
Pre-Order The Witcher 3: Wild Hunt at Best Buy >
Still have questions? Want to talk to the Best Buy Community about The Witcher 3: Wild Hunt?Reply to this post and join the conversation!

Hi Mako1215,
Great catch!
The added SteelBook when pre-ordering The Witcher 3: Wild Hunt is a fantastic perk and I’m personally starting to get into the SteelBooks myself. I’m also quite excited for The Witcher 3, so this is a win/win as far as I’m concerned.
Because the SteelBook is automatically added to the cart when you pre-order, this would not be included with prior pre-orders if they were placed prior to the SteelBook being added as a bonus. To receive this bonus, you would need to cancel your current pre-order and place a new one if your current pre-order doesn't include the SteelBook. While it’s not ideal, this will be required to obtain the SteelBook bonus. My apologies for any inconvenience here.
Thanks for posting and let us know if you needed anything further.

Sy-tabix in relation to LOOP AT and READ TABLE

Hi All,
As per SAP documentation,
1) While looping through an internal table (LOOP AT), sy-tabix contains the index number of current row(for standard and sorted tables)
2)When successfully reading from an internal table(READ TABLE), sy-tabix is set to the index of the result row.
But what happens when READ TABLE is used while looping through another internal table?
i.e. Loop at TAB1...
write sy-tabix.
READ TABLE TAB2...
write sy-tabix.
endloop.
If we are looping through 1st row of TAB1 and the result of read statement is found in 3rd row of TAB2, I expected that sy-tabix before READ would be 1 and after the READ be 3.
But, I found that sy-tabix remains unchanged at 1. Can someone expalin why?
Thanks,
Jagan

Hi
If after reading the table TAB2 the system variable SY-TABIX has still the previous value, that menas the READ TABLE fails or it was read the first record of TAB2.
After READ TABLE TAB2 try to check the SY-SUBRC:
LOOP AT TAB1.
   WRITE: / 'TAB1 index:', SY-TABIX.
   READ TABLE TAB2 .........
   IF SY-SUBRC = 0.
     WRITE: 'TAB2 index:', SY-TABIX.
Try this:
DATA: BEGIN OF ITAB OCCURS 0,
        FIELD1,
      END   OF ITAB.
DATA: BEGIN OF ITAB2 OCCURS 0,
        FIELD1,
      END   OF ITAB2.
DATA: INDEX TYPE I.
DO 10 TIMES.
APPEND ITAB.
ENDDO.
DO 10 TIMES.
APPEND ITAB2.
ENDDO.
LOOP AT ITAB.
WRITE: / 'ITAB:', SY-TABIX.
INDEX = SY-TABIX + 2.
READ TABLE ITAB2 INDEX INDEX.
IF SY-SUBRC = 0.
    WRITE: 'ITAB2:', SY-TABIX.
ENDIF.
ENDLOOP.
Max

How do I use multiple paragraph styles in one line?

I'm working on my thesis in APA style. I'm creating a Table of Contents with the help of Pages. When you get to Level 3 in APA headings (no problems with Levels 1 and 2) it needs to look like this:
[0.5in Indent] Masculinities in higher education. For men, the college experience.... (paragraph starts on same line as the heading).
I created a paragraph style for the (bolded) heading above [Heading 3]. When I do this, like magic the heading shows up in the table of contents (yeah!). However when I do this the rest of the paragraph shows up too (boo!). When I highlight to change the just rest of the paragraph (not the heading) to the style "Body" it changes the heading too and removes it from the table of contents. How can I make 2 paragraph styles work together in the same paragraph so I can use the tale of contents tool?? Surly there is a work-around.
Pages 5

As the name implies, paragraph styles are not intended to be used on a unit smaller than a paragraph. Therefore if you want the TOC to be automatically generated then you need to have distinct paragraphs... as you specify the APA style with the content and heading continuous then you will have to manually create the TOC.

Unable to invoke Custom PostProcessEventHandler in OIM 11g R2

Hi,
I am working with OIM 11g R2 .I created an custom PostProcessEventHandler to trigger on modify user operation.
I created a jar file of custom class as xyz.jar
I created an plugin.xml as:
<?xml version="1.0" encoding="UTF-8"?>
<oimplugins>
<plugins pluginpoint="oracle.iam.platform.kernel.spi.EventHandler">
<plugin pluginclass="com.xyz.DisablePostProcessEventHandler" version="1.0" name="DisablePostProcessEventHandler">
</plugin>
</plugins>
</oimplugins>
I made an xyz.zip of plugin.xml and lib/xyz.jar
I registered the xyz.zip by placing zip file in plugins directory.
I created an EventHandlers.xml as below:
<?xml version='1.0' encoding='utf-8'?>
<eventhandlers xmlns="http://www.oracle.com/schema/oim/platform/kernel"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.oracle.com/schema/oim/platform/kernelorchestration-handlers.xsd">

<action-handler
class="com.xyz.DisablePostProcessEventHandler" entity-type="User" operation="MODIFY" name="DisablePostProcessEventHandler" stage="postprocess" order="9999" sync="TRUE"/>
</eventhandlers>
and placed in the path temp/metadata/user/custom/CustomPostProcessHandler and imported it to MDS.
I purged the cache as ./PurgeCache MetaData.
When i am trying to modify user i am getting error as below:
[WARNING] [] [oracle.adf.controller.faces.lifecycle.Utils] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 0000JqaUC9MDoYO_qh5EiY1HJuY90001ve,0] [APP: oracle.iam.console.identity.self-service.ear#V2.0] ADF: Adding the following JSF error message: Localized message not available. Error returned is: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null[[
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null
at oracle.adf.model.binding.DCInvokeMethod.invokeMethod(DCInvokeMethod.java:699)
at oracle.adf.model.binding.DCDataControl.invokeMethod(DCDataControl.java:2143)
at oracle.adf.model.bc4j.DCJboDataControl.invokeMethod(DCJboDataControl.java:3114)
at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:261)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1635)
at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2150)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:740)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:402)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)
at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBinding(FacesUtils.java:165)
Caused by: java.lang.NullPointerException
at oracle.iam.request.impl.RequestEngine.startOrchestrationFromPreProcess(RequestEngine.java:5385)
at oracle.iam.request.impl.RequestEngine.triggerOperation(RequestEngine.java:5297)
at oracle.iam.request.impl.RequestEngine.doOperation(RequestEngine.java:5028)
at oracle.iam.impl.OIMServiceImpl.doOperation(OIMServiceImpl.java:43)
at sun.reflect.GeneratedMethodAccessor2994.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy384.doOperation(Unknown Source)
at oracle.iam.api.OIMServiceEJB.doOperationx(Unknown Source)
at sun.reflect.GeneratedMethodAccessor4224.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
## Detail 0 ##
java.lang.NullPointerException
at oracle.iam.request.impl.RequestEngine.startOrchestrationFromPreProcess(RequestEngine.java:5385)
at oracle.iam.request.impl.RequestEngine.triggerOperation(RequestEngine.java:5297)
at oracle.iam.request.impl.RequestEngine.doOperation(RequestEngine.java:5028)
at oracle.iam.impl.OIMServiceImpl.doOperation(OIMServiceImpl.java:43)
at sun.reflect.GeneratedMethodAccessor2994.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy384.doOperation(Unknown Source)
at oracle.iam.api.OIMServiceEJB.doOperationx(Unknown Source)
at sun.reflect.GeneratedMethodAccessor4224.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.Deleg
Please help me in resolving this issue.

Hi Suny,
Yes I restarted the OIM Server but getting same error.
I have logger in my code and and nothing is getting printed thet menas the code is not getting invoked itself.
My eventhandler is for postprocess and I am not understanding why i am getting PreProcess error.
java.lang.NullPointerException
at oracle.iam.request.impl.RequestEngine.startOrchestrationFromPreProcess(RequestEngine.java:

X-Men: The Ravages of Apocalypse

Similar Messages

Maybe you are looking for