X10 not connecting to mobile data networks after upgrade to Android 2.3

My X10 does not connect to GPRS / EDGE / 3G / HSDPA after the upgrade to 2.3. Wifi is no problem, though.
I used the SIM card in another X10 with Android 2.1, no problem, got an HSDPA connection. And yes, all the boxes are checked: "Data Enabled" and "Data Roaming";
I had problems before the upgrade to connect to data networks when roaming, but never in my home network. Now, it doesn't seem to work at all.
Any advice?

go to settings -> sony ericsson -> data download
or
settings -> wireless & networks -> mobile networks -> access point names -> MENU -> add New -> enter the APN info -> MENU -> Save
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2?  My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old.

    Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2?  My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now.  I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
    I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
    Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service".  My iPhone 5 works perfectly on iOS 8.1.2, on Cellular.  I've browsed the blogs and have tried Apple's suggested fix, all to no result. 
    Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
    I've filed a report with Apple, along with a request that they contact me, but no results yet.
    Help? (and thank you).

    Hello razmee209.  Thank you for your response.  I spent the better part of yesterday working with Apple Support.  They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total.  Same problem.  I restored from the cloud to recover my apps, same problem.
    AT&T installed a new sim card - same problem.  I spent time with AT&T Support yesterday, too.  In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
    I didn't have this issue before I upgraded to iOS 8.1.2.
    Everything else with the iPad works fine:  WIFI, Personal Hotspot, email, all my apps, etc.
    In browsing the web for this issue I see that many other folks have the same problem.  I filed a report with Apple this morning, requesting that they contact me, but no word yet.  I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
    At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
    Thanks again for your response and suggestions.

  • Why do i have to restart my iphone 4 to connect to cellular data network after moving out of wifi range?

    Whenever I move out of a wifi zone, I expect my iphone to connect to cellular data automatically. But this doesn't happen. I have tried turning flight mode on/off and also tried turning cellular data on / off couple of times, but nothing works.
    I only get the cellular data connection back after I restart my iphone.
    I started having this problem after upgrading to iOS7.
    Any idea how to fix this?

    Hi beingkejo,
    Thanks for visiting Apple Support Communities.
    Toggling Airplane mode and cellular data are good troubleshooting steps. If your iPhone still does not connect to cellular data automatically when Wi-Fi disconnects, I recommend the additional steps in this article:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    All the best,
    Jeremy

  • TS4006 can this find my iPhone app work if you are not connected to cellular data network and wifi

    can this app work without cellular data network and wifi, if yes then how exactly this work ?

    To use Find my iPhone you have to set it up on your iOS device before you lose it. Your device also needs to have iOS 5, be switched on and connected to wi-fi/3G.

  • Airport will not connect to my home network after trying to connect to my school's network. Need help!

    Airport on my Macbook will no longer connect to my internet network at home. I was on campus using my university's network today and now Airport only wants to connect to it and will not change back to my home network. It has something to do with the 802.1X, and I don't know enough about networks to know what that does. Is there someway I can just reset my entire airport settings to where it would be like the first time I used my Macbook and configured it to my home network?

    Is there someway I can just reset my entire airport settings to where it would be like the first time I used my Macbook and configured it to my home network?
    Did you Shut Down the Mac and then power it back up?  Can you connect to your home network now if you click the fan shaped AirPort icon at the top of the Mac's screen? 
    If your home network name does not appear, click Join Other Network, then click Show Networks.
    Click the name of the network that you want to join and enter the password if required
    Are you saying that you want to delete the connection to the school network from your Mac?  If you do this, you will have to setup the connection again if you head back to the school.

  • My iPad2(Wifi-16Gb) unable to connect to home wifi network after upgraded to iOS6. The said network is a remembered network and never face this connection issue before iOS6.

    Forget and reconnect the netwrok doean't solve the problem.
    Even Network Reset recommended in others iPad user in the forum can't help as well.
    Please advice. Thanks.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Not connecting to the same network after sleep

    I'm working on a MacBook that is running Mac OS X (10.5.8) for a friend. It has all the specs that should be running circles around my MacBook running Mac OS X (10.6.2) which is five years old. However the hard drive had to be replaced on my computer and I updated the OS.
    The MacBook (10.5.8) has an issue with connecting to the network here in the house. Last night we ran all the updates so that it would be current. Yet there was still a problem with the network connection. When the computer is awake and we log into the network it's fine, but when it goes to sleep and is woke up again it joins the network next door. Where my computer stays on the house network and doesn't jump networks. The pc computers in the house stay on the network here in the house as well and don't jump networks.
    Does anyone know how to fix this problem? I was reading on the different discussion boards and none of them really match what is going on with this computer. There is also an airport client update, but I don't know how to find out if the Macbook is a late 2007, early 2008, late 2008 model and I fear that if I download this update client not knowing the model I will mess something up.
    Does anyone have any advice?

    Stiletto85 wrote:
    When the computer is awake and we log into the network it's fine, but when it goes to sleep and is woke up again it joins the network next door. Where my computer stays on the house network and doesn't jump networks.
    This thread http://discussions.apple.com/thread.jspa?messageID=10738462 may offer you some useful advice.

  • ITunes not connecting to AirTunes remote speakers after upgrade to 7.6.1

    Hi
    I've just noticed that iTunes is refusing to connect to my AirPort Express. Or rather, it's ignoring me when I ask it to connect; it's as if I didn't select the remote speakers at all. It is displaying them in the remote speakers menu, and allowing me even to bring up the "multiple speakers" option, but won't respond to me selecting them). It's only started doing this since the update to 7.6.1.
    The problem is not with the AirPort unit; my partner's MacBook running 10.5.2 and iTunes 7.6 will connect to it happily (thankfully she hasn't updated to 7.6.1 yet).
    Any suggestions? Has anyone else experienced this? Or is this simply a bug I need to report to the good people at Apple?
    Thanks in advance.

    Not working here either on v7.6.1.
    Doesn't always find Airtunes speakers, works for a bit, then playback hangs at 0:00.
    Quitting and restarting iTunes seems to get it (temporarily) working again.
    Also, the iTunes volume control is broken - it plays at 100% volume regardless of volume setting and regardless of whether the "Disable iTunes volume control for remote speakers" option is checked.
    All in all, a very poor release.

  • Could not activate mobile data network - iPhone 3GS

    Hi, I really need some help please.
    Last week I started to get this message everytime I tried to use internet services, email, web or apps. I was on 4.1.2 and the phone was officially unlocked and running a T-Mobile sim with auto-update carrier file installed.
    I reset the phone, restored it and never worked, subsequently, I have done this many times, reset network settings, hard reset, soft reset and I eventually upgraded to 4.2.1. This still never solved the issue.
    After countless restores and resets and iTunes updating the carrier files, nothing is working. I contacted T-Mobile who said there are no connectivity issues, must be the handset. I then contacted Apple who advised the handset is out of warranty and an 'out of warranty' repair will cost minimum £146.
    The phone works fine calling, messages and on Wi-Fi it's only internet services that do not work. Is there anything else I can try or has anybody experienced the same problems?

    Thanks for the advice. That was one thing I hadn't tried purely becuase it is such a pain in the ***. I reset the phone and set it up as a new one and bingo, it worked fine. I then went to restor from backup, after which, same issue, Could not activate mobile data network, so another reset and now I'm pretty furious that all my phone contacts, apps and messages have all gone.
    Next question would be how to transfer phone contacts from phone to sim. I have lost all new numbers that have gone into the phone for the last year, so if I reset again, restore from backup, transfer numbers to sim, then reset again and set up as new phone I should be able to recover numbers at least.
    <Edited by Host>

  • S860 and X2, Google not connecting on mobile network.

    I live in Sweden. Had my S860 for 3 years and it has been working fine but some months ago it was not connecting on mobile network with crome and play store. Restart and it could work for some time the it was gone again. At the same time Hotspot, skype and OS update is working fine. Got a new sim card i november but it did not help. This was going more and more bad and finally it did not work at all. Tried to reverse OS a few steps back and still not working. So i tought that it was something to do with hardware. Now i bought a Vibe X2. Away from sweden for the moment (Saudi Arabia) but this one does the same when I try to connect. OS update working but Crome says ssl error and Play Store just wont connect. Saw some forums said it might be time and date that was wrong so i tried to change to local format but it was the same. My S860 i was waiting for 6 month before i could buy it (not for sale in Sweden) in Saudi. Haas been very pleased with it so now when it has been messing with me i had no problem to buy a new Lenovo phone. This time just waiting 3 month before i could buy it in Saudi. Hope this is something I can get some help to solve. /Nils

    Hi Ragge
    Can you tell me your firmware build number(for the S820 and Vibe x2) and Baseband version(for the S820)?Settings->About phone....
    ''Had my S860 for 3 years and it has been working fine.....Sorry, checked and it is a S820 i have.''
    The S820 has been relesed in May 2013.
    ''Tried to reverse OS a few steps back...''
    How did you do that?.
    Can you install THIS ->Open the app->MTK Settings->Telephony/BandMode->SIM 1(Do the same for SIM2) and make a screenshot(Power&Volume-) ->post the screenshot here.Thanks
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I bought an unlocked 3G and when I try to use the internet, it says 'Could not activate mobile data network'.

    Hi all,
    I have recently acquired an iPhone 3G 16GB. It is unlocked and I have put my sim card in (Virgin Mobile) and used it without problem when calling or sending text messages. The internet all works fine when connected to a wi-fi network.
    In the top left hand corner it says '3G', however if I try anything related to the internet (Safari, Twitter etc.) a message will appear reading 'Could not activate mobile data network'. This is very inconvenient for me. All internet related activities work fine when connected to a wi-fi network.
    Is this a problem with all unlocked phones? Is there a solution to this? Or am I simply unable to use the internet without wi-fi on this model?
    Any help would be greatly appreciated, all questions may sound silly, but this is my first iPhone and I am very inexperienced with them!
    Thanks

    First, you don't have a 3G if you have iOS 6.1.4. The 3G cannot go higher than iOS 4.2.1. That is not related to your problem, but worth knowing.
    Let's try the obvious first. Tap the Settings icon. Then tap General. Then Cellular. Is Cellular Data on? Is there an entry for APN? If there is contact your carrier and ask what the APN settings should be. If there is no entry don't worry; the APN is automatic with your carrier.

  • I am from india...my ipad2 is not able to activate cellular data network after i updated it to ios5

    i am from india...my ipad2 is not able to activate cellular data network after i updated it to ios5

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • No network connection or mobile data connection

    So I just bought mine, at first I thought its not a problem, it just take times to get a network line.
    But seriously, the phone rarely got network connection and mobile data, if its got it the mobile data connection is only Edge.
    I thought it was the sim problem.
    There are no problem with the old one as I can still use it on other phone and it gets 3g mobile data connection.
    But still I go and get a new nano sim card just to be sure.
    Is there anything else I need to do or check before I go to the Sony Centre?

    I repaired my device last night using PC Companion.
    Today, when I left the house for work I had a 3G signal and mobile data was working. I drove 20 miles to work, which goes through areas where there is no signal, and when I get to the office I have no mobile data. I reboot and voila, 3G is back.
    This is not acceptable. And as I have had the device more than 14 days, the retailer will not refund me.
    So I am stuck with a £350 phone that doesn't work properly and no-one has any idea how to fix it.

  • After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home. I have restared the phone and toggled the router, still no connection

    After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.

    When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.

  • HT1695 In case any Wi-FI is available and if I choose not to join wi-fi, on iPhone 5 it does not connect to my 3G cellular data network but it connects to 2G data network forcing me to lower speeds in Wi-Fi enabled ares

    In case any Wi-FI is available and if I choose not to join wi-fi, on iPhone 5 it does not connect to my 3G cellular data network but it connects to 2G data network forcing me to lower speeds in Wi-Fi enabled areas.

    This might help
    http://support.apple.com/kb/ht3406

Maybe you are looking for

  • Solaris 10  - After installation read only file system

    Dear All, I have installed the Solaris 10 on my x86 system with out any problem. The installation was completed successfully. I have followed the installation instructions that are mentioned in the following link. http://docs.sun.com/app/docs/doc/817

  • Payment document in purchase order history

    hi friends,                 Customer requirement is to add the payment document(F-53) in the purchase order history in me23n along with GR no. and Invoice no... Is it possible?                                          thank you Edited by: SUJITH BABU

  • How to compare and edit Resource bundle file using java programe

    Hi All I have two resource bundle with key, value and some comments. I need to write a java code to compare both of the values of the keys and if the values are different then i want to replace the second value with the first value. Its a programe wh

  • ORA-12505 - AIX - ProC/C++ - [AIX environment not properly set to NLS?]

    I DO need some help here! I have a C++ program accessing an Oracle 8.0.5 database ( which is set up for american_america.weiso8859p1 as the default language PLUS one more being: brazilian portuguese_brazil.weiso8859p1. When I log to the server which

  • Create vendors in FI system from HR master records of the employee

    Hi,    I need a help. I have tried executing the tcode PRAA i.e the program RPRAPA00  to create a vendor from HR master data. I have maintained all the required information: Actions (Infotype 0000) Organizational Assignment (Infotype 0001) Personal D