X100e, cannot record background sound

Dear all,
My X100e cannot record background sound though it can record sound from microphone.
My Volume control is like below pictures:
http://lh6.ggpht.com/_9kUvjBH2L9A/TRgWkZSo1LI/AAAAAAAABOM/AmBx2OKOgfg/Volume_001.jpg
http://lh4.ggpht.com/_9kUvjBH2L9A/TRgWkTQaEfI/AAAAAAAABOQ/nCooZ10r_Qs/Volume_002.jpg
Rgds,
Linh

Hi, I mean stream music for example.
Here is my case:
My friend and I were in voice conference using Skype, I used Goldwave to record the call but I can only hear my voice and sound in the room only. How can I record his voice as well as record the stream music that was playing on winamp?
Rgds,
Linh

Similar Messages

Cannot record ingame sound with glc (-git)

I have a problem with recording ingame sound with some games with glc (well, glc-git). glc says, it can record sound from games, if they use alsa (or sdl and forcing sdl to use alsa). As long as I don't use pulseaudio, this shouldn't be a problem. But for some games, I can't get the sound recording to work. The 2 at the moment are:
FTL
Amnesia: The Dark Descent
I usually get a message like this:
[ 1.46s alsa_hook error ] 0xa8a8170: unsupported audio format 0x0e
[ 1.46s alsa_hook error ] 0xa8a8170: can't extract hardware configuration: Operation not supported (95)
I can record the game, but not the audio. If someone can help or test it, if it works for him, that might be nice. Or if someone knows a workaround or so. Or if someone can confirm, that there is no audio recording for those 2 games (but I actually don't wanna hear it... :-) ).
Also there are plenty of games, I got the audio recording to work with. You can see it in my youtube-channel: http://www.youtube.com/user/ChemBroTronNo1

doorknob60 wrote:Do you use 64 bit? I don't have a copy of Amnesia downloaded right now, but if Amnesia is a 32 bit binary game, and you use 64 bit, you need to make sure you have the proper 32 bit libraries. lib32-glc will probably be enough.
That's not the issue, the problem is that some games are firing 32-bit float audio (0x0e type as indicated in the error) into ALSA through whatever means, and the standard GLC only supports 16, 24 and 32bit signed int audio. My fork above adds very rudimentary support for float.
Last edited by Darkimmortal (2012-12-02 01:13:35)

Xperia Z2 Cannot record audio sound louder than a bird chirping without distortion!!

Seriously Sony My Nokia 808 Pureview recorded Loud Concerts perfectly!!! Amazing that i spent 450 Euros on the new Z2 Xperia and the audio recording isnt bad is ABSOLUTELY HORRIFIC!! Why have 4K Video if u cant record the sound. Even at a sports event it sounds Horrible... I NEVER had this problem on my Nokia Pureview... PLEASE FIX THIS!!! IT is totally unacceptable for a Flagship device!!

Because the CEO of Nokia is a moron that should have put ANDROID in the Pureview and that would sell a million units!!
But lastly Windows phone has NO let me repeat NO good apps!! If the Apps were equal, I would have absolutely no issue with getting a Nokia Lumia ahnds down!...You cant even get Tinder on a Windows phone!

Cannot record any sound with my M-Audio Fast Track Ultra audio interface

Have been using Logic for about 3 months and was able (primarily via keyboards/midi recording) to create some decent recordings (via the 'hard' way, some books, video training and without bothering a lot of people with many of my questions). Time has come to start with analog audio recording and here my problem starts. Have recently purchased the Fast Track Ultra audio interface from M-Audio.
Drivers are installed correctly. The device is saying that it functions properly. It gets recognized by my iMAC. It gets recognized in Logic and can enable the device in my audio preferences. I can clearly see in the control panel of my USB audio interface it is creating sound and meters are going up and down.
I get sound in my head phones (which are connected to the audio interface) but within Logic no sound is coming in while with the build in microphone everything seems to work fine. Have played around all kind of settings in my audio/midi configuration utility but no result.
Who can help me out ?
Thanks in advance.
Jozef.

Have done a test within Garageband and it works correctly overthere

Cannot record with sound blaster conn

I have purchased a Sound Blaster Connect to convert stuff to mp3. Using line in I can hear sound through headphones on the Connect, Creative MediaSource seems to realise there is sound (monitor moves), but as soon as i try to record, I get a - 'the recording process was aborted' message. I can record to mp3 via WaveStudio but results 'stutter'. Any advice?Message Edited by Brianjay on 05-30-20070: AM

doorknob60 wrote:Do you use 64 bit? I don't have a copy of Amnesia downloaded right now, but if Amnesia is a 32 bit binary game, and you use 64 bit, you need to make sure you have the proper 32 bit libraries. lib32-glc will probably be enough.
That's not the issue, the problem is that some games are firing 32-bit float audio (0x0e type as indicated in the error) into ALSA through whatever means, and the standard GLC only supports 16, 24 and 32bit signed int audio. My fork above adds very rudimentary support for float.
Last edited by Darkimmortal (2012-12-02 01:13:35)

Ipod recording background sound but not voices

whenever i record a video,only the background noises are played while my voice or anyones voice is very very low and i just upgraded to IOS 5.01 and it didnt fix the problem i opened voice memos and started tapping on the mic and the needle moved up while i screamed and it didnt move up at all. please help

No,I don't have it blocked you any sort of thing. But it once got wet 2 weeks ago and since then it wont record my voice..its weird because it can record any background noises like hitting the floor,tapping on the microphone ( voice memo) but it wont record any voice

Garageband recording also background sound

Hi. I'm new to Macbook Pro.
I was trying to use Garageband on my macbook to sing song covers. I inserted the instrumental music, and started a new track for recording my voice. Yet, the voice track was recording not only my voice but also the instrumental music played in the background.
In that way, I could hear the music in my voice track even if I muted the instumental music. When I recorded several tracks, the music volume became very unbalance.
Is there any way to turn off the function how Garageband recording all the background sound played?
Please help me with that.... The version of Garageband I'm using is 6.0.5
Thanks a lot!
Cheers
Katie

I'm using external sound card (KX-2V) with headphones (Superlux HD661) and microphone (iSK BM-900).
Below is the setting I saw in Garageband.
Thanks.

Quicktime Cannot Record Sound

Hello All,
I have a problem with QUICKTIME That i cannot record sound. So i cant really record sounds properly at Least Sound Recorder Works but not Screen Recorder.
SO PLEASE HELP!

I have a problem with QUICKTIME That i cannot record sound. So i cant really record sounds properly at Least Sound Recorder Works but not Screen Recorder.
If you are referring to recording of "system" audio during a screen recording, then that is not a feature "natively" included in QT X and you would have to invest in a third-party app having this built-in option.
If you are referring to mic voice-overs or access to non-native software you have installed, then use the recorder triangle option to select an input option. While you can mic record system audio playing back through your system speakers, the audio is usually of poor quality if the volume is too low or prone to feedback if the volume is set too high.

Cannot record sound, all I hear is stat

Hello, I am trying to record what it being played through my speakers.
Before I purchased my creative audigy sound card I went into the playback control by clicking the icon in the system tray, then clicking options and properties, then recording, then setting my output device (speakers) as input device and that let me record the sound that was being played over my speakers.
I am trying to do that now with teh sound card but there is no suck option, I tried clicking "what you hear" and selecting that as the input device but when I do that and try to record all I hear is loud static.
So how am I supposed to record sound that is being played through my speakers?
-Thanks

Help?

IPhone cannot record and open videos?

It happens today, the iPhone 4 cannot record and open videos. When I try to record, there is flashlight on and off on the top. I dont know why, I know it will show up when I take a photo, but it show up in video taking and it didn't show the time that I record. I look at my Photos, but it show the word "mov" and I click on it it said can't open. PLEASE HELP!!!

I have very similar problems on an iphone 4s, you think it takes video, when on ios 5.1.1 i pressed record button to end shooting video and picture would freeze! This would then freeze the whole camera app by showing the shutter screen and neither the camera or video camera would work. After about 4-5 minutes the phone would unfreeze itself and allow camera shots, but if you tried to take video footage again, exact same fault would arise! Ive tried reinstalling software and full on reset, deleted itunes and refreshed all that, no such luck! After the 4 or so minutes has passed the video would appear as a grey screen in the camera roll, and if i click it to view it, a quicktime Q appears in middle of screen with a black background, you hear the sound from the video but no motion picture!
Tried hard/soft resets, numerous backups with restores, tried using phone as s new iphone it still happens! Ive spoken to apple who say take it to apple store at bristol uk, and they'll swap it for a refurb, but i dont want a refurb I say, as ive had the phone 2 months and paid £250 upfront for the 64gb version, why should I want a swap when components inside phone could possibly be older than the new phone I have?
Just downloaded ios 6, the symptoms are the same, but now the picture doesn't freeze, but after pressing record button to stop recording the timer keeps counting up and red light still flashes! I give up honestly!
I swear its a software fault, as the camera focuses fine and takes a nice photo, even if it is a bit grainy if zoomed in? Is that normal, as its always been like that, but normal non zoomed are brilliant!
Can anyone help me and this guy who asked the same question back in april!
Please help, apple dont know what it is I dont think, which is annoying, they told me ios 6 might fix the issue!
Any advice or help would be greatly appreciated
Cheers
Dean

Cannot record through line-in in bootcamp MBP late summer '09 model

cannot record through line-in in bootcamp MBP late summer '09 model
audio source (mp3 player) <3.5mm male input-------------3.5mm male input> line-in to macbook pro late summer 2009 model bootcamp windows xp sp2
when i select microphone in the audio panel - it works
when i select line-in and plug in the 3.5mm jack input to 3.5mm jack input to a fm radio for ex. it doesn't work
how do i make the line-in work?
i remember that when i first installed mac osx sl and windows xp bootcamp - the first couple of times around when partitioning the hd - the line-in worked a couple of times, in between times somewhere along the line i made some change to the spdif settings ?? or driver / to make the red light that comes on in the line-in jack go away - the other method was to use a toothpick to push a tiny button inside the jack, did that once -but the redlight came back again after a restart on bootcamp side.
thanks in advance,
-r

Although I don't use it, the Line-Input jack should require a signal about 40dB higher than what a microphone alone puts out. If your cable only adapts the connector and does not provide amplification, I'm not surprised you get nothing. If you are lucky, you MIGHT get a low signal by going into System Prefs/Sound/input/line-in and turning the input level slider all the way up. But the real answer to to get a mike preamp or mixer, or a mike with line-level output. Some products take a mike input and convert it to digital into the USB port.

What is the best method to embed background sound?

I've tried several methods and they either simply do not work or a plugin icon is displayed...I just want to embed it invisibly , and of course effectively.

Hi Mike,
most of the people here in the forum will advise against background sound. If you can't resist, there I tried one possibility (see code):
http://www.goldschmiede-blumberg.de/AdobTest/musik.php
In any case you should to ensure that your visitors can switch off your music. That's way I recommend that one/you can see the tape recorder.Hans-G.

I have a line 6 UX1 interface, garageband is seeing it but i cannot get any sound to play

I am new to Mac, I have a Line 6 UX1 interface and am struggling to make it work on garageband. I can choose it but cannot get any sound to record or play through the mac

Fat Bob Blues wrote:
When i play the guitar the sound level bar on the instrument bar moves slightly but no sound can be heard
http://www.bulletsandbones.com/GB/GBFAQ.html#usecomputersspeakers
(Let the page FULLY load. The link to your answer is at the top of your screen)

After upgrading to IOS8.1 my microphone stopped working. cannot make a call, cannot record a voice memo, but Siri works !!!

after upgrading to IOS8.1 my microphone stopped working. cannot make a call, cannot record a voice memo, but Siri works !!! Surely this must be software since I presume there are not two microphones, one for Siri and one for everything else. Tried resetting, rebooting, switching off noise cancelling. What else is there?

Hi there hansadj,
You may find the microphone troubleshooting steps in the article below helpful.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
-Griff W.

Picking up background sound in room

HI there,
I am trying to capture screen and sound, but the background sound in the room I am in is coming back on the recording, just wondering how I can shut off the mic for the external sound, and only record what is coming through on the screen. Desperately seeking input here. Thanks Oh I have a Toshiba Satellite using windows 7 operating system. If any of that helps.

Wait, FYI - I figured it out by putting the tailpipe AS code in its own actions layer directly above the "Tailpipe" layer.
Thanks anyway...

X100e, cannot record background sound

Similar Messages

Maybe you are looking for