X1 Carbon Fresh Rebuild with Win 8.1, 2 Devices are Unknown

Hello,
I wiped out my drive and rebuild my X1 carbon with Windows 8.1. I downloaded System Update in the hopes it would get all of my drivers that Windows did not detect. There are 2 devices that are unknown in device manager and System Update says there are no updates needed. Thoughts? Everything "seems" to be working. :-)

I think one of them might be the chipset driver. I am surprised that Windows Update didn't pick it up. Still checking. There was a newer system update on their website but that didn't detect them either.

Similar Messages

Installing a PCMCIA-GPIB with WIN-XP and I get an "Unknown Hardware Error"

no resource conflicts. Config settings for GPIB0 are slot#ffffffff 500 nsec bus timing. Card worked with win-me, and ver 1.2 of install s/w - help!

Hi Dave,
You should try using the lastest driver for the PCMCIA-GPIB interfaces. This is NI-488.2 2.1. You can find it in the Driver and Updates page.
DiegoF
National Instruments.

With new ios6 all my devices are linked message and email wise how do i seperate them?

I upgraded my iPad, and both my and my wife's phone today with the new iOS6.
Now we all are recieving eachothers messages and emails! I want all the devices seperate like they used to be in iOS5. Can I turn this linking off? I susspect it was in the initial setup after install that I linked all these devices.
Thanks

I had the same issue. With my son and my phones. We both updated to ios6 and were receiving each others text messages. We are on the same apple ID account. To correct this, I went into settings on my phone and disabled iMessage. Also, he was able to set up a separate iCloud account while still being under our shared apple ID account. This should prevent shared messages and shared contacts as well. Just a couple of ideas. Hope it helps.

Keynote issue: Why does my iPhone 5 not detect my iPad with Retina Display when both devices are up-to-date?

I have an iPhone 5. I am trying to pair it to my iPad with Retina Display. However, the devices do not detect each other when trying to pair over Keynote.
My apps and iOS are up-to-date. What is the problem? I have even tried wi-fi. I successfully paired the device to my iMac and it works.

This is for you and any other person that needs it. I didn't know how to use it properly.
Therefore, I guess it is operator error on my part.
You have to go into your Presentation tools and enable the remote from there.
Thank you for the link.

Sopund Blaster 5.1 VX Not working with Win 7

I have a SB 5. VX not working with Windows 7 , Please reply any comlete solution.

Re: Sopund Blaster 5. VX Not working with Win 7Not sure if you are using the driver available from the support site for Win 7 but if not, you can get it here.

Why i can't install itunes on my PC with win 7 pro 32 bit ?

dear apple.
Could you tell me how to install itunes 10 or 11 on my pc with win 7 pro 32 bit ?
when i try to installing itunes my PC has appear error so i can't complet install itune on my PC
Im trying many time but it just send me error and i cant finish installing itunes
So could you tell me how to fix that ?
Thanks
Jonny

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Satellite U200 with Win XP - Display device change utility is not working

Hi there,
I reckon there's nothing wrong with his installation since I experience the same problem.
Fresh install of win XP on a U200 satellite Pro.
WXP updated to sp3 straight away. Then downloaded all drivers baseD en serial number from toshiba website, then installed them in the same order as advised on the installation list but I get the same error installation message as sjoemie1 when I tried to install "hotkey for display device" etc.
ANYONE KNOW HOW TO REINSTALL THOSE TWO FILES?

Hi
The Common Modules v6.05.00 for Win XP needs to be installed firstly.
Furthermore there are two tools called
*Hotkey Utilities for Display Devices v3.4.4.1-XP*
and
*Display Device Change v2.3.0.0*
Both software part allows you to switch the display device from LCD to LCD+CRT or CRT mode by pressing Fn+F5
So if you have any problems installing the first utility, forget this and try the second one.

Fresh install of WIN XP on X201: Strategy: Which Drivers? In what order?

I am doing a fresh install of Windows XP SP3 (32 bits) from an Windows installation CD. As we know, after Windows CD completes the initial installation, a bunch of unknown devices shows up in Device Manager. So I need to install drivers for them. And I only want to install nessesary drivers and as little of additional ThinPad Software as possible.
So I go to ThinkPad Download Drivers & Software and there are WinXP drivers for my model (5143-28U). Some drivers are uniqe and are pretty obvoius to identify, for example, "Intel Chipset" or "Rapid Storage". But others are confusing, sometimes there 2 or even 3 similarly looking drivers. For example:
(1)ThinkPad 11b/g/n Wireless LAN Mini-PCI Express Adapter II for Windows XP, 10.95 MB, Ver:1.00.0029.8    released 14Sep2011.
(2)Intel Wireless LAN (11abgn, abg, bg) 242.48 MB   Ver:14.02.0000   released 08Sep2011
Which of the two to install? If both, then which is the first? ......????   ......??? Etc, etc, etc
Or another example:
(1) Bluetooth with Enhanced Data Rate Software II for Windows XP - ThinkPad.
(2) Bluetooth Support File for Bluetooth 2.1 with Enhanced Data Rate Software for Windows XP.
Which of the two to install? If both, then which is the first? ......????   ......??? Etc, etc, etc
By the way, after I have intalled one of the two Bluetooth drivers, my Windows craches during the startup up with BOD (Blue screen). What if anything should be done to properly install Bluetooth drivers?
Finally, is there a specific list of drivers only (and not just additional Lenovo software and Tools) to get rid of unknown devices with yellow question marks in Device Manager?
Thanks.
ThinkPad X201s (5143-28U)
i7-640LM(2.13GHz), 4GB RAM, 320GB 7200rpm HD, 12.1in 1440x900 LCD, Intel HD Graphics, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader

Hello rybshik,
pls check out this guide. http://forum.notebookreview.com/lenovo-ibm/333677-thinkpad-superguide.html
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community      Deutsche Community      Comunidad en Español

A88X-G45 with win 7 64 profesional no sound after driver instalation

Hello,
I replaced my dead "mb" with new "A88X-G45 gaming" and also instaled "win 7 64 pro" and have realtech driver problem.
On fresh windows instalation sound is working but when i install my drivers given on cd or downloadwd from MSI site my sound is not working.
One moment sound icon in system tray in normal next when i try to do something like try config sound device it sitches to disabled.
If I try to open some program using driver says : no audio devices are installed, when i click repair in troubleshoot sound problems it say it is fixed,
but in a few sec if you try to do anything sound is back to disabled. If u go in speaker properties it say the device you are configuring has been removed.
When i deinstall drivers i have sound but offcourse i want my drivers to work properly my config :
BIOS - E7900AMS V1.0
MBO - A88X-G45
CPU - A10 7850k
RAM - 2x4 gb patriot viper 2400 mhz PC3 19200
HDD - wd5000 velociraptor 500gb 10000 r/min
GPU - 2x atiRadeon HD 5770 1gb ram each
PSU - corsair 700 gs
OS - win 7 64 professional
I even reinstalled windows thinking maybe problem was there, so no updates, fresh windows, driver reinstalation, tried step by step instalation, downloaded driver from site nothing worked, so am also bezerked by this problem and like m8 sad this is not my first pc am putting together. Tryed diffrent version of win 7 like ultimate still same issue. Everithing else is working perfectly.
So please help us solve this problem so we can enjoy our products, thanks!

Hi just bought the same motherboard this weekend. I also have the same problem with the sound driver. anyway later I will try to update my windows to SP1 and see what happened.
BIOS - Updated to latest version
MBO - MSI A88X-G45
CPU - AMD A10 7850k
RAM - 2x4 gb Kingston Hyper X Genesis 1866
HDD - Samsung 840 EVO 250GB
GPU - MSI R9 270X Gaming 2GB
PSU - Cooler Master Silent Pro M2 850w
OS - win 7 64 Ultimate

Flash player does not work with Ie or Firefox with win 8.1?

Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......

Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

Problem with wine and Tony Hawk Pro Skater

Hi, I 've installed sucessfully Tony Hawk 4, but when i execute Start.exe:
[antonio@laptop ~]$ wine .wine/drive_c/Archivos\ de\ programa/Aspyr/Tony\ Hawks\ Pro\ Skater\ 4/Start.exe
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
my graphics card is Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller, and maybe should install a module for it works with wine.
The window where you start all options configuration appears to me, but when I go to Play THPS4! showed me the error. The version of my wine is wine-1.1.8. I don't know if I have to install any shape or form over any other option in winecfg.
thanks
Last edited by trancos83 (2008-11-10 20:19:44)

Can you try it on a desktop comp using arch and wine instead? Maybe it's a graphics problem? Anyway, I've checked the min req. and it's quite low..
Please check this site if your game is supported or if ever you want to play another game in the future.
http://appdb.winehq.org/

Problem with Wine, NVidia and fullscreen games

Hi,
I'm writing about a problem i recently noticed with wine, nvidia gpu and fullscreen 2d games.Basically the problem is as follows - i am running arch with the latest kernel and nvidia drivers on Thinkpad T61 with NVidia Quadro NVS 140M. I have a problem with old 2d games like Red Alert 2, Baldur's Gate, Icewind Dale, Diablo 2, Heroes 3. All of these games do not support the native 1440x900 resolution of my screen and all of them work fine in window mode but crash if fullscreen is selected. I managed to get some of them working by making them work at higher resolutions. For example although Red Alert 2 does not support 1440x900, it can be easily made to work at that resolution and after i applied the necessary settings it worked. The same was with Heroes 3 - by default it does not support 1440x900 and it used to work only i window mode but there is a HD mod which allows it to run in higher resolutions and after i applied it it worked perfectly in fullscreen. I haven't thested Baldur's Gate and Icewind Dale but i think it will work there too.
The problem is that i cannot use this approach to all games - for example i must run Diablo 2 and Starcraft in their original resolutions. I read somewhere that the problem is that wine can only change between the resolutions described in the xorg.conf file and if doesn't find the necessary resolution the game will crash or will only take the portion of the screen that is its resolution - for example when i play Starcraft rather than stretching it to the whole screen it simply takes 640x480 pixels of my screen and the game is displayed in the top left corner of the screen leaving everything else black.
I didn't have this problem before - it is something new though i'm not sure since when do i have the problem because i rarely play games. As for the idea that the problem may be related to the resolutions defined in the Xorg.conf file, my xorg.conf is automatically generated by the nvidia installer and there are no resolutions defined there.

brebs wrote:
Try nvidia 304.48
I remember that issue, with the 302 series.
I have Nvidia 304.48 installed and the problem still exists (it also happens with Catalyst). This didn't occur with 295.59 using the same version of Wine.
https://bbs.archlinux.org/viewtopic.php?id=55145
https://bbs.archlinux.org/viewtopic.php?id=147073

Help, web cam is not working properly with win vista

Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
lenovo easy capture 2.5...so if u cud suggest me anything...
Moderator note; subject edited

re-install drivers and try again. ( also easy capture )

Can't open camera RAW image in CS4/Bridge with Win 8.1. Worked fine with XP

I upgraded from Win XP to 8.1 and got a new computer in the process. I'm using CS4, and I think that works okay, except it does not recognize a RAW file. Bridge won't open thumbnails for RAW files, and if I try to open one it doesn't open it in Bridge; it goes straight to CS4 and that says it's 'not the right kind of document'. It doesn't matter if the file is on the hard drive or on a Canon card in a reader. Bridge will display thumbnails for JPG files and open them in CS4. It will not show the thumbnails for TIF files, but it will open them in CS4. How do I fix this?

I did all that, in the order you recommended. I downloaded, expanded and installed all three updates. I then checked the start page for CS4 and it is at 11.0.2. I also rebooted, but Bridge still won't display thumbnails of RAW files, will not open a RAW file in Bridge but sends it to CS4 which still says it is not the right kind of document. If I try to open a RAW file in CS4 directly, I do get thumbnails, but it won't open the file. On a more positive note, I called a friend who also has CS4 and who also recently bought a new computer. However, his is a laptop with Win 8 Professional. He had not tried to use Photoshop since he got the new laptop, and he discovered that he had the very same problem. However, downloading the updates fixed him right up. My new machine is a desktop with Win 8.1. What do I do now?

I use FF 20.0.1. How can I move my Favories and settings fron a laptop with Win 7 to a new laptop with Win 8. I can't find appdata on the Win 8 PC 8

I want to use Firefox on my Win 8 desktop. i want to move my favorites, settings and add-ons to a new Win8 laptop from my old Win 7 machine. I know how to do it with Win 7 machines by moving my profile. I can't find appdata on the Win 8 PC to move the profile to.
I will also want to do the same with Thunderbird.

The easiest way is to use Sync.
You can find it in Tools / Options.
You'll always have settins, bookmarks, saved passwords, history synced between you computers (and Android devices).

X1 Carbon Fresh Rebuild with Win 8.1, 2 Devices are Unknown

Similar Messages

Maybe you are looking for