X100e problems with the BIOS update

Hello, this is my first message and my english is not so good.
I have a problem on my X100e to make a BIOS update.
I download the newest update from Lenovo and burn a CD.
At next i boot from this CD with the X100e and the update starts.
But after a few second comes the message the file is damage.
So i try this with different update versions, but it is still the same result.
My BIOS version now is 1.04
What is my mistake?
Best wishes
deti330

Thanks for your quick response.
Quote
Originally posted by wonkanoby
is cmos jumper on keep and whats vbat showing in pc health
Should`nt the jumper be on keep by default?
vbat(is that the same as battery in the pc health menuP): 2.96
Dacourt

Similar Messages

  • Problems with the windows update site in 32-bit Vista Business

    Hi Everyone,
    I am experiencing problems with the windows update site. As far as I know it shold make a link to the Windows Update module on-board and show the available updates after scanning. However, I get to the page that says "Checking if your computer has the latest version of Windows updating software for use with this website" and the next page I get is "The website has encountered a problem and cannot display the page you are trying to view". The error number is 0x80070002. I go to the knowledge base and delete the content of the Data Store folder as advised, but to no use at all. Active X controls are enabled Java is working fine. I've cleaned the register and everything, did a complete scan with Onecare as advised by Microsoft, which did not find anything but again the same error message. I am using KIS 2009 and I am sure I have no viruses or any other malware. I even tried to go to the update site with the KIS switched off but to no avail too. On the other hand I don't have problems with the automtic updates and when I run a manual update from the Update module everything is OK. Do you have any suggestion as to what might be the issue with the website updates?
    P.S. I am using 32-bit Windows Vista Business on a Lenovo W500.

    hello
    You may be having a problem with the windows update agent.Since its a problem relating to windows update microsoft support personnel may help you out.follow this link and contact them by chat or email
    http://support.microsoft.com/common/international.aspx?gprid=6527&acty=Start&ctl=Region&wf=Workflow&... 
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • I am having major problems with the latest update for my itunes!

    I am having problems with the latest update for itunes, it says 'itunes has an invalid signature'. I have completely uninstalled itunes but now it wont download at all. Have tried downloading it 4 times tonight already. Anyone know how to get it to download? Or what to do?

    I am having problems with the latest update for itunes, it says 'itunes has an invalid signature'.
    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Was there a problem with the last update? Every time I try to watch a video on the net it goes back to the home screen

    Was there a problem with the last update? Every time I try to watch videos it goes back to the home screen

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • MOVED: Big problem with the bios

    This topic has been moved to BIOS.
    Big problem with the bios

    You're not alone... https://discussions.apple.com/thread/3391947?tstart=0

  • K8N Neo2: Another problem with the BIOS 1.9

    I flashed my K8N Neo2 with the BIOS 1.9, I lost the MAC address of the NVIDIA NIC. I fixed the problem reflashing the BIOS with the /nvmac:XXXXXXXXXXXX /wb options. Loaded the default settings and set the boot priority, the new BIOS is unable to boot from my Adaptec 19160 SCSI controller: it try always to boot to the NVIDIA NIC. It seems that the NVIDIA NIC has a higher boot priority than other external boot devices and it's impossible to change it.
    The settings are:
    First boot divice: Floppy
    Secind boot device: Hard-Disk
    Third boot device: CD-Rom
    Hard disk boot priority:
    1. Adaptec SCSI
    2. NV RAID
    3. Other boot device
    I reflashed the BIOS with the old 1.8 and now the system works well ...
    Thank you for the attention

    See Thread this index called  "Neo2 bios flash to 1.9 = dead nvidia lan" 

  • Problems with the new update on iPad

    Hi, i just installed the new update on my i pad and now its not working anymore, it keeps trying to open, but it doesnt even got past the black background with the apple logo on it, then it closes and reopens after, and its going on and on since yesterday, what can i do? I bought my iPad 2 years ago now, but i've been caring alot for it, its in really good shape and all, is there anything i can do to fix the problem or do i have to go to the apple store... and even there, will they fix it or tell me to buy a new one...

    Thanks for your answer,
    I already tried holding both the Home button and Sleep/Wake buttons but it didn't work, and since my iPad is not staying open long enough it doesn't connect to my itunes...
    I really tried everything i know but still it doesn't change anything.
    Marie-Claude

  • Is there any problem with the new update 6.1.2 for iphone 5?

    After I updated my iphone 5 to the new update there seems to be some difficulties with the camera. I get pink lines everywhere. It is a matter of seconds before it gets clear and again pink. But the problem started after the update. I asked other people who use iphone 5 and they said they didnt have the same problem. Its kinda weird I think. any suggestions?

    Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the red slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Remove the camera app from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red to delete the Camera app from this list.
    - Press the home button twice when done.
    - Restart the Camera app
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • Problem with the firmware update...

    Now I have a new problem... I had the Xserve on my intranet so long that when I went to update it and plugged it into the Internet, there seems to be a firmware update. I started the update, and its supposed to come up with a status bar, but so far nothing. It's been 4 hours, and the screen is not getting a signal. I'm afraid that if I turn the system off and the system is actually upgrading the firmware that will mess up the system royally. I'm going to leave it for the next 24 hours, but if it's still sitting there chugging away with the blank screen, I'm going to have to turn it off.
    Have any of you seen this problem? I may try and reset the firmware. I never had these problems until now... it's starting to get aggravating...

    Clearly I have to answer my own questions in the server forums...
    For anyone who may end up with a similar issue and finds this. Your firmware update probably didn't work correctly, download the Apple Firmware Restoration CD. Make sure you find the correct version for your computer, like my version was 1.4.
    Dave

  • Problems with the latest update of software

    Hello everybody, first of all I may write some words wrong because my language is not english but what I have to say is that I have a BIG problem with my Ipad, yesterday (03-06-2014) a new update arrived to my Ipad and I accepted the update, a few minutes after I saw the download running but after a hour the download completly stopped, I asked to a friend of mine if this is normal and she said that it was going to take the whole night to do the update, today (04-06-2014) i woke up and the update was at the same place, now what am I going to do? Am i going to lose everything that I had in my Ipad? Has this only happen to me? Why has my Ipad blocked? Am I going to be told that my Ipad has no arregement just because of this?
    Attention: my Ipad has IOS 7.

    awm7353 wrote:
    How do I reset it? I have pushed every button on it and nothing happens.
    Hold down on the home and power/sleep buttons at the same time for a few seconds and the iPad should restart.

  • Embedded Controller update (which is included with the BIOS update) for my T400

    I have a T400. That's all I know.  I'm supposed to dwonload one of these two updates. 
    ThinkPad                                              Package version     BIOS version              Embedded Controller version 
    T400 (with IEEE 1394 models)        3.09-1.05                  3.09 (7UET79WW)     1.05 (7VHT15WW)
    or a
    T400 (without IEEE 1394 models)   3.10-1.05                 3.10 (7VET80WW)      1.05 (7VHT15WW)
    How do I know which one?   
    This answer didn't come with the download directions so a non-techie (me) cannot go further.
    Please help me with this.
    Thank you,
    John

    Hi johnslenovo,
    To check if you have 32 bit or 64 bit Windows installed do check our KB Article on this.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • So does anyone have any info on if apple know about all the problems with the iTunes update?

    By problems I mean:
    . The unability to sync music from your laptop/computer to your apple device
    . The slowness
    . Unable to log in
    . Being told that the laptop/computer being used isn't recognised
    . Clicking on music and it flicking through really quick without playing and then not playing after, but still being on apple device.
    + all the other problems i've seen mentioned on this page. It's pretty clear the new updates have glitches that urgently need fixing and a lot of people are encountering some or multiple of these problems.
    I've not seen or heard any announcement whether they know or not or if they're doing something to fix this, because they need to. Urgently.

    Hi JamilMereck,
    first of: you can edit previous posts in a time-frame of some minutes (haven't measured it ...).
    After that they become non-editable.
    I admit I have used microphones some years back with and without PCs (have switched to Macs 2.5 years ago).
    But I always had the mics connected to a mixing desk, which provided Phantom Power.
    Since I gave up my 'Singing Career' (wasn't good enough) I also abandoned the use of microphones.
    To your questions:
    It might be that PCs with specified Microphone-In ports are also providing power to them or the microphones themselves do not need any power.
    And the 'compatible with...' refers to the usage on computers in general.
    The iMic from Griffin works with OSX 10.5 (scroll down on the webpage to 'Product Compatibility' the left icon symbolizes OSX 10.5).
    As said above, I am no longer up-to-date in usage of microphones, but when you want to use a microphone with the standard connector you have to get either a microphone preamp or a mixer.
    If you use the mic only (really only) with your Mac Pro, you might wanna look for USB-connected mics from Samson or Audio Technica for example.
    And don't get upset, I understand you fully and any kind of 'insult' is for the manufacturers and not for me
    Stefan

  • Just admit there is a problem with the latest update.

    Why keep telling people to uninstall, install, update, test, check, double check, test again....When all the solutions being suggested just don't work for most people.
    There is obviously a big problem, over the last two days i have done almost everything that has been suggested, and more, and still there is a problem on both computers in my home.

    Hi, What you are describing is called Troubleshooting. It would be very easy if your opinion was true, but it isn't. Have you ever read the multiple Microsoft, Firefox, Apple, Motorola, AT&T, Sprint, Verizon, HP, Youtube and Dell FORUMS? Well, I have and do and I can tell you I'm surprised that Adobe Flash Player can design a Flash Player to work in and around all of those Operating Systems and Technology Companies!! And there are hundreds of more companies that I do not have time to mention.
    And no, I am not an Employee of Adobe.
    Not every solution is going to work for every computer configuration, that is #1.
    When people take their computers in for repair, there is an advantage, to wit: they have the computer and they can see and test it.
    Here on the Forum, we that help don't have that advantage. That is why the questions are asked and various actions are requested.
    If you want help, reply back with your operating system and browser(s) versions.
    Thanks,
    eidnolb

  • Is anyone having problems with the newest update of ITunes and then trying to update the Iphone 4?

    I updated the ITunes on the computer and that went ok, but when i went to go and update the IPhone 4 it went to restore it to the factory settings and then something happened where it wouldn't let it update and now the phone is stuck in Limbo world with the apple symbol showing and a status bar, but nothing else. also the phone is not showing up as being plugged in while in this limbo faze.

    Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

  • Problems with the BIOS clock

    Hey,
    I`ve just purchased the MSI 875P mainboard. The board is running smoothly with bios version 1.4, but there is this small and anoying problem; The bios clock will not work. I set the time and date in the bios and when I go back in five minutes later the time and date are exactly the same.
    Anyone else have this problem and is there a sollution for this?
    Dacourt
    Raidmax case
    P4 2,6HT 800 mhz fsb
    MSI 875P Neo-FIS2R
    Geil 512 DDR ram 400 mhz
    Creative Riva TNT2 which will be replaced with the  Sapphire Radeon 9700 on monday
    Samsung syncmaster 172t LCD

    Thanks for your quick response.
    Quote
    Originally posted by wonkanoby
    is cmos jumper on keep and whats vbat showing in pc health
    Should`nt the jumper be on keep by default?
    vbat(is that the same as battery in the pc health menuP): 2.96
    Dacourt

Maybe you are looking for