X1 Carbon gets stuck at "Loading Windows" screen

About 90% of thetime I try to boot up my laptop, it gets stuck at the "Loading Windows" screen. I have waited for 10+ minutes and nothing. Other time, it will boot up fine, but that seems to be a rarity. I have tried the startup repair tool and even completely reformatted the hard drive and did a fresh install of Windows 7 64 bit and the problem persists.
Is this definitely a hardware problem or is it possible that it is somehow software related even though I reformatted and did a fresh install?

Hey...I just posted a solution to a similar problem. Try it for yours and post if it did the trick. I hope this helps!
https://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X1-Carbon-Touch-Having-trouble-starting-after...

Similar Messages

Cannot install Windows 7 Pro; gets stuck on "Starting Windows" screen

I have read dozens of posts on this topic but none has helped yet.
My system has Windows 8 with UEFI. I want to install Windows 7 Pro on another partition. I have turned off Secure Boot in the UEFI/BIOS. When I try to install Windows 7 Pro from a DVD it shows "windows is loading files" and then gets stuck on "Starting Windows"
for ever. This happens even when no USB peripherals are attached.
I have already wasted many days on this. I hope someone can help.
Thanks!

Hi friends of the internet
I have been reading several forums regarding the issue of installing windows 7 (64 bit) to a computer that have had windows 8 installed previously or just a GPT formatted disk.
My Case:
Windows version installed: Windows 7 Professional N with Service Pack 1 (x64) or Windows 7 Professional (x64)
Computer used: Samsung laptop
Model Code: NP53U4C-A02SE
See the specks here:
http://www.samsung.com/dk/consumer/computer-peripherals/notebook/notebook/NP535U4C-A02SE-spec
Create a USB install disk that not freezes at ”starting windows” screen:
First I followed this great guide (Thanks Daniel):
http://
hodgin.ca/2012/10/02/creating-a-uefibios-windows-7-usb-and-installing-to-gpt-partitions/
STOP AFTER STEP 13!
1. Open a command line in administrator mode
2. run DISKPART
3. type LIST DISK
4. Look for the disk number that represents your USB drive
5. type SELECT DISK # where # represents the number of your USB drive. Get this right or you will wipe a different drive out.
6. type CLEAN
7. type CREATE PARTITION PRIMARY
8. type SELECT PARTITION 1
9. type ACTIVE
10. type FORMAT fs=fat32 quick
11. type assign
12. The drive should now be formatted and marked as active and fat32. Do not format the drive as NTFS or you will only be able to boot into the installer in BIOS mode.
13. Now you will need to copy the contents of the windows 7 install dvd to the USB with a regular copy paste from windows explorer.
Here comes a very weird hack... I do not know why it works, but I think it is all about flash drive data structure. I did these steps on a win 7 prof. computer.
(Let’s assume it’s drive E:)
Make a copy of your e:\efi\microsoft folder to e.g. your desktop.
Delete the e:\efi folder
Copy the \efi folder from a windows 8 installation disk (I used Windows 8 (x64) Professional) to the e:\efi folder. Sorry I cannot provide this for you.
Here comes the weird part. Then delete e:\efi\microsoft you just copied from the win 8 installation disk.
Copy the \microsoft folder form the desktop to e:\efi\microsoft
Resume the guide from step 18.:
http://
hodgin.ca/2012/10/02/creating-a-uefibios-windows-7-usb-and-installing-to-gpt-partitions/
18. Insert the USB in the machine and turn it on and boot into the UEFI/BIOS loader and check for boot options. On the ASUS Zenbook it detected two boot options on the USB drive. One was UEFI and one was regular BIOS. I made the
UEFI option the first choice and restarted the machine.
My bios setup was:
Secure Boot = Disable
OS Mode Selection = CSM and UEFI OS
Boot Device Priority = I made the UEFI option the first choice and restarted the machine.
The installation should start normal.
E.g. See this guide:
www.sevenforums.com/tutorials/186875-uefi-unified-extensible-firmware-interface-install-windows-7-a.html
What I did was:
Select custom installation (Advanced).
Click Drive options (Advanced).
Delete all partitions (this might not be needed). When I did not delete all partitions I was asked every time after the install, during start up by the windows boot manager to select ether win 8 or win 7.
Click new (DO NOT make Changes in the size of the disk), apply, see NOTE!
Edit the Primary partition as you want it e.g. divide it to more partitions.
Select the one you will install windows on and do a normal install.
I do not make changes in the Bios after install. The Boot priority is automatic set to “Windows boot manager”. If I change the boot mode back to OS Mode Selection = UEFI OS, the computer will freeze at the “starting windows” screen again.
All this worked for me, good luck. There might be more to it, but this is a start.
By the way, the start up time for a MBT install was 37 s. And for the GPT it was 49 s.
Remember if we stand on each other’s shoulders we will reach higher
J.
NOTE: Here the installation program should create three partitions automatically!
Partition 1 - System - The EFI System partition that contains the NTLDR, HAL, Boot.txt, and other files that are needed to boot the system, such as drivers.
Partition 2 - MSR - The Microsoft Reserved (MSR) partition that reserves space on each disk drive for subsequent use by operating system software.
Partition 3 - Primary - Where Windows is to be installed to.
If this isn’t the cast you are not installing in UEIF mode. To check for this (thanks again Daniel):
If you need to find out if you have booted into BIOS mode or UEFI mode when the installer starts you can press SHIFT+F10 when the welcome installer shows up to open a cmd prompt. from here you will likely be at X:\Sources. Type cd .. to
go back a dir and move into \Windows\Panther\
Then type notepad setupact.log
Within this file do a ctrl+f and search for
Callback_BootEnvironmentDetect: Detected boot environment:
It should either say BIOS or UEFI.
To check if your disk is in the GPT format.
Open the command prompt.
Type: DISKPART
Type: List Disk
See for the star (*) in the GPT column

Satelite L750 (PSK2YA-04K010) constant long beeps when it gets to the loading Windows screen.

Hey all,
I have a customers laptop here, a Satelite L750 (PSK2YA-04K010). It's running Windows 7 Home Premium and when it gets to the Windows loading screen it beeps long constant beeps and the HDD led flashes in time with those beeps and doesn't actually load Windows.
Next time you reboot the computer it will often not beep and then boot fine.
Anyone know what this error beep relates to? I can't see anything in the manual or online that explains the error beeps.
Thanks.

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
- Peter

Stuck at "Starting Windows" screen

Starting Mac with Windows for the first time. How long does it usually take? I've been stuck at the "Starting Windows" screen for an hour. I realize its not too long since Im installing a new operating system, but just in case its supposed to take a lot less time I decided I'd post this. Thanks in advance

Hi,
Do you mean that you're unable to logon to Windows no matter via normal start or safe mode, and startup repair doesn't work with the disk?
For this error "gets stuck at 'Loaded: \Windows\system32\DRIVERS\avgidsha.sys' every time", hope this link can help you
http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=94159
I also suggest you try other advanced boot options such as Using Last Known Good Configuration, see this link
http://windows.microsoft.com/en-in/windows/using-last-known-good-configuration#1TC=windows-7
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Stuck at 'Starting Windows' screen! Help please :(

Hello guys and girls.
I have a problem with an Acer Aspire 8920 laptop.
To start off with the back light on the screen was the first issue. After turning the laptop on the screen would turn off. I would close the lid and open it again and the screen would light up as normal and then after a few seconds it would go off again.
I wasn't sire at first what it was so I plugged it into the telly via HDMI and that was fine. I looked closely and I could see very faintly windows had loaded fine. After that I knew it was the backlight.
Eventually after more research I bought a new inverter off the web. Few days later it arrived and I replaced it. It solved the issue but has caused a couple more.
I get stuck at the starting windows screen no matter what I do. I have a copy of W7 on a disc, on USB and if I try and load up W7 as normal. If I try and boot in safe mode it always gets stuck at 'Loaded: \Windows\system32\DRIVERS\avgidsha.sys' every time.
Also after replacing the inverter the brightness of the screen now 'pulses'. Thats the best way I can describe it. When it does pulse it doesn't go off completely, just a little brighter and darker.
I have looked online and found that people were getting stuck at the same place and the cause of that was a power supple issue with custom built PCs. I think that maybe I might have a the same problem because of this new inverter?
Any input would be great into this. I appreciate your help.
Thank you!

Hi,
Do you mean that you're unable to logon to Windows no matter via normal start or safe mode, and startup repair doesn't work with the disk?
For this error "gets stuck at 'Loaded: \Windows\system32\DRIVERS\avgidsha.sys' every time", hope this link can help you
http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=94159
I also suggest you try other advanced boot options such as Using Last Known Good Configuration, see this link
http://windows.microsoft.com/en-in/windows/using-last-known-good-configuration#1TC=windows-7
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Photoshop touch gets stuck on load screen on samsung grand, neo, core and most of the samsung phones

photoshop touch gets stuck on load screen on samsung grand, neo, core and most of the samsung phones

Hi,
which version are you using of the app?
Does it help to set the phone in flight mode?
Thanks,
Ignacio

My Mac won´t load. When I turn it on, I type the password, then it starts to load, but nothing happens. It gets stuck on the grey screen with the apple logo. I can´t go to an Apple store since I´m working in Bolivia. Thanks

When I turn it on, I type the password, then it starts to load, but nothing happens. It gets stuck on the grey screen with the apple logo. I can´t go to an Apple store since I´m working in Bolivia. Thanks

RhysWills1,
which model MacBook Pro do you have, and which version of OS X is installed on it?

IMac purchased at garage sale help. Gets stuck at "Login Window Starting."

Hi all,
I recently purchased an iMac at a barn sale, and it turns on and everything, but then gets stuck at "Login Window starting" screen (http://i605.photobucket.com/albums/tt135/gpd2paul4/IMG_0251.jpg). When Goggling this problem, I see that I am not alone in thee problem, but I am alone in the fact that I don't even know what model it is (I think G3, but not sure), let alone have the original CDs or paperwork. I have tried holding 'shift' right after the startup chime to start up in safe mode, but it still gets stuck at "Login Window starting." I have attached a few pictures of the computer to help you veteran Mac users identify it, which might help you help me. Any help is appreciated. (Step-by-step instructions are best, I am good at using a Mac, but this is getting pretty technical.)
Thanks!!!
Photos:
http://i605.photobucket.com/albums/tt135/gpd2paul4/IMG_0253.jpg
http://i605.photobucket.com/albums/tt135/gpd2paul4/IMG_0254.jpg
http://i605.photobucket.com/albums/tt135/gpd2paul4/IMG_0255.jpg

Try holding down the shift key when powering on. This will skip a few programs from loading.
Hold down the shift key when booting into Mac OS X. this will check your file structure and do a repair. This will also leave off some files from being used.
http://support.apple.com/kb/HT1455
"What is Safe Boot, Safe Mode? (Mac OS X) "
http://support.apple.com/kb/HT1564?viewlocale=en_US
Try holding down the option key when powering on. This will bring up the startup manager. Perhaps 9 is installed. Click on icon then click on right arrow.
This is an iMac g3 slot loader.
Your Mac won't start up in Mac OS X (Mac OS X 10.3.9 or earlier).
http://support.apple.com/kb/TS1411?viewlocale=en_US
Which iMac Is It? OK here are some more comparison charts:
http://lowendmac.com/macdan/05/0202.html
http://docs.info.apple.com/article.html?artnum=58669
You need to figure out the level of your firmware before installing 10.2 or greater. ( The PC name for firmware is BIOS. ) Installing 10.2 with a down level firmware will most likely make your iMac unusable and difficult to fix.
What is firmware?
The firmware software receives control when you poweron your machine. It does some hardware testing and some hardware configuration then passes control to your version of Mac OS. It reside on a PROM ( program read only memory ) chip on the logic board.
Open Firmware, boot into Open Firmware.
Power on your iMac while holding down commandoption+of
The first output line contains the firmware level. Mine reads:
Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
Copyright 1994-2001 Apple Computer Inc.
On my machine, I have 4.1.9f1.
What firmware do you need?
http://docs.info.apple.com/article.html?artnum=86117
For a slot loading iMac, this article indicates that you need to be running 9.1 or later version of Mac OS Classic.
http://docs.info.apple.com/article.html?artnum=75130
"The iMac Firmware Update 4.1.9 will only run on iMac computers with lot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD, or network disk) prior to following the update instructions."
You can download the Mac OS 9 updates from the Apple site.
http://support.apple.com/kb/HT1387?viewlocale=en_US
For tiger, you need 256meg of memory.
Mac OS X 10.4: System requirements
http://support.apple.com/kb/HT1514
There is no need to partition. You can save hard drive space by doing a custom install. Leave out the print drivers you do not need and the languages you do not need. Doing so you will need about three gigabytes of space.
You need to get into single use mode.
This page will tell you how to get into single user mode.
http://support.apple.com/kb/HT1492
Basically, you hold down the command-s key then powering on your machine. The command key has a little apple symbol on the lower left. It is between the alt/option key and the space bar
When you are in single user mode, you are in Unix. you can try looking in the log files to see if you can find anything.
To see the current boot log you use the dmsg command.
dmsg
startup information is in /var/log/system.log
to display the last 500 lines use the tail command.
tail -n 500 /var/log/system.log | more
For these commands you will need to gain write access to your startup disk. There are some comments at the end of the startup process that list the needed commands.
mac $ ls -lF ~/zztemp.txt
ls: /Users/mac/zztemp.txt: No such file or directory
mac $ tail -n 500 /var/log/system.log | cat > ~/zztemp.txt
mac $ nano ~/zztemp.txt
mac $
I assume the message contained /Library/Logs/CrashReporter. Do a change directory:
cd /Library/Logs/CrashReporter
mac $ pwd
/Library/Logs/CrashReporter
mac $ ls
???.crash.log VoiceCenter.crash.log
Exited process.crash.log
mac $ tail -n 400 \?\?\?.crash.log
Host Name: ???
Date/Time: 2008-09-15 14:28:37.577 -0400
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
Robert

Mac Mini 2011 boot camp freezes on loading windows screen.

I bought my mac mini 2011 server, have upgraded it to mountan lion and mountain lion server and wanted to install windows on it. I have microsoft windows 7 professional OEM system builder edition on a dvd, a LG portable super multi blue rewriter, a corded mac keyboard with number pad, a HP mouse, and a hdmi monitor. I have not upgraded any features on the mac, it is original.
I updated all software, well except a printer driver that I don't have the printer of anymore, and ran boot camp. I tried to partition my entire hard drive for it, however that did not work. I then tried to partition half of the first hard drive and that did not work either. I tried unpluging the mouse and keyboard and it still won't work. I bought the copy off of amazon and it appears to be legal. I just always get stuck on the "Windows is loading" screen. The loading bar, a white band across the bottom of the screen, always goes across the whole screen once fast, then makes it's way to the farther left side of the screen and then hangs there indefiniteley.
Any suggestions? more questions about the situation?

Mini mini, there are problems with mini and esp. server version.
What I think others have said: cannot use OS X Server, had to use Mac OS X client
External LG is not supported. Doesn't come with an internal SuperDrive though does it?
The system builder is fine.
Just one story (there are others, I need to collect all the "Mac Mini Tips" together, I can't remember and keep them straight otherwise.
HDMI audio in Windows 7 64 bit
reinstalled the Intel video drivers and audio worked immediately.
My config: 2011 Mac Mini 2.3, Intel 3000HD video
. . upgrade to 8GB ram
Samsung 8000 series LED TV connected with HDMI
Memorex external BluRay writer(USB only power)
After partitioning drive with boot camp and reboot, install Windows 7 with install wizard.
When asked whether to allow automatic updates say 'no', then complete installation and run boot camp tools for Windows.
Because the network driver gets installed prior to the Intel video driver, Windows will install the Windows Update Intel video driver which breaks HDMI audio.
When auto updates are off, the Intel video driver that is correct gets installed last.
HDMI audio works with this driver.
Apple should install the Intel video driver first and it would solve this problem.
I now have full blown 3D BluRay support on the MacMini with TruHD audio, fantastic!
https://discussions.apple.com/thread/3408749
- There are other stories where Microsoft Windows will automatically install video drivers (iMac) and cause trouble. Sometimes in an innocuous security patches rolled out monthly Tuesday.

Macbook getting stuck on the gray screen with the apple

Please help!
I had to turn off my computer this morning manually becuase it froze and when I went to turn it back on, it just gets stuck on the gray screen at the beginning. It will have the apple logo on it for a while and then switch to a "folder" with a questions mark in the middle, then to circle with a line through it and will never actually boot up. Please, any thoughts would be wonderful!

Do you have your install discs with you? If so, insert Install Disc 1 into the optical drive and boot the computer while holding the C key. The OS X Installer should load. Choose a language to proceed. Once that window is gone, menus should appear at the top of the screen. From the Utilities menu choose *Disk Utility*. In the left-hand column, highlight your hard drive's icon--the one that lists the xx.x GB capacity/manufacturer. If you have installed Windows via BootCamp, choose the *Macintosh HD* icon. Choose the *Repair Disk* button. If anything cannot be repaired, post the error here. If nothing needs to be repaired, click the *Repair Permissions* button. Also check the *S.M.A.R.T. status* of the drive in the lower-right corner.
Best of luck!
~Lyssa

Mac Pro gets stuck on the grey screen and won't finish booting

I have a Mac Pro 1, 1 recently (successfully) upgraded to snow leopard that gets stuck on the grey screen with the spinning rainbow cursor (after the apple logo and brief blue screen) and won't finish booting up. This happened after my computer froze up and I had to force quit. I checked out the forums and I tried all the all the suggestions (like disconnecting peripherals) and appropriate disk utilities, saw no errors with the HD reported, and had no trouble doing a safe boot (everything works o.k. there) or starting up from the software disk to perform the repairs. I did notice that during the repair permissions command, it gets stuck in the last few minutes, the CD starts to chug along, and everything freezes and I have to force quit. This happens every time I try it. I eventually backed everything up, erased the HD and reinstalled the OS, reset PRAM and NVRAM, but I'm still getting the grey screen on restart. Tech tool deluxe reports a "fail" on the video RAM, but everything else seems to check out. Could it be a graphics card issue? I did notice some funky visual glitches occurring prior to the breakdown. Any other ideas?

I wouldn't trust Apple Disk Utility to do a hard drive repair, but I would go with TechTool Pro 5/6 if you have that instead of Disk Warrior from Alsoft.
Clone the drive, though you should have some bootable backup clones already; repair the clone; then boot and work from that drive. Always have a working copy of the system.
And off load all your data to other drives.

My macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

my macbook won't start up, it gets stuck on the blue screen. can it be fixed? i suspect a hacking due to a strange phone call earlier which i thought was a scam.

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

My apple wont turn on. it gets stuck on the gray screen with the spinning wheel and the apple on the screen

My macbook air turns on but not completely, it gets stuck on the grays screen.   It shows an apple an a spinning wheel and that is as far as it gets. sometimes I can get to an screen that shows macintosh hd and i clicked on it and the computer turned off.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
     a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

App gets stuck on start-up screen at launch iPod Touch 5th Gen - full disk issue

Can't do anything. IPod touch 5th generation.
thoughts?
This is all that I can see...
A couple more notes... I have the latest version of iOS and 2.7GB of free space.
I have rebooted to release memory and it still gets stuck on the intro screen.
Are there any users out there who have this working on a 5th Gen iPod Touch?

Hi,
there are some users that have run into the same issue, we have not been able to reproduce this issue which means that we need your help.
If you could give us the crash logs that would help a lot, they are available at the following locations on your desktop once you've connected the device to it:
OSX: /Library/Logs/CrashReporter/MobileDevice/DeviceName/PSTouchphone....log
Windows: C:\Users\AppData\Roaming\Apple computer\Logs\CrashReporter\MobileDevice\DeviceName\PSTouchphone....log
The known workarounds are:
Uninstall and reinstall from iTunes with USB (normally works)
If that doesn't work the only known workaround is to upgrade your iOS version.
Did PS Touch always behave like this on your iPod? I.e. - when did you first install and start PS Touch?
If not can you recall how you installed PS Touch the first time?
Over iTunes or AppStore? And do you recall how you updated it?
thanks,
Ignacio

MOVED: HELP! After defrag I boot get stuck at XP logo screen!

This topic has been moved to Operating Systems.
HELP! After defrag I boot get stuck at XP logo screen!

i have some of your sypmtons for 2 days now... i have no idea what caused them...
i get the blue screen after rebooting, some apps don't launch or only launch after opening them 2 or 3 times. some apps crash that haven't crashed before... also i get the safe boot screen where one can enter unix commands, i enter "exit" there after loging in with my log and password... very strange...
i did the ram zapping thing described here on the forums, after no chenge i reinstalled the system from installer DVD and upgraded to 10.4.6 again, same thing happens again and again, sometimes i get the login window, sometimes i get the blue screen and only the mouse cursor and then i have to ctrl-apple-escape once or more to reboot...
i'm trying to repair permissions with disk utility, let's see if that helps....

X1 Carbon gets stuck at "Loading Windows" screen

Similar Messages

Maybe you are looking for