X100e Ubuntu 10.10 - install notes; HDAPS & WLAN issues
I've installed Lubuntu 10.10 on my X100e.
Notes on install:
1. 10.10 is much easier to get working than 10.04.1; both booted via Unetbootin on a USB drive
2. Specify radeon.modeset=0, but NOT xforcevesa -- otherwise, it freezes quick.
3. Install fglrx with Jockey; radeon is susceptible to freezing eventually.
It may ocassionally freeze at this point, but rarely.
4. Install tp_smapi_dkms; hdapsd would be nice, BUT the accelerometer drivers (thinkpad_ec & hdaps)
appear to not work on the X100e now.
5. rtl8192se_pci module loads; functional, but unreliable (WLAN drops frequently, sometimes can't see AP); it seemed more reliable on battery, oddly enough.
Anyone have comments on the accelerometer?
I expected as much of the wireless.
Thanks for responding. Here's the output:
root@bguan-md:~# gcc -v
Using built-in specs.
Target: x86_64-linux-gnu
Configured with: ../src/configure -v with-pkgversion='Ubuntu/Linaro 4.4.4-14ubuntu5' with-bugurl=file:///usr/share/doc/gcc-4.4/README.Bugs enable-languages=c,c++,fortran,objc,obj-c++ prefix=/usr program-suffix=-4.4 enable-shared enable-multiarch enable-linker-build-id with-system-zlib libexecdir=/usr/lib without-included-gettext enable-threads=posix with-gxx-include-dir=/usr/include/c++/4.4 libdir=/usr/lib enable-nls with-sysroot=/ enable-clocale=gnu enable-libstdcxx-debug enable-objc-gc disable-werror with-arch-32=i686 with-tune=generic enable-checking=release build=x86_64-linux-gnu host=x86_64-linux-gnu target=x86_64-linux-gnu
Thread model: posix
gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5)
root@bguan-md:~# dpkg -l | grep libai
ii libaiksaurus-1.2-0c2a 1.2.1+dev-0.12-6build2 an English-language thesaurus (development)
ii libaiksaurus-1.2-data 1.2.1+dev-0.12-6build2 an English-language thesaurus (data)
ii libaiksaurusgtk-1.2-0c2a 1.2.1+dev-0.12-6build2 graphical interface to the Aiksaurus toolkit (library)
ii libaio-dev 0.3.107-7ubuntu1 Linux kernel AIO access library - development files
ii libaio1 0.3.107-7ubuntu1 Linux kernel AIO access library - shared library
Similar Messages
-
HP Officejet 8500 Pro A909n-Installed Win 8.1- tried HP Sol Ctr&says "device install not complete"
I was shocked when I was trying to do my reports yesterday, after upgrading to Win 8.1 and finding the driver for my OJ 8500 WILL NOT WORK in printing off ADOBE which lead to me trying to open the HP Solution Center and it just pops up a box that says HP Solution Center cannot run because device install NOT COMPLETE. I am losing time and money trying to figure out what I THOUGHT WAS SURE to be ADDRESSED BY HP. I am upgrading the entire office in another state....is this going to be an ongoing issue? Is there a better printer solution which keeps up with the operating systems? Please help.
Hi Mtnman,
I understand you're having issues with the Solution Center program after upgrading to Windows 8.1. I'm sorry to hear you're having issues but I will do my best to help.
I'd like you to uninstall your HP printer software (if you have an HP computer, make sure you are only removing HP printer software from the computer) and once it's been completely removed we will want to attempt to reinstall. To reinstall the software I'd like you to download and run the HP Printer Install Wizard to get the software downloaded and reinstalled.
Hope this helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP -
Firefox 3.6.11 / 3.6.12 is not being installed / not opening in my Mac 10.6.4 Plz Help.
Firefox 3.6.11 / 3.6.12 is not being installed / not opening in my Mac 10.6.4
Please Help.
- BhaveshFirefox 3.6.x versions are still updated with security patches (Firefox 3.6.18 is due in about two weeks).
You are unfortunately out of luck with an Intel Mac and OS X 10.4.11.<br />
There is a compatible version from for a PowerPC Mac, but no alternative for an Intel Mac. -
my firefox 7.0.1 in my ubuntu 11.10 is not show the text in every website it just show the pict and some chineese alphabet
Upgrade your browser to Firefox 8 and check
* getfirefox.com -
How come I'm not asked for password for every app purchase, app auto downloads once I tap install, not good when my kids start buying apps because they are not asked for password, help!!
Thank you for the help, have sorted it through Restrictions in General settings now : )
No more mysterious app purchases on my c.card now thank god !!
You would think they would set as default that Password was required - Imediatly . But they know there likely to get more purchases the way the default set it..
Thanks again for prompt reply!!! -
Ipad mini working sluggish after installing ios7 why apple is not fixing this issue
Ipad mini working sluggish after installing ios7 why apple is not fixing this issue
Now it doesn't feels like i m using an apple device .
idevices should be flawless thats what it was(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset. -
Ipad2 losses cell connection now that iOS 8 was installed. Ios 8.0.2 did NOT correct the issue. Come on and fix this issue!
Hey everyone-
Im in the same boat, started a thread . My hands free system worked fine with iOS 8 out of the box new iphone 6. Did the update this morning and i can stream music perfectly fine however i cannot make or receive calls through hands free system.
I have not tried resetting the settings like most people indicate is working. I feel like I shouldn't have to reset anything, even less mess with settings with an update coming from apple. it should "Just Work"
Some people who reset said it works for a few hours, other say it don't work, and I don't know what I should do.
Car: Hyundai Sonata 2014
NOTE: I was able to replicate the issue in my wifes Hyunday Elentra 2013.
This is how I know its not a defect with the BT in my car. -
Terms of payment specifying payment by installment not possible here
Hi Expert,
I create new payment term in T-code OBB8 and OBB9.
When I create PO I found Error Message no. 06754 (terms of payment specifying payment by installment not possible here).
How to solve it ?
Thank,I think you have checked the Indicator: Term for installment payment in the payment term.(OBB8)
That's the reason you are getting this error message.
Use
Terms for installment payment are used as an entry tool when entering
documents in Financial Accounting. Instead of entering several line
items, you only enter the data for one item. The breakdown is carried out
by the system automatically by means of the payment terms.
Procedure
Set this indicator if several items with different due dates are to be
generated from one line item when using this payment term.
Dependencies
For all payment terms that stand for an installment payment, the
percentage specifications must be defined for the breakdown of the total
amount. In addition, you must specify which payment terms are to be valid
for the resulting partial amount for each percentage rate.
The terms of payment key can determine the following:
The valid cash discount rate for an individual payment with a maximum of 3 payment terms (first cash discount period, second cash discount period and due date for net payment) and also a baseline date for the payment, or
The terms of payment for installment payments.
If you have maintained a key for the terms of payment in the vendor master record, the system automatically defaults this key whenever you enter an item for this vendor.
The following description applies to individual payments. For more information on the terms of payment for installment payments, see Terms of Payment for Installment Payments (Accounts Payable) -
Flash Player 10.2 will not install - not same problem as Audrey below.
Hi,
Using Win 7 home deluxe, was using Flash player no problem until the office had me uninstall it to fix another problem but now will not reinstall, keeps insisting on installing Mc Afee alongside it and then Mc Afee won't install correctly and won't allow Flash Player to install either.
Have repeatedly uninstalled the full Adobe free software suite, and Mc Afee and started from the beginning have tried using the 32 bit IE instead of thr 64 bit, when the window comes up showing the registration it only shows the Quit button will not let me use the Agree or Install button and again and again it keeps installing Mc Afee without being asked, I don't use or need Mc Afee as have Nortons. I have also been turning off the norton antivrus while doing the installation as i know that can interfere with it.
been trying this on and off for some days now, multiple times, and I do need to get this fixed I would appreciate some advice thanks
TYes Friend and I posted a message of thanks also which I'm very pleased to send to you personally, the missing link was that little check box you mentioned, I had done the install or tried to many times but never seen that small box so that was the problem.
Very grateful - thanks very much for your time and patience !!
Best Regards
Tim
Date: Thu, 14 Apr 2011 10:53:23 -0600
From: [email protected]
To:
Subject: Flash Player Flash Player 10.2 will not install - not same problem as Audrey below.
Hi, Since you marked your thread as answered, I'm assuming you have FP Installed and working!!
Thanks,
eidnolb
>
Message was edited by: Timsan55 -
After installing IOS6:
After erasing the history of Safari, the next time I fire up Safari, I see a split-second of the last displayed screen of Safari.
Not a big issue but it should not be that way.Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
sir have this error so what can i do The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
It looks like the iPhone is locked to a carrier that is not the one you are trying to use.
You need to determine which carrier it is locked to and then contact them to see if they are willing to authorise the unlocking of your iPhone. As ManSinha mentioned, many carriers will only authorised the unlock if requested by the customer who had the contract with them for this iPhone.
Remember that only the carrier who owns the lock on your Iphone can authorise Apple to unlock the iPhone in their servers. You need to contact the carrier or have the previous owner of the iPhone request the unlocking. -
the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another SIM card from supported carrier or request that this iPhone be unlocked by your carrier.
Similar issue
here is the description
I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!! -
The Sim card that you currently have installed in this iphone is from a carrier that is not supprotedunder the activation policy that is currently assigned by the activation server. this is not a hardware issue with the iphone. please insert another sim card from a supported carrier or request that this iphone be unlocked by your carrier.please contact apple for more information.
I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!! -
Trial versions: How to install notes and/or support packs
Is it possible to install notes and support packs in a trial system?
Can a connection with SAPOSS be made?The software you downloaded is for Mac OS X; to get the Mac OS 9 version of the software, download the file for your language from the following pages (iPod, iTunes). The Mac OS 9 iPod software only works for first and second generation iPods, and requires 9.21 to run. Mac OS 9's iTunes will only sync first and second generation iPods, as well as third generation iPods which are running version 2.0x of the firmware.
(10502) -
Installed/not Applicable Percentage column
When i look at the WSUS 3.0 SP2 console (Server 2008) all of our computers show 99% as value for Installed/not Applicable Percentage column.
Why would it not be 100%
Anything i can do.would that imply that i havent approved those 100 updates or something else.
More likely that you've missed a *few* updates, and the remaining 90+% are superseded and irrelevant.
99% Installed/NotApplicable with 100+ Needed updates is highly unusual, but possible. I have a relatively new Win7SP1 system that's 99% Installed/NotApplicable with 95 updates "needed".
But you really need to be looking at *updates* not computers. Find the not-superseded updates where needed > 0.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.
Maybe you are looking for
-
Hi all, Have created a new window in one of the scripts recently. I was asked to display this window( with some data) only for company code NL01. So I kept the condition , IF reguh-zbukr = 'NL01'..and wrote the code.. Now Im asked to extend the func
-
Hi, can anyone please tell me how to install the Nik collection into Adobe Photoshop CC 2014.2.1
Hi, can anyone please tell me how to install the Nik collection into Adobe Photoshop CC 2014.2.1 ?
-
Web Service SOAP Sender Authentication issue
Hi Experts, Synch Scenario: Webservice call from SOAP client-> XI -> RFC Bapi call to R/3 and back to SOAP client with data. Soap Adapter on J2ee receives and process call ok, the error we are getting is on connection from AFW to IS; the error in the
-
Certain special characters which display correctly in Explorer do not display correctly in Firefox. Example: <font COLOR="#1f1a17" FACE="Symbol" SIZE="3">¬</font> Is there a fix?
-
Unable at times to move a firefox window to a 2nd monitor
I have 2 monitors. I open a firefox window on the primary, I then try to "grab" the window and move it to the 2nd monitor. I can't "grab" the window. After multiple attempts I can finally "grab" the window and move it.