X-or functionality in process chains

could u plz explain the x-or functionality in process chainsr
thanks

1. Right Click on the process.
2. Select Maintain message.
3. Select message for error or success.
4. Enter the email address and select via Internet.
5. Save
But make sure that your basis team has maintained all email config settings (SMTP) in transaction SCOT.
Regards
Prakash
Assigning points is a way of saying thanks on SDN!!

Similar Messages

Planning function in process chains.

Hi there
Can we include a planning function in a process chain directly or it needs to be via Planning sequence.
Thanks
Sarah

Hi,
How to include APD in a Process Chain
Re: How to include APD in a Process Chain
APD in the process chain
Hope this helps.
Thanks,
JituK

Process Chain: what does the variant do with "Delelte changelog"

We have a process chain developed by a consulting firm that inside the process chain, there is a variant with the description of "Delelte changelog older than 3 months". Double click this variant to open this variant interface, 1st column titled "Object" shows all rows are ODS picture icons, 2nd column titled "Object Type" shows all rows are "Change Log Table", 3rd column titled "Object Name" shows all rows starting with "8ZXXXXXXXXXX". What kind of this variant function in Process Chain as "Delete changelog"?
Thanks and we are looking forward to seeing your answer soon!

Hi
DSO contains 3 tables. New data table, change log table and active data table.
New data table: When the data was loaded, first the data goes to new data table.
change log table: When you activate the data in DSO, it goes to change log table and active data table. Change log table contains the changes happened like before image,after image.
Active data: Reporting is done out of this table.
Over a period of time the change log table grows in size and it needs to be periodically cleaned to reduce the size of the table.
The variant used to delete the change log entries if it is older than 3 months automatically using the process type "delete change log" in process chains.
Hope it helps.
Regards
Sadeesh

How to create own functions in the decision maker for process chains?

I need a further function which is not already implemented and available in the decision maker of the process chains. But I do not know how to implement a new function.
Please give me some help!!!!!

What does the new function need to do?
You may have to create a new process type. There are a few white papers and blogs about different ways of doing this. Needs ABAP knowledge however.
matt

Execute process chain in BI out of an planning function

Hello all,
is there a way to execute a process chain in BI out of a planning function, e.g. FOX?
We are using BI 7.0. Any help would be fantastic.
Best regards,
Stefan from Munich/Germany

Hi Stefanos,
you could use a planning function to call a function which starts the process chain. The planning function could be a customer planning function type. Make shure that you tick the without blocks tickbox. Otherwise it may be possible that the execution of the process chain is done several times.
Regards Matthias Nutt
SAP Consulting Switzerland

Process Chain for Consolidation Functions

Hi Team,
We have created a process chain for consolidation function as required by client, but we want the process chain to check the preceding task status and only on successfully completion it should proceed to next task. Is there a standard program or function module which does this, please update.
Also we would like to pass dynamic permanent parameter values for the variants of task.
Thanks in advance.
Kind Regards
Sridhar

Hi Collet,
We have created a process chain as below:
Period Initialization - Data Collection -LDS - Calculation of RE - Validation of RFD - Interunit Elimination -COI.
I have created the Separate variants for each of the above functions with program UCBATCH01.and the process chain is working fine.
But we want the process chain to check the task status before it proceed to next task execution and stop if any error occurs in the task. Also we want the dynamic selection of parameters from Permanent Parameters of Consolidation Monitor.
Kind Regards
sridhar

How to call a ECC 6 Function module from BI 7 process chain

Hi BI Gurus
I wann to push the data from infocube to ECC 6 ( Tcurr) table on a daily basis, and we have a function module written in ABAP and this FM is in ECC 6 sytem and we need to call this function module from BI inorder to update the TCURR table.
I used ABAP programm in Process chain but i failed as i dint see any functionality for FM. i could see only abap programm.
I need any you advise on this.
thanks in advance

Hi,
If you are able to see the ABAP report of ECC 6, this ABAP report will inturn call this function module.
Call the report in process chain.

How to execute the process chain using function module

Hi,
How can we execute the process chain when there is any process failed. For ex. when we are running many processes. when loading fails in local process chain, after fixing this error, how can we execute the rest of processes. Can we execute the rest of processes using any function module. Kindly guide me.

Hi,
Chk the weblog.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3149. [original link is broken] [original link is broken] [original link is broken]
Regards,
Balaji

Can we call Function Module from Process Chain?

Hello experts,
I have a small question.
Can we call Function Module(SE37) from Process Chain?
If yes can you please provide some example link?
I m new to BI world.
regards

Hi,
Create one ABAP program and call the function module from that program. Check the link to know how to call a function module from an ABAP program.
http://help.sap.com/saphelp_wp/helpdata/en/d1/801edb454211d189710000e8322d00/content.htm
http://help.sap.com/saphelp_wp/helpdata/en/9f/db98ef35c111d1829f0000e829fbfe/content.htm
Then use process type "ABAP Program" in your process chain and add the program you have created. So then this program will be executed via process chain and this program will call the function module.
Indrashis

How can I define a function in "decide" step in process chain?

Hi guys,
I have a process chain und want to use the "decide" step in this process chain. It seems possible that a funktion can be created ( "Customer defined" ) in this step. But how can I create it and how can I check the available code?
Thanks for any hint!
Regards,
Youyou

It's a helpfel document!
But I steel have a question:
I want to use a self-defeind function. And I also see it is possible to use such function here.
But I am not sure how I can define this function, via BADI?
And how can I use this function here. (Maybe if I can define it, then it shows automatically...)
Regards,
Liying

Process Chain Review Question: function module/ABAP program/Event

Hi,
1. Can you tell me a bit more about function modules such as RSPC_CHAIN_ACTIVATE_REMOTE
2. What are function modules in general terms. i.e. What is their role?
3. How do I see all function module available?
4. When is function module used instead of ABAP program?
5. How do they help in the support and monitoring of Process Chains?
6. I am getting confused over the following under process chains job, event, function module and ABAP Program
Thanks

2. What are function modules in general terms. i.e. What is their role?
Function module return a value ( most of the time), they return some value either a single value of rane of value or even a table. Example: FM to return fiscal period gieven the fiscal vaeiant and system date.
3. How do I see all function module available?
Go to Se37 and this is function builder. You will find FM starting with RS* more useful. You cna also create your own in Se37.
4. When is function module used instead of ABAP program?
In addtion to answer I gave in 3 above, program is used to check some logic and update some tables or give screen output.
You may note FM is also a program.
5. How do they help in the support and monitoring of Process Chains?
As I said, for monitoring chains, use Sm37 and logs in RSPC.
6. I am getting confused over the following under process chains job, event, function module and ABAP Program
I am not clear what are you looking for.
You cna schedule a FM or a program to run in a chain. Is that what you mean?
Ravi Thothadri

How to execute process chains using planning function

hi, i need to execute process chains from web. i know the steps to that needs to be followed for accomplishing the task.
1) RSPC_CHAIN_START ( function module) into which process chain has to be passed
2) create a planning function to invoke the said function module
3) create a function button on web and assign the planning function.
Now the thing is how to create the planning function in BPS. plz provide me a solution with steps. And how to pass the process chain into the function module and handle it.
Thnaks

Hi Anand
RSPC_CHAIN_START is the standard function module to run a process chain which i want use. Now, how to use the said FM in planning function to achive my task. Do i need to maintain any parameter in planning function inorder to execute the FM. If you know the solution plz explain in detail.
I am very new to BPS..bare me plz
Thank you

How to put in process chain a function to desactivate aggregates

Hi all, how can i do to put in process chain a function to desactivate aggregates
thanks

Hello Jorge,
You can use a ABAP process type and call the program
SAP_AGGREGATES_DEACTIVATE to deactivate the aggregates.
Similarly if you want to fill through an ABAP program you can use
SAP_AGGREGATES_ACTIVATE_FILL
You can refer this doc
[Aggregates - Initial Fill: Custom Approach to Fill in Parallel|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7005b9ff-6871-2910-009e-f4d214cbe81f]
You can also refer this Wiki
[Useful ABAP Programs & Function Modules in SAP BI - Business Intelligence|https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=35458]
Thanks
Chandran

Process chains for loading data to target is not functioning

Hi SAPians,
Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly. We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
To mitigate this we tried deleting the bad request and it prompted with the below message:
"Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
Please advise us how the bad request should be deleted?
Regards,
Soujanya

Hi Sowjanya,
Follow the below procedure to make yellow request to RED:
Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
From the next screen, for I_REQUID enter that request ID and execute.
From the next screen, select 'Status Erroneous' radiobutton and continue.
This Function Module, change the status of request from Green / Yellow to RED.
Once it is RED, you can manually delete that request...
Releasing LocK
Gott Transaction Code SM12 and release the lock.
Hope It helps you.
Regardss,
Nagaraju.V

Process chains Decision process user defined functions

Hi Experts,
In process chains process type decision we can define user defined functions. How to define these functions. Any help greatly appreciated. Thanks.
Best Regards,
Suresh.

I can only find out "decision between multiple alternatives'//are you looking for this?
This is used to decide b/w different options as given in its menu....
--SA

X-or functionality in process chains

Similar Messages

Maybe you are looking for