X1 Carbon Touch Screen stops responding after sleep

Hi,
My X1 Screen does not come back after sleep for several minutes. I've encountered this problem the very fist day I've received it, a reboot solved the problem but after few days it happened again, this time it took 2-3 hours for it to come back after several reboots. After a week it was gone for good, Service replaced the motherboard and just received my X1 back yesterday. Today it happened again. A reboot solved the problem but symptoms are same. Comp goes to sleep, when I try wake it up, X1 works but diplay is totaly gone. I can hear the sounds, see the fingerprint sensor etc is alive but can not wake up the display..
Model is 208A and Win 8.1
Any ideas ?
Thanks

Hey...got your back on this one! I returned a T440s because of this.....tech support had no idea...same problem for the replacement they sent to me, and again they it's a motherboard issue. Nope....trial and error...found the solution. Download and upgrade your fingerprint pro software and it's fixed. Here is the link. Please post if it worked for you too!
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS031504

Similar Messages

My iPad2 screen stops responding after about 5 mins, can this be fixed?

My iPad2 screen stops responding after about 5 mins, can this be fixed?

Have you tried to give it a reboot? Hold down the sleep and home keys for about 20 seconds. WHen you see the silver apple, let go and let it reboot and see if that helps.

My ipod touch 3 rd generation touch screen stop responding

I have a 3rd generation ipod touch. Suddenly after falling, the touch screen stop working. There is no damage to the screen nor the back or any part of the ipod but it never worked again as touch sensiivity. I reset the system, did the push to reset and when get the red slide bar to shut down its not responding because the screen does not work when touched.

When restoring to factory settings/new iPod fails to resolve a problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Yoga 13 touch screen stopped working after update KB3000850, please help!

Hi, my Yoga 13 touch screen has been working fine until yesterday. The laptop came with Windows 8, and last year I upgraded to Windows 8.1 without issue. Yesterday, I installed optional update KB3000850 from Windows Update, and immediately the touch screen stopped working. I have tried the following methods, all without success:
* Uninstall KB3000850 from Windows Update
* Use Windows Restore to restore to the point before yesterday
* Re-install Intel Chipset Driver from Lenovo official driver page
* In Device Manager, uncheck all the "allow system to turn off to save power" options for the USB input devices under Human Interface Devices then restart
* Two-button shutdown and restart
* Install Lenovo Driver Manager and let it check for new drivers
* Download Cando multi touch panel driver (Note: I could not install the driver because all I got was a .cab file which does not allow me to install)
As of now my touch screen is still not working. Computer Information page from Settings shows that there is no touch or pen device for my screen.
Can anybody help me with this? Thanks!

Very true, this has been a known problem since the first day Lenovo released the Yoga 13.
I need to send Lenovo a bill for my time spent rebooting. So far i am on my 8th reboot. In the past, around 5 reboots after winddows update would work. This time... who knows.
Of course it always happens when you have a deadline.
Please post back if you have found a better soultion than system restore.
Thanks for posting this issue. More users need to bring this to Lenovo's attention.

X1 Carbon Touch Gen2 (20A7005UMN) - touch screen stopped responding

Hi,
I have the Lenovo X1 Carbon Touch, new as of april 2014, and since last week, the touch screen has stopped responding to touch inputs. Before this it has been working and behaving perfectly.
I have tried to turn the laptop entirely off and on, reboots... No effect. The screen simply acts like it never was touch.
The HID driver is present and claims to be working. I tried to reinstall it and it does so with no errors or warnings. I also tried to reinstall the monitor and graphics card drivers. The Tablet control panel icon offers a calibrate option but Reset is disabled. The calibrate doesn't help because it doesn't respond to touch.
System says it has touch with 10 finger inputs.
Windows 8.1 Update 1, Enterprise SKU
Any advice is welcome.
UPDATE! Touch works when I lay the screen out flat. But if I return it to any angle, it stops working. Is this related to LayFlat mode or is there a connection fault in the display for touch input so only when I lay it flat it has contact?
Software or hardware?

I have kept checking on statements from Lenovo about the Thinkpad X1 Carbon for 7 months now, and I have not seen any indication of plans to change the keyboard. I have heard numerous complaints first hand about the keyboard, and the tens of reviews that I have read from around the world the last half year, there is doubt to outright irritation about the 2014 X1 Carbons keyboard and touchpad (the further specs of the 2014 X1 Carbon are of Rolls Royce impression, but because of the ruined keyboard and erroneous touchpad, we have decided not to consider the X1 Carbon further.
Observations:
Professionals want a large number of direct, true and tactile keys in traditional locations for efficient work. Lenovo has moved away from this fact by taking away keys, creating a touch strip while there is a touch screen already on it, and by changing the position of essential keys or removing them completely to be replaced by non-intuitive key combinations. The Red Dot award was truely earned for the weight and looks of the screen and case, but the keyboard is the weak link that makes the chain weak. Lenovo, Lenovo, Lenovo, what have you done?

Touch screen not responding after iOS 7.0.2 update

This morning I updated my iPhone 4s with the iOS 7.0.2. After the update I was prompted with the "Hello > slide to set up" screen, but when I tried to "slide it" nothing happened. I tried many times with my finger and a stylus, but still nothing. The screen eventually went black as it does when there is no activity. When I press the home button the "slide to set up" screen reappears. I tried holding the power button down, but couldn't "slide to power off". I restarted it by pressing the hold and home buttons at the same time, after the restart it went back to the "slide to set up" screen. The touch screen was working just fine up until the update. Please help me figure out what's wrong with my phone!

I'm sorry to hear about the issues that you've recently ran into with your device. I'll do everything I can to ensure you have a working device.
Do you have iTunes on your computer? Have you done a restore since the issue has been going on? http://support.apple.com/kb/HT1414
YosefT_VZW
Follow us on Twitter @VZWSupport

My HP Envy touch screen stopped working after getting an HP Bios update yesterday

Can someone please tell me how to fix my touch screen. I received an HP BIOS update which caused my touch screen to stop working. I've tried re-calibrating it but it won't accept my touch which tells me the screen is no longer enabled.
I tried finding where to enable and could not find where to enable finger touch. I've also tried looking for driver updates and the driver appears to be up to date.
Thanks
This question was solved.
View Solution.

I have a different type of TouchSmart, but this may work for you:
Press the Windows logo key + X (if using a Windows 8 computer -- if Windows 7, click the Start button, type Device Manager, and click Device Manager in the search results).
Select Device Manager from the list.
Click the little arrow next to Human Interface Devices to expand the list.
Click the touch screen driver (in my case, NextWindow Voltron Touch Screen).
Right-click, and select Enable from the list.
Click Yes if a dialog box asks if you are sure you want to enable the touch screen driver.
On some models, it isn't obvious which device in the list controls the touch screen. I have read in other posts that some people have fixed the problem by disabling and re-enabling each device.
If that does not work, you might try going to hp.com (http://www8.hp.com/us/en/support-drivers.html) and clicking Drivers & Downloads.
In the search field, enter your product name or number, and then click Go. Select your operating system from the drop-down list under Select your operating system, and then click Next. If there are any available graphics drivers under Select a download below, click the plus sign next to Driver - Graphics, and then click the driver name. In the Download options and information window, click Download . Follow the onscreen directions to download the driver. Restart the computer.
~Lil.Liebe
Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
Click Accept as Solution on a reply that solves your issue to help others in search of answers.

Touch screen not responding after water damage

Hello community.
I do get the fact that there is million of threads, but I want to know the opinion of others on this particular case.
I dropped my phone into the toilet (luckily, it was clear) and immediately got it out.
As I had no experience with these kind of accidents, I actually didn't turn off the phone. I used a towel and then I wobbled my phone to get rid of the water. Then, as the phone started rebooting itself, I dried it with a hairdryer (yes, I'm an idiot) and used a vacuum cleaner to help the proccess.
It kept saying this error [NAND] FileFlashAndMedia or something like that, so I turned it off for good and tried to restore it - I started getting the -1 error.
After several repetitions, iTunes finally started restoring my iPhone 5 and everything was back to normal. But then I came to the dreadful realization that the screen does not respond. Everything is ok - all the buttons, the display, even the sound seeems to be fine.
So after these 15 minutes of panicking I started to read articles and watch videos of other people. Put the phone in a bowl of rice, sealed it and I turn it on from times to times to find out if the screen started responding.
Any suggestions? Do you think there is a possibility to recover it?

mheijjer wrote:
This just happened to me!! Did it work? desperate to know if my phone will be salvageable!!
Your question has been answered in your other thread. No need to bump threads that are over a year and a half old. Odds are the OP is not monitoring this thread.

Aspire R7 572G touch screen stopped working after a windows 10 upgrade, pls help

I did a windows 10 update, but to my dismay I lost my touchscreen functions. I checked the properties on MY COMPUTER and it now says, pen and touch input not supported. Help pls

Hmmm.. I upgraded my R7 572G but my touch screen is ok. I'm not sure what you did. However, my problem was the screen does not auto-rotate in Windows 10. So I went to this folder to run as administrator to fix the auto rotate problem and it works. C:\OEM\Preload\FIXAUTOROTATE\EnableRotate.cmd

Touch Screen Not Responding after windows updates - Satellite U845t

From one day to the other, the touch screen of my Satellite U845t is completely unresponsive... anyone knows how to fix this? (I have restored the system to a point when I knew the touch screen was responsive, but no luck). Please some help!
Thanks!

Which update, Windows 8 to 8.1 or others?? more information and full model and or part number
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Z10 Touch screen not responding after OS update 10.3.1

Which subversion?

1. Done hard reset2. Done reset & update from blackberry link also Yet screen is not responding.Kindly help or advice how can i get update the earlier version of OS and how to do so

20" ACD touch buttons stop working after sleep mode

I have a new 20"ACD and have had nothing but problems with it. The new thing it is doing is if I leave the computer and it goes into sleep mode, when I awaken the computer, the side touch buttons no longer work. Also, when I go into preferences-displays, there is no longer an option menu which was just there a week ago....where did it go? Please help!
Dual 2GHz G5 Mac OS X (10.3.9)

I have a new 20"ACD and have had nothing but problems with it. The new thing it is doing is if I leave the computer and it goes into sleep mode, when I awaken the computer, the side touch buttons no longer work. Also, when I go into preferences-displays, there is no longer an option menu which was just there a week ago....where did it go? Please help!
Dual 2GHz G5 Mac OS X (10.3.9)

Sometimes my screen freeze after unlock my phone . sometimes after open an app the touch screen not respond to my touch...

help.... i've faced this problem since the windows phone 8.1 updates.... sometimes my screen freeze after unlock my phone . sometimes after open an app the touch screen not respond to my touch... i tried all the ways like turning off wifi etc and still
no recover my problem , and still screen freezing problems appear on windows phone 10 technical support..... just wish had to cure it... or i was depressing ....

Hello,
This is a developer forum and is intended only for discussions of Windows Phone APIs and app development.
For technical issues regarding usability, updates, or other Windows Phone usability problems you might want to try the Microsoft Mobile Community forums:
http://answers.microsoft.com/en-us/winphone/forum?tab=Threads
Thanks,
James
Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/

Why did my brand new Ipod 5g 32gb touch screen stop working?

So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?

If the reset does not work try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My ipad mini ios 6.1.3 touch screen not responding

after just a week of minor usage my brand new ipad mini touch sensor stopped working have updated it, resetted it, and restored it , it worked after the first restore then went back to the same condition restored it again and again but nothing what am i supposed to do with it now

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

X1 Carbon Touch Screen stops responding after sleep

Similar Messages

Maybe you are looking for