X san 2, volumes doesn't appear!

Hello, i have a problem. i use xserve,promisse (j+e)class,i have xsan2 the problem is that we lost electricity and all were shot down, since that i can see the volumen in any user. how can i recover the xsan? because i dont want to loss the data storage in the promise.

Hello again, i have installed everything i mean, i reconfig the promisse (e+j class) and it works but i need to configure xsan. haver 1 Xserver and 2 Mac pro there is one of the Mac pro that doesn't authenticate its appear as conecting....
What should i do?

Similar Messages

The mark of increasing volume doesn't appear when i use the back light key

the mark of increasing volume doesn't appear when i use the back light key

Hi,
Please write your notebook product number (p/n), which system are you using and country of purchase.
Resource:
How to Locate the Notebook product number (p/n)
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Volume doesn't appear after 3.0 Upgrade

I upgraded my 1st Gen. iPod Touch to the 3.0 software and now my volume bar is gone. Any suggestions? I've already restored and received Genius Bar support. They want me to pay $200 to get new hardware.

ya just plug in your headphones. The play/skip icons kind of move up and the volume slider fades in. I had the same problem. I like the graphic effect, though.

Adjust volume window doesn't appear

I am running imove 08 (last version) and am trying to adjust the volume of background music (or clip volume) but when I click on the adjust audio button the window (as seen in tutorial video) doesn't appear.
I have connected the external monitor I have used before (just in case the window is "somewhere else" and deleted the imove.plist file (to start with new settings).
Desperately,
Thomas

Sorry all, I am too stupid for this world. I have deleted the imovie.plist file in the wrong folder
Done it on a user level, here you go: proper sound, family happy, dad a hero, made my day ...
Thomas

HT5278 i did this update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though! ne1

i did the ios5.1.1 update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though, and for my alarm. ne1 else had these problems?

I have had this happen to me on 3GS, 4 and 4s. Usually the solution is one of the following:
1- If your volume indicator says headphones even though they are not plugged in, then:
Stick your headphones into the headphone jack and then remove quickly.
2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
Hope one of these works for you

Time Capsule Disk Doesn't Appear in Finder or Disk Utility

I have a 500G Time Capsule (single band, I think) that I want to partition (just into disk images, not volumes) so that I can maintain separate-sized locations for my family's music library, photos, and Time Machine backups for the non-media files on each of a Mac Mini and 4 laptops. But I will ask more about that later.
My more immediate problem is that the Time Capsule Disk Volume generally just doesn't appear in my Finder or in Disk Utility at all. A couple weeks ago, for some reason, it did appear once and I took the opportunity to create a 215G Disk Image--leaving 250G for the rest of the Disk Volume which was indicated as having 465G rather than 500G actually available. But since then (as before) the Time Capsule volume hasn't appeared in Disk Utility at all, and only rarely in the Finder.
In the Finder the Time Capsule appears under the Shared heading in the left panel, with the Time Capsule disk volume appearing as a folder in the right panel (if it connects, which it usually requires a password for, but sometimes it doesn't...). If I open the folder then the right panel goes blank (indicating, I think, that I have opened the volume but there is nothing inside) and the volume (usually) eventually shows up under my own Mac in the Devices heading. (That is, the Time Capsule disk volume shows up along with Network, Macintosh HD, and Remote Disk in the right Finder panel when I select my Mac under Devices in the left Finder panel.) At that point the TC volume shows up in the Finder as a 220G Volume and the disk image shows up indented under it as a 215G Disk Image; indented under the Disk Volume there is also a 5G Sparsebundle file from a Time Machine backup. If I open the 220G Disk Volume in the right Finder panel then it shows only the 215G Disk Image and the 5G Sparsebundles in the right Finder panel. This seems to suggest that the 215G Disk Image and the 5G Sparsebundles are both treated as 'used' and the 220G size given for the Disk Volume represents what is left (although 215+5+220=440, so where the extra 25G went I don't know).
If I open the 215G Disk Image in the right Finder panel then, after a while, it shows up as a Disk Image in the right Finder panel when my Mac is selected under Devices in the left panel. I can create folders in the Disk Image and copy documents to those folders, at least.
But in any case, regardless of whether I open the 220G Disk Volume or the 215 Disk Image in the Finder, the Disk Volume never appears in Disk Utility so there is no possibility of reformatting it. The 215 Disk Image has sometimes shown up in Disk Utility (and once it apparently allowed me the option of partitioning the Disk Image into further Disk Images), but sometimes it doesn't show up and I haven't been able to figure out why it does or doesn't.
I find this all very confusing and the Finder and Disk Utility behavior seems downright erratic. I'm not sure whether something is broken or if I just don't understand how it works (starting with the difference between the Devices and Shared headings in the left Finder Pane). I would appreciate any advice on how I can reliably access the Time Capsule disk volume in the Finder and Disk Utility. Thanks.

Same problem after 10.8.2 update yesterday,
Time Machine functions but disk does not mount in finder.
The disk also shows up in disk utility when TM is running
as mounted (beneath a sparse image file) but not visible.
Is this a bug, or a feature?
LW
MBPro. OSX Mountain Lion, backing up to Time Capsule

IPod Touch Volume doesn't work!

My iPod Touch 4G's volume doesn't work! When I increse it, it decreases automatically or, It stays for a while & it gets on 0 again!! What do I doo?

Try the standard fixes in order:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore from backup via iTunes
- Restore to factory defaults/new iPod

Back-up / Retrieve Files from an external hard drive that doesn't appear in Devices

Someone please help!
I am going to write the "history" from my disk utility repair here so that other's who copy and paste into search may find it:
(PLEASE SCROLL 13 ROWS DOWN)
Verify and Repair volume “Your Hard Drive Name”
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Keys out of order
Rebuilding catalog B-tree.
The volume could not be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Ok. I would really love to reformat this disk, but I have stuff on here from film school that I CAN NOT lose
Question:
How would I go about backing-up the disk if the image doesn't appear under devices? I went to the "Restore" tab/button, but I can not choose the hard drive in the first field. I could have sworn my hard drive was formatted for Mac, but I may have formatted it back to FAT32. I know the disk still functions because when it is powered on, it cycles with/without being connected to my MacPro, but after that, it will only cycle if connected (confirming connection). It does run again when I connect the firewire cable. Here is my equipment:
8-Core MacPro 16GB-Mem RAID
MacOSX 10.6.8 | 2 X 1TB Internal HDD
Aug-2008 15" MacBookPro
(That I used the Maxtor-External with mostly)
DEVICE IN QUESTION
500GB Maxtor One-Touch Plus
FireWire 400 6-pin Connection Bus (2 Ports)
Purchased in Early 2008 from Staples
I can fit the back-up on my 2nd HDD in my MacPro or in my other External:
2 TB G-Technology G-RAID External
1 x eSATA | 2 x FireWire 800 9-pin | 1 x USB 2.0
Self Powered DC-IN
I have had a nightmare searching for answers, so any options you might have would be tremendously helpful. I can't lose the data because I have everything I did during film school on there. That stuff is basically what you pay for when you go to film school, you pay to show what you can do and what equipment you have used. SAVE ME FELLOW APPLE PEOPLE!!!! We COMMAND, as well as CONTROL!
-RaphSai

Get Disk Warrior that will repair the problems without requiring that you reformat the drive - $99.00 on a bootable CD. Will not work on a FAT formatted drive.
You will need to use Drag and Drop to save your files by copying them from the bad drive to a good one.
To reprep the drive:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Volume don´t appear in MDC

Hello,
I have 2 servers with xsan 2.1.1 with Mac Os 10.5.6 Server, and I created four volumes in xsan2, and one of them dont saw in one of the servers. The log says:
Jul 28 13:14:18: --- last message repeated 1 time ---
Jul 28 13:14:18 xsand[49]: mkdir '/Volumes/Dates': File exists
When I watch file sharing in server admin, the volumes don´t appear, but I start terminal, and go to /Volumes, the volume appear. this occurs in the master controller of Xsan. How can I fix it? .
In the other server the volume appear, and I can make changes, but dont appear in the other server.
I share this volume by afp in a local network, when one client connect by afp and connect to server, the volume appear. This is very strange, any solutions please?.
Thank you very much!

Sounds like you have a phantom mount record. This is when a folder remains after the unmount. All subsequent mounts result in failure because the mount point is technically still there. To resolve this, unmount all SAN volumes from all clients and servers. Then shutdown your San volumes (this is just a safety precaution). With everything shut down, use Terminal to navigate to the /Volumes directory on the troublesome system. Once there, you will likely find an empty mount record with the offending name. Delete or move the folder. Then fire up your SAN and mount all your volumes.
Obviously, you can do all this without stopping the SAN. However, that is the safer way, especially if you are experiencing something other than I described.
This happens every now and then with Xsan and firewire drives. Expect to do this once or twice every few months.
Hope this helps

I can't move files or folders or delete files without authentication. Also, it doesn't appear that I can change permissions?

I can't seem to move or delete files or folders on my MacBook Air mountain lion system. It doesn't appear that changing permissions works either? Any ideas?

Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

3D menu doesn't appear - Photoshop CS6 extended

The 3D menu doesn't appear on my Photoshop CS6 extended.
I am running Windows 7 Ultimate (Version 6.1)
Any ideas about what is going on?

it also states no video card dtected? I'm gunna paste verything it says so you can have a look at it if that ok?:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2610 MHz
Built-in memory: 2037 MB
Free memory: 412 MB
Memory available to Photoshop: 1627 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
The GPU Sniffer crashed on 18/02/2013 at 21:14:33
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
No video card detected
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\Kara\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 288.8G, 202.6G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libeay32.dll   The OpenSSL Toolkit   0.9.8g
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300
   ssleay32.dll   The OpenSSL Toolkit   0.9.8g
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.3
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mezzotint 13.0
   Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Sumi-e 13.0
   Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

I have HP Pavilion the sound bar doesn't appeare

I have HP Pavilion dv7-2220sf
the sound bar doesn't appeare when I +VOLUME or -VOLUME
I need also HP SMARTMENU
thanks
This question was solved.
View Solution.

Hi,
Make sure you've installed other MediaSmart software first and then install HP MediaSmart SmartMenu last of all. You can find all the MediaSmart software available for your machine under the sub-heading 'Software - Multimedia' on the following link.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4030...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Line-In doesn't appear in the mixer (Audig

The Line-In is dead, and I suppose it's because this source doesn't appear in the mixer.
Because of this, I'm cannot enable the soucre. And then I get no soud.
If I choose "SB Audigy 2 AZS Audio" as default for recording, I'm missing the option to choose Line-In in standard Windows mixer. (The slider isn't there.)If I choose "C-Media Wava Device" as default for recording, I can choose Line-In in standard Windows mixer, but I don't get any signal.
I have installed the last drivers.
Hope you can help me!

OK, sound some better.
Can you run the Creative diagnostic tool without errors?
If you do not find next programs mentioned, you have to install them
(Creative CD bundled with cadr).
Have you AudioHQ on System Control Panel.
- Is speakers set to be muted when using headphones. Uncheck this.
- options : is SB Audigy xxxxx selectedt as sound device?
Control Panel:Sounds & Multimedia
- Audio : is Sound Play Back devic selected to be SB Audigy xxxx
- is all behind Volume (button) set not muted
Check if mic and midi settings are like you want.
- is all behind Advanced (button) set like it shoul be
Hardware : Creative audigy xxx - properties : Creative xxxx (WDM)
- is use this audio device selected
- is do not map through this device selected
Creative Surround Mixer
Speaker settings
- set same settings as above (and select syncronization with control panel)
- unselect digital output only
Rec settings (red portion with slider)
- select AnalogMixer as source
- check if record without monitoring is not checked
- disable unneeded inputs (mic, aux, ...) - wave, volume, linein should be ON
- set input and recording levels
EAX -panel
- switch off all effects if you do not need them
This come into mind now ... hope it helps ...
.jtpMessage Edited by jutapa on 04-07-2005 02:47 AM

After upgrading to IOS5, iphone doesn't appear on Itunes, and i cann't transfer pjhotos on iphoto, .., after upgrading to IOS5, iphone doesn't appear on Itunes, and i cann't transfer pjhotos on iphoto, ..

after upgrading my iphone 4 to IOS5, it doesn't appear on "Itunes", and also i cann't transfer photos on "iphoto", .., so i cant load, save or erased anything now!

They are now in the videos app!

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

X san 2, volumes doesn't appear!

Similar Messages

Maybe you are looking for