X server segfault after suspend (due to webcam)

Hello.
I have ASUS X200M notebook.
After waking up from suspend I have X server falled down.
Some information from logs makes me think that webcam's caused it.
That behavior isn't stationary - sometimes X falls, sometimes not. One can only guess, will it fall after this try or not.
First of all, uname:
[azheltov@shannon ~]$ uname -a
Linux shannon 4.0.0-1-zen #1 ZEN SMP PREEMPT Fri Apr 17 01:05:56 UTC 2015 x86_64 GNU/Linux
Second of all, xinput:
[azheltov@shannon ~]$ xinput
⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                  id=4    [slave  pointer  (2)]
⎜   ↳ FocalTechPS/2 FocalTech FocalTech Touchpad    id=13    [slave  pointer  (2)]
⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                 id=5    [slave  keyboard (3)]
    ↳ Power Button                                id=6    [slave  keyboard (3)]
    ↳ Video Bus                                   id=7    [slave  keyboard (3)]
    ↳ Power Button                                id=8    [slave  keyboard (3)]
    ↳ Sleep Button                                id=9    [slave  keyboard (3)]
    ↳ USB2.0 HD UVC WebCam                        id=10    [slave  keyboard (3)]
    ↳ Asus WMI hotkeys                            id=11    [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard                id=12    [slave  keyboard (3)]
The weirdness, that webcam is identified like a keyboard, has some echoes in xorg log:
[azheltov@shannon xorg]$ cat Xorg.0.log.old | tail -n 43
[  6972.076] (II) config/udev: removing device USB2.0 HD UVC WebCam
[  6972.076] (II) evdev: USB2.0 HD UVC WebCam: Close
[  6972.077] (II) UnloadModule: "evdev"
[  6972.077] (II) systemd-logind: releasing fd for 13:74
[  6972.617] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event10)
[  6972.617] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[  6973.118] (EE) systemd-logind: failed to take device /dev/input/event10: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[  6973.118] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
[  6973.119] (**) USB2.0 HD UVC WebCam: always reports core events
[  6973.119] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event10"
[  6973.119] (EE) evdev: USB2.0 HD UVC WebCam: Unable to open evdev device "/dev/input/event10".
[  6973.119] (EE) PreInit returned 2 for "USB2.0 HD UVC WebCam"
[  6973.119] (II) UnloadModule: "evdev"
[  6973.784] (EE)
[  6973.784] (EE) Backtrace:
[  6973.785] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x594a29]
[  6973.786] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fba1096b5af]
[  6973.788] (EE) 2: /usr/lib/libc.so.6 (__strcmp_sse2_unaligned+0x1a) [0x7fba109c7e0a]
[  6973.789] (EE) 3: /usr/lib/xorg-server/Xorg (xf86SIGIOSupported+0xa38) [0x4a1e48]
[  6973.790] (EE) 4: /usr/lib/libdbus-1.so.3 (dbus_connection_dispatch+0x3f1) [0x7fba125fb5d1]
[  6973.792] (EE) 5: /usr/lib/libdbus-1.so.3 (dbus_connection_dispatch+0x645) [0x7fba125fbdc5]
[  6973.792] (EE) 6: /usr/lib/xorg-server/Xorg (config_fini+0x4c1) [0x49bb11]
[  6973.792] (EE) 7: /usr/lib/xorg-server/Xorg (WakeupHandler+0x6b) [0x43d6cb]
[  6973.793] (EE) 8: /usr/lib/xorg-server/Xorg (WaitForSomething+0x1c3) [0x58d983]
[  6973.793] (EE) 9: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x111) [0x4388b1]
[  6973.793] (EE) 10: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x41b) [0x43cbcb]
[  6973.795] (EE) 11: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fba10958790]
[  6973.795] (EE) 12: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
[  6973.797] (EE) 13: ? (?+0x29) [0x29]
[  6973.797] (EE)
[  6973.797] (EE) Segmentation fault at address 0x0
[  6973.797] (EE)
Fatal server error:
[  6973.797] (EE) Caught signal 11 (Segmentation fault). Server aborting
[  6973.797] (EE)
[  6973.797] (EE)
Please consult the The X.Org Foundation support
     at http://wiki.x.org
for help.
[  6973.797] (EE) Please also check the log file at "/home/azheltov/.local/share/xorg/Xorg.0.log" for additional information.
[  6973.797] (EE)
[  6973.797] (II) AIGLX: Suspending AIGLX clients for VT switch
[  6973.849] (EE) Server terminated with error (1). Closing log file.
[azheltov@shannon xorg]$ cat Xorg.0.log | grep event10
[  6974.737] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event10)
[  6974.739] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 16 paused 0
[  6974.739] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event10"
[  6974.739] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input38/event10"
Pls, help. What can I do to stop X server from falling after suspend?
Links to pastebins:
Xorg.0.log http://pastie.org/private/8my3zq4rhpitygtuwxica
Xorg.0.log.old http://pastie.org/private/bqvszk9rof4vojzcvholw
Thanks
P.S. Sorry for bad English
Last edited by jabberwokky (2015-04-27 22:52:57)

Your problem seems to be related to this bug. It is an ugly issue that happens whenever a peripheral is disconnected, physically or not, like my bluetooth keyboard. On suspend, the peripherals are probably set to sleep and are therefore disconnected. Would probably help to add your logs to the bug report.

Similar Messages

  • [SOLVED] X server segfault after exiting

    The X server on my machine always crashes with a segfault generated by a Fatal IO Error 11, when I exit from an X session. Otherwise works perfectly fine. So this really has no apparent impact on my ability to use X. I'm just curious what may be generating this segfault and what I can do to fix it.
    This is the report while X is running (startx):
    (EE) Failed to load module "vmwgfx" (module does not exist, 0)
    (EE) vmware: Please ignore the above warnings about not being able to to load module/driver vmwgfx
    error setting MTRR (base = 0xd0000000, size = 0x01130000, type = 1) Inappropriate ioctl for device (25)
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    cp: cannot stat `/usr/share/lxde/pcmanfm/pcmanfm.conf': No such file or directory
    GuestApp: no value for option 'unity.desktop.backgroundColor'
    ** (pcmanfm:3974): DEBUG: unable to load icon system-software-install
    (pcmanfm:3974): Gtk-WARNING **: Radio group does not contain an action with value '0'
    This is the actual segfault when I exit my X session:
    ** (lxsession-logout:4166): WARNING **: dbus-interface.c:71: DBUS: The name org.freedesktop.Hal was not provided by any .service files
    ** (lxsession-logout:4166): WARNING **: dbus-interface.c:71: DBUS: The name org.freedesktop.Hal was not provided by any .service files
    ** (pcmanfm:4158): DEBUG: icon theme changed!
    waiting for X server to shut down XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
    after 2438 requests (2438 known processed) with 0 events remaining.
    Backtrace:
    0: /usr/bin/X (xorg_backtrace+0x3b) [0x80df05b]
    1: /usr/bin/X (0x8048000+0x63da5) [0x80abda5]
    2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb77e040c]
    3: /usr/bin/X (FreeCursor+0x57) [0x809cb47]
    4: /usr/lib/xorg/modules/drivers/vmwlegacy_drv.so (0xb73bc000+0x6c84) [0xb73c2c84]
    5: /usr/lib/xorg/modules/drivers/vmwlegacy_drv.so (0xb73bc000+0x4faa) [0xb73c0faa]
    6: /usr/lib/xorg/modules/libshadowfb.so (0xb7398000+0x5020) [0xb739d020]
    7: /usr/bin/X (0x8048000+0x15b26c) [0x81a326c]
    8: /usr/bin/X (0x8048000+0xc61d4) [0x810e1d4]
    9: /usr/bin/X (0x8048000+0x5aebc) [0x80a2ebc]
    10: /usr/bin/X (0x8048000+0x16d3dc) [0x81b53dc]
    11: /usr/bin/X (0x8048000+0x14ae3e) [0x8192e3e]
    12: /usr/bin/X (0x8048000+0x14782e) [0x818f82e]
    13: /usr/lib/xorg/modules/extensions/libextmod.so (0xb743a000+0x9d61) [0xb7443d61]
    14: /usr/bin/X (0x8048000+0xb564c) [0x80fd64c]
    15: /usr/bin/X (0x8048000+0x6f0c5) [0x80b70c5]
    16: /usr/bin/X (0x8048000+0x145902) [0x818d902]
    17: /usr/bin/X (0x8048000+0x9ba80) [0x80e3a80]
    18: /usr/bin/X (0x8048000+0xc3989) [0x810b989]
    19: /usr/bin/X (0x8048000+0x987d2) [0x80e07d2]
    20: /usr/lib/xorg/modules/extensions/libglx.so (0xb73e7000+0x38c0a) [0xb741fc0a]
    21: /usr/bin/X (0x8048000+0x1a548) [0x8062548]
    22: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb752ac76]
    23: /usr/bin/X (0x8048000+0x1a0a1) [0x80620a1]
    Segmentation fault at address 0x19
    Fatal server error:
    Caught signal 11 (Segmentation fault). Server aborting
    And this is Xorg.0.log:
    marfig@archway ~ $ cat /var/log/Xorg.0.log | grep -Ew 'WW|EE'
    [ 5260.295] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 5260.318] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 5260.322] (WW) Warning, couldn't open module vmwgfx
    [ 5260.322] (EE) Failed to load module "vmwgfx" (module does not exist, 0)
    [ 5260.323] (EE) vmware: Please ignore the above warnings about not being able to to load module/driver vmwgfx
    [ 5263.782] (WW) vmwlegacy(0): Option "DPMS" is not used
    [ 5263.782] (WW) vmwlegacy(0): Option "PreferredMode" is not used
    Please advise if you need more information. I'm curious what may be generating this segfault and what I can do to fix it.
    Last edited by marfig (2010-08-07 10:05:02)

    marfig wrote:No. I used LXDE's logout button.
    And before I installed LXDE I'd exit with 'exit' on the last term window.
    So you exit, it crashes - can you restart it?

  • [SOLVED]Will WOL ever work again after suspend to RAM on my server?

    I used Ubuntu on this server for a long while and had WOL working after 'suspend to RAM' and after a 'shutdown -h'. Suddenly with 10.10 WOL after 'suspend to RAM' stopped working, WOL after 'shutdown -h' was still working fine, so I used that for the time being. Some days ago I thought, "well, you use Arch on your laptop for years now, so why not try it on your server, you don't like fixed release cycles anyway and Samba on Ubuntu never worked reliably on this machine, too'. So after a little fiddling to install Arch on this server and following the pm-utils entry on the Arch Wiki I am now at exactly the same position as before, WOL after 'suspend to RAM' doesn't work while WOL after a 'shutdown -h' works. The funny thing is that if I stop the network service before calling 'pm-suspend' on the server directly I can wake it with a WOL command from my laptop. I checked (via ethtool) and saw that disabling the network actually leaves the wol flag for the network card on g, but starting the network service again sets it to d. I have read many howtos and forum posts, but am at a loss right now.
    Does anyone have hints or an idea to where to look now?
    EDIT: Oh man, could this have really been so easy?
    It turns out that I simply need to stop the network service at suspend and start it again at resume, I don't even need to unload the driver module of my network card, doh. What put me off track were all my previous attempts under Ubuntu where I had tried the same thing following provided means (trough acpi) of the distro, seems I messed up there or the documentation was out of date. I now just created a hook completely myself following the Arch documentation for pm-utils and it works now!
    [root@archi ~]# cat /etc/pm/sleep.d/Start_and_stop_network_service
    #!/bin/bash
    case $1 in
    hibernate)
    echo "You didn't really call hibernate?"
    suspend)
    echo "Stop the network service"
    /etc/rc.d/network stop;
    thaw)
    echo "oh, suspend to disk is over, we are resuming..."
    resume)
    echo "Start the network service again"
    /etc/rc.d/network start;
    /usr/sbin/ethtool -s eth0 wol g;
    *) echo "somebody is calling me totally wrong."
    esac
    I also have to re-enable wol in the script, and at a cold boot I do the same through '/etc/rc.local'.
    Last edited by signor_rossi (2011-05-10 19:44:07)

    I agree iMessage is the worst thing Apple have done! Took me 3 days to work out why my text messages were not being sent, more oddly, text message were apearing on my Ipad whcih is is not the 3g model! just switch it off insettings. Other than the iOS 7 is pretty good!

  • Keyboard not working after suspend to ram

    Hi,
    I have this problem since I have my notebook. Is a sony vaio cs.
    After suspend to ram the keyboard does't work.
    I've read in other forums that is a general gnu/linux problem, not only arch, and I think is related with the i8042 driver and generally hp pavillions have it.
    cat /var/log/pm-suspend.log:
    Initial commandline parameters: --quirk-dpms-suspend
    --quirk-dpms-on
    --quirk-vbestate-restore
    --quirk-vbemode-restore
    --quirk-vga-mode3
    --quirk-vbe-post
    Thu Aug 13 22:39:47 UYT 2009: Running hooks for suspend.
    /usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux vaio 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 x86_64 Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz GenuineIntel GNU/Linux
    Module Size Used by
    i915 206216 1
    drm 190080 2 i915
    i2c_algo_bit 6996 1 i915
    joydev 13312 0
    snd_hda_codec_realtek 278132 1
    btusb 15364 0
    bluetooth 65668 1 btusb
    fan 5656 0
    uvcvideo 68316 0
    videodev 42048 1 uvcvideo
    v4l1_compat 18228 2 uvcvideo,videodev
    v4l2_compat_ioctl32 10992 1 videodev
    arc4 2192 2
    vboxdrv 1723308 0
    ecb 3536 2
    snd_seq_dummy 3540 0
    cpufreq_powersave 1872 2
    sdhci_pci 9200 0
    sdhci 20116 1 sdhci_pci
    snd_seq_oss 36224 0
    snd_hda_intel 31208 2
    snd_hda_codec 82128 2 snd_hda_codec_realtek,snd_hda_intel
    iwlagn 108980 0
    snd_seq_midi_event 8592 1 snd_seq_oss
    snd_seq 64640 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 8324 3 snd_seq_dummy,snd_seq_oss,snd_seq
    cpufreq_ondemand 9256 0
    mmc_core 61984 1 sdhci
    snd_hwdep 9976 1 snd_hda_codec
    iwlcore 112976 1 iwlagn
    snd_pcm_oss 47328 0
    snd_mixer_oss 20976 1 snd_pcm_oss
    snd_pcm 90872 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    mac80211 211296 2 iwlagn,iwlcore
    ohci1394 34180 0
    sony_laptop 35224 0
    psmouse 60404 0
    snd_timer 25344 2 snd_seq,snd_pcm
    uhci_hcd 27056 0
    ehci_hcd 40668 0
    i2c_i801 11632 0
    acpi_cpufreq 10272 0
    led_class 5112 2 sdhci,iwlcore
    battery 14072 0
    ieee1394 98880 1 ohci1394
    rfkill 13108 5 iwlcore,sony_laptop
    thermal 17712 0
    video 24268 1 i915
    output 3792 1 video
    serio_raw 7188 0
    snd 76744 15 snd_hda_codec_realtek,snd_seq_oss,snd_hda_intel,snd_hda_codec,snd_seq,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
    soundcore 8576 1 snd
    snd_page_alloc 10784 2 snd_hda_intel,snd_pcm
    cfg80211 78120 3 iwlagn,iwlcore,mac80211
    pcspkr 3088 0
    intel_agp 33104 1
    usbcore 179376 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
    i2c_core 26816 4 i915,drm,i2c_algo_bit,i2c_i801
    ac 5720 0
    sky2 56820 0
    button 7216 0
    sg 33824 0
    freq_table 4528 2 cpufreq_ondemand,acpi_cpufreq
    iTCO_wdt 13648 0
    iTCO_vendor_support 3828 1 iTCO_wdt
    evdev 12928 14
    processor 42064 3 acpi_cpufreq
    rtc_cmos 13592 0
    rtc_core 22212 1 rtc_cmos
    rtc_lib 3120 1 rtc_core
    ext4 256304 2
    mbcache 8980 1 ext4
    jbd2 69088 1 ext4
    crc16 2096 1 ext4
    sr_mod 19460 0
    sd_mod 30696 4
    cdrom 41288 1 sr_mod
    ahci 40992 3
    libata 192460 1 ahci
    scsi_mod 131736 4 sg,sr_mod,sd_mod,libata
    total used free shared buffers cached
    Mem: 3907796 1913868 1993928 0 65068 1566872
    -/+ buffers/cache: 281928 3625868
    Swap: 2441872 0 2441872
    success.
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/55wicd suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
    /etc/pm/sleep.d/99laptop-mode suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
    success.
    Thu Aug 13 22:39:50 UYT 2009: performing suspend
    Thu Aug 13 22:40:10 UYT 2009: Awake.
    Thu Aug 13 22:40:10 UYT 2009: Running hooks for resume
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    /etc/pm/sleep.d/99laptop-mode resume suspend: success.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
    /usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
    /usr/lib/pm-utils/sleep.d/55wicd resume suspend: success.
    /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
    /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    /usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
    Thu Aug 13 22:40:13 UYT 2009: Finished.
    Please ask me for more info if needed.

    I had this issue for almost a year with my Sony CS190. After a clean install, it still exists. So,
    After suspending the keyboard doesn't work, and unbinding/binding i8042 only helps touchpad, not keyboard.
    EDIT: PS: Keyboard & Touchpad work fine after hibernate.
    cat /var/log/Xorg.0.log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686
    Build Date: 04 September 2009 03:37:03PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 4 11:01:41 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section. Using the first Screen section.
    (**) |-->Screen "Default Screen" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) Option "DontZap" "false"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0xec0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:2a42:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000060f0/8
    (--) PCI: (0:0:2:1) 8086:2a43:104d:903f Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xd3400000/1048576
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 2.8.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "DRI" "false"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
    (--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
    (II) intel(0): Output VGA1 using monitor section Monitor0
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1280x800
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (**) intel(0): Kernel mode setting active, disabling FBC.
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): No memory allocations
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (**) Option "dpms" "true"
    (**) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: Disabled
    (WW) intel(0): Option "AccelMethod" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    (II) AIGLX: Screen 0 is not DRI capable
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) intel(0): Setting screen physical size to 338 x 211
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) config/hal: Adding input device Sony Vaio Keys
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Sony Vaio Keys: always reports core events
    (**) Sony Vaio Keys: Device: "/dev/input/event10"
    (II) Sony Vaio Keys: Found keys
    (II) Sony Vaio Keys: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event5"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
    (II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
    (II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
    (II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
    (**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
    (II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event3"
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device UVC Camera (05ca:183f)
    (**) UVC Camera (05ca:183f): always reports core events
    (**) UVC Camera (05ca:183f): Device: "/dev/input/event2"
    (II) UVC Camera (05ca:183f): Found keys
    (II) UVC Camera (05ca:183f): Configuring as keyboard
    (II) XINPUT: Adding extended input device "UVC Camera (05ca:183f)" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event8"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event13"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event7"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) PS/2 Generic Mouse: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) PS/2 Generic Mouse: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) intel(0): Allocate new frame buffer 1024x768 stride 1024
    (II) intel(0): Allocate new frame buffer 2960x1050 stride 3072
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) PS/2 Generic Mouse: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) config/hal: removing device AT Translated Set 2 keyboard
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) intel(0): Allocate new frame buffer 2960x800 stride 3072
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) intel(0): Allocate new frame buffer 2960x800 stride 3072
    (II) intel(0): Allocate new frame buffer 1280x800 stride 1280
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device SynPS/2 Synaptics TouchPad
    (II) UnloadModule: "synaptics"
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: removing device Sony Vaio Keys
    (II) Sony Vaio Keys: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: Adding input device Sony Vaio Keys
    (**) Sony Vaio Keys: always reports core events
    (**) Sony Vaio Keys: Device: "/dev/input/event10"
    (II) Sony Vaio Keys: Found keys
    (II) Sony Vaio Keys: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device SynPS/2 Synaptics TouchPad
    (II) UnloadModule: "synaptics"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) Logitech VoIP USB Dual RF Receiver: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event5"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device AT Raw Set 2 keyboard
    (**) AT Raw Set 2 keyboard: always reports core events
    (**) AT Raw Set 2 keyboard: Device: "/dev/input/event12"
    (II) AT Raw Set 2 keyboard: Found keys
    (II) AT Raw Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Raw Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: removing device AT Raw Set 2 keyboard
    (II) AT Raw Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device PS/2 Generic Mouse
    (II) PS/2 Generic Mouse: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: removing device SynPS/2 Synaptics TouchPad
    (II) UnloadModule: "synaptics"
    (II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
    (II) Logitech VoIP USB Dual RF Receiver: Close
    (II) UnloadModule: "evdev"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): No memory allocations
    (II) Macintosh mouse button emulation: Device reopened after 1 attempts.
    (II) UVC Camera (05ca:183f): Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Video Bus: Device reopened after 1 attempts.
    (II) Power Button: Device reopened after 1 attempts.
    (II) Sony Vaio Keys: Device reopened after 1 attempts.
    (II) config/hal: removing device Logitech VoIP USB Dual RF Receiver
    (II) Logitech VoIP USB Dual RF Receiver: Close
    (II) UnloadModule: "evdev"
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event1"
    (II) PS/2 Generic Mouse: Found 3 mouse buttons
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Configuring as mouse
    (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00
    (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms
    (**) PS/2 Generic Mouse: (accel) set acceleration profile 0
    (II) PS/2 Generic Mouse: initialized for relative axes.
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event3"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event4"
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Logitech VoIP USB Dual RF Receiver
    (**) Logitech VoIP USB Dual RF Receiver: always reports core events
    (**) Logitech VoIP USB Dual RF Receiver: Device: "/dev/input/event5"
    (II) Logitech VoIP USB Dual RF Receiver: Found 12 mouse buttons
    (II) Logitech VoIP USB Dual RF Receiver: Found x and y relative axes
    (II) Logitech VoIP USB Dual RF Receiver: Found scroll wheel(s)
    (II) Logitech VoIP USB Dual RF Receiver: Found keys
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as mouse
    (II) Logitech VoIP USB Dual RF Receiver: Configuring as keyboard
    (**) Logitech VoIP USB Dual RF Receiver: YAxisMapping: buttons 4 and 5
    (**) Logitech VoIP USB Dual RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Logitech VoIP USB Dual RF Receiver" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) Logitech VoIP USB Dual RF Receiver: (accel) keeping acceleration scheme 1
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter chain progression: 2.00
    (**) Logitech VoIP USB Dual RF Receiver: (accel) filter stage 0: 20.00 ms
    (**) Logitech VoIP USB Dual RF Receiver: (accel) set acceleration profile 0
    (II) Logitech VoIP USB Dual RF Receiver: initialized for relative axes.
    cat /var/log/kernel.log
    Oct 4 13:33:04 ArchTiger kernel: PM: Syncing filesystems ... done.
    Oct 4 13:33:04 ArchTiger kernel: Freezing user space processes ... (elapsed 0.00 seconds) done.
    Oct 4 13:33:04 ArchTiger kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    Oct 4 13:33:04 ArchTiger kernel: Suspending console(s) (use no_console_suspend to debug)
    Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Stopping disk
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B disabled
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: ACPI handle has no context!
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A disabled
    Oct 4 13:33:04 ArchTiger kernel: [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
    Oct 4 13:33:04 ArchTiger kernel: ACPI: Preparing to enter system sleep state S3
    Oct 4 13:33:04 ArchTiger kernel: Disabling non-boot CPUs ...
    Oct 4 13:33:04 ArchTiger kernel: CPU 1 is now offline
    Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to UP code
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: CPU1 is down
    Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
    Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#0.
    Oct 4 13:33:04 ArchTiger kernel: Back to C!
    Oct 4 13:33:04 ArchTiger kernel: Extended CMOS year: 2000
    Oct 4 13:33:04 ArchTiger kernel: Enabling non-boot CPUs ...
    Oct 4 13:33:04 ArchTiger kernel: SMP alternatives: switching to SMP code
    Oct 4 13:33:04 ArchTiger kernel: Booting processor 1 APIC 0x1 ip 0x6000
    Oct 4 13:33:04 ArchTiger kernel: Initializing CPU#1
    Oct 4 13:33:04 ArchTiger kernel: Calibrating delay using timer specific routine.. 5059.62 BogoMIPS (lpj=8429792)
    Oct 4 13:33:04 ArchTiger kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
    Oct 4 13:33:04 ArchTiger kernel: CPU: L2 cache: 6144K
    Oct 4 13:33:04 ArchTiger kernel: CPU: Physical Processor ID: 0
    Oct 4 13:33:04 ArchTiger kernel: CPU: Processor Core ID: 1
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check architecture supported.
    Oct 4 13:33:04 ArchTiger kernel: Intel machine check reporting enabled on CPU#1.
    Oct 4 13:33:04 ArchTiger kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    Oct 4 13:33:04 ArchTiger kernel: CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:04 ArchTiger kernel: Switched to high resolution mode on CPU 1
    Oct 4 13:33:04 ArchTiger kernel: CPU0 attaching sched-domain:
    Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:04 ArchTiger kernel: groups: 0 1
    Oct 4 13:33:04 ArchTiger kernel: CPU1 attaching sched-domain:
    Oct 4 13:33:04 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:04 ArchTiger kernel: groups: 1 0
    Oct 4 13:33:04 ArchTiger kernel: CPU1 is up
    Oct 4 13:33:04 ArchTiger kernel: ACPI: Waking up from system sleep state S3
    Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
    Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd670d570)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x5040)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x3ff)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0x30300)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xd450d360)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x50400)
    Oct 4 13:33:04 ArchTiger kernel: pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xd350d350)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
    Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x4001)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd5700004)
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd4600004)
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406)
    Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Oct 4 13:33:04 ArchTiger kernel: ohci1394 0000:06:02.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xd3500900)
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x4 (was 0x0, writing 0xd3500800)
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
    Oct 4 13:33:04 ArchTiger kernel: i915 0000:00:02.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:02.1: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb3: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb4: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1a.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Oct 4 13:33:04 ArchTiger kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb5: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb6: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    Oct 4 13:33:04 ArchTiger kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: usb usb7: root hub lost power or was reset
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: ehci_hcd 0000:00:1d.7: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:00:1e.0: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: ahci 0000:00:1f.2: setting latency timer to 64
    Oct 4 13:33:04 ArchTiger kernel: sky2 0000:02:00.0: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: iwlagn 0000:03:00.0: Radio Frequency Kill Switch is On:
    Oct 4 13:33:04 ArchTiger kernel: Kill switch must be turned off for wireless networking to work.
    Oct 4 13:33:04 ArchTiger kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d3500000-d35007ff] Max Packet=[2048] IR/IT contexts=[4/4]
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Oct 4 13:33:04 ArchTiger kernel: sdhci-pci 0000:06:02.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Oct 4 13:33:04 ArchTiger kernel: pci 0000:06:02.2: PME# disabled
    Oct 4 13:33:04 ArchTiger kernel: sd 0:0:0:0: [sda] Starting disk
    Oct 4 13:33:04 ArchTiger kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:04 ArchTiger kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:04 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 4 13:33:04 ArchTiger kernel: ata1.00: configured for UDMA/133
    Oct 4 13:33:04 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
    Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1 failed to resume: error -19
    Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
    Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.1 failed to resume: error -19
    Oct 4 13:33:04 ArchTiger kernel: pm_op(): usb_dev_resume+0x0/0x30 [usbcore] returns -19
    Oct 4 13:33:04 ArchTiger kernel: PM: Device 5-1.2 failed to resume: error -19
    Oct 4 13:33:04 ArchTiger kernel: Restarting tasks ... <6>usb 5-1: USB disconnect, address 2
    Oct 4 13:33:04 ArchTiger kernel: usb 5-1.1: USB disconnect, address 3
    Oct 4 13:33:04 ArchTiger kernel: done.
    Oct 4 13:33:04 ArchTiger kernel: usb 5-1.2: USB disconnect, address 4
    Oct 4 13:33:05 ArchTiger kernel: i8042.c: Detected active multiplexing controller, rev 1.1.
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Oct 4 13:33:05 ArchTiger kernel: sky2 eth0: enabling interface
    Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Oct 4 13:33:05 ArchTiger kernel: iwlagn 0000:03:00.0: Radio disabled by HW RF Kill switch
    Oct 4 13:33:05 ArchTiger kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Oct 4 13:33:05 ArchTiger kernel: wlan0: Failed to config new BSSID to the low-level driver
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 1
    Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching NULL sched-domain.
    Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching NULL sched-domain.
    Oct 4 13:33:05 ArchTiger kernel: CPU0 attaching sched-domain:
    Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:05 ArchTiger kernel: groups: 0 1
    Oct 4 13:33:05 ArchTiger kernel: CPU1 attaching sched-domain:
    Oct 4 13:33:05 ArchTiger kernel: domain 0: span 0-1 level MC
    Oct 4 13:33:05 ArchTiger kernel: groups: 1 0
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 2
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 try 3
    Oct 4 13:33:05 ArchTiger kernel: wlan0: direct probe to AP 00:22:75:4c:36:15 timed out
    Oct 4 13:33:06 ArchTiger kernel: psmouse serio22: ID: 10 00 64
    Oct 4 13:33:06 ArchTiger kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
    Oct 4 13:33:06 ArchTiger kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    Oct 4 13:33:07 ArchTiger kernel: input: PS/2 Generic Mouse as /devices/platform/i8042/serio22/input/input23
    Oct 4 13:33:07 ArchTiger kernel: Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
    Oct 4 13:33:07 ArchTiger kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio24/input/input24
    Oct 4 13:33:08 ArchTiger kernel: ata2.00: qc timeout (cmd 0xef)
    Oct 4 13:33:08 ArchTiger kernel: ata2.00: failed to set xfermode (err_mask=0x4)
    Oct 4 13:33:09 ArchTiger kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:09 ArchTiger kernel: ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    Oct 4 13:33:09 ArchTiger kernel: ata2.00: configured for UDMA/33
    Oct 4 13:33:09 ArchTiger kernel: ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x18 t4
    Oct 4 13:33:09 ArchTiger kernel: ata2: irq_stat 0x40000001
    Oct 4 13:33:09 ArchTiger kernel: ata2: EH complete
    Oct 4 13:33:10 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
    Oct 4 13:33:17 ArchTiger kernel: eth0: no IPv6 routers present
    Oct 4 13:33:29 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away.
    Oct 4 13:33:30 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
    Oct 4 13:33:32 ArchTiger kernel: psmouse.c: Mouse at isa0060/serio2/input0 lost synchronization, throwing 2 bytes away.
    Oct 4 13:34:04 ArchTiger kernel: usb 5-1: new full speed USB device using uhci_hcd and address 5
    Oct 4 13:34:04 ArchTiger kernel: usb 5-1: configuration #1 chosen from 1 choice
    Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: USB hub found
    Oct 4 13:34:04 ArchTiger kernel: hub 5-1:1.0: 2 ports detected
    Oct 4 13:34:04 ArchTiger kernel: usb 5-1.1: new full speed USB device using uhci_hcd and address 6
    Oct 4 13:34:05 ArchTiger kernel: usb 5-1.1: configuration #1 chosen from 1 choice
    Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input25
    Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input0
    Oct 4 13:34:05 ArchTiger kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input26
    Oct 4 13:34:05 ArchTiger kernel: generic-usb 0003:046D:C51C.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:1d.0-1.1/input1
    Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: new full speed USB device using uhci_hcd and address 7
    Oct 4 13:34:05 ArchTiger kernel: usb 5-1.2: configuration #1 chosen from 1 choice
    cat /var/log/pm-suspend.log
    Initial commandline parameters:
    Sun Oct 4 13:34:08 EDT 2009: Running hooks for suspend.
    /usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
    success.
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux ArchTiger 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 12:37:32 UTC 2009 i686 Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz GenuineIntel GNU/Linux
    Module Size Used by
    sony_laptop 29520 0
    vboxdrv 134376 0
    ipv6 277876 14
    fuse 60896 2
    fan 4392 0
    msr 3240 0
    cpufreq_ondemand 7672 2
    acpi_cpufreq 8624 0
    freq_table 3716 2 cpufreq_ondemand,acpi_cpufreq
    snd_seq_dummy 2696 0
    snd_seq_oss 31168 0
    snd_seq_midi_event 7012 1 snd_seq_oss
    snd_seq 53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    arc4 1732 2
    ecb 2788 2
    iwlagn 95208 0
    sdhci_pci 7300 0
    sdhci 17128 1 sdhci_pci
    iwlcore 96132 1 iwlagn
    mac80211 182976 2 iwlagn,iwlcore
    snd_pcm_oss 40352 0
    ohci1394 30196 0
    mmc_core 52704 1 sdhci
    snd_mixer_oss 17540 1 snd_pcm_oss
    led_class 3976 2 sdhci,iwlcore
    ieee1394 85324 1 ohci1394
    battery 10984 0
    ac 4360 0
    cfg80211 67364 3 iwlagn,iwlcore,mac80211
    rfkill 10640 5 sony_laptop,iwlcore
    thermal 13888 0
    button 5556 0
    snd_hda_codec_realtek 206568 1
    snd_usb_audio 86304 3
    snd_usb_lib 17252 1 snd_usb_audio
    snd_rawmidi 21856 1 snd_usb_lib
    snd_seq_device 6768 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
    i915 184872 2
    processor 35864 3 acpi_cpufreq
    joydev 10400 0
    drm 154656 2 i915
    snd_hda_intel 26664 2
    snd_hda_codec 71716 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 7656 2 snd_usb_audio,snd_hda_codec
    snd_pcm 73512 6 snd_pcm_oss,snd_usb_audio,snd_hda_intel,snd_hda_codec
    snd_timer 21100 2 snd_seq,snd_pcm
    snd 58436 21 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_usb_audio,snd_rawmidi,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    snd_page_alloc 8876 2 snd_hda_intel,snd_pcm
    usbhid 40608 0
    hid 42496 1 usbhid
    i2c_algo_bit 5864 1 i915
    uvcvideo 61040 0
    videodev 36544 1 uvcvideo
    v4l1_compat 15688 2 uvcvideo,videodev
    video 19832 1 i915
    btusb 12632 0
    bluetooth 56676 1 btusb
    output 2884 1 video
    psmouse 59644 0
    i2c_i801 9656 0
    i2c_core 22776 4 i915,drm,i2c_algo_bit,i2c_i801
    intel_agp 27484 1
    agpgart 32756 2 drm,intel_agp
    sg 27928 0
    iTCO_wdt 10952 0
    iTCO_vendor_support 3080 1 iTCO_wdt
    serio_raw 5704 0
    bridge 54008 0
    sky2 47240 0
    evdev 10176 19
    stp 2088 1 bridge
    llc 5552 2 bridge,stp
    tun 13572 0
    soundcore 6784 1 snd
    rtc_cmos 11212 0
    rtc_core 18048 1 rtc_cmos
    rtc_lib 2500 1 rtc_core
    ext3 134380 3
    jbd 48504 1 ext3
    mbcache 7080 1 ext3
    sr_mod 16612 0
    cdrom 36032 1 sr_mod
    sd_mod 27328 5
    uhci_hcd 23540 0
    ehci_hcd 36112 0
    usbcore 150160 8 snd_usb_audio,snd_usb_lib,usbhid,uvcvideo,btusb,uhci_hcd,ehci_hcd
    ahci 34004 4
    libata 168044 1 ahci
    scsi_mod 110708 4 sg,sr_mod,sd_mod,libata
    total used free shared buffers cached
    Mem: 2980024 2880848 99176 0 108764 2400148
    -/+ buffers/cache: 371936 2608088
    Swap: 1052216 0 1052216
    success.
    Let me know, if you need any other output.
    Thanks
    Last edited by Sir_Leon (2009-10-04 17:56:47)

  • [solved]many segfault after a pacman -Syu

    bad luck gnome-* got segfault after a pacman -Syu. that including gedit, empathy, nautilus, epiphany, gnome-screensaver.... gnome is simply half dead!!! somebody help!
    [update]pls scroll down to bsdson.tw #9 for a work around.
    Last edited by semson (2011-09-04 14:58:19)

    here is the pacman log, x86_64
    [2011-09-03 20:15] Running 'pacman -Syu'
    [2011-09-03 20:15] synchronizing package lists
    [2011-09-03 20:15] starting full system upgrade
    [2011-09-03 20:18] removed pygobject-devel (2.28.6-1)
    [2011-09-03 20:18] removed py3gobject (2.28.6-1)
    [2011-09-03 20:18] removed pygobject (2.28.6-1)
    [2011-09-03 20:18] upgraded libglapi (7.11-1 -> 7.11-2)
    [2011-09-03 20:18] upgraded libgl (7.11-1 -> 7.11-2)
    [2011-09-03 20:18] upgraded ati-dri (7.11-1 -> 7.11-2)
    [2011-09-03 20:18] upgraded bzr (2.3.4-1 -> 2.4.0-1)
    [2011-09-03 20:18] upgraded ca-certificates (20110502-1 -> 20110502+nmu1-1)
    [2011-09-03 20:18] upgraded gnutls (3.0.1-1 -> 3.0.2-1)
    [2011-09-03 20:18] upgraded libcups (1.4.8-2 -> 1.5.0-1)
    [2011-09-03 20:18] upgraded gtk-update-icon-cache (2.24.5-3 -> 2.24.6-2)
    [2011-09-03 20:18] upgraded gtk2 (2.24.5-3 -> 2.24.6-2)
    [2011-09-03 20:18] upgraded nss (3.12.11-1 -> 3.12.11-3)
    [2011-09-03 20:18] upgraded libevent (2.0.12-1 -> 2.0.13-1)
    [2011-09-03 20:19] upgraded chromium (13.0.782.215-1 -> 13.0.782.218-1)
    [2011-09-03 20:19] upgraded clutter-gtk (1.0.0-1 -> 1.0.2-1)
    [2011-09-03 20:19] upgraded evolution-data-server (3.0.2.1-2 -> 3.0.3-1)
    [2011-09-03 20:19] upgraded fakeroot (1.17-1 -> 1.18-1)
    [2011-09-03 20:19] upgraded firefox (6.0-1 -> 6.0.1-1)
    [2011-09-03 20:19] upgraded firefox-i18n (6.0-2 -> 6.0.1-1)
    [2011-09-03 20:19] updating gtk immodules... done.
    [2011-09-03 20:19] upgraded gcin (1.6.4-2 -> 1.6.5-1)
    [2011-09-03 20:19] upgraded icedtea-web (1.1.1-1 -> 1.1.2-1)
    [2011-09-03 20:19] upgraded imlib2 (1.4.4-1 -> 1.4.5-1)
    [2011-09-03 20:19] upgraded lib32-libcups (1.4.5-2 -> 1.5.0-1)
    [2011-09-03 20:19] upgraded lib32-gtk2 (2.24.5-1 -> 2.24.6-1)
    [2011-09-03 20:19] upgraded lib32-keyutils (1.4-1 -> 1.5.2-1)
    [2011-09-03 20:19] upgraded libdvbpsi (0.2.0-1 -> 0.2.1-1)
    [2011-09-03 20:19] upgraded libreoffice-zh-TW (3.4.2-1 -> 3.4.3-1)
    [2011-09-03 20:19] upgraded libreoffice-common (3.4.2-2 -> 3.4.3-1)
    [2011-09-03 20:19] upgraded libreoffice-calc (3.4.2-2 -> 3.4.3-1)
    [2011-09-03 20:19] upgraded libreoffice-extension-pdfimport (3.4.2-2 -> 3.4.3-1)
    [2011-09-03 20:19] upgraded libreoffice-extension-presentation-minimizer (3.4.2-2 -> 3.4.3-1)
    [2011-09-03 20:19] upgraded libreoffice-gnome (3.4.2-2 -> 3.4.3-1)
    [2011-09-03 20:19] upgraded libreoffice-impress (3.4.2-2 -> 3.4.3-1)
    [2011-09-03 20:19] upgraded libreoffice-writer (3.4.2-2 -> 3.4.3-1)
    [2011-09-03 20:19] upgraded libwnck (2.30.6-2 -> 2.30.7-1)
    [2011-09-03 20:19] upgraded linux-firmware (20110727-1 -> 20110822-1)
    [2011-09-03 20:19] >>> Updating module dependencies. Please wait ...
    [2011-09-03 20:19] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2011-09-03 20:19] ==> Building image from preset: 'default'
    [2011-09-03 20:19] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2011-09-03 20:19] ==> Starting build: 3.0-ARCH
    [2011-09-03 20:19] -> Parsing hook: [base]
    [2011-09-03 20:19] -> Parsing hook: [udev]
    [2011-09-03 20:19] -> Parsing hook: [autodetect]
    [2011-09-03 20:19] -> Parsing hook: [pata]
    [2011-09-03 20:19] -> Parsing hook: [scsi]
    [2011-09-03 20:19] -> Parsing hook: [sata]
    [2011-09-03 20:19] -> Parsing hook: [filesystems]
    [2011-09-03 20:19] -> Parsing hook: [usbinput]
    [2011-09-03 20:19] ==> Generating module dependencies
    [2011-09-03 20:19] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2011-09-03 20:19] 7210 blocks
    [2011-09-03 20:19] ==> Image generation successful
    [2011-09-03 20:19] ==> Building image from preset: 'fallback'
    [2011-09-03 20:19] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2011-09-03 20:19] ==> Starting build: 3.0-ARCH
    [2011-09-03 20:19] -> Parsing hook: [base]
    [2011-09-03 20:19] -> Parsing hook: [udev]
    [2011-09-03 20:19] -> Parsing hook: [pata]
    [2011-09-03 20:19] -> Parsing hook: [scsi]
    [2011-09-03 20:19] -> Parsing hook: [sata]
    [2011-09-03 20:19] -> Parsing hook: [filesystems]
    [2011-09-03 20:19] -> Parsing hook: [usbinput]
    [2011-09-03 20:19] ==> Generating module dependencies
    [2011-09-03 20:19] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2011-09-03 20:20] 23822 blocks
    [2011-09-03 20:20] ==> Image generation successful
    [2011-09-03 20:20] upgraded linux (3.0.3-1 -> 3.0.4-1)
    [2011-09-03 20:20] upgraded linux-headers (3.0.3-1 -> 3.0.4-1)
    [2011-09-03 20:20] upgraded mesa (7.11-1 -> 7.11-2)
    [2011-09-03 20:20] upgraded polkit (0.101-2 -> 0.102-1)
    [2011-09-03 20:20] installed pygobject2-devel (2.28.6-1)
    [2011-09-03 20:20] installed python-gobject2 (2.28.6-1)
    [2011-09-03 20:20] installed python2-gobject2 (2.28.6-1)
    [2011-09-03 20:20] upgraded qt (4.7.3-3 -> 4.7.4-1)
    [2011-09-03 20:20] upgraded telepathy-logger (0.2.10-1 -> 0.2.10-2)
    [2011-09-03 20:20] upgraded vim-runtime (7.3.266-1 -> 7.3.289-1)
    [2011-09-03 20:20] upgraded vim (7.3.266-1 -> 7.3.289-1)
    [2011-09-03 20:20] upgraded wget (1.13.1-1 -> 1.13.3-1)
    [2011-09-03 20:20] Updating font cache... done.
    [2011-09-03 20:20] wqy-zenhei post install message
    [2011-09-03 20:20] ==> Special Note: By default, we disabled the embedded bitmaps,
    [2011-09-03 20:20] so that the characters will be displayed as Anti-aliased glyphs.
    [2011-09-03 20:20] For those who want to use bitmap font rendering (for 9pt-12pt),
    [2011-09-03 20:20] you can modify the enclosed 44-wqy-zenhei.conf and change the line
    [2011-09-03 20:20] <edit name=\"embeddedbitmap\"><bool>false</bool></edit>
    [2011-09-03 20:20] to
    [2011-09-03 20:20] <edit name=\"embeddedbitmap\"><bool>true</bool></edit>"
    [2011-09-03 20:20]
    [2011-09-03 20:20] Remove 44-wqy-zenhei.conf and 66-wqy-zenhei-sharp.conf symlinks
    [2011-09-03 20:20] from /etc/fonts/conf.d/ directory if you have problems with this
    [2011-09-03 20:20] package.
    [2011-09-03 20:20] upgraded wqy-zenhei (0.9.45-1 -> 0.9.45-2)
    [2011-09-03 20:20] upgraded xulrunner (6.0-2 -> 6.0.1-1)
    Last edited by semson (2011-09-04 07:10:04)

  • After suspend: brightness not changeable

    Hello,
    for the past two weeks I've been trying to solve the last two problems with Arch Linux on my Travelmate C110 - mounting digital camera sucessfully (solved) - and setting lcd brightness after suspend/resume.
    Setting lcd brightness using FN-keys, gnome-brightness-applet or terminal () works just fine after a fresh boot.
    After first standby/resume (pm-utils) I'm not able to change the brightness whatever I try.
    Before and after first suspend/resume the file settings can be changed as intended, but after standby the brightness does not change any more:
    echo 10 | sudo dd of=/proc/acpi/video/VGA/LCD/brightness
    0+1 Datensätze ein
    0+1 Datensätze aus
    3 Bytes (3 B) kopiert, 0,00837844 s, 0,4 kB/s
    [root@ummon ~]# cat /proc/acpi/video/VGA/LCD/brightness
    levels: 0 2 4 6 8 10 12 14 16 18 20
    current: 10
    System data:
    (--) intel(0): Chipset: "852GM/855GM"
    core/kernel26 2.6.28.8-1 [installed] (base)
    extra/xf86-video-intel 2.4.3-1 [installed] (xorg-video-drivers)
    extra/xorg-server 1.5.3-4 [installed] (xorg)
    extra/xorg-server-utils 7.4-2 [installed]
    Any help on this would be greately appreciated.
    Last edited by cywhale (2009-04-01 08:08:34)

    Same happens to me, my lspci is:
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
    00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
    00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
    00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
    00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
    00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
    00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
    00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
    00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
    03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
    0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    The only TEMPORAL solution for me is to make a CTRL-F1 and then a CTRL-F7... the video card came back with the correct brightness and also is possible to change it by the bios keys.
    Aditional information: Everything works ok before upgrading from 2.6.27 to 2.6.29... at this moment the system is up-to-date!
    Last edited by diegognavarro (2009-05-13 18:42:23)

  • No more logging to access.log after suspend/resume

    Hi.
    After suspending (forced) and resuming a Managed Server in Weblogic (10.3.6), no more entries are added to access.log in the logs directory of said server. This happens when I use the Admin Console, and when I use WLST:
    for serverRT in domainRuntimeService.getServerRuntimes():
          print 'Current status for '+ serverRT.getName() +': '+  serverRT.getState()
          print 'Suspending '+ serverRT.getName() +'...'
          serverRT.forceSuspend()
          print 'Resuming '+ serverRT.getName() +'...'
          serverRT.resume()
    Has anybody encountered this as well, and found a way so resolve this?
    FYI, I followed MOS Note 1113583.1 to disable buffering, but this doesn't help.
    Regards,
    Peter.

    Yes, it seems to be a kernel bug. Previously, my wife used Windows for years and nothing like this happened. Now, she tells a lot about Linux systems :-)
    An example of this very-ugly-workaround for somebody who'll find this topic struggling with the same problem:
    $ cat /etc/pm/sleep.d/99_fix_time_shift
    #!/bin/bash
    # fixing https://bbs.archlinux.org/viewtopic.php?id=173487
    case "$1" in
    suspend)
    date +%s > /tmp/suspend.log
    resume)
    was=`cat /tmp/suspend.log`
    now=`date +%s`
    # time shifts for 68 hours
    if [ $now -gt `expr $was + 244800` ]; then
    date -s "`date -R --date="-68 hours ago"`"
    ## sleep 30; ntpdate ntp.ubuntu.com
    fi
    esac
    Last edited by shurup (2014-03-26 16:25:55)

  • NVidia PowerMizer issue after suspend

    Hello,
    my NVidia GeForce 9800 GT just runs fine on Arch. It normally runs in some kind of low power mode with reduced clock frequencies, however when the computer wakes up from suspend, it starts running at full speed until the X server is restarted. nvidia-settings still reports adaptive clocking as enabled, and there is no active OpenGL application that would need that much of power (disabling KDE compositing does not help either). I've got CoolBits enabled to adjust the low power mode's clock frequencies in a way that the GPU can handle compositing with reasonable performance (it is too slow per default), yet disabling it has no effect on the issue.
    I'm using latest 295.40 driver, latest X server and the normal Arch kernel 3.3.2.
    Any ideas?

    thepasto wrote:
    I just found a better solution working for my case.
    /etc/systemd/system/root-suspend.service
    [Unit]
    Description=Local system suspend actions
    Before=sleep.target
    [Service]
    Type=simple
    ExecStart=/usr/bin/rmmod alx
    [Install]
    WantedBy=suspend.target
    /etc/systemd/system/root-resume.service
    [Unit]
    Description=Local system resume actions
    After=suspend.target
    [Service]
    Type=simple
    ExecStart=/usr/bin/modprobe alx
    [Install]
    WantedBy=suspend.target
    and then just enable them:
    sudo systemctl enable root-suspend
    sudo systemctl enable root-resume
    Thanks, this helped me out. I knew the workaround probably involved systemd but I've yet to dive into how it works.

  • Server stalls after some redeployments

    Hi,
    I noticed that my development server (WL60sp2 on NT2k) stalls after some
    redeployments of my web application. Neither the console nor the web
    application work anymore, weblogic.Admin pings do not work too. Is there
    anything unusual about the thread dump??
    Thanks in advance!
    Daniel
    [java] "SSLListenThread" prio=5 tid=0xe5fec58 nid=0x500 runnable
    [0xf2cf000..0xf2cfdbc]
    [java] at java.net.PlainSocketImpl.socketAccept(Native Method)
    [java] at
    java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
    [java] at
    java.net.ServerSocket.implAccept(ServerSocket.java:243)
    [java] at java.net.ServerSocket.accept(ServerSocket.java:222)
    [java] at
    weblogic.security.SSL.SSLServerSocket.acceptNoHandshake(SSLServerSocket.
    java:126)
    [java] at
    weblogic.security.SSL.SSLServerSocket.accept(SSLServerSocket.java:117)
    [java] at
    weblogic.t3.srvr.ListenThread.run(ListenThread.java:247)
    [java]
    [java] "ListenThread" prio=5 tid=0xe4f3ab0 nid=0x74 runnable
    [0xf28f000..0xf28fdbc]
    [java] at java.net.PlainSocketImpl.socketAccept(Native Method)
    [java] at
    java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
    [java] at
    java.net.ServerSocket.implAccept(ServerSocket.java:243)
    [java] at java.net.ServerSocket.accept(ServerSocket.java:222)
    [java] at
    weblogic.t3.srvr.ListenThread.run(ListenThread.java:247)
    [java]
    [java] "Application Manager Thread" prio=5 tid=0xe550830 nid=0x7ec
    waiting on monitor [0xf24f000..0xf24fdbc]
    [java] at java.lang.Thread.sleep(Native Method)
    [java] at
    weblogic.management.mbeans.custom.ApplicationManager$ApplicationPoller.r
    un(ApplicationManager.java:644)
    [java]
    [java] "ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'"
    daemon prio=5 tid=0xe43be00 nid=0x66c waiting on monitor [0xf20f000..0
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'"
    daemon prio=5 tid=0xe454ba8 nid=0x7b4 waiting on monitor [0xf1cf000..0
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "TimeEventGenerator" daemon prio=5 tid=0xe043698 nid=0x7e0
    waiting on monitor [0xecdf000..0xecdfdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at
    weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
    [java] at
    weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
    java:138)
    [java] at java.lang.Thread.run(Thread.java:484)
    [java]
    [java] "TimeEventGenerator" daemon prio=5 tid=0xe043eb0 nid=0x4c4
    waiting on monitor [0xec9f000..0xec9fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at
    weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
    [java] at
    weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
    java:138)
    [java] at java.lang.Thread.run(Thread.java:484)
    [java]
    [java] "SpinnerRandomSource" daemon prio=5 tid=0xe041ee0 nid=0x678
    waiting on monitor [0xec5f000..0xec5fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.security.SpinnerThread.stopSpinning(SpinnerRandomBitsSource.jav
    a:92)
    [java] at
    weblogic.security.SpinnerThread.run(SpinnerRandomBitsSource.java:109)
    [java]
    [java] "ExecuteThread: '14' for queue: 'default'" daemon prio=5
    tid=0x813e00 nid=0x694 waiting on monitor [0xec1f000..0xec1fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '13' for queue: 'default'" daemon prio=5
    tid=0x80b228 nid=0x728 runnable [0xebdf000..0xebdfdbc]
    [java] at weblogic.socket.NTSocketMuxer.getNextSocket(Native
    Method)
    [java] at
    weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:501)
    [java] at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
    [java] at
    weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    [java]
    [java] "ExecuteThread: '12' for queue: 'default'" daemon prio=5
    tid=0x80aad8 nid=0x81c runnable [0xeb9f000..0xeb9fdbc]
    [java] at weblogic.socket.NTSocketMuxer.getNextSocket(Native
    Method)
    [java] at
    weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:501)
    [java] at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
    [java] at
    weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    [java]
    [java] "ExecuteThread: '11' for queue: 'default'" daemon prio=5
    tid=0x809f88 nid=0x684 waiting on monitor [0xeb5f000..0xeb5fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '10' for queue: 'default'" daemon prio=5
    tid=0x809438 nid=0x69c waiting on monitor [0xeb1f000..0xeb1fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '9' for queue: 'default'" daemon prio=5
    tid=0x808948 nid=0x5b0 waiting on monitor [0xeadf000..0xeadfdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '8' for queue: 'default'" daemon prio=5
    tid=0x80ddc8 nid=0x5d0 waiting on monitor [0xea9f000..0xea9fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '7' for queue: 'default'" daemon prio=5
    tid=0x80d2d8 nid=0x720 waiting on monitor [0xea5f000..0xea5fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '6' for queue: 'default'" daemon prio=5
    tid=0xe042dd0 nid=0x27c waiting on monitor [0xea1f000..0xea1fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '5' for queue: 'default'" daemon prio=5
    tid=0x807e58 nid=0x65c waiting on monitor [0xe9df000..0xe9dfdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '4' for queue: 'default'" daemon prio=5
    tid=0x807bf0 nid=0x6c8 waiting on monitor [0xe99f000..0xe99fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '3' for queue: 'default'" daemon prio=5
    tid=0xe418dc0 nid=0x7b8 waiting on monitor [0xe95f000..0xe95fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '2' for queue: 'default'" daemon prio=5
    tid=0x80bcd8 nid=0x55c waiting on monitor [0xe91f000..0xe91fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '1' for queue: 'default'" daemon prio=5
    tid=0x80bbb0 nid=0x6e0 waiting on monitor [0xe8df000..0xe8dfdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '0' for queue: 'default'" daemon prio=5
    tid=0x80b688 nid=0x594 waiting on monitor [0xe89f000..0xe89fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "Thread-0" daemon prio=10 tid=0xe3e2ec0 nid=0x718 waiting on
    monitor [0xe85f000..0xe85fdbc]
    [java] at java.lang.Thread.sleep(Native Method)
    [java] at
    weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionMa
    nagerImpl.java:756)
    [java] at java.lang.Thread.run(Thread.java:484)
    [java]
    [java] "Signal Dispatcher" daemon prio=10 tid=0x23f9e8 nid=0x1c8
    waiting on monitor [0..0]
    [java]
    [java] "Finalizer" daemon prio=9 tid=0x23bc18 nid=0x654 waiting on
    monitor [0xe2bf000..0xe2bfdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at
    java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
    [java] at
    java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
    [java] at
    java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
    [java]
    [java] "Reference Handler" daemon prio=10 tid=0xe0006f0 nid=0x824
    waiting on monitor [0xe27f000..0xe27fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
    [java]
    [java] "main" prio=5 tid=0x235d48 nid=0x514 waiting on monitor
    [0x6f000..0x6fc34]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:501)
    [java] at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
    [java] at weblogic.Server.main(Server.java:35)
    [java]
    [java] "VM Thread" prio=5 tid=0x81a698 nid=0x798 runnable
    [java]
    [java] "VM Periodic Task Thread" prio=10 tid=0x23e748 nid=0x774
    waiting on monitor
    [java] "Suspend Checker Thread" prio=10 tid=0x23f060 nid=0x760
    runnable

    Raja,
    the funny thing is that I did not put it below the applications
    directory. Redeployment works fine most of the time, just had this
    stalls sometimes. I'll probably pass this to support.
    Thanks,
    Daniel
    -----Ursprüngliche Nachricht-----
    Von: Raja Mukherjee [mailto:[email protected]]
    Bereitgestellt: Mittwoch, 11. Juli 2001 22:13
    Bereitgestellt in: performance
    Unterhaltung: Server stalls after some redeployments
    Betreff: Re: Server stalls after some redeployments
    Daniel,
    It seems to be a bug with WL 6.0. Please open a case with support.
    Something I did notice...the undeploy / deploy feature of the
    Admin Console
    works well when the JAR/WAR/EAR is NOT in the application directory.
    For example, let's say that your application directory is if
    D:\bea\wlserver6.0\config\mydomain\applications and you put
    an application
    (JAR/WAR/EAR) in it funny things do happen when you use the
    console to try
    to deploy and undeploy it.
    However if you have the application in another directory
    (let's say d:\temp)
    and then use the console, everything works fine.
    Hope this helps...
    .raja
    "Daniel Hoppe" <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    I noticed that my development server (WL60sp2 on NT2k) stalls after some
    redeployments of my web application. Neither the console nor the web
    application work anymore, weblogic.Admin pings do not work too. Is there
    anything unusual about the thread dump??
    Thanks in advance!
    Daniel
    [java] "SSLListenThread" prio=5 tid=0xe5fec58 nid=0x500 runnable
    [0xf2cf000..0xf2cfdbc]
    [java] at java.net.PlainSocketImpl.socketAccept(Native Method)
    [java] at
    java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
    [java] at
    java.net.ServerSocket.implAccept(ServerSocket.java:243)
    [java] at java.net.ServerSocket.accept(ServerSocket.java:222)
    [java] at
    weblogic.security.SSL.SSLServerSocket.acceptNoHandshake(SSLSer
    verSocket.
    java:126)
    [java] at
    weblogic.security.SSL.SSLServerSocket.accept(SSLServerSocket.java:117)
    [java] at
    weblogic.t3.srvr.ListenThread.run(ListenThread.java:247)
    [java]
    [java] "ListenThread" prio=5 tid=0xe4f3ab0 nid=0x74 runnable
    [0xf28f000..0xf28fdbc]
    [java] at java.net.PlainSocketImpl.socketAccept(Native Method)
    [java] at
    java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
    [java] at
    java.net.ServerSocket.implAccept(ServerSocket.java:243)
    [java] at java.net.ServerSocket.accept(ServerSocket.java:222)
    [java] at
    weblogic.t3.srvr.ListenThread.run(ListenThread.java:247)
    [java]
    [java] "Application Manager Thread" prio=5 tid=0xe550830 nid=0x7ec
    waiting on monitor [0xf24f000..0xf24fdbc]
    [java] at java.lang.Thread.sleep(Native Method)
    [java] at
    weblogic.management.mbeans.custom.ApplicationManager$Applicati
    onPoller.r
    un(ApplicationManager.java:644)
    [java]
    [java] "ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'"
    daemon prio=5 tid=0xe43be00 nid=0x66c waiting on monitor [0xf20f000..0
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'"
    daemon prio=5 tid=0xe454ba8 nid=0x7b4 waiting on monitor [0xf1cf000..0
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "TimeEventGenerator" daemon prio=5 tid=0xe043698 nid=0x7e0
    waiting on monitor [0xecdf000..0xecdfdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at
    weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
    [java] at
    weblogic.time.common.internal.TimeEventGenerator.run(TimeEvent
    Generator.
    java:138)
    [java] at java.lang.Thread.run(Thread.java:484)
    [java]
    [java] "TimeEventGenerator" daemon prio=5 tid=0xe043eb0 nid=0x4c4
    waiting on monitor [0xec9f000..0xec9fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at
    weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
    [java] at
    weblogic.time.common.internal.TimeEventGenerator.run(TimeEvent
    Generator.
    java:138)
    [java] at java.lang.Thread.run(Thread.java:484)
    [java]
    [java] "SpinnerRandomSource" daemon prio=5 tid=0xe041ee0 nid=0x678
    waiting on monitor [0xec5f000..0xec5fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.security.SpinnerThread.stopSpinning(SpinnerRandomBits
    Source.jav
    a:92)
    [java] at
    weblogic.security.SpinnerThread.run(SpinnerRandomBitsSource.java:109)
    [java]
    [java] "ExecuteThread: '14' for queue: 'default'" daemon prio=5
    tid=0x813e00 nid=0x694 waiting on monitor [0xec1f000..0xec1fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '13' for queue: 'default'" daemon prio=5
    tid=0x80b228 nid=0x728 runnable [0xebdf000..0xebdfdbc]
    [java] at weblogic.socket.NTSocketMuxer.getNextSocket(Native
    Method)
    [java] at
    weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:501)
    [java] at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderReques
    t.java:23)
    [java] at
    weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    [java]
    [java] "ExecuteThread: '12' for queue: 'default'" daemon prio=5
    tid=0x80aad8 nid=0x81c runnable [0xeb9f000..0xeb9fdbc]
    [java] at weblogic.socket.NTSocketMuxer.getNextSocket(Native
    Method)
    [java] at
    weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:501)
    [java] at
    weblogic.socket.SocketReaderRequest.execute(SocketReaderReques
    t.java:23)
    [java] at
    weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    [java]
    [java] "ExecuteThread: '11' for queue: 'default'" daemon prio=5
    tid=0x809f88 nid=0x684 waiting on monitor [0xeb5f000..0xeb5fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '10' for queue: 'default'" daemon prio=5
    tid=0x809438 nid=0x69c waiting on monitor [0xeb1f000..0xeb1fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '9' for queue: 'default'" daemon prio=5
    tid=0x808948 nid=0x5b0 waiting on monitor [0xeadf000..0xeadfdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '8' for queue: 'default'" daemon prio=5
    tid=0x80ddc8 nid=0x5d0 waiting on monitor [0xea9f000..0xea9fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '7' for queue: 'default'" daemon prio=5
    tid=0x80d2d8 nid=0x720 waiting on monitor [0xea5f000..0xea5fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '6' for queue: 'default'" daemon prio=5
    tid=0xe042dd0 nid=0x27c waiting on monitor [0xea1f000..0xea1fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '5' for queue: 'default'" daemon prio=5
    tid=0x807e58 nid=0x65c waiting on monitor [0xe9df000..0xe9dfdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '4' for queue: 'default'" daemon prio=5
    tid=0x807bf0 nid=0x6c8 waiting on monitor [0xe99f000..0xe99fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '3' for queue: 'default'" daemon prio=5
    tid=0xe418dc0 nid=0x7b8 waiting on monitor [0xe95f000..0xe95fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '2' for queue: 'default'" daemon prio=5
    tid=0x80bcd8 nid=0x55c waiting on monitor [0xe91f000..0xe91fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '1' for queue: 'default'" daemon prio=5
    tid=0x80bbb0 nid=0x6e0 waiting on monitor [0xe8df000..0xe8dfdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "ExecuteThread: '0' for queue: 'default'" daemon prio=5
    tid=0x80b688 nid=0x594 waiting on monitor [0xe89f000..0xe89fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
    [java] at
    weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
    [java]
    [java] "Thread-0" daemon prio=10 tid=0xe3e2ec0 nid=0x718 waiting on
    monitor [0xe85f000..0xe85fdbc]
    [java] at java.lang.Thread.sleep(Native Method)
    [java] at
    weblogic.transaction.internal.TransactionManagerImpl$1.run(Tra
    nsactionMa
    nagerImpl.java:756)
    [java] at java.lang.Thread.run(Thread.java:484)
    [java]
    [java] "Signal Dispatcher" daemon prio=10 tid=0x23f9e8 nid=0x1c8
    waiting on monitor [0..0]
    [java]
    [java] "Finalizer" daemon prio=9 tid=0x23bc18 nid=0x654 waiting on
    monitor [0xe2bf000..0xe2bfdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at
    java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
    [java] at
    java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
    [java] at
    java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
    [java]
    [java] "Reference Handler" daemon prio=10 tid=0xe0006f0 nid=0x824
    waiting on monitor [0xe27f000..0xe27fdbc]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at
    java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
    [java]
    [java] "main" prio=5 tid=0x235d48 nid=0x514 waiting on monitor
    [0x6f000..0x6fc34]
    [java] at java.lang.Object.wait(Native Method)
    [java] at java.lang.Object.wait(Object.java:420)
    [java] at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:501)
    [java] at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
    [java] at weblogic.Server.main(Server.java:35)
    [java]
    [java] "VM Thread" prio=5 tid=0x81a698 nid=0x798 runnable
    [java]
    [java] "VM Periodic Task Thread" prio=10 tid=0x23e748 nid=0x774
    waiting on monitor
    [java] "Suspend Checker Thread" prio=10 tid=0x23f060 nid=0x760
    runnable

  • Strange behavior after suspend.

    Hi,
    For some time I have a strange behavior of my system after I awake my computer(after suspend). This problem don't disappear after update.
    Ok, so if I suspend my computer, and awake him I can't run any program. Even if i was open some application, this application crashes. I have to restart my machine.
    Somebody had similar problem or know how help?
    I'm using Arch Linux x64, kernel 3.8, openbox. Suspend by "systemctl suspend".

    OK, maybe good idea is paste here my output journal:
    # journalctl --since=today | tac | sed -n '/-- Reboot --/{n;:r;/-- Reboot --/q;p;n;b r}' | tac
    -- Logs begin at Mon 2012-09-10 20:20:07 CEST, end at Thu 2013-03-28 10:17:18 CET. --
    Mar 28 10:10:36 localhost kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
    Mar 28 10:10:36 localhost systemd[1]: Time has been changed
    Mar 28 10:10:36 localhost systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
    Mar 28 10:10:36 localhost kernel: Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    Mar 28 10:10:36 localhost dhcpcd[1435]: eth1: carrier lost
    Mar 28 10:10:36 localhost kernel: PM: Entering mem sleep
    Mar 28 10:10:36 localhost kernel: Suspending console(s) (use no_console_suspend to debug)
    Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Stopping disk
    Mar 28 10:10:36 localhost kernel: cfg80211: Calling CRDA for country: PL
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] IRQ 46 Disabled
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] Preparing suspend fglrx in kernel.
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] Suspending fglrx in kernel completed.
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] Power down the ASIC .
    Mar 28 10:10:36 localhost kernel: PM: suspend of devices complete after 1126.292 msecs
    Mar 28 10:10:36 localhost kernel: PM: late suspend of devices complete after 0.263 msecs
    Mar 28 10:10:36 localhost kernel: r8169 0000:09:00.0: System wakeup enabled by ACPI
    Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    Mar 28 10:10:36 localhost kernel: PM: noirq suspend of devices complete after 52.988 msecs
    Mar 28 10:10:36 localhost kernel: ACPI: Preparing to enter system sleep state S3
    Mar 28 10:10:36 localhost kernel: PM: Saving platform NVS memory
    Mar 28 10:10:36 localhost kernel: Disabling non-boot CPUs ...
    Mar 28 10:10:36 localhost kernel: smpboot: CPU 1 is now offline
    Mar 28 10:10:36 localhost kernel: smpboot: CPU 2 is now offline
    Mar 28 10:10:36 localhost kernel: smpboot: CPU 3 is now offline
    Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
    Mar 28 10:10:36 localhost kernel: ACPI: Low-level resume complete
    Mar 28 10:10:36 localhost kernel: PM: Restoring platform NVS memory
    Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
    Mar 28 10:10:36 localhost kernel: CPU0: Thermal monitoring handled by SMI
    Mar 28 10:10:36 localhost kernel: Enabling non-boot CPUs ...
    Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 1 APIC 0x4
    Mar 28 10:10:36 localhost kernel: CPU1: Thermal monitoring handled by SMI
    Mar 28 10:10:36 localhost kernel: CPU1 is up
    Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
    Mar 28 10:10:36 localhost kernel: CPU2: Thermal monitoring handled by SMI
    Mar 28 10:10:36 localhost kernel: CPU2 is up
    Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 3 APIC 0x5
    Mar 28 10:10:36 localhost kernel: CPU3: Thermal monitoring handled by SMI
    Mar 28 10:10:36 localhost kernel: CPU3 is up
    Mar 28 10:10:36 localhost kernel: ACPI: Waking up from system sleep state S3
    Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: MMC controller base frequency changed to 50Mhz.
    Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
    Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: MMC cards are now supported by standard SDHCI controller
    Mar 28 10:10:36 localhost kernel: PM: noirq resume of devices complete after 133.780 msecs
    Mar 28 10:10:36 localhost kernel: PM: early resume of devices complete after 0.127 msecs
    Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1a.0: setting latency timer to 64
    Mar 28 10:10:36 localhost kernel: mei 0000:00:16.0: irq 43 for MSI/MSI-X
    Mar 28 10:10:36 localhost kernel: snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    Mar 28 10:10:36 localhost kernel: pci 0000:00:1e.0: setting latency timer to 64
    Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: setting latency timer to 64
    Mar 28 10:10:36 localhost kernel: ahci 0000:00:1f.2: setting latency timer to 64
    Mar 28 10:10:36 localhost kernel: snd_hda_intel 0000:02:00.1: irq 45 for MSI/MSI-X
    Mar 28 10:10:36 localhost kernel: r8169 0000:09:00.0: System wakeup disabled by ACPI
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] Power up the ASIC
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] Preparing resume fglrx in kernel.
    Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] Resuming fglrx in kernel completed.
    Mar 28 10:10:36 localhost kernel: <6>[fglrx] IRQ 46 Enabled
    Mar 28 10:10:36 localhost kernel: ata5: SATA link down (SStatus 0 SControl 300)
    Mar 28 10:10:36 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Mar 28 10:10:36 localhost kernel: ata2.00: configured for UDMA/100
    Mar 28 10:10:36 localhost kernel: usb 2-1.3: reset low-speed USB device number 3 using ehci-pci
    Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    Mar 28 10:10:36 localhost kernel: firewire_core 0000:07:00.3: rediscovered device fw0
    Mar 28 10:10:36 localhost kernel: usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
    Mar 28 10:10:36 localhost kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Mar 28 10:10:36 localhost kernel: ata1.00: configured for UDMA/133
    Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Starting disk
    Mar 28 10:10:36 localhost kernel: PM: resume of devices complete after 2478.795 msecs
    Mar 28 10:10:36 localhost kernel: PM: Finishing wakeup.
    Mar 28 10:10:36 localhost kernel: Restarting tasks ... done.
    Mar 28 10:10:36 localhost kernel: video LNXVIDEO:00: Restoring backlight state
    Mar 28 10:10:36 localhost slim[806]: Conky: can't open /sys/class/power_supply/BAT0/uevent: No such file or directory
    Mar 28 10:10:36 localhost slim[806]: Conky: can't open /proc/acpi/battery/BAT0/state: No such file or directory
    Mar 28 10:10:36 localhost systemd-sleep[4208]: System resumed.
    Mar 28 10:10:36 localhost dbus-daemon[800]: dbus[800]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
    Mar 28 10:10:36 localhost dbus[800]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
    Mar 28 10:10:36 localhost su[4307]: (to root) root on none
    Mar 28 10:10:36 localhost su[4307]: pam_unix(su:session): session opened for user root by (uid=0)
    Mar 28 10:10:36 localhost systemd[1]: Starting Daemon for power management...
    Mar 28 10:10:36 localhost su[4307]: pam_unix(su:session): session closed for user root
    Mar 28 10:10:36 localhost su[4328]: (to root) root on none
    Mar 28 10:10:36 localhost su[4328]: pam_unix(su:session): session opened for user root by (uid=0)
    Mar 28 10:10:36 localhost su[4328]: pam_unix(su:session): session closed for user root
    Mar 28 10:10:36 localhost systemd[1]: Started Suspend.
    Mar 28 10:10:36 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
    Mar 28 10:10:36 localhost systemd[1]: Stopping Sleep.
    Mar 28 10:10:36 localhost systemd[1]: Stopped target Sleep.
    Mar 28 10:10:36 localhost systemd[1]: Starting Suspend.
    Mar 28 10:10:36 localhost systemd[1]: Reached target Suspend.
    Mar 28 10:10:36 localhost systemd-logind[796]: Operation finished.
    Mar 28 10:10:36 localhost laptop-mode[4441]: Laptop mode
    Mar 28 10:10:36 localhost laptop-mode[4446]: enabled, active [unchanged]
    Mar 28 10:10:36 localhost logger[4463]: ACPI action undefined: ACPI0003:00
    Mar 28 10:10:36 localhost laptop-mode[4501]: Laptop mode
    Mar 28 10:10:36 localhost laptop-mode[4509]: enabled, active [unchanged]
    Mar 28 10:10:36 localhost laptop-mode[4534]: Laptop mode
    Mar 28 10:10:36 localhost laptop-mode[4539]: enabled, active [unchanged]
    Mar 28 10:10:36 localhost laptop-mode[4554]: Laptop mode
    Mar 28 10:10:36 localhost laptop-mode[4557]: enabled, active [unchanged]
    Mar 28 10:10:36 localhost laptop-mode[4562]: Laptop mode
    Mar 28 10:10:36 localhost laptop-mode[4563]: enabled, active [unchanged]
    Mar 28 10:10:36 localhost dbus-daemon[800]: dbus[800]: [system] Successfully activated service 'org.freedesktop.UPower'
    Mar 28 10:10:36 localhost dbus[800]: [system] Successfully activated service 'org.freedesktop.UPower'
    Mar 28 10:10:36 localhost systemd[1]: Started Daemon for power management.
    Mar 28 10:10:37 localhost ntpd[1442]: Deleting interface #3 eth1, 192.168.1.6#123, interface stats: received=135, sent=135, dropped=1, active_time=4197 secs
    Mar 28 10:10:37 localhost ntpd[1442]: 149.156.70.60 interface 192.168.1.6 -> (none)
    Mar 28 10:10:37 localhost ntpd[1442]: 149.156.24.40 interface 192.168.1.6 -> (none)
    Mar 28 10:10:37 localhost ntpd[1442]: 46.250.172.2 interface 192.168.1.6 -> (none)
    Mar 28 10:10:37 localhost ntpd[1442]: peers refreshed
    Mar 28 10:10:38 localhost su[4624]: (to root) root on none
    Mar 28 10:10:38 localhost su[4624]: pam_unix(su:session): session opened for user root by (uid=0)
    Mar 28 10:10:38 localhost laptop-mode[4653]: Laptop mode
    Mar 28 10:10:38 localhost laptop-mode[4654]: enabled, active [unchanged]
    Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: carrier acquired
    Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
    Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: rebinding lease of 192.168.1.6
    Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: acknowledged 192.168.1.6 from 192.168.1.1 `TP-LINK'
    Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: checking for 192.168.1.6
    Mar 28 10:10:38 localhost su[4624]: pam_unix(su:session): session closed for user root
    Mar 28 10:10:38 localhost su[4660]: (to root) root on none
    Mar 28 10:10:38 localhost su[4660]: pam_unix(su:session): session opened for user root by (uid=0)
    Mar 28 10:10:38 localhost su[4660]: pam_unix(su:session): session closed for user root
    Mar 28 10:10:38 localhost kernel: EXT4-fs (sda6): re-mounted. Opts: commit=0
    Mar 28 10:10:38 localhost kernel: EXT4-fs (sda7): re-mounted. Opts: commit=0
    Mar 28 10:10:38 localhost laptop-mode[4694]: Laptop mode
    Mar 28 10:10:38 localhost laptop-mode[4695]: enabled, active [unchanged]
    Mar 28 10:10:38 localhost logger[4698]: ACPI action undefined: ACPI0003:00
    Mar 28 10:10:38 localhost slim[806]: tint2 : invalid option "task_margin",
    Mar 28 10:10:38 localhost slim[806]: upgrade tint2 or correct your config file
    Mar 28 10:10:38 localhost slim[806]: tint2 : nb monitor 1, nb monitor used 1, nb desktop 1
    Mar 28 10:10:38 localhost slim[806]: X Error of failed request: BadWindow (invalid Window parameter)
    Mar 28 10:10:38 localhost slim[806]: Major opcode of failed request: 21 (X_ListProperties)
    Mar 28 10:10:38 localhost slim[806]: Resource id in failed request: 0x18000b0
    Mar 28 10:10:38 localhost slim[806]: Serial number of failed request: 12
    Mar 28 10:10:38 localhost slim[806]: Current serial number in output stream: 12
    Mar 28 10:10:40 localhost slim[806]: you have no weather alerts
    Mar 28 10:10:40 localhost slim[806]: processing complete
    Mar 28 10:10:40 localhost slim[806]: gathering data with curl
    Mar 28 10:10:40 localhost slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
    Mar 28 10:10:40 localhost slim[806]: Dload Upload Total Spent Left Speed
    Mar 28 10:10:40 localhost slim[806]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: (nil); Unknown error
    Mar 28 10:10:40 localhost slim[806]: not checking for alerts
    Mar 28 10:10:40 localhost slim[806]: curl attempt timed out, trying again
    Mar 28 10:10:40 localhost slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
    Mar 28 10:10:40 localhost slim[806]: Dload Upload Total Spent Left Speed
    Mar 28 10:10:40 localhost slim[806]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: (nil); Unknown error
    Mar 28 10:10:42 localhost dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
    Mar 28 10:10:43 localhost dhcpcd[1435]: eth1: leased 192.168.1.6 for 259200 seconds
    Mar 28 10:10:45 dhcppc4 ntpd[1442]: Listen normally on 6 eth1 192.168.1.6 UDP 123
    Mar 28 10:10:45 dhcppc4 ntpd[1442]: peers refreshed
    Mar 28 10:10:45 dhcppc4 ntpd[1442]: new interface(s) found: waking up resolver
    Mar 28 10:10:45 dhcppc4 slim[806]: Traceback (most recent call last):
    Mar 28 10:10:45 dhcppc4 slim[806]: File "/home/rlk120/.scripts/gmail.py", line 9, in <module>
    Mar 28 10:10:45 dhcppc4 slim[806]: msg=temp.read()
    Mar 28 10:10:45 dhcppc4 slim[806]: File "/usr/lib/python3.3/encodings/ascii.py", line 26, in decode
    Mar 28 10:10:45 dhcppc4 slim[806]: return codecs.ascii_decode(input, self.errors)[0]
    Mar 28 10:10:45 dhcppc4 slim[806]: UnicodeDecodeError: 'ascii' codec can't decode byte 0xc5 in position 375: ordinal not in range(128)
    Mar 28 10:10:45 dhcppc4 slim[806]: not checking for alerts
    Mar 28 10:10:45 dhcppc4 slim[806]: curl attempt timed out, trying again
    Mar 28 10:10:45 dhcppc4 slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
    Mar 28 10:10:45 dhcppc4 slim[806]: Dload Upload Total Spent Left Speed
    Mar 28 10:10:46 dhcppc4 slim[806]: [234B blob data]
    Mar 28 10:10:46 dhcppc4 dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
    Mar 28 10:10:50 dhcppc4 dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
    Mar 28 10:10:50 dhcppc4 dhcpcd[1435]: eth1: no IPv6 Routers available
    Mar 28 10:11:03 dhcppc4 slim[806]: No protocol specified
    Mar 28 10:11:03 dhcppc4 slim[806]: (chromium:4750): Gtk-WARNING **: cannot open display: :0.0
    Mar 28 10:11:31 dhcppc4 systemd-logind[796]: System is rebooting.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Sound Card.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Sound Card.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Daemon for power management...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Authorization Manager...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Graphical Interface.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Graphical Interface.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Multi-User.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Multi-User.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping ACPI event daemon...
    Mar 28 10:11:32 dhcppc4 ntpd[1442]: ntpd exiting on signal 15
    Mar 28 10:11:32 dhcppc4 acpid[793]: exiting
    Mar 28 10:11:32 dhcppc4 dhcpcd[4810]: sending signal 1 to pid 1435
    Mar 28 10:11:32 dhcppc4 dhcpcd[4810]: waiting for pid 1435 to exit
    Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: received SIGHUP, releasing
    Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: eth1: releasing lease of 192.168.1.6
    Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: eth1: removing interface
    Mar 28 10:11:33 dhcppc4 slim[806]: Conky: received SIGHUP or SIGUSR1. reloading the config file.
    Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
    Mar 28 10:11:33 dhcppc4 slim[806]: after 200200 requests (200197 known processed) with 0 events remaining.
    Mar 28 10:11:33 dhcppc4 slim[806]: Conky: received SIGHUP or SIGUSR1. reloading the config file.
    Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 4 (Interrupted system call) on X server ":0.0"
    Mar 28 10:11:33 dhcppc4 slim[806]: after 226 requests (226 known processed) with 0 events remaining.
    Mar 28 10:11:33 dhcppc4 slim[806]: real transparency off.... depth: 24
    Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Found crtc's: 4
    Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Linking output LVDS with crtc 0
    Mar 28 10:11:33 dhcppc4 slim[806]: real transparency off.... depth: 24
    Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Found crtc's: 4
    Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Linking output LVDS with crtc 0
    Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
    Mar 28 10:11:33 dhcppc4 slim[806]: after 534585 requests (534585 known processed) with 0 events remaining.
    Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
    Mar 28 10:11:33 dhcppc4 slim[806]: after 163909 requests (163909 known processed) with 0 events remaining.
    Mar 28 10:11:33 dhcppc4 slim[806]: you have no weather alerts
    Mar 28 10:11:33 dhcppc4 slim[806]: processing complete
    Mar 28 10:11:33 dhcppc4 kernel: cfg80211: Calling CRDA to update world regulatory domain
    Mar 28 10:11:33 dhcppc4 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
    Mar 28 10:11:33 dhcppc4 netcfg-daemon[4777]: :: siec_domowa down [done]
    Mar 28 10:11:33 dhcppc4 slim[806]: Server terminated successfully (0). Closing log file.
    Mar 28 10:11:33 dhcppc4 laptop-mode[4865]: Laptop mode
    Mar 28 10:11:33 dhcppc4 laptop-mode[4866]: enabled, active [unchanged]
    Mar 28 10:11:34 dhcppc4 systemd[1]: slim.service: main process exited, code=exited, status=1/FAILURE
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped SLiM Simple Login Manager.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Unit slim.service entered failed state
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Permit User Sessions...
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Permit User Sessions.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Basic System.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Basic System.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Daily Cleanup of Temporary Directories.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Sockets.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Sockets.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping LVM2 metadata daemon socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed LVM2 metadata daemon socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Device-mapper event daemon FIFOs.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Device-mapper event daemon FIFOs.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Syslog Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Syslog Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping ACPID Listen Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed ACPID Listen Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping D-Bus System Message Bus Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed D-Bus System Message Bus Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping System Initialization.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target System Initialization.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Load Kernel Modules...
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Load Kernel Modules.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Apply Kernel Variables...
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Apply Kernel Variables.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Setup Virtual Console...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Setup Virtual Console.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Set Up Additional Binary Formats...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Set Up Additional Binary Formats.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Encrypted Volumes.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Encrypted Volumes.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Swap.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Swap.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /home...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /tmp...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remote File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Remote File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /tmp.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /home.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Unmount All Filesystems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
    Mar 28 10:11:35 dhcppc4 systemd[1]: Set hardware watchdog to 10min.
    Mar 28 10:11:35 dhcppc4 kernel: watchdog watchdog0: watchdog did not stop!
    Mar 28 10:11:35 dhcppc4 systemd-journal[131]: Journal stopped
    Somebody probably find interesting things in this code.
    And here is some fail slim:
    # journalctl /usr/lib/systemd/systemd --since=today
    -- Logs begin at Mon 2012-09-10 20:20:07 CEST, end at Thu 2013-03-28 10:37:18 CET. --
    Mar 28 10:10:36 localhost systemd[1]: Time has been changed
    Mar 28 10:10:36 localhost systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
    Mar 28 10:10:36 localhost systemd[1]: Starting Daemon for power management...
    Mar 28 10:10:36 localhost systemd[1]: Started Suspend.
    Mar 28 10:10:36 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
    Mar 28 10:10:36 localhost systemd[1]: Stopping Sleep.
    Mar 28 10:10:36 localhost systemd[1]: Stopped target Sleep.
    Mar 28 10:10:36 localhost systemd[1]: Starting Suspend.
    Mar 28 10:10:36 localhost systemd[1]: Reached target Suspend.
    Mar 28 10:10:36 localhost systemd[1]: Started Daemon for power management.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Sound Card.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Sound Card.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Daemon for power management...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Authorization Manager...
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Graphical Interface.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Graphical Interface.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Multi-User.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Multi-User.
    Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping ACPI event daemon...
    Mar 28 10:11:34 dhcppc4 systemd[1]: slim.service: main process exited, code=exited, status=1/FAILURE
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped SLiM Simple Login Manager.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Unit slim.service entered failed state
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Permit User Sessions...
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Permit User Sessions.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Basic System.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Basic System.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Daily Cleanup of Temporary Directories.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Sockets.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Sockets.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping LVM2 metadata daemon socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed LVM2 metadata daemon socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Device-mapper event daemon FIFOs.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Device-mapper event daemon FIFOs.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Syslog Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Syslog Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping ACPID Listen Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed ACPID Listen Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping D-Bus System Message Bus Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Closed D-Bus System Message Bus Socket.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping System Initialization.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target System Initialization.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Load Kernel Modules...
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Load Kernel Modules.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Apply Kernel Variables...
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Apply Kernel Variables.
    Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Setup Virtual Console...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Setup Virtual Console.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Set Up Additional Binary Formats...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Set Up Additional Binary Formats.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Encrypted Volumes.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Encrypted Volumes.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Swap.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Swap.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /home...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /tmp...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remote File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Remote File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /tmp.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /home.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Unmount All Filesystems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
    Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
    Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
    Mar 28 10:11:35 dhcppc4 systemd[1]: Set hardware watchdog to 10min.
    Last edited by xorgx3 (2013-03-28 10:52:08)

  • Help with bash script that fails after suspend to RAM

    I have a very simple reminder script that uses an endless loop, sleep and zenity to pop up a reminder every twenty minutes:
    #!/bin/bash
    while true;
    do
    sleep 20m
    zenity --warning --title="Ergonomics Reminder" --text="Check Posture or Have a Stretch!"
    done
    However, it does not work as it should after suspending to RAM. I am thinking I need to kill the process and restart it after every suspend, using a "thaw" notice in /etc/pm but if there is an easier way to do it please let me know!

    I'm doing this for 2 reasons:
    - as a scripting exercise
    - because the local repo is a shared wordpress mess and people forget to make commits so I'd like a local backup that includes all changes that may not be in github (sadly).
    Anyhow, thanks for the input about trap, I'm definitely confused by it's use at this point but have reworked the script without it.
    #!/bin/sh
    set -e #Exit on any error.
    TIME=`date +"%m.%d.%Y@%H:%M:%S"` # Define the TIME variable as today's date and time.
    MONTH=`date +"%b"` # Define MONTH as today's month.
    FILENAME="backup-$TIME.tar.gz" # Define the filename structure.
    SRCDIR="/stuff" # Define folder to backup.
    DESDIR="/Backup/$MONTH/" # Define the backup folder location.
    LOGFILE="$DESDIR/backup-$TIME.log" # Store the output in a log.
    REMOTE=$(git ls-remote -h origin master | awk '{print $1}') # Get commit hash from head of remote master repo (github)
    LOCAL=$(git rev-parse HEAD) # Get commit hash from head of server repo (dev/test)
    if [[ $LOCAL == $REMOTE ]]; then # If the hashes match
    echo "No update required." >> $LOGFILE # Then no pull is needed
    else # If the hashes don't match then prepare to run our backup
    mkdir -p $DESDIR # Create our directory if it doesn't exist.
    echo "Backup started for "$TIME >> $LOGFILE # Make it log what it's doing.
    tar -cpzf $DESDIR/$FILENAME $SRCDIR >> $LOGFILE 2>&1 # Perform the backup.
    echo "Backup Finished for "$TIME >> $LOGFILE # Log that it's finished.
    echo "Preparing for git pull " >> $LOGFILE #Log what we're doing.
    cd /stuff >> $LOGFILE 2>&1 # Make sure we're in our repo directory
    git pull >> $LOGFILE 2>&1
    echo "Git pull completed successfully. " >> $LOGFILE
    mail -s "Backup log `date`" [email protected] < $LOGFILE # Email the output to me.
    fi

  • [SOLVED]No keyboard after suspend (xfce)

    I have a problem similar but not identical to this: https://bbs.archlinux.org/viewtopic.php?id=155722
    When I resume after suspending, the keyboard doesn't work. Unlike the cited thread, this only happens after suspend but happens either every time or nearly every time I resume after suspending. This is quite annoying because I prefer to suspend when the laptop is closed. The touchpad is also disabled after suspend, although I use a USB mouse anyway.
    My specs (everything is up to date as of yesterday [1/15/15]):
    Xfce on a Toshiba Satellite p55t-a5116 (specs here)
    it's dual-partitioned (with Windows 8.1) as well, if that matters, and this install exists on a logical partition rather than a primary one.
    the following packages are [explicitly] installed:
    alsa-utils 1.0.28-1
    asoundconf 1:1.0.1-3
    aurget 4.4.3-1
    autoconf 2.69-2
    automake 1.14.1-1
    bash 4.3.030-1
    binutils 2.25-1
    bison 3.0.2-1
    bluez 5.27-1
    bzip2 1.0.6-5
    cheese 3.14.2-1
    coreutils 8.23-1
    cryptsetup 1.6.6-1
    device-mapper 2.02.114-1
    dhcpcd 6.6.7-1
    dialog 1:1.2_20140911-1
    diffutils 3.3-2
    dosfstools 3.0.27-1
    dropbox 3.0.5-1
    e2fsprogs 1.42.12-1
    eclipse 4.4.1-1
    exo 0.10.2-2
    fakeroot 1.20.2-1
    file 5.21-3
    filesystem 2014.10-3
    findutils 4.4.2-6
    firefox 34.0.5-1
    flashplugin 11.2.202.425-1
    flex 2.5.39-1
    frame 2.5.0-1
    garcon 0.2.1-1
    gawk 4.1.1-1
    gcc 4.9.2-2
    gcc-libs 4.9.2-2
    geis 2.2.16-1
    gettext 0.19.3-1
    glibc 2.20-6
    grail 3.1.0-1
    grep 2.21-1
    groff 1.22.3-2
    gtk2-xfce-engine 3.0.1-2
    gtk3-xfce-engine 3.0.1-2
    gummiboot 45-1
    gzip 1.6-1
    haskell-regex-pcre-builtin 0.94.4.8.8.35-1
    haskell-split 0.2.2-1
    inetutils 1.9.2-2
    inkscape 0.48.5-4
    iproute2 3.17.0-1
    iputils 20121221-3
    iw 3.17-1
    jack2-dbus 1.9.10-1
    java-runtime-common 2-2
    jdk7-openjdk 7.u71_2.5.3-3
    jdk8-openjdk 8.u25-2
    jfsutils 1.1.15-4
    jre 8u25-1
    lastpass 3.1.50-17
    less 471-1
    lib32-mesa-libgl 10.4.1-1
    libreoffice-fresh 4.3.5-1
    libtool 2.4.4-2
    libva-intel-driver 1.5.0-1
    licenses 20140629-1
    lightdm 1:1.12.2-1
    lightdm-gtk3-greeter 1:1.8.6-1
    linux 3.17.6-1
    logrotate 3.8.8-2
    lvm2 2.02.114-1
    m4 1.4.17-1
    make 4.1-1
    man-db 2.7.1-1
    man-pages 3.76-1
    mdadm 3.3.2-1
    minecraft latest-23
    mousepad 0.3.0-3
    nano 2.2.6-3
    netctl 1.9-1
    network-manager-applet 0.9.10.0-2
    networkmanager 0.9.10.0-4
    ntfs-3g 2014.2.15-1
    openssh 6.7p1-1
    orage 4.10.0-1
    package-query 1.5-2
    pacman 4.2.0-5
    patch 2.7.1-3
    pavucontrol 2.0-2
    pciutils 3.3.0-1
    pcmciautils 018-7
    perl 5.20.1-1
    pkg-config 0.28-2
    procps-ng 3.3.10-1
    psmisc 22.21-2
    pulseaudio 5.0-1
    pulseaudio-alsa 2-3
    qbittorrent 3.1.11-2
    qjackctl 0.3.12-1
    reiserfsprogs 3.6.24-1
    ristretto 0.6.3-4
    s-nail 14.7.11-1
    sed 4.2.2-3
    shadow 4.2.1-1
    skype 4.3.0.37-3
    sudo 1.8.11.p2-1
    sysfsutils 2.1.0-9
    systemd-sysvcompat 218-1
    tar 1.28-1
    texinfo 5.2-3
    thunar 1.6.4-1
    thunar-archive-plugin 0.3.1-4
    thunar-dropbox 0.2.0-1
    thunar-media-tags-plugin 0.2.1-1
    thunar-volman 0.8.0-2
    touchegg 1.1.1-3
    ttf-liberation 2.00.1-5
    ttf-ms-fonts 2.0-10
    ttf-ubuntu-font-family 0.80-5
    tumbler 0.1.30-1
    usbutils 008-1
    util-linux 2.25.2-1
    vi 1:050325-4
    vlc 2.1.5-5
    which 2.20-7
    wpa_actiond 1.4-2
    wpa_supplicant 2.3-1
    xf86-input-egalax 2.5.4330-2
    xf86-input-joystick 1.6.2-5
    xf86-input-keyboard 1.8.0-3
    xf86-input-mouse 1.9.1-1
    xf86-input-synaptics 1.8.1-1
    xf86-input-vmmouse 13.0.0-5
    xf86-input-void 1.4.0-7
    xf86-video-ark 0.7.5-5
    xf86-video-ast 0.97.0-5
    xf86-video-ati 1:7.5.0-1
    xf86-video-cirrus 1.5.2-4
    xf86-video-dummy 0.3.7-3
    xf86-video-fbdev 0.4.4-3
    xf86-video-glint 1.2.8-5
    xf86-video-i128 1.3.6-5
    xf86-video-intel 2.99.917-1
    xf86-video-mach64 6.9.4-4
    xf86-video-mga 1.6.3-3
    xf86-video-modesetting 0.9.0-2
    xf86-video-neomagic 1.2.8-3
    xf86-video-nouveau 1.0.11-2
    xf86-video-nv 2.1.20-5
    xf86-video-openchrome 0.3.3-4
    xf86-video-r128 6.9.2-3
    xf86-video-savage 2.3.7-3
    xf86-video-siliconmotion 1.7.7-5
    xf86-video-sis 0.10.7-6
    xf86-video-tdfx 1.4.5-5
    xf86-video-trident 1.3.6-6
    xf86-video-v4l 0.2.0-14
    xf86-video-vesa 2.3.2-5
    xf86-video-vmware 13.0.2-2
    xf86-video-voodoo 1.2.5-5
    xfburn 0.5.2-1
    xfce4-appfinder 4.10.1-1
    xfce4-artwork 0.1.1a_git20110420-4
    xfce4-battery-plugin 1.0.5-3
    xfce4-clipman-plugin 1.2.6-1
    xfce4-cpufreq-plugin 1.1.1-1
    xfce4-cpugraph-plugin 1.0.5-2
    xfce4-datetime-plugin 0.6.2-3
    xfce4-dict 0.7.0-1
    xfce4-diskperf-plugin 2.5.4-2
    xfce4-eyes-plugin 4.4.3-1
    xfce4-fsguard-plugin 1.0.1-3
    xfce4-genmon-plugin 3.4.0-2
    xfce4-mailwatch-plugin 1.2.0-4
    xfce4-mixer 4.11.0-1
    xfce4-mount-plugin 0.6.7-2
    xfce4-mpc-plugin 0.4.4-3
    xfce4-netload-plugin 1.2.4-1
    xfce4-notes-plugin 1.7.7-6
    xfce4-notifyd 0.2.4-1
    xfce4-panel 4.10.1-1
    xfce4-power-manager 1.4.2-2
    xfce4-quicklauncher-plugin 1.9.4-9
    xfce4-screenshooter 1.8.1-2
    xfce4-sensors-plugin 1.2.5-2
    xfce4-session 4.10.1-5
    xfce4-settings 4.10.1-1
    xfce4-smartbookmark-plugin 0.4.5-2
    xfce4-systemload-plugin 1.1.2-1
    xfce4-taskmanager 1.1.0-1
    xfce4-terminal 0.6.3-1
    xfce4-time-out-plugin 1.0.1-4
    xfce4-timer-plugin 1.6.0-1
    xfce4-verve-plugin 1.0.0-5
    xfce4-wavelan-plugin 0.5.11-2
    xfce4-weather-plugin 0.8.5-1
    xfce4-xkb-plugin 0.5.6-1
    xfconf 4.10.0-4
    xfdesktop 4.10.3-2
    xfsprogs 3.2.2-1
    xfwm4 4.10.1-1
    xfwm4-themes 4.10.0-2
    xorg-fonts-100dpi 1.0.3-2
    xorg-server 1.16.3-2
    EDIT: after a brief test, it appears that this only happens sometimes, but tends to happen more often (read: almost always) on longer suspends (>30 seconds).
    Last edited by sudo999 (2015-01-16 17:57:32)

    I solved this on my own, so I'm posting the solution here in case anyone else has the same problem. Apparently xfce4-power-manager and systemd were both creating suspend events at the same time, causing problems loading modules like keyboard drivers upon resuming. The solution is in a small section of the wiki in the article on xfce, reproduced here:
    Multiple suspend events
    If using xfce4-power-manager to control ACPI events, and not systemd, edit /etc/systemd/logind.conf:
    HandlePowerKey=ignore
    HandleSuspendKey=ignore
    HandleHibernateKey=ignore
    HandleLidSwitch=ignore
    After I did this, the problem disappeared.

  • Internal Server Error after implemeting a Merged Appl_top

    Hi folks,
    I have been plagued by an issue since a long time. I'm implementing a merged appltop on sun solaris (5.10) on 11.5.10.2
    Basically its a clone of two nodes into a single node. After merging, the services are coming up good. Apache is running well. But when opening the AppsLogin page, it is blowing up saying Internal Server Error.
    When looked into the mod_jserv.log, it shows the below error.
    [07/02/2012 10:28:28:718] (ERROR) ajp12: Servlet Error: OracleJSP: oracle.jsp.provider.JspCompileException: Errors compiling:/d05/ufindev/ufindevcomn1/_pages/_oa__html//_AppsLocalLogin.java<TABLE BORDER=1 WIDTH=100%><TR><TH>Line #</TH><TH>Error</TH></TR><TR><TD WIDTH=7% VALIGN=TOP>259<TD> isRtl(java.lang.String) has protected access in oracle.apps.fnd.sso.SessionMgr if (SessionMgr.isRtl(langCode)) {                                 </TD></TR></TABLE>
    [07/02/2012 10:28:28:718] (ERROR) an error returned handling request via protocol "ajpv12"
    [07/02/2012 10:28:28:718] (INFO) balance: continuing to u64findev.motel6.com:16440
    [07/02/2012 10:28:28:719] (ERROR) balance: 10297 internal servlet error in server u64findev.motel6.com:16440
    [07/02/2012 10:28:28:719] (ERROR) an error returned handling request via protocol "balance"
    Any idea whats going wrong?
    Thanks,
    Lakshman.
    Edited by: 912983 on Feb 7, 2012 1:54 PM

    Have you completed all the steps in (Cloning Oracle Applications Release 11i with Rapid Clone [ID 230672.1] -- Reducing the number of Nodes of a Multi-Node System (merge APPL_TOP)) and (Sharing the Application Tier File System in Oracle Applications Release 11i [ID 233428.1] -- Section 4: Merging existing APPL_TOPs into a single APPL_TOP) with no errors?
    Can you find any errors in the database log file?
    Was AutoConfig completed successfully?
    Please clear the server cache as per (How To Clear Server Cache and Bounce Apache (Web Server)? [ID 295484.1]) and check then.
    Also, please see these docs.
    Insternal server error After Patch9578141 CPU PATCH FOR JULY 2010 [ID 1221603.1]
    Accessing web pages, randomly get Internal Server Error [ID 1374874.1]
    Internal Server Error When Trying To Enter The Processed Date In The Adjust Form [ID 549511.1]
    Thanks,
    Hussein

  • [SOLVED] Losing network connection after suspend

    Lately I'm having this peculiar problem.  When resuming after suspend (specifically, pm-suspend), I have no network connection.  I first noticed this on March 31st.  The only thing that changed was that I upgraded these packages:
    openssl-1.0.1-2-x86_64.pkg.tar.xz
    xf86-video-ati-6.14.4-2-x86_64.pkg.tar.xz
    lib32-libdrm-2.4.33-1-x86_64.pkg.tar.xz
    libnotify-0.7.5-1-x86_64.pkg.tar.xz
    xz-5.0.3-2-x86_64.pkg.tar.xz
    vim-taglist-45-5-any.pkg.tar.xz
    But I'm pretty sure I would have suspended and resumed successfully at least once after that upgrade.
    Can anyone suggest what I should look at to try to diagnose this?
    Thanks
    Last edited by ibrunton (2012-04-06 11:26:03)

    Same issue here. Looks like dhcpcd crashes during or after running /usr/lib/dhcpcd/dhcpcd-run-hooks on resume from suspend. I'll try downgrading until this is fixed.
    $ uname -s -v -r -m
    Linux 3.2.13-1-ARCH #1 SMP PREEMPT Sat Mar 24 09:10:39 CET 2012 x86_64
    $ pacman -Qi dhcpcd
    Name : dhcpcd
    Version : 5.5.5-1
    URL : http://roy.marples.name/dhcpcd/
    Licenses : BSD
    Groups : base
    Provides : None
    Depends On : glibc sh
    Optional Deps : None
    Required By : networkmanager
    Conflicts With : None
    Replaces : None
    Installed Size : 256.00 KiB
    Packager : Ronald van Haren <[email protected]>
    Architecture : x86_64
    Build Date : Fri Mar 23 17:25:47 2012
    Install Date : Thu Mar 29 23:36:13 2012
    Install Reason : Explicitly installed
    Install Script : No
    Description : RFC2131 compliant DHCP client daemon
    # dhcpcd -d -B eth0
    dhcpcd[1865]: version 5.5.5 starting
    dhcpcd[1865]: eth0: using hwaddr bc:ae:c5:75:36:8e
    dhcpcd[1865]: eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason PREINIT
    dhcpcd[1865]: eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason CARRIER
    dhcpcd[1865]: eth0: sending IPv6 Router Solicitation
    dhcpcd[1865]: eth0: reading lease `/var/lib/dhcpcd/dhcpcd-eth0.lease'
    dhcpcd[1865]: eth0: rebinding lease of 192.168.1.100
    dhcpcd[1865]: eth0: sending REQUEST (xid 0x36169f23), next in 3.93 seconds
    dhcpcd[1865]: eth0: acknowledged 192.168.1.100 from 192.168.1.1
    dhcpcd[1865]: eth0: checking for 192.168.1.100
    dhcpcd[1865]: eth0: sending ARP probe (1 of 3), next in 2.00 seconds
    dhcpcd[1865]: eth0: sending ARP probe (2 of 3), next in 1.81 seconds
    dhcpcd[1865]: eth0: sending IPv6 Router Solicitation
    dhcpcd[1865]: eth0: sending ARP probe (3 of 3), next in 2.00 seconds
    dhcpcd[1865]: eth0: leased 192.168.1.100 for 3600 seconds
    dhcpcd[1865]: eth0: adding IP address 192.168.1.100/24
    dhcpcd[1865]: eth0: adding route to 192.168.1.0/24
    dhcpcd[1865]: eth0: adding default route via 192.168.1.1
    dhcpcd[1865]: eth0: writing lease `/var/lib/dhcpcd/dhcpcd-eth0.lease'
    dhcpcd[1865]: eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason BOUND
    dhcpcd[1865]: eth0: sending ARP announce (1 of 2), next in 2.00 seconds
    dhcpcd[1865]: eth0: sending IPv6 Router Solicitation
    dhcpcd[1865]: eth0: sending ARP announce (2 of 2)
    dhcpcd[1865]: eth0: sending IPv6 Router Solicitation
    dhcpcd[1865]: eth0: no IPv6 Routers available
    dhcpcd[1865]: eth0: carrier lost
    dhcpcd[1865]: eth0: deleting default route via 192.168.1.1
    dhcpcd[1865]: eth0: deleting route to 192.168.1.0/24
    dhcpcd[1865]: eth0: deleting IP address 192.168.1.100/24
    dhcpcd[1865]: eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason NOCARRIER
    dhcpcd[1865]: eth0: carrier acquired
    dhcpcd[1865]: eth0: using hwaddr bc:ae:c5:75:36:8e
    dhcpcd[1865]: eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason CARRIER
    *** glibc detected *** dhcpcd: double free or corruption (fasttop): 0x0000000000ac2860 ***
    ======= Backtrace: =========
    /lib/libc.so.6(+0x78a56)[0x7f9b6a794a56]
    dhcpcd[0x40cdd0]
    dhcpcd[0x40e597]
    dhcpcd[0x4093f0]
    dhcpcd[0x411ba7]
    dhcpcd[0x411563]
    dhcpcd[0x40768f]
    dhcpcd[0x40aa6b]
    dhcpcd[0x4028a8]
    /lib/libc.so.6(__libc_start_main+0xf5)[0x7f9b6a73d455]
    dhcpcd[0x402d1d]
    ======= Memory map: ========
    00400000-00419000 r-xp 00000000 fe:02 4590719 /sbin/dhcpcd
    00619000-0061a000 r--p 00019000 fe:02 4590719 /sbin/dhcpcd
    0061a000-0061b000 rw-p 0001a000 fe:02 4590719 /sbin/dhcpcd
    0061b000-0061c000 rw-p 00000000 00:00 0
    00ac1000-00ae3000 rw-p 00000000 00:00 0 [heap]
    7f9b6a2eb000-7f9b6a300000 r-xp 00000000 fe:02 1063993 /usr/lib/libgcc_s.so.1
    7f9b6a300000-7f9b6a4ff000 ---p 00015000 fe:02 1063993 /usr/lib/libgcc_s.so.1
    7f9b6a4ff000-7f9b6a500000 rw-p 00014000 fe:02 1063993 /usr/lib/libgcc_s.so.1
    7f9b6a500000-7f9b6a517000 r-xp 00000000 fe:02 3014810 /lib/libpthread-2.15.so
    7f9b6a517000-7f9b6a716000 ---p 00017000 fe:02 3014810 /lib/libpthread-2.15.so
    7f9b6a716000-7f9b6a717000 r--p 00016000 fe:02 3014810 /lib/libpthread-2.15.so
    7f9b6a717000-7f9b6a718000 rw-p 00017000 fe:02 3014810 /lib/libpthread-2.15.so
    7f9b6a718000-7f9b6a71c000 rw-p 00000000 00:00 0
    7f9b6a71c000-7f9b6a8b3000 r-xp 00000000 fe:02 3018245 /lib/libc-2.15.so
    7f9b6a8b3000-7f9b6aab3000 ---p 00197000 fe:02 3018245 /lib/libc-2.15.so
    7f9b6aab3000-7f9b6aab7000 r--p 00197000 fe:02 3018245 /lib/libc-2.15.so
    7f9b6aab7000-7f9b6aab9000 rw-p 0019b000 fe:02 3018245 /lib/libc-2.15.so
    7f9b6aab9000-7f9b6aabd000 rw-p 00000000 00:00 0
    7f9b6aabd000-7f9b6aac4000 r-xp 00000000 fe:02 3014856 /lib/librt-2.15.so
    7f9b6aac4000-7f9b6acc3000 ---p 00007000 fe:02 3014856 /lib/librt-2.15.so
    7f9b6acc3000-7f9b6acc4000 r--p 00006000 fe:02 3014856 /lib/librt-2.15.so
    7f9b6acc4000-7f9b6acc5000 rw-p 00007000 fe:02 3014856 /lib/librt-2.15.so
    7f9b6acc5000-7f9b6ace6000 r-xp 00000000 fe:02 3018769 /lib/ld-2.15.so
    7f9b6aea5000-7f9b6aea9000 rw-p 00000000 00:00 0
    7f9b6aee4000-7f9b6aee6000 rw-p 00000000 00:00 0
    7f9b6aee6000-7f9b6aee7000 r--p 00021000 fe:02 3018769 /lib/ld-2.15.so
    7f9b6aee7000-7f9b6aee8000 rw-p 00022000 fe:02 3018769 /lib/ld-2.15.so
    7f9b6aee8000-7f9b6aee9000 rw-p 00000000 00:00 0
    7ffff8b93000-7ffff8bb4000 rw-p 00000000 00:00 0 [stack]
    7ffff8bc9000-7ffff8bca000 r-xp 00000000 00:00 0 [vdso]
    ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]

  • Wireless not working after suspend (madwifi)

    Hi there
    I successfully converted from Vista to Archlinux! Everything's working fine (yep, I'm a bit proud as this my second try at linux ) except that after I suspend with powersave my wlan is not working anymore. I've also tried to unload the ath_pci module and restart the network in /etc/powersave/sleep but that doesn't seem to work.
    I guess it has something to do with the network deamon because when I try to restart my network manually it says that dhcpcd is already running for ath0... Oh, and also the iwconfig for ath0 seems to be perfectly correct after suspend...
    Here's the network part of my rc.conf:
    lo="lo 127.0.0.1"
    eth0="dhcp"
    ath0="dhcp"
    wlan_ath0="ath0 essid FeelGood key s:******"
    WLAN_INTERFACES=(ath0)
    INTERFACES=(lo !eth0 ath0)
    Any ideas? Help would be appreciated

    Well, maybe you already know this, but: ath_pci (the madwifi driver) is among blacklisted modules (/etc/hibernate/blacklisted-modules), so it gets unloaded during the suspend process. That screws up whatever wireless connection you might have had before suspending. Now if you have the option LoadModules auto in /etc/hibernate/common.conf, it should get loaded after resuming - but that of course doesn't renew the connection. So that I do is I have a short script that calls /etc/rc.d/network restart, and I run it manually after suspending to renew the connections.
    BTW, I have this in /etc/hibernate/common.conf:
    UnloadBlacklistedModules yes
    LoadModules auto
    EDIT: Eh, B managed to post before I finished writing this :)
    Last edited by bender02 (2007-05-05 14:32:11)

Maybe you are looking for