X1 Track Pad issue when used with ultraslim powersupply

This is a really strange issue, Anyone else having it?
X1 I5 160Gb SSD 8Gb Ram Mix it with a Ultra slim PSU (41R4538) and the track pad starts playing up intermittently. Unplug the PSU and it works fine. Use the native PSU and it works fine. Do you think I have a faulty PSU ?
Best regards
Max

Well I got a replacment ultra slim power supply and I have exactly the same issue.

Similar Messages

SPA941 issues when used with Road Runner Extreme (Time Warner) 30mb/s down, 5 mb/s up.

I use a SPA941 phone in my home office.
Until recently, my Internet bandwidth was through Time Warner Road Runner Turbo. It generally worked well, but when I happened to be sending a large email or uploading a large file while on the phone, my voice would break up due to the upload bandwidth limitation.
Because of this, I upgraded to Road Runner Extreme (30mb/s download, 5mb/s upload). Now, although speedtest.net tests show that I have good bandwidth and latency, the mute button flashes red at various times througout the day, and at seemingly random times when I'm on the phone, the other party's voice will start to break up and/or cease completely, as though I have a download bandwidth problem... but a quick speedtest.net check shows that not to be the case.
I've spent hours (literally) on the phone with Time Warner 3rd level tech support, and they say everything is fine... and the issue must be with the phone.
I'm using a Ubee DOCSIS 3.0 WLCM combination modem/router
Connected to the SPA941 via cat5 10/100 Ethernet.
Has anyone encountered this problem?
Does anyone have any suggestions?
Are there any settings on the phone that can be adjusted to help in this situation?
Thanks,
David

Hi David,
After reviewing your post I see one important piece of information
"the mute button flashes red at various times througout the day"
Mute button flashing means the ethernet link went down. That would be between the phone and the device the ethernet cable is connected to. The SPA941 is 10mb half duplex device (no pc connection so it didn't need higher capacity).
It could be an auto negotiation issue with the network device. Try forcing the link to 10mb half duplex or daisy chain a 3rd party switch/hub and see if the problem goes away.
One more possibility is IP address DHCP lease renews itself causing the link to go down and up. You can also try setting static IP address with dns & gateway, etc.. into the SPA941.
Randy

Adf table columnStretching issue when using with in panel splitter

My Scenario is like this:
I have used adf table with columnStretching to last column of table. And the table is placed at second facet of panelSplitter. On load it covers full area of second facet which is pretty good. When try to collapse panelSplitter, arround 2 pixel of horizontal scrollbar appears at bottom. Even on uncollapse the panelSplitter to original orientation, the extra space remains there which makes horizontal scrollbar with 2 pixel gap for movement at bottom of table.
Is Anyone facing this kind of issue? And how can I solve the issue?
Thank you for your help and responses in advance. YOur help will be very much valuable to me.

Hi Frank,
I am using FF, Chrome and also IE in different compatibility mode. While wrapping with panelCollection it works fine. But the menu bar section and status bar is introduced on panelCollection which I cannot use in my work.
-Robin

Erratic track pad behaviour when connected with lcd tv thru hdmi

hello all..
i have a 3 week old mbp with lion preinstalled. i tried connecting my JVC LCD tv to it using HDMI. as soon as i get the projection of my desktop
on the tv, the trackpad starts its erratic behaviour. it just starts jumping around and sometimes randomly my mission control page comes.
but, as soon as i disconnect the hdmi, every thing comes back to normal..!! i tried smc reset and voila !! hdmi works perfectly...
this was yesterday... today i have the same probl all over again...i cant reset the smc every now and then to connect my tv thru hdmi ?
please help thanx

It's bluetooth interference from the monitor as described here:
http://support.apple.com/kb/HT1365
Regards,
Captfred

WVC200 Audio issues when used with Monitor software

I use a number of WVC cameras and when I view them through a browser, the audio works fine. When I use the Linksys "monitor" software, i have a continuous echo/noise problem. Is there a fix to this or am i limited to watching them one at a time through a browser??
Solved!
Go to Solution.

Hi.
These products are being handled by the Cisco Small Business Support Community.
*If my post answers your question, please mark it as "Accepted Solution".
*Don't forget to give "Kudos". Thanks!

InitializeQTML issue when used with ProRes encoded mov files

Hi,
I am using the QuickTime SDK to decode MOV files that are encoded using the ProRes codec.
Basically this is what i do:
- InitializeQTML
- EnterMovies
- Decode frames
- ExitMovies
- TerminateQTML
The first file that i am loading always works fine.
However, after i unload that first movie and repeat the same sequence with a second one, i am getting a memory exception in InitializeQTML.
I am unable to playback 2 movies in a row. Only 1 at a time. I have to exit my application and re-run it.
The QuickTime SDK and runtime have the latest version.
Any ideas why?
Message was edited by: msbox

I have more details.
If i comment only the MovieTask() function inside my routine, it stops crashing. But of course, i cannot have my frames rendered.
By the way, all this sequence is called inside the same thread.
Any pointers will be greatly appreciated.

Why can't I zoom in on text with my track-pad like I can with other browsers? I have a MacBook Pro. I used to be able to pinch and expand pages but now I can't.

Why can't I zoom in on text with my track-pad like I can with other browsers? I have a MacBook Pro. I used to be able to pinch and expand pages but now I can't. I have bad eye-sight and really enjoy and NEED this feature to be able to read most sites.

Hi dwightfontenot-
Some gestures have been removed in Firefox 4 and later.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.
Use the Filter bar at to top of the about:config page to locate a preference more easily.
Preferences that have been modified show as bold(user set).
Preferences can be reset to the default or changed via the right-click context menu.

New Track Pad Issues After 10.6.4 Update

I understand that the Mac OS X 10.6.4 was meant to address some track pad issues. I was not experiencing any track pad issue on my Late 2009 MacBook Pro prior to the update. However now my laptop is almost unusable!
The pointer tracking remains accurate on all areas of the track pad, however most clicks are not recognized, requiring an average of 3-5 clicks to initiate an response. Also the bottom half of the track pad surface now seems less responsive to input than the top half. Multitouch gestures like selecting and dragging often lose track of my fingers before I've completed the action. Scrolling still seems to work fine.
Again, I've had this MacBook Pro for 9 months now and prior to the 10.6.4 update the track pad was highly responsive and accurate regardless of how I placed my fingers. Please look into this matter immediately! Thank you.

Exact same problem here. I hadn't notice what you write about the bottom half of the trackpad being less sensitive than the upper one, but now that you said it, I think the same thing it's going on with mine.
I think my problems didn't appear right after I installed 10.6.4, or at least I didn't notice until 2 or 3 days ago. Maybe it worths the try to make a downgrade to 10.6 and check if the problem stop. Let's hope that someone came with the answer to this things, I really hate to use the 'tap to clic' function.

JTable text alignment issues when using JPanel as custom TableCellRenderer

Hi there,
I'm having some difficulty with text alignment/border issues when using a custom TableCellRenderer. I'm using a JPanel with GroupLayout (although I've also tried others like FlowLayout), and I can't seem to get label text within the JPanel to align properly with the other cells in the table. The text inside my 'panel' cell is shifted downward. If I use the code from the DefaultTableCellRenderer to set the border when the cell receives focus, the problem gets worse as the text shifts when the new border is applied to the panel upon cell selection. Here's an SSCCE to demonstrate:
import java.awt.Color;
import java.awt.Component;
import java.awt.EventQueue;
import javax.swing.GroupLayout;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.border.Border;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
import sun.swing.DefaultLookup;
public class TableCellPanelTest extends JFrame {
private class PanelRenderer extends JPanel implements TableCellRenderer {
    private JLabel label = new JLabel();
    public PanelRenderer() {
      GroupLayout layout = new GroupLayout(this);
      layout.setHorizontalGroup(layout.createParallelGroup().addComponent(label));
      layout.setVerticalGroup(layout.createParallelGroup().addComponent(label));
      setLayout(layout);
    public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
      if (isSelected) {
        setBackground(table.getSelectionBackground());
      } else {
        setBackground(table.getBackground());
      // Border section taken from DefaultTableCellRenderer
      if (hasFocus) {
        Border border = null;
        if (isSelected) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusSelectedCellHighlightBorder");
        if (border == null) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusCellHighlightBorder");
        setBorder(border);
        if (!isSelected && table.isCellEditable(row, column)) {
          Color col;
          col = DefaultLookup.getColor(this, ui, "Table.focusCellForeground");
          if (col != null) {
            super.setForeground(col);
          col = DefaultLookup.getColor(this, ui, "Table.focusCellBackground");
          if (col != null) {
            super.setBackground(col);
      } else {
        setBorder(null /*getNoFocusBorder()*/);
      // Set up our label
      label.setText(value.toString());
      label.setFont(table.getFont());
      return this;
public TableCellPanelTest() {
    JTable table = new JTable(new Integer[][]{{1, 2, 3}, {4, 5, 6}}, new String[]{"A", "B", "C"});
    // set up a custom renderer on the first column
    TableColumn firstColumn = table.getColumnModel().getColumn(0);
    firstColumn.setCellRenderer(new PanelRenderer());
    getContentPane().add(table);
    pack();
public static void main(String[] args) {
    EventQueue.invokeLater(new Runnable() {
      public void run() {
        new TableCellPanelTest().setVisible(true);
}There are basically two problems:
1) When first run, the text in the custom renderer column is shifted downward slightly.
2) Once a cell in the column is selected, it shifts down even farther.
I'd really appreciate any help in figuring out what's up!
Thanks!

1) LayoutManagers need to take the border into account so the label is placed at (1,1) while labels just start at (0,0) of the cell rect. Also the layout manager tend not to shrink component below their minimum size. Setting the labels minimum size to (0,0) seems to get the same effect in your example. Doing the same for maximum size helps if you set the row height for the JTable larger. Easier might be to use BorderLayout which ignores min/max for center (and min/max height for west/east, etc).
2) DefaultTableCellRenderer uses a 1px border if the UI no focus border is null, you don't.
3) Include a setDefaultCloseOperation is a SSCCE please. I think I've got a hunderd test programs running now :P.

HT3964 noisey dvd drive when using with macbook pro retina?

I bought a new macbook pro retina 15" and used the apple external dvd drive to watch a movie and the drive was extremely loud and vibratory - to thr point of nearly not able to hear the movie. I then tried the same drive with the the same dvd with a macbook air and it did not have this issue. Anyone know how to solve the sound issue when using the dvd drive with a macbook pro retina 15"? Thank you.

Thank you - it is the DVD driver I purchased over a year ago with a Mac book air - I wondered whether they have since updated the DVD driver and therefore wondered about compatibility. I also wondered whether it had to do with the fact that I was on battery power when this happened any further thoughts appreciated.

Test runner freezing when used with Dynamics CRM (and other apps) - Both applications freeze and never come back...

We are trying to use test runner with dynamics CRM.
MS Dynamics CRM will freeze and will not respond (even after 10 - 15 minutes). When this happens, the test manager will either freeze or a message will apear saying "waiting for application under test".
We are not recording action recordings...This makes using test manager impossible. It happens consistently, starting with slowing the PC down (mouse moving slowly, slow to load in new screens, drop downs etc) eventually leading to the app freezing.
Tried on windows xp, windows 7 etc on various specs of pcs.

I am experiencing this same issue with
Test runner freezing when used with Dynamics CRM. I notice this was first posted in June of 2010 and so far no
resolution? I was wondering if it could be related to memory issues? Do you have any troubleshooting ideas? The
issue for me seems to be sporadic and I can't
reproduce it every time.
The message I get is "waiting on application under test".
DLM

Camera is hanging when using with flash

Hi Lenovo Team,
In lenovo vibe x2, camera is hanging when using with flash.Getting "Lenovo snapit isnt responding" error and screen hanged for sometime.after that when tried to open camera "Cannt cannot to camera " error is coming till when restart the phone.
Even tried Factory reset and software update.
Please provide the solution for the above issue.
Thanks,

Hi vijayprabhu,
I just tested the X2 however am not having the issue. I set flash to always on then took a picture using SnapIt however its fine.
Please check if you have the latest firmware S125.
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Bluetooth issues when using smartwatch on the z1s

I'm having some Bluetooth issues when using my smartwatch. I usually use my z1s with my car radio via Bluetooth to listen to music and for making calls. Now that I got a sony smartwatch I always got problems with the calls. It looks like that the Bluetooth turns off during the call when I'm using the smartwatch. I already tried by deleting and pairing again the z1s, but nothing works. Not sure if maybe the z1s does not support the smartwatch and the care radio Bluetooth connection at the same time. However it works fine when playing music! The problem is just with the calls. This never happens before I got the smartwatch.

I have the Tmobile Z1s and a SW2 and have the same issues with multiple devices:
1) Bose Soundlink Mini
2) Sony MBR-100
3) My car's bluetooth
4) Ford Sync
5) Sony SBH20
6) Motorola S305
If the phone connects to the A2DB device, it will typically play fine for several minutes. Then, audio will drop out. If I do nothing, after several minutes my watch will vibrate to show it has disconnected. Sometimes audio then comes back, and sometimes it doesn't.
Sometimes my phone will not connect to my car. Then, if I can get it to connect, it will only allow for phone audio, not media audio.
This issue has been on (2) Z1s's with the SW2. The first I returned due to touch screen issues, which the second one also has. All of the devices above worked perfectly fine with my Xperia Z, Galaxy S2, HTC One, etc. The Xperia Z and the SW2 never had any problems.
Honestly, this phone has been incredibly frustrating. If the upcoming updates for either the SW2 or Z1S don't fix this issue, I'm going to return it and get something else.

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

Does resteasy API have class loader issues when using via OSGi

Does resteasy API have class loader issues when using via OSGi

Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum.

X1 Track Pad issue when used with ultraslim powersuppl​y

Similar Messages

Maybe you are looking for

X1 Track Pad issue when used with ultraslim powersupply