X1 Carbon Windows 8 Partition Layout - What is it all about ?

Hey,
Have a Windows 8 X1 Carbon and along with WWAN issues and a dud camera (screen got replaced entirely) I am now wondering about the partition layout.
I have a 240gb Intel SSD with this layout :
1000mb Recovery Partition
260mb Healthy (EFI System Partition)
200gb Windows 8 OS
14.25gb (Recovery Partition)
7gb (Oem partition)
My main query is the OEM Partition - no one seems to know what it's for - any ideas ?
DangerMouse
Current Machines : T420s/W530/X1CT

I have the smaller SSD but have nearly the exact same settings.
After a bunch of research we should not have to do, I found that the OEM Partition is used for Intel's Rapid Start/Storage Technology hibernation storage.
I have a buddy with a T430 running Win7 with Rapid Start and he has the same partition set up but in Win7 they list the partition as "Hibernation" type and ours is "OEM", likely because Lenovo creates this partition and defines it as OEM. It is the same size every SSD Ultrabook I checked.
All the recovery partitions can be removed if you off-load your recovery information to a USB drive using Lenovo's recovery disk utility. Wasted space in my view.
My problem or dislike about Rapid Storage and hibernation is the Red dot on the cover eludes that the computer is never hibernating. I am still not sure mine is because my battery drains when the lid is shut for long periods. The purpose of rapid start is it should write your config and completely shut off. I am convinced it is not doing that properly. I have all the BIOS settings correct and a 3 hour time to hibernate. 98% of computers that sleep have a light slowly blinking. When they hibernate, all lights are off. Not here.
I do have the biometric fingerprint scanner working. Was reading about some things related to that enabled. Chat about when going from the Sleep state to Hibernation, Rapid Start revives the computer from Sleep (with the lid shut) briefly and then invokes the Hibernation write function to its partition and then Win8 does its normal hibernate process. All happens fast but some were concerned the fingerprint security driver was forcing a wait state that Rapid Start could not answer.
I have had my carbon in Sleep, put in my soft sleeve and the next day found it warm and found it was on somehow. All very curious.
If I leave my carbon for three days and it is in true Sleep mode, the light does eventually go off but well after the 3 hour setting in the BIOS and the battery is almost always completely drained which is crazy (when I started with full charge). Wondering if the light only went off because Win8 or Lenovo power management goes into battery "stretch" survival mode and shuts it off.
Hope that helps and if you have had better luck with hibernation and sleep and battery please let everyone know!

Similar Messages

HT3669 HP 2.16.1 downloading "updating" 3 times in 1 day? What's this all about? I'm using latest OSX on MBPro

Hewlett Packard (HP) Printer Software Update ver. 2.16.1 has auto-installed/downloaded twice within the past few days and now, today, the App Store wants to download 2.16.1 HP Printer Software Update for a 3rd time!?! Same version all 3 times. What’s this all about? Is something acting up or is this normal? Really strange that it'd want 3 copies of 2.16.1....
Please advise what I should do.
I’m using latest Mavericks OSX (10.9.2) on Macbook Pro (mid-2012).
Thank you,
A
Below is a screenshot in case I made no sense explaining the problem above.

I don't know the cause and I haven't heard of that before, but
I think you should try some generic maintenence:
Startup from the Recovery Partition, and repair the hard drive and repair permissions with disk utility.
http://support.apple.com/kb/ht4718
(just read the first paragraph)

My itunes is playing up. every time I play a track or album I get a crackling interference noise. What's this all about and how can I stop it?

my itunes is playing up. Every time I play a track or album I get a crackling interference noise. It sometimes abates for a while but then comes right back again!What's this all about and how can I stop it?

See if this article will help:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362

HT201341 what is X11 all about? what is the benefit of having X11?

what is X11 all about and what is the benefit of having X11?

Welcome to Apple Support Communities
If you ask this, you will not probably need it. X11 is a version of the popular X Window System, used by most UNIX operating systems (including OS X). Since OS X Lion (I think), it is no longer included, and you only need it to run some specific applications.

What is terminal all about?

I have a q ,what is terminal all about? I think that for every possiible job, there are gui-applications,I mean really for everything.. can you tell me one usefull thing that requires the use of terminal? I mean what work can be done with it? I'm not talking about issuing several commands and see the network or processor workings, that's ok , but for what else can be used terminal? obviously it is not suitable for programming or text-editing.. what can be done better with terminal and terminal like programs, that can't be done with gui-applications? why on movies and such,computer gurus are always working in black screen and letters only environment?? what are they doing?
Message was edited by: rumencho

rumencho wrote:
obviously it is not suitable for programming or text-editing..
Really? That is the absolute best use for the Terminal. I always start programming from a Terminal window.
what can be done better with terminal and terminal like programs, that can't be done with gui-applications? why on movies and such,computer gurus are always working in black screen and letters only environment?? what are they doing?
That's just movies and, personally, I prefer a black-on-white traditional page background that is more common on Macs. Even if I'm working on Linux, another savvy programmer could probably tell I am a Mac person at heart just by looking at my terminal windows.
The easiest answer is that the Terminal, or, rather, command-line applications narrow your input to one path, the standard input, and your output to two paths, standard output and standard error. That is extraordinarily helpful because it reduces the problem space and allows you to focus. In fact, just having two output paths (one for regular output and one for errors, is actually quite a hassle).
Using these standard pipes, I can sting multiple programs together and have them work together to do very complicated things. In a GUI environment, you would need one GUI program that can do everything, which really doesn't exist. Plus, in the command line world, one data stream is the same as the next, no matter where it comes from. I can write a command line program that reads data from standard input and you can just type input into it. You could also send a file into it. You could also hook it up to a stream of network data. If you really want, you can even write a fancy GUI that sends data to it. The user on the other end will never know the difference.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3

Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton

My rue la la app for ipad suddenly dosent work so I deleted it now when I try to reinstall it the app store says that it not available in the us. It is still on my Iphone and working properly. What is this all about?

My rue la la app for ipad stopped working. I deleted the app and tried to reinstall it, it is no longer available in the app store and when I research it on safari and find it when i try to install it says that it is not available in the us store. What is that all about?

My app did the exact same thing. It is still unavailable on the App Store and when Rue La La's site directs you to download their app, the "not available in the U.S. message appears. This happened to me last night. The app wasn't working, I deleted it and was just going to reinstall but was unable to find the app. I figured it was some glitch but I have tried multiple times this afternoon to no avail.

When I start up FCPX, the timeline and the clips don't highlight in yellow. I have to double-click to get them to highlight and it's in white. What's this all about?

The system seems sluggish, as well. I can't find anything in help that describes what this is all about.

Are you using the Select tool when trying to click on clips? Might try hitting "A" on the keyboard just to be sure.
~D

Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?

Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?
Picture below, many thanks for your help.
Jason

Back up all data before proceeding.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
Start up in safe mode to rebuild the font caches. Restart as usual and test.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
If you still have problems, then from the Font Book menu bar, select
File ▹ Restore Standard Fonts...
You'll be prompted to confirm, and then to enter your administrator login password.
Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

Sync phone to computer and the process a significant amount of my contact list. All "A"s, all but 2 B's, all but 4 c's then left everything else as is. What's that all about and can I retrieve what was lost?

sync iphone to computer and in the process a significant amount of my contact list was deleted. All "A"s, all but 2 B's, all but 4 c's then left everything else as is. What's that all about and can I retrieve what was lost?

iTunes Store- Transferring purchases from iOS device or iPod to a computer
Downloading past purchases from the App Store, iBookstore, and iTunes Store
How to dowload purchased music

My Black Macbook froze using Safari. I forced quit and restarted. Before the chimes there was a single buzz, from below the keyboard. What's that all about?

My Black Macbook froze using Safari. I forced quit and restarted. Before the chime, there was a single buzz, from below the keyboard. What's that all about?

http://support.apple.com/kb/HT2341
Might be RAM related if the above tip describes what happened.
If not, and your data is not backed up, and it won't startup, read this tip:
https://discussions.apple.com/docs/DOC-1689

My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about?

My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about? Any ideas on how to resolve this.

Looks like the Sim card had a catastrophic failure. Burnout, short somethng like that.
You can try to take out the tray and reseat the sim card inside and see if that gets it back.
Also try resetting the phone at least once by holding down the home and power buttons until the Apple Logo shows up.
If none of this works you'll have to contact your cell carrier to get a new sim card, as it probably fried and is no longer functional.

I am unable to update my incoming mail since 9/21/12 What's that all about?

I can't update my new mail since 9/21/12 what's that all about?

That's all about you and your mail provider. It has nothing to do with Apple, and certainly nothing to do with the people in this user-to-user forum. And based on the information you have provided thus far unless there happens to be a psychic monitoring the forum no one can help you.

Confirming, indexing, creating peak file. What's this all about?

Althought I'm new to PrPro (see my very first post, it was the that I just started using this app), premiere already ate me that anywhere I go, when it comes to video editing, I am in its belly. But still I want an explanation regarding (again) about this message that's appearing in the status bar: 'conforming ?????.mpg". I don't really understand what's this all about. A little explanation is a lot to me. But what I am concerning about this thing is, it seems to be endless. PrPro had done already on all of my assets, conforming, creating peak files, indexing, but it still keeps on doing it again and again. Is there a problem with my audio/video files?
During the first time of my use, I didn't mind. I didn't even notice it. But now I started to be concerned with it since I my pc really slows down when PrPro starts this seemingly perpetual activity. If there's a problem somewhere else please help me.

Did you notice that you make the same mistake as one of our regulars here, the_wine_snob, otherwise known as Bill Hunt, in leaving out one 'a' in my last name? I'm not offended but wonder if that is a human trait to not overdo it and two 'a'-s may be too much?
I resemble that comment! Harm, you have to realize that I am from Mississippi, and everyone is known as Billy Bob, Joe Bob, or Bubba. We had no Harm Millaards - too many double vowels and consonants for us. At least this helped, when I signed up for a bunch of X-rated sites, as Harm Millard...
OK, where were we? LameTiger (check that spelling, as I think I got it wrong again and apologize profusely), when one has non-standard footage, three thing need to happen: the files need to be indexed, the Audio must be Conformed (CFA files) and the Waveform Display (PEK) files must be created. Depending on the number of files, their Duration and one's computer's speed this can take from moments, to maybe 20 mins.
If you have not just loaded up this Project, then gone for a cup of coffee, or tea, I urge you to do so. There is a tiny progress bar in the very lower-right of the GUI, that traces this. Let it happen, and be patient. I know that this sounds like a scene from the Karate Kid, but it's important. Many systems will crash, if one tried to do anything, before this process completes. I can work (albeit slowly), during the process. Many cannot.
Now, if you HAVE patiently waited this process out, and it has completed, AND the next session yields the exact same thing, then something is not quite right. Could be files getting moved, deleted, or otherwise not available to PrPro, or some setting in one's Scratch Disks, or some other problem.
Hope that a bit of patience, and a cup of Darjelling helps. Please let us know.
Good luck,
Hunt

HT5172 I have a new Mac pro.... when I plugged in PNY stick drive in the USB port a message came up that said that it was consuming two much power to remove the stick drive... what is this all about. ????

I have a new Mac pro.... when I plugged in PNY stick drive in the USB port a message came up that said that it was consuming two much power to remove the stick drive... what is this all about. ????

Try a SMC reset:
http://support.apple.com/kb/HT3964
Follow directions for a battery you should not remove yourself.

X1 Carbon Windows 8 Partition Layout - What is it all about ?

Similar Messages

Maybe you are looking for