X1 2Gen Ethernet LAN dongle/adapter replacement

Need to replace the proprietary dongle that is shipped with X1 2Gen. I'm unable to find purchasing info for this part on the website, has anyone found where this can be purchased?
Lenovo Thinkpad
P/N: SC10A39882AA
FRU: 04x6435
Solved!
Go to Solution.

Hi cagman101, welcome to the forums,
try looking for the marketing part number aka option number 4X90E51405. 
http://lenovoquickpick.com/usa/accessory/4X90E51405/thinkpad-usb-30-ethernet-adapter
Andy  ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
  Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
PepperonI blog 

Similar Messages

  • Ethernet/LAN disabled

    I recently replaced my cable modem and now I only have wifi access. My ethernet/lan is no longer an option. Please see the attached screen shot and advise if there is a solution to correct this issue. Windows 8.1 64-bit. Model Pavilion 20-b010

    Hi, You are not going to have a cable modem option listed in Device Manager. Unplug the ethernet cable and reboot your PC and see if Windows rediscovers the internal Ethernet adapter. If you still can't see the Ethernet adapter in Device Manager then boot into the BIOS and check the security settings for the Network Controller. It should be set as shown in the below image.   If the above Network Controller is available and is set correctly then try running some diagnostics.  Tap ESC after power on then F2.  If the above suggestions fail to solve the issue then try resetting the CMOS back to factory settings. Review this manual.  The CMOS battery which needs to be removed for 30 seconds is in the battery compartment.  Once that process is complete then boot back into the BIOS and set the system clock.

  • Driver for my Integrated 10/100 BASE-T Ethernet LAN

     need drivers for integrated 10/100base-t ethernet lan driver win8 x 64bit i have the
    HP 15-d103tx Notebook PC
      here  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04206739&tmp_task=prodinfoCategory&cc=us&dlc=en...
     please help

    The Integrated 10/100 BASE-T Ethernet LAN is not the wireless network adapter.
    That is the wireless network adapter and has nothing to do with the wireless.
    If you need a driver for the wireless network adapter, then please do this...
    Go to the device manager and click on the Network Controller needing drivers.
    Then click on the Details tab at the top of the network controller window.
    Now you see a Property drop down list and it is defaulted to Device Description.
    Drop down on that and select the second item on the list (Hardware ID's).
    Post the top string of characters that begin with PCI\VEN.

  • Msi p4n sli - ethernet LAN connection not recognized after reinstall

    So I am reinstalling windows xp home edition after replacing a hard drive with over 1,000 bad sectors... The ethernet LAN worked just fine before reinstalling.  I don't have the original driver cd, so using another computer, i downloaded the latest nforce4 chipset / ethernet / IDE / SATA drivers from the msi downloads site.  Installed them and everything worked fine except that the network connection never showed up.  It is not to be found in the device manager, and I don't see it when I view hidden devices.  The LAN chip is enabled in the BIOS and it tried to netboot the first time i booted with the new hard drive (hadn't put the cd in the drive  ).   When that didn't work, I tried downloading the latest chipset drivers from nvidia's site, and the same thing happened.  No local area connection!
    Is there something I'm missing?  is there a utility I should be installing before I install the chipset drivers, etc?
    I'm feeling stressed as I need to get this finished and returned to my client today but I've been dealing with this since yesterday to no avail
    Any help is appreciated!  thank you!
    Jeff

    A little embarrassed that I didn't figure it out earlier, but I tried several things, realized I had turned off the LAN chip in the BIOS and forgot to turn it back on after installing the second time.   
    once i enabled it, I had to manually pick drivers for the "Other PCI Bridge Device", and then for the the nforce network controller windows found after that.
    Lesson learned: stress inhibits cognitive function. 

  • 14z-v000 LAN Network adapter missing

    Realtek LAN Network Adapter is missing and i'm unable to reinstall it. I tried to reinstall the Realtek LAN Driver but it keeps telling me "Realtek Network Controller was not found. If Deep Sleep Mode is enabled  Please Plug Cable."  Also the same message occurs when I try and reinstall the Realtek Network Controller Driver. I have attempted to restore to a previous time when I had the Ethernet Adapter and the LAN connection was working. Note that i do have access to the internet through the Wireless network adapter and wireless network but in device manager I'm completely missing the adapter for the Realtek LAN Connection. Even when I plug in a Ethernet cord into the computer through the port on the side, it still doesn't detect any sort of activity. Both the orange and white lights are always on even if unpluged.

    Hi ,  Welcome to the HP Forums!
     It is a terrific place to find answers and tips!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More  I understand that you have lost your network capability on your notebook and are unable to do a restore back to when it was working.  You are unable to install drivers for the LAN devices. Have you checked for viruses and malware?  MS Malicious Software Removal Tool Would you do this step, which will scan for corrupted files and try to repair them. Go to the command prompt  and run as administrator. Press Windows key +C to open charms.Type command prompt in the search bar.Right click and run as administrator.Type sfc /scannow and press enter.Once this completes restart your notebook and repeat this process once more. Now open Device Manager and show hidden devices, if the network adapters are not showing scan for hardware changes. Next you can try a HP PCs - Refresh Your PC to Resolve Problems (Windows 8).  This will reinstall the operating system and should not affect your personal files. If the network adapters are still not listed in the Device Manager, I would test the network adapter for a hardware failure. HP Notebook PCs - Testing for Hardware Failures (Windows 8).  Network should be listed under the component test in the UEFI which is the one you want to utilize. If for any reason that options is not available or the adapter is not recognized, if warranty is not a concern you can try reseating the network card. The next step would be to try a recovery back to factory.HP PCs - Performing an HP system recovery (Windows 8) During the recovery there is an option to backup your personal files to prevent data loss. If you have not already done a backup I suggest you do one now. HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8) You can contact HP support for assistance or repair options at any time.Please contact HP support at Contact HP Support If you are not in warranty and you determine a repair is necessary you may also consider a local repair shop.  To say thanks for replying please click the thumbs up icon below.If this resolved your difficulty please notify people by choosing solution provided.  Good Luck. 

  • Apple's Adapter Replacement Program

    Hello,
    Im having trouble with my charger works sometimes and sometimes does not. I saw this article about Apple's Adapter Replacement Program (http://support.apple.com/kb/TS4127).
    I have an L type charger and bought my MBP in 2010. Am I eligible for this replacement?
    Thanks

    It's pretty clear here:
    Resolution
    Whether your product is in or out of warranty, you can take your adapter to an Apple Authorized Service Provider or Apple Retail Store for evaluation and replacement if necessary. Pending the results of evaluation, you may or may not be eligible for a replacement adapter free of charge. Signs of accidental damage would negate any coverage. Be sure to bring in the computer used with the adapter; it is required to process potential adapter replacements.
    Apple Authorized Service Provider. Find one here.
    Apple Technical Support. Contact us for local service options.
    Apple Retail Store. Set up an appointment with a Genius.
    For information about the cash payment for replacement adapters referred to in the notice, go to www.AdapterSettlement.com or call 1-888-332-0277.  You will be provided with a detailed notice and claim form package that contains everything you need.

  • Ethernet LAN not working after upgrading to windows 8.1

    After upgrading from Windows 8 to 8.1, my Ethernet LAN is no longer working. Wireless LAN connectivity is OK. I have run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I do not see a 8.1 driver listed for the Ethernet LAN.

    You're very welcome. See if the recovery manager still works so you can roll back to W8. Please read this guide for how to use it. http://support.hp.com/us-en/document/c03489643 If it doesn't then you will have to order a set of recovery disks from HP, or you can install this plain W8 OEM software this guy has posted on a link. Lots of folks have used it successfully, which is why I posted it. https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1 Then use this tool to make the iso file bootable to a DVD or 4+ GB USB flash drive. http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool Yes, that really stinks why you and I could not upgrade without an issue. I disabled about 5 or 6 devices in the device manager and the code 12 would not go away. I have no clue why the PC works fine on W8 but not on W8.1. My notebook is a few years older than yours and it worked fine on W8.1 but not on W10. Go figure...

  • Apple's power adapter replacement program - U.S. only

    Hello,
    I have a macbook air.
    Its power adapter has a L-shape, but I have the same problem because of strain relief.
    I found that Apple's power adapter replacement program page on web, About Apple's Power Adapter Replacement Program -- U.S. only.
    I think that the T-shape photo on web is just an example showing what strain relief.
    When I visit the apple retail store and ask the program, they answered me that program is only available for T-shape power adapter.
    is it correct? do I need to buy additional power adapter for my air?
    Thank you,

    Yes, that is correct.

  • HT1515 Can I use AirPort Express product to add a wi fi outlet to my ethernet Lan?

    Can I use an Airport Express to add a wif fi outlet to my etehrnet (wired) Lan ... I don't have wi fi!

    This should work if you configure the AirPort Express to create a wireless network....the same type of setup that you would use for example, if the Express was connecting to the Ethernet jack in a hotel room.
    However, should work does not mean to imply that it will work.
    Here, I am assuming that the "main" router on the Ethernet LAN network has been configured to allow another router to connect to the network.

  • I have just bought a Humax PVR and Humax W-Lan dongle to connect to my Airport Extreme. I have put the mac address into the AE. The installation screen is picking up my network name no problem but it won't connect to the internet. Can anyone help please?

    I have just bought a Humax 7500T PVR and a Humax W-Lan dongle to connect to my Airport Extreme.
    I have put the mac address into the AE. The installation screen on my TV is picking up the network name but once appied it won't connect to the internet.
    I've a few other things connected to the AE such as computers, ipad, itouch, etc, and have never had a problem connecting these once I've entered the mac address into the AE. Can anyone help me with this please?

    have you made sure that the network setting in the system preferences is set up to use dhcp? if not i would try changing it so that it shows that it is getting its address by dhcp

  • Can I buy a usb dongle to replace my parallel port dongal

    Can I buy a usb dongle to replace my parallel port dongal for my Multisim 2001 product?

    Hello,
    Unfortunately those dongles are not available anymore.
    Regards,
    Fernando D.
    National Instruments

  • Can a Ethernet to Thunderbolt adapter fail?

    Have not been able to connect via ethernet to internet at multiple locations. I have exchanged the ethernet cables. I can connect with a USB to Thunderbolt adapter to internet. I can also connect wirelessly. The ethernet adapter seems to have stopped working.

    Can a Ethernet to Thunderbolt adapter fail?
    Yes.

  • Ethernet to USB Adapter Issues

    When using the ethernet to USB adapter on the Macbook Air I am getting a red 'not connected' followed by an amber 'searching for ip address' (something along those lines). It keeps flicking back and forth between those two statuses. Once in awhile it will sucessfully connect but it will soon kick itself off the network and start filcking between them again. I am a university student and the University IT team are saying there is nothing wrong with the network so it must be an issue with my leptop. One of the IT guys said there could be an issue with the adapter itself but considering its a few weeks old I fail to agree with this.
    Anyone have any idead?
    Thanks, PS I am connecting through DHCP

    Apple recommends to connect the USB Ethernet adapter before starting your Mac.
    Some other 'tricks' in here https://discussions.apple.com/thread/2624518?start=0&tstart=0
    Stefan

  • Unable to connect to LAN - Integrated 10/100BASE-T Ethernet LAN (RJ-45 connector)

    Unable to connect to LAN, downgraded laptop from Windows 8 to Windows 7 64-bit. Have tried using the HP device identifier, and installing all drivers under Network for the laptop on WIndows 7, though none of them showed as being for Local Area Network.I also tried following this thread: http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Integrated-10-100BASE-T-Ethernet-LAN-RJ-45-connector/td-p/4040756Downloaded the suggested drivers there for the HP Envy 17t-j100I also tested downloading the drivers here for Windows 7: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false Neither worked, I am still only able to connect via Wi-Fi, but not via LAN with actual cable attached.In case necessary, hardware ID for the Realtek PCIe FE Family Controller:
    PCI\VEN_10EC&DEV_8136&SUBSYS_1854103C&REV_05PCI\VEN_10EC&DEV_8136&SUBSYS_1854103CPCI\VEN_10EC&DEV_8136&CC_020000PCI\VEN_10EC&DEV_8136&CC_0200

    Hi: You can use all of the W7 x64 drivers and software from the HP 2000t-2a00 on your model except the BIOS and firmware files. Make sure you install the Intel chipset installation utility first and reboot before trying to install the Realtek LAN driver. http://h22207.www2.hp.com/us-en/drivers/selfservice/hp-2000-2a00-notebook-pc-series/5259212/model/5275371

  • Number of Ethernet Devices Supported on Ethernet/LAN port of Airport Express

    I am using an Airport Express to extend my wireless network (Apple Time Capsule Base) and using the ethernet/LAN port to connect a wired device (a DirecTV DECA) so that my DirecTV HD DVR box can connect to the internet thru my home network. Works great. I have Whole Home DVR installed and so the other DirecTV receivers in the house are connecting to one another over the the coax and using the (DECA - Ethernet over Coax) to talk to one another and they each recieve an IP address via DHCP from the Apple Time Capsule Base - obviously thru the brdige created by the AirPort Express. Recently added an additional DirecTV reciever and for some reason this one will not get an address? Is as if the Aiport Express has "maxed out" the number of ethernet devices it will connect or bridge on the LAN side? I have tried shutting everything down and bringing DirecTV recievers on in different orders and it is alwasy the last one (the 5th one) that fails to get an address. Anyone have any knowledge if there is indeed a limit of the number of ethernet devices that are supported on the Ethernet/LAN port of the Airport Express? Thanks for any insight.

    in theory, yes, but you work network admin may have locked the network preventing this from working

Maybe you are looking for

  • On Login to Workspace requested URL /pls/apex/f was not found Error

    Dear All, When I log into a workspace I get the following : The requested URL /pls/apex/f was not found on this server. Note: 1. The workspace was working fine and while working only this issue started and the problem exists since. 2. I am able to lo

  • Get selected function in a context menu with cl_gui_alv_grid

    Hi, I'm trying to implement a context menu on a alv grid. I defined and implemented a method for the event CONTEXT_MENU_REQUEST to add function codes to context menu.  It works ok. The problem is retrieving the function selected in context menu. I tr

  • IPhoto automatically imported EVENT and its photos?

    I imported some photos into iPhoto on my MacBook Air this weekend while away. This morning (I'm back home), I started the MacBook Air with the intent of copying the imported photos to my iMac and eventually into the iPhoto library. So the Air is runn

  • Strange Dump while using HR_INFOTYPE_OPERATION.

    Hi frnz, I am facing dump while using the FM 'HR_INFOTYPE_OPERATION' as below. <b>If I swap positions of w_p0041-endda and w_p0041-begda it does not give a dump but error msg is generated saying that no selection in the period(as obviously dates are

  • PDFs disappear from iBooks on iPad

    Recently, I installed video material on my iPad which brought it "0.01GB over capacity". I deleted one film to free some space. Soon thereafter, I received an "iTunes can't read the contents of my iPad" error in iTunes and I was unable to install any