X100e - Wireless is on and not working
Hi guys,
I am completely new to the forums and to thinkpads. I have had my think pad for 2 months. Till yesterday everything was working well, until I decided to update the drivers. After it the wireless stoped working. Problem is exactly the same as:
http://forums.lenovo.com/t5/ThinkPad-Edge/Wireless-apparently-active-but-not-working/m-p/280548
However, the solution does not work for me. All my drivers are up to date. I did reinstall the Realtek driver, access connections and updated bios without any luck. Clicking repair does not solve the problem. The wireless is not shut off in the BIOS. Do you guys have anything in mind?
Additional details:
Connection status: Not connected
Cause: Association failed - wireless radio not powered on.
Error code: 016
Recommended action:
Communication with access point could not be established because the wireless radio is off. To power on the radio and attempt to connect, click Repair.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
Adapter name 11b/g/n Wireless LAN Mini-PCI Express Adapter II
Adapter type Wireless LAN
Adapter speed 54 Mbps
Driver/Firmware version 2017.2.730.2010/ N/A
Adapter status Enabled
Connection Status Not connected
Disable unused cards? Yes
TCP/IP Settings
DHCP enabled? Yes
Append parent suffixes of the primary DNS suffix? Yes
Register connection's DNS suffix in registration? Yes
Register connection's DNS suffix in DNS registration? Yes
Enable LMHOSTS Lookup? No
NetBIOS setting "Default"
Wireless Settings
Network name (SSID)
Connection type Unknown
Security encryption Configured by Windows
System Information
System model 35089JG
BIOS version 6XET41WW (1.25 )
Operating system version Windows 7
Access connections version 5.72
Access Point scan list
Network name (SSID) Wireless mode MAC address Signal strength Channel
Global Settings
Network
Allow Windows users without administrator privileges to create and apply location profiles ->No
Allow the wireless LAN radio to be turned off when inactive -> Yes
Enable autodeletion of unused profiles -> No
Disable the Peer to Peer community feature -> Yes
Enable SMS feature -> Yes
Allow selection of location profiles with Fn+F5 On Screen Display menu -> Yes
Notifications
Show ThinkVantage Access Connections status icon in task tray -> No
Show wireless status icon in task tray -> No
Display the progress indicator window when a profile is being applied -> Yes
Show Access connections Gauge in task bar -> Yes
Preferences
Enable sound effects -> No
Do not show balloon tips from the Access Connections system tray icon -> Yes
Do not show balloon tips from the Access connections Gauge -> Yes
Show WiMAX page as default on Main GUI -> No
Hello,
A couple of things to try:
Toggle the Wi-Fi radio on and off by pressing the Fn+F5 key combination.
Open the Device Manager (filename: DEVMGMT.MSC), remove the wireless adapter, then reboot and let Windows re-detect it.
Let us know the results of the above, and we can proceed from there.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество
Similar Messages
-
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.
Go to Finder > Preferences then select the General tab
Make sure External disks is selected. -
Flashing light in Wrotham supply. And not working wi-fi..
Hello.
Flashing light in Wrotham supply.
And not working wi-fi, or rather does not recognize the access point.
They are not on the list .
But the access point is at hand.
Please send me the answer to email (Personal information removed by Moderator)Hi @Game_Developer
Welcome to the HP Support Forums!
I understand that you are having trouble with wifi connectivity. What light is flashing on that supply? I assume it is the power supply.
Have you tried your notebook with a different wireless network?
Do other devices connect to your router without any trouble?
I would start with this to make sure the wireless is working properly on the notebook, or appears correctly in device manager.
Resolving Universal WLAN, Wireless, and Wi-Fi Errors
And only after verfying that all is good, would you want to look at the following steps, if you are still having troubles.
Troubleshooting wireless network and Internet (Windows 8)
Also, you can look at the power management for your wireless adapter:
Disable the Power Off option for the adapter:
1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)
2. Expand the Network adapters.
3. Right click on the Ethernet/Wireless Adapter and click Properties.
4. Click the Power Management tab.
5. Remove the check mark beside Allow the computer to turn off this device to save power.
6. Click OK.
7. Test.
Forget the network: (Windows 8)
1. Press Windows Key + C
2. Click Settings.
3. Click Change PC settings.
4. Click Network on the left.
5. Click Manage known networks.
6. Click the network name.
7. Click Forget.
Reset the TCP/IP settings on your PC:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.
4. Restart your PC and test.
It may also help to reset the winsock catalogue:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh winsock reset" without quotes, and press enter.
4. Restart your PC and test.
Reinstall the network adapter drivers:
1. Download the drivers from here but do not run them yet.
2. Go to your start screen/menu and type Device Manager.
3. Expand Network adapters.
4. Right click on the wireless adapter and choose Uninstall.
5. Run the downloaded drivers from step 1.
6. Restart your PC and test.
Test an ethernet connection:
Self explanatory. Test if the issue persists on a wired connection to rule out the wireless adapter hardware so troubleshooting can be directed towards the right areas.
Test another connection:
Many people rule out their home network as an issue if another device is working on the same network. Networking is not that simple. Each device interacts differently with your router or modem and it is impossible to rule out settings in that device until the notebook has been tested on another network.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
HT1338 wireless keyboard letters are not working
My wireless keyboard letters are not working after i using retouch option on aperture
Thanks
Vicsuperdupertyn wrote:
i left my macbook pro open for along period of time,
after i open it
What did you open if if was already opened?
As for your non-working keys, perhaps debris somehow got beneath the keys. Especially if you were eating while using your computer. Spilled anything on the keys lately or previously?
How to remove and clean your Macbook Pro Keyboard
Cleaning Macbook keys after a spill
If none of the above applies to you, you could have a hardware issue. If you have Apple Care, call them and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.
Liquid damage is not covered under Apple's standard 1 year warranty or Apple Care.
NOTE: If you are out of warranty and purchased the computer with a credit card, discuss the warranty issue with the credit card company which you purchased the computer with. They are the only ones who can at this point cover the computer after it goes out of warranty with the manufacturer (Apple).
If you have Homeowners insurance, place a claim with them. -
Minus and - not working in query
Hi all,
I am operating on 10G R/2.
I have thsi query where thi sstatement <pre>(COUNT(W_O) - COUNT(W_I))</pre> TOTAL is returning 0.Why is the minus and '-' not working out in this query?.
<Pre>
SELECT
TRUNC(DT) week_start ,
next_day (TRUNC( DT) - 7, 'Sunday' ) + 6 week_end ,
to_number(to_char(DT,'FMWW'))wk_no ,
'I_'||W_I AS IO ,
COUNT(W_I) TOTAL
FROM TABLE_A
WHERE W_I IS NOT NULL
GROUP BY TRUNC(DT),
next_day (TRUNC( DT) - 7, 'Sunday' ) + 6,
to_number(to_char(DT,'FMWW')),
'I_'||W_I
UNION ALL
SELECT
TRUNC(DT) week_start ,
next_day (TRUNC( DT) - 7, 'Saturday' ) + 6 week_end ,
to_number(to_char(DT,'FMWW'))wk_no ,
'O_'||W_O AS IO,
(COUNT(W_O) - COUNT(W_I)) TOTAL
FROM TABLE_A
WHERE W_O IS NOT NULL
GROUP BY
TRUNC(DT),
to_number(to_char(DT,'FMWW')), 'O_'||W_O
</pre>
Edited by: CrackerJack on Jun 14, 2011 8:06 PMbasic maths
SQL> select count(object_name), count(owner), count(object_name) - count(owner)
2 from all_objects;
COUNT(OBJECT_NAME) COUNT(OWNER) COUNT(OBJECT_NAME)-COUNT(OWNER)
52658 52658 0
1 row selected.if you take away a number from itself you will get zero. I think you may mean SUM() rather than COUNT() -
Auto To working for one material and not working for other material
Hi,
Hope everybody is doing fine.
I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
I didn't setup the back ground processing job. Is that is affecting it?
thanks for any help.
regrads,
KHANThnaks,
You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
Appreciate your time charlie -
I have bought iphone 4s on July 12, 2012.in Zurich in offical Apple store (Glattzentrum) and after one and a half months it just turned off and not working since. I tried three charges and nothing (it detects that charger is on but it cannot be charged). So now I have a not working phone only two and something months after purchase. But the problem is that in Croatia we have two apple reseller stores and neither don't want to exchange it, although is under warranty!!!! The closest stores are 250 km from Zagreb...Of course I have contacted Apple store in Zurich but they told me to come in Switzerland or to send credit card data for receiving new iphone, the problem is I don't have credit card with 700 euro on it!!!! what to do?? who to call ??? where to get replacment device cause this is disaster???? I wanted to buy ipad but after all this I doubt to do so...I have not working Iphone payed around 700 chf or 800 usd and cannot change it in my country, is it possible for such vast organization like apple that this things can occur????? So much for customer support
“the EU is considered one country for warranty purposes“
Not the case at all whilst there are harmonized minimum standards governing guarantees, warrantees remain national as these vary (Add to) minimum legal protection.
Some how you need to get your phone back to Switzerland. -
made in cosmos help please need it
using System;
using Cosmos.Compiler.Builder;
using System.Threading;
using System.Windows.Forms;
namespace IUOS
class Program
#region Cosmos Builder logic
// Most users wont touch this. This will call the Cosmos Build tool
[STAThread]
static void Main(string[] args)
BuildUI.Run();
#endregion
// Main entry point of the kernel
public static void Init()
var xBoot = new Cosmos.Sys.Boot();
xBoot.Execute();
Console.ForegroundColor = ConsoleColor.DarkBlue;
a:
Console.WriteLine("------------------------------");
Console.WriteLine("WELCOME TO THE NEWLY OS MADE BY THE STUDENTS OF IQRA UNIVERSITY!");
Console.WriteLine("------------------------------");
Console.WriteLine();
Console.WriteLine();
Console.WriteLine();
Console.WriteLine("\t _____
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |___________");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t|_____| |____________| |____________| ____________");
string input;
Console.WriteLine();
Console.Write("\nAbout OS : a");
Console.Write("\nTo Shutdown : s");
Console.Write("\nTo Reboot : r");
Console.Write("\nStart Windows Normaly : n");
Console.WriteLine();
input = Console.ReadLine();
if (input == "s" || input == "S"){
Cosmos.Sys.Deboot.ShutDown();
else
if (input == "r" || input == "R"){
Cosmos.Sys.Deboot.Reboot();
else
if (input == "a" || input == "A"){
Console.ForegroundColor = ConsoleColor.DarkBlue;
Console.Clear();
Console.WriteLine("\n\n\n-------------------------------------");
Console.WriteLine("version: DISPLAYS OS VERSION");
Console.WriteLine("about: DISPLAYS INFO ABOUT ANGRY OS");
Console.WriteLine("hello or hi: DISPLAYS A HELLO WORLD");
Console.WriteLine("MESSAGE THAT WAS USED TO TEST THIS OS!!");
Console.WriteLine("-----------------------------------");
Console.Write("You Want to know : ");
input = Console.ReadLine();
if (input == "version"){
Console.WriteLine("--------------------");
Console.WriteLine("OS VERSION 0.1");
Console.WriteLine("--------------------");
else
if (input == "about"){
Console.WriteLine("--------------------------------------------");
Console.WriteLine("OS IS DEVELOPED BY Qazi Jalil-ur-Rahman & Syed Akber Abbas Jafri");
Console.WriteLine("--------------------------------------------");
Console.Write("Want to go back to the main window");
Console.Write("\nYes : ");
string ans = Console.ReadLine();
if (ans == "y" || ans == "Y")
goto a;
Thread.Sleep(10000);
else
if (input == "n" || input == "N")
Thread.Sleep(5000);
Console.Clear();
for (int i = 0; i <= 0; i++){
Console.Write("\n\n\n\n\t\t\t\t\t ____ ____ ___
Console.Write("\n\t\t|\t\t | | | |
| | | | | |");
Console.Write("\n\t\t|\t| | |---- | |
| | | | | |---");
Console.Write("\n\t\t|____|____| |____ |___ |____ |___| | | |___");
Thread.Sleep(500);
Thread.Sleep(5000);
Console.Clear();
BootUserInterface();
Console.ReadLine();
// Form1 fo = new Form1();
else{
for (int i = 0; i <= 5; i++){
Console.Beep();
Thread.Sleep(1000);
goto a;
while (true);
private static void BootUserInterface() {
Thread t = new Thread(UserInterfaceThread);
t.IsBackground = true;
t.SetApartmentState(ApartmentState.STA);
t.Start();
private static void UserInterfaceThread(object arg) {
Form1 frm = new Form1(); // use your own
Application.Run(frm);
Hi
Jalil Cracker,
>>when user pres n then it must go to a form but error arises and not working good and threading is not respondin
Could you post the error information? And which line caused this error？
If you want to show Form1, you can use form.show() method
Form1 frm = new Form1();
frm.Show();
In addition, Cosmos is an acronym for C# Open Source Managed Operating System. This is not Microsoft product.If the issue is related to Cosmos, it would be out of our support. Thanks for your understanding. And you need raise an issue at Cosmos site.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I was installing the ios 6 on my iphone 3GS and an error occured and since then it's hanged up and not working. Please suggest some solution
the same thing here! each time its suppose to register with my network, it cant. im wondering if its a hardware problem
-
Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?
It seems there's a workaround here:
https://discussions.apple.com/thread/5566037?tstart=0 -
In Flex application functionality is working sometimes and not working sometimes..
Hi,
Please help me on this..
In my flex application some functionality is working some times and not working sometimes..
In my project i have 5 sections with 5 separate screens..Each screen is of one diffeent module.
After logining into the application:
I will go to one screen..First time every functionality is working in that screen..
Ex:: I have a screen with datagrid.From that user will select one job name from datagrid click on next button..
Based the job name the user selected i have to display some information in next screen and customer names.customer names is a combo box..
below is the code:::
public function populateAllOEMCustomers(event:ResultEvent):void
1) var object_CustomerList:CustomerList = event.result as CustomerList; //Assigining result object values to Object reference variable.
2) var allOEMCustomersCollection:ArrayCollection = new ArrayCollection(); //Declaration ArrayColliction referance variable.
3) var i:int=0;
4) var customerComboLabel:Label = new Label();
5) for (i = 0;i < object_CustomerList.arryCollCustName.length; i++)
var strCustName:String = object_CustomerList.arryCollCustName.getItemAt(i).toString();
var strCustId:String = object_CustomerList.arryCollCustId.getItemAt(i).toString();
customerComboLabel = new Label(); //Dynamic declaration of label.
customerComboLabel.name = strCustName; //Assinging the customer name to the Label name field.
customerComboLabel.text = strCustId; //Assingning the customer id to the Label text field.
allOEMCustomersCollection.addItem(customerComboLabel); //Adding Lable into the ArrayCollection referace variable.
//customerComboID.selectedItem = "--";
OEMCustomersComboID.dataProvider = allOEMCustomersCollection;
OEMCustomersComboID.selectedItem = -1;
This functionality is working fine when i visit to this screen first time..If you go back to another screen and come back to this same screen and click on next button this time customer names combo box has no customer details..I am getting Nullpointer Exception and it is showing the line number 5( i have given the number for code given above..)
If i change the first line of the code to below code:: every time the above functionality is working fine.Not getting any error msg..
var object_CustomerList:Object= event.result ;
If i type cast it to specific class(CustomerList) ,functionality is not working ..getting null pointer exception..If i type cast it to Object everything is working fine..In my code wherever i have typecasted it to specific class functionality is not working(gettingNullpointerExcepion).
Please help me on this..I am not getting what could be the reason..
I am using::Flex 3,Flash player 10.1
Thanks in advance..
Regards,
SatyaHi Satya,
This sometimes as in your case might not work as the way you have specified the RemoteClass attribute in your AS class. As somtimes there may be a case as before it is mapped to a server side you are returned the data and so that you may not get the data as your Custom class but as normal Object type.
So in order to avoid this you can map the server side class to AS classes in the PreInitialize handler itself as shown below:
Specify the preinitializeHandler in your main application and write the below function.This way also you can map AS classes with the server side. So that you will not have any problem referring your application as AS class types.
You can use the same line for registering all the classes. By using this you can remove all the [RemoteClass] attributes on all AS classes and include it at single place.
preinitialize="onPreinitialize()"
private function onPreinitialize():void
registerClassAlias("com.expeditor.ScriptAdmin.Objects.CustomerList", CustomerList);
Here in the above line of code the string in quotes refer to the namespace of the Server side class and the latter is your AS class. Also dont forget to import the namespace of the corresponding AS class in the file.
Try this and let me know..
Thanks,
Bhasker -
My ipad 2 died. It is not charging and not working. Help?
My ipad 2 has suddenly died. It is not charging and not working. It is under the one year warranty. Does anybody have experienced such problem?
If you are stuck with the Apple logo then the last section on this page http://support.apple.com/kb/TS3281 suggests putting the iPad into recovery mode http://support.apple.com/kb/HT4097 (which so far I havn't need to do with mine)
-
I want to hand on my water damaged and not working iPhone are the notes that were on the handset accessible to anyone who can get the handset working again?
It's possible, I suppose. Unlikely, but possible. Someone would have to be extremely driven to fix your broken phone specifically to look at your notes though.
-
Program only coverted half my PDF and not working, Please refund me
Program only coverted half my PDF and not working, Please refund me
Hi,
I am sorry that it did not work for you.
May i know is this happening with all files?
Would it be possible for you to send me the document so that i can check what is the actual issue.?
Regards,
Florence -
Can't sync ical on my iphone and imac. email and note work but not ical. can anyone help.
can't sync ical on my iphone and imac. email and note work but not ical. can anyone help.
thanks
bmoreimacSo how can i make it work that way, i asked one of my friends, and she says it works like that...when she delete the email on her iphone it is deleted on the mac too, what do i do to change this?....my mail it's hotmail, i don't know if its relevant
Maybe you are looking for
-
First I have Mac OSX 10.6.8 I photo 8.1.2 All of a sudden when I attempt to download a photo from Iphoto to an email attachment or to facebook, I get a message that says I need to : "open Iphoto 5 or later to see photos from your Iphoto library in th
-
Monitor Calibration & Use Of Smart Fix In PSE 10
Hi, I have a couple of questions about using PSE 10. First, I have an Iiyama ProLite E2409HDS monitor and it has a setting to put it into sRGB mode which I have read is better for viewing/editing photos. I use my computer for lots of different things
-
Portlet-to-Portlet communication BEA Weblogic Portal 7.0 SP2 Windows environment
I am new to BEA Weblogic Portal. I have a page with 3 portlets. Portlet 1 searches and displays data in portlet 2. When you click on a specific link in portlet 2 it displays detailed data in portlet 3. This all works fine. My Problem is when I execut
-
Color correction - matching color from two captures?
Hi, Shooting inside the same room with the same light, I seem to have got the walls a little more yellow in one of my takes. There is a subject (blue shirt) and a mechanical system (painted blue) with the background an off white paint on a block wall
-
Forms9i crash when LOADING a form
Hello, I'm doing a migration from Forms 6i to Oracle9i Forms. I've been doing this for the past few days with little or no problems, but today I ran into a form that makes Forms Builder (9i) simply crash. Whenever I try to load this form I get a mess