X-tended dynamic range versus x-tended dynamic range pro: what's the difference?

What is the difference between X-tended dynamic range, Sony's version of HDR, and X-tended dyanmic range pro?  

Hello,
The PCI-4472 would be best suited for vibration measurments. It has 24-bit resolution, Simultaneous Sampling, Hardware Time-to-Frequency Domain Conversion, 110 dB Dynamic Range, and hardware filtering. See the following Link for more details on the 4472: http://sine.ni.com/apps/we/nioc.vp?cid=10572〈=US
The 6289 was not built with vibration analysis in mind, the the dynamic range is not spec'd.
Let me know if you have any further questions.
Sean C.

Similar Messages

  • What is the difference between "create set" and "create dynamic set"?

    What is the difference between  "create set" and "create dynamic set"?
    we have a complete cube ready for production that was tested and working without any issues in non-r2. we found that some "create set" assignments don't work in R2. But when changed to from  "create set" to "create dynamic set"?
    they are working, However, not sure how it will impact other areas of the cube.

    Thanks YuliaKlimov, I can reproduce this issue, but I cannot explain the different behaviors between SSAS 2008 and 2008R2. As a workaround,
    could you try to use dynamic set or create statics set but with fixed member for example:
    CREATE 
    SET CURRENTCUBE.[Prior Month] AS
    [Date].[Date Key].&[20050723].PrevMember
    , DISPLAY_FOLDER = 'Relative Period Sets';
    Personally, I think your set is dynamic set, because the currentmember is changed base on current selection. You can also submit this issue
    on below official link to get confirmation from Product Group:
     https://connect.microsoft.com/SQLServer/
    Thanks,
    Raymond
    Raymond Li - MSFT

  • What is the difference btwn Variable Substitution and Dynami Configuration

    Hi Gurus
    Could you please explain the difference between the Variable Substituion and Dynamic Configuration.
    whn shall we use them and in what scenarios?
    thanx in advance

    Please go through this blog
    /people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name
    Also this
    /people/madanmohan.agrawal/blog/2009/05/20/combining-three-different-aspects-of-pi-asma-af-module-and-variable-substitution-in-one-shot
    Edited by: Baskar Gopal on Mar 31, 2011 9:04 AM

  • Image Sequence Settings in QT Pro - what is the Frame Rate range available?

    I am considering purchasing QT Pro for Windows. I wish to make a time lapse movie out of a series of pictures. I would like to know what the range of options is for the "Image Sequence Settings" in File->Open image Sequence... menu. Does is it go well beyond 1 second?
    Thanks!
    Chris

    Frames rates are from 10 seconds per frame up to 60 frames per second.
    I make many image sequence movies and just start with one frame per second.
    I then "add scaled" to a properly timed audio only file. This way you can get nearly any frame rate you could ever need.

  • What is the difference between dhcp 10.0 range to 192.168 range in airport extreme

    Having problems with the nat connection on my Xbox

    They're just different ranges of IP address (10.0.x.x and 192.168.x.x).

  • Skype versus facetime. what's the difference?

    trying to assess features between iphone 3 versus 4. Facetime sounds like it works inly w iphone 4. But couldn't you use skype on iphone 3 with same results?

    Something that is similar to Facetime but works over 3G and Edge is a App call Tango.
    I have used to place video calls and it worked ok ( in my case better than Skype),
    You do not need the app running in the background to to receive a call, so it will not drain your battery.
    if you want, It can work audio only like a normal phone.
    Have Video conference (not as good as Facetime but it was better than Skype).
    It supports cross platform (phones only)
    The only thing is that will not work in a Mac or PC computer, just phones.
    You can find it at the App store.

  • Copy versus Super Copy-what's the difference?

    Hello,
    Can someone explain what is the difference between "copy" and "super copy" functions in CUCM?  What additional parameters will the super copy replicate over what a "copy" will do?
    Thanks in advance,
    Adil

    Hi Adil,
    In addition to the good info from my friend Nadeem (+5)
    From the CUCM docs;
    •To copy an existing phone, locate the appropriate phone as described in "Finding a Phone" section, click the Copy button next to the phone that you want to copy, and continue with Step 5.
    •To  copy an existing phone and copy the directory numbers, speed dials,  busy lamp field/speed dials, and service URLs that are associated with  the phone, locate the appropriate phone as described in "Finding a Phone" section, click the Super Copy button next to the phone that you want to copy, and continue with Step 5.
    Note The lines that get copied become shared lines between the original phone and the new phone.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/7_0_1/ccmcfg/b06phone.html
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

  • What is the difference between the 45W MagSafe power adapters models A1374 versus MC747LL/A?

    Greetings:
    Can anyone tell me the difference between the MBA 45W MagSafe power adapters models A1374 and MC747LL/A? I cannot seem to find any specs using google and search on these forums.
    Thanks!
    matt
    Zoom
    Enlarge
    Sell one like this
    MacBook Air 45W MagSafe Power Adapter - MC747LL/A

    Two articles:
    http://support.apple.com/kb/HT2346
    http://support.apple.com/kb/HT1565
    Compare the images there, with the images where the model is shipped.

  • 1280x1080 versus 1920x1080.... what's the difference??

    If I export to HDCam tape as a 1280x1080 sequence, would it look any different than if I exported 1920x1080?
    When I export to tape at 1280, it fills the entire frame, just like 1920... aspect ratios are correct.. Im baffled.

    Is one anamorphic and the other not? Which deck? Any chance it is centering the footage and chopping the sides?
    Odd.
    CaptM

  • Exposure versus Brightness:  What's the Difference?

    What's the difference in what is controlled by Exposure and Brightness?
    (v. 1.4 if it makes a difference)

    The easiest explanation is if you know the Photoshop Levels dialog box. The LR Exposure setting is the rightmost of the three sliders that sets the white-point - any tones above it are pure white. The LR Brightness setting is the middle slider that affects the gamma i.e. the curve that boosts/lowers the midtones. Note that adjusting the brightness setting will never force any tones past the white-point and blow them out. The latter is purely controlled by the Exposure/white-point control.

  • Dynamic ALV with Static and Dynamic attributes

    Hi All,
    In my requirement we have some 5 static attributes and rest attributes needs needs to be dynamically created based upon the input selections. for eg my input for start date and end date is between 201023 to 201152 then weeks between this range should apear as dynamic columns.
    i am able to create a dummy alv table display with out populating data into it but unable to set the data to it . Kindly help me in solving this issue.
    Regards,
    Sana.

    You might have created a dynamic node, bind the data to this node and after that use the SET_DATA method of ALV interface controller to set the data by passing the dynamically created node.

  • The difference between "ipsec-isakmp dynamic" and "ipsec-isakmp profile" cyrpto map configs

    The IOS documentation for the crypto map command gives the syntax as
    crypto map [ipv6] map-name seq-num [ ipsec-isakmp [ dynamic dynamic-map-name | discover | profile profile-name ] ]
    I have a 881w ISR. In what different situations do we use the ipsec-isakmp dynamic form as opposed to the ipsec-isakmp profile form?
    I understand that ipsec-isakmp profile is applied directly to the vpdn-group. Does this substitute for applying the crypto map directing to the WAN interface? Why would I want to do that?

    Hello, thomasmcleod.
    The main difference between dynamic and profile in conditions to establish VPN connection. You can look at the difference if you compare EzVPN (dynamic profiles) technology with Lan-2-Lan (manual profile) technology.
    And why you should put crypto map to the interface. After puting this command to interface Cisco is starting to check traffic for encryption rules. In fact it can be any interface (not only WAN) when you want use encrypted VPN channel.
    Best Regards.

  • After Effects CS5.5 will not open a Dynamically Linked Premiere Pro sequence in the comp. window

    Hi all,
    I'm trying to export a Premiere Pro sequence which is in 2K and the footage has been shot as RED 5K. Adobe Media Encoder will simply not work as I am having the quite widely discussed issue where it will just 'hang' at certain points and not complete the export.
    The most popular solution to this problem is to export via the Render Queue in After Effects instead. However, therein lies the problem.
    I go onto After Effects. Choose File -> Dynamic Link -> Import Premiere Pro Sequence.
    The box pops up, I choose the Premiere Pro Project File then select the sequence I want to export. It then appears in the After Effects project panel window like so:
    However - when I try and drag this to a new composition window, one of two things have happened. Either A) nothing happens (literally, NOTHING changes) or B) as the following example shows, it seems to add it to a new composition, but the video is entirely black. I have tried rendering it and it just produces a black video.
    The other thing people seem to suggest is to just import the entire Premiere Pro sequence into After Effects. I've tried this, but any titles I have added in PP force the video to fade out then back in, in the place where the title should be?? So I can't export the video this way either.
    My system is as follows:
    Thanks massively in advance for any help that is provided!

    This is months old but I'm now having the same problem with AE and Premiere CS6 after updating last night: Dynamic linked sequence shows up in the project window in AE and even plays video if previewed, but will not drag or alt-drag into any comps, including a new comp (makes a new comp with matching settings, but empty).
    Furthermore, I do actually have an earlier version of the same sequence placed in one of my AE comps, which I think was done using the same steps just prior to updating the apps last night. Did this break?
    I'm a little concerned since the biggest reason I'm trying to use premiere is to eliminate the exports when adding graphics in AE.

  • What is the best approach to store "dynamic" user accessibility ?

    Hi all,
    We are implemennting security in our ADF BC + Faces application. There is always requirement to hide/disable functionalities that a user is not allowed / authorized to access.
    Usually we do this during development time, based on what role the user is in. Using this approach, there is no way to change that , or give access to new role during runtime (after the deployment). This is what I call "static accessibility".
    In our apps, we need the give / revoke access to some functionalities during runtime. This is what I call "dynamic accessibility".
    One approach that comes to my mind is :
    We define the accessibility to each function that we want to protect (hide/unhide) in database tables. Then every time a use enter a page, read these tables through JDBC calls then store tha data in Managed Bean.
    Has anybody here implement this "dynamic accessibility" ?
    Is there a better approach ?
    Thank you very much,
    xtanto

    Saeed,
    SRDemo uses a managed bean that checks is user in role when called and returns true or false. Another approach - more elegant - is the use of a security property resolver as available
    http://jsf-security.sourceforge.net
    Regarding dynamic permissions, the use of JAAS seems to be a good solution. ADF Security uses JAAS permissions to assign component access to users.
    E.g. if the user role manager has access to edit the salary column, then the security constraint added to the update button could be
    #{!bindings.<attribute binding>.updateable}
    Note that ADF Security sets the updateable flag on an attribute.
    Or you use
    #{bindings.<iterator binding>.permissionInfo.create}
    #{bindings.<attribute binding>.permissionInfo.update}
    #{bindings.permissionInfo['pageDefName'].view}
    etc. to determine what a user can do or can't.
    Note that I haven't tested if the permissions are cached for a specific application or if they are checked each time again. If they are checked each time then this would be a performance penalty but allows to dynamically set permissions to user groups as obviously needed in your applications.
    No, we don't have tutorial for this. But a Oracle By Example for end-to-end security implementation is on my collateral plan for JDeveloper 11 (just need to write a doc writer ;-) )
    Frank

  • How to import a dynamic excel sheet to a dynamic database table.

    I am not a developer, but am looking at what is possible in SQL server as I am planning an implementation strategy.
    My requirement is as follows:
    I receive an excel sheet and I do not know what are the columns or the number of columns in the sheet.
    I need to load this sheet data into a dynamic table in SQL server - named based on input excel sheet. The column names should get created from the header row. This should be achieved just by providing excel sheet name & location.
    Thanks

    Hi,
    Try with below links :
    http://micktechblog.blogspot.in/2011/06/ssis-excel-import-with-unknown-number.html
    http://munishbansal.wordpress.com/2009/06/09/dynamic-columns-mapping-%E2%80%93-script-component-as-destination-ssis/
    sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Maybe you are looking for