X11 6.6.2 Xsun patch incompatible with imaging applications - Solaris 10

Hello,
I am running Sol 10 11/06 on a Sun Blade (64-bit). After installing patch 119059-27, an imaging application that is vital to my workflow will no longer run. I get a Segmentation Fault.
The application is ENVI Freelook, and is available for free at:
http://rsinc.com/download/download.asp?searchstring=FreeLook&ProductVersion=All+Products
Neither the 64- or 32-bit Sparc versions of Freelook will now work. After removing the patch, reverting to patch level 119059-25, Freelook will work again. If Freelook doesn't run, it is probable that the IDL, a high-level programming language, and ENVI, a popular imaging application written in IDL, also will not work with the new Xsun patch. This is not good.
Is there a workaround for this problem? Or shall I just wait for the next version, hoping that the problem won't recur? Is this the right forum to post this problem?

This isn't the right forum because this forum is only for problems with the patching toolset, and not for problems with patches themselves. The Solaris forum might be able to help with this one.

Similar Messages

  • BIB-16633 Cannot connect because the database version is incompatible with

    BIB-16633 Cannot connect because the database version is incompatible with Feb 15, 2005 9:28 PM
    Reply
    why is this?
    oracle.dss.connection.common.ConnectionException: BIB-16633 Cannot connect because the database version is incompatible with this BI Beans version.
    at oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(MDMConnectionDriverImpl.java:147)
    at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
    at oracle.dss.connection.client.Connection.connect(Connection.java:425)
    at oracle.dss.connection.client.Connection.connect(Connection.java:342)
    at oracle.dss.addins.designer.OLAPSource.test(OLAPSource.java:284)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel.testConnection(OlapPanel.java:244)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel.btnTest_actionPerformed(OlapPanel.java:378)
    at oracle.dss.addins.wizard.configFileEditor.OlapPanel$3.actionPerformed(OlapPanel.java:120)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
    at java.awt.Dialog$1.run(Dialog.java:540)
    at java.awt.Dialog.show(Dialog.java:561)
    at java.awt.Component.show(Component.java:1133)
    at java.awt.Component.setVisible(Component.java:1088)
    at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
    at oracle.dss.addins.wizard.configFileEditor.ConfigFileEditorWizard.run(ConfigFileEditorWizard.java:229)
    at oracle.dss.addins.designer.BIDesignerImpl.editConfigFile(BIDesignerImpl.java:1428)
    at oracle.dss.addins.designer.BIDesignerAddin.openBIDesignerSettings(BIDesignerAddin.java:990)
    at oracle.dss.addins.designer.BIDesignerAddin.actionPerformed(BIDesignerAddin.java:807)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
    at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
    at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
    at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Lisa Sherriff
    Posts: 137
    OTN Member Since: Jan, 2001
    Re: BIB-16633 Cannot connect because the database version is incompatible w ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 16, 2005 1:32 AM
    Reply
    Hi,
    From the 10.1.2 BI Beans Install Guide it says:
    OracleBI Beans supports data stored in Oracle9i Enterprise Edition or Oracle Database 10g Enterprise Edition. However, only particular releases and patchsets are supported:
    * Oracle9i Release 2 Enterprise Edition, as follows:
    o 9.2.0.6 for all platforms.
    o 9.2.0.5 with the latest OLAP patch for Windows-only.
    * Oracle Database 10g Release 1 Enterprise Edition with the latest OLAP patch.
    From the error message it would appear that the Database is not one of the above.
    Thanks,
    Lisa
    JDev QA
    401488
    Posts: 48
    OTN Member Since: Aug, 2002
    Re: BIB-16633 Cannot connect because the database version is incompatible with ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 18, 2005 8:01 PM
    Reply
    Hi,
    Please note that we have follwing versions of DB up and running:-
    1)Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    2)Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
    With the Partitioning and Real Application Clusters options
    JServer Release 9.2.0.5.0 - Production
    Pls let us know the solution to resolve this problem ASAP.
    Thanks.

    You are not using a supported version of the database. BI Beans/OLAP only support the following database versions:
    10g - 10.1.0.3 with additional OLAP patch
    9i - 9205 with additional OLAP patch
    9i - 9206
    I would suggest that you have not applied all the required database patches to your instance.
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oraclc Corporation

  • UDI-00018: Data Pump client is incompatible with database version 11.2.0.1

    Hi
    I am trying to import data in Oracle 11g Release2(11.2.0.1) using impdp utitlity and getting below errror
    UDI-00018: Data Pump client is incompatible with database version 11.2.0.1.0
    Export dump has taken in database with oracle 11g Release 1(11.1.0.7.0) and I am trying to import in higher version of the database. Is there any parameter I have to set to avoid this error?

    AUTHSTATE=compat
    A__z=! LOGNAME
    CLASSPATH=/app/oracle/11.2.0/jlib:.
    HOME=/home/oracle
    LANG=C
    LC__FASTMSG=true
    LD_LIBRARY_PATH=/app/oracle/11.2.0/lib:/app/oracle/11.2.0/network/lib:.
    LIBPATH=/app/oracle/11.2.0/JDK/JRE/BIN:/app/oracle/11.2.0/jdk/jre/bin/classic:/app/oracle/11.2.0/lib32
    LOCPATH=/usr/lib/nls/loc
    LOGIN=oracle
    LOGNAME=oracle
    MAIL=/usr/spool/mail/oracle
    MAILMSG=[YOU HAVE NEW MAIL]
    NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
    NLS_DATE_FORMAT=DD-MON-RRRR HH24:MI:SS
    ODMDIR=/etc/objrepos
    ORACLE_BASE=/app/oracle
    ORACLE_HOME=/app/oracle/11.2.0
    ORACLE_SID=AMT6
    ORACLE_TERM=xterm
    ORA_NLS33=/app/oracle/11.2.0/nls/data
    PATH=/app/oracle/11.2.0/bin:.:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/oracle/bin:/usr/bin/X11:/sbin:.:/usr/local/bin:/usr/ccs/bin
    PS1=nbsud01[$PWD]:($ORACLE_SID)>
    PWD=/nbsiar/nbimp
    SHELL=/usr/bin/ksh
    SHLIB_PATH=/app/oracle/11.2.0/lib:/usr/lib
    TERM=xterm
    TZ=Europe/London
    USER=oracle
    _=/usr/bin/env

  • PSE 9 incompatible with Windows 7 64 bit home premium?

    My PSE 9 just stopped working on WIndows 7. I have been using it without problem until I tried to run it tonight. It now simply does not run, no splash screen, nothing. I have tried an uninstall and reinstall without success. The last thing I remember installing was the October Microsoft patches was there sonething in that update that is incompatible with PSE9?

    As you are facing issue with Bluescreen, kindly update the windows and also update the Bios of your Notebook from the below mentioned web link.
    http://support.lenovo.com/en_US/downloads/default.​page?
    Now please check if the issue resolved.
    Regards,
    Sameer
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.  What do I need to do to make it work again?

    I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.  What do I need to do to make it work again?  Just a patch/update or do I need to uninstall and install?

    antoniobesteban wrote:
    I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.
    Where are you seeing that information? Got a link?
    According to the Adobe website: Mac OS X Mavericks (10.9) compatibility FAQs | CC, CS6, Acrobat
    Plenty of people, including me, are currently running CC on Mavericks.

  • PPro 1.5 incompatible with Windows 7

    I just upgraded laptops and have been eager to continue editing with Premiere Pro 1.5.  However, the program will not upload and gets stuck during the initialization process at GPUPagecurl.aex.  Is version 1.5 incompatible with Windows 7 and if so, is there a fix/patch?
    Laptop specs:  i7 chip  8G Ram  dual quad processor @1.6 Ghz  1.6 Ghz and 64bit OS

    Personal aside - I feel that the min. requirements are awfully low. They are basically enough to install the program, and launch it. Trying to edit anything with a min. system will be horribly painful, if even possible.
    It is good that you read of the min. system requirements. I would not attempt to go with something below those.
    Now, with about Photoshop CS, Adobe finally issued a min. video card statement for PS. It was 128MB VRAM min. I still ran PS CS for a few years on a Matrox G-450 64MB video card, without issues. Now, this is VASTLY different than CPU, RAM or HDD setup.
    Good luck, and thanks for reporting, even if it was not good news. That will very likely help others with the same question.
    Hunt

  • Firefox 15 incompatible with HP Smart Web Printing 4.60 , also DigitalPersona 5.0.0.4375

    Win7 64-bit
    HP Officejet Pro 8500 A909g
    Firefox 15.01
    Firefox, during installation, reports that two of my TM-2 2100's sotware features are "incompatible with Firefox 15.01"
    They are:
    HP Smart Web Printing 4.60
    and
    DigitalPersona Extension 5.0.0.4375
    Did I miss a printer update or is/will there be a patch? Thanks!

    Smart Web Printing has been replaced with HP Smart Print.  For more information on that, please click here. It will tell you about upgrading to Smart Print and the differences between them.  It will also walk you thru uninstalling the Smart Web printing and upgrading to HP Smart Print.   Smart Print only Works with Internet Explorer versions 6-9. At this time, as of today there has not been any information on if an when a version will be made available for Fire Fox.  I hope this helps. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Tags Plugin Incompatible With Shuttle Item

    I installed the Learning Library (http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/apex/r41/inst_pkgapp/inst_pkgapp.htm) and found that the Tag plugin is incompatible with the Shuttle Item. Page 17 contains both and the shuttle item does not function. It will not shuttle any items. If I remove disable the Tags item (which is of Tags Plugin type) the shuttle works as expected. I looked around for information on this plugin but did not locate it on http://www.apex-plugin.com/search-plugin-directory. I'd like to keep if but I definitely need the shuttle item working so I may just go with a text item for the Tags field.
    Any ideas?
    Thanks,
    Jason

    This error should only appear when you use a list-item with the list-type set to combobox. A combobox in forms is a listitem where you can also enter your own text. If you nly need a dropdown list, set the liststyle to poplist. This works also without patching. if you really need the combobox, patch.

  • ThinkVantage Password Manager incompatible with Firefox 7.0.1

    I've updated my Firefox to 7.0.1 and have noted the greyed out message within the FFox add-ons that the ThinkVantage Password Manager is incompatible with Firefox 7.0.1   I have search for a fix or patch from Lenovo that address this issue with this version of FFox  but have not found any solutions. Does anyone have an ear to a possible solution? Thanks!
    Moderator edit: Removed javascript from post.

    Hi,
     There is a patch for FF support.
     Please check  the link below,
    http://forums.lenovo.com/t5/ThinkVantage-Technologies/Password-Manager-compatibility-issue-with-Fire...
    If you are using FF8.0 and it is not working after the patch is installed.
    To the following steps:
     Disable password manager extension from FF,
     And find the file "tvtpwm_jstypes.xpi" and drag it into FF to reinstall the extension.
     This file is usually in folder, "c:\swtools\css83_firefox5_patch"

  • Firefox 10.0 says it's incompatible with Norton Toolbar and Norton Identity Safe. We recently had this with upgrade to Firefox 9.0. Can the update Norton provided for Firefox 9.0 be incorporated in 10.0?

    Firefox 10.0 says it's incompatible with Norton Toolbar and Norton 360 Identity Safe. We recently had this with upgrade to Firefox 9.0. Can the update/workaround Norton provided for Firefox 9.0. somehow be incorporated in 10.0?

    No, it's still in version 5.2.0.13, but the update/patch sent resolved the problem!

  • SOURCE_PACKAGE is INCOMPATIBLE with the FORMAL PARAMETER DATA_PACKAGE

    Hello Experts,
    Infocube A is getting updated from shopping carts DSO. I have added 3 new fields in SC DSO then cube transformations got inactive.  I do not want 3 new fields in cube. we have report on DSO. Below is syntax error when  checking transformations.
    Error: In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
    3 New fields are available in tys_SC_1 but not available in tys_SC_1_full. I tried to insert 3 fields in tys_SC_1_full but still it is showing same syntax error.  And more TYPE is availalbe tys_TG_1_full.  This type does not have 3 fields.
    Please  advice.
    Thanks in advance.
    Regards
    Venkata.

    Hello Rathy,
    I have resolved issue by addinng fields to data package. Issue is becasue of 4 fields in source and I have added only 3 fields in data package. Added one more field to data package and no syntax errors when checked.
    Thanks for the input and points assigned.
    Regards
    Venkata Agraharam.

  • I just updated to 10.9.3. I now cannot open Mail - it comes up with an error window and suggests it may be incompatible with this OS. What is the fix for this? Thanks

    When I try to open Mail from the launchbar it won't open and comes up with a window saying it may be incompatible with this version of OS X.
    What is the answer to fix this?!

    Backup for safety on at least two reliable drives.
    Reinstall using the combo update at http://support.apple.com/kb/DL1746
    You would be wise to quit all apps, disconnect all peripherals and preferably delete all email accounts before upgrading.

  • K7N2 Delta (ILSR) incompatible with 200FSB?

    Is the K7N2 Delta (Nforce2 Chipset) incompatible with 200FSB??... Ive seen many problems when trying to upgrade the CPU, and use a 200FSB in various forums. So, why does it keep hanging/crashing?? Might it be not really supported even though it specify it does?

    From most of the posts I've been reading about this issue, the users are trying to build their systems using Value RAM from various manufacturers such as Kingston or Corsair among others...this just isn't a reality anymore in the high speed world of components...the Delta boards require a lot of power and high speed memory nowadays and a lot of the users are just unaware of these facts...
    Part time builders are the most susceptible to this as they build a system every few years and think that all of the 'old' rules apply to their situation...what 'should' be isn't anymore as we continue to design and produce faster products that require faster peripherals to support them...
    Getting away cheaply has been designed out of most systems and this really stems from the CPU mfg's and how MB designers have to approach BUS speeds and the like...
    CDM has it right that you need to dip a little deeper these days for good QUALITY memory and peripheral items to ENSURE that when you build your new PC that you minimize these issues from the get go...if not then you're going to have a good run at testing this RAM or that RAM to find one that is cheap and will still have the speed capability to keep up with your high end MB & components...
    Apacer is a good example of this...they're moderately priced and they perform very well in the sandbox with most applications that you set before them...overclocking them can lead you down a problematic path but overall they're pretty flexible from what I've seen...
    Most of us here know that Mushkin is pretty infallable and will take pretty much whatever is thrown at their modules...if not calling their CS dept gets you the kind of help that most companies only dream about providing...
    All in all the 'line' has risen and it will rise again and you'll see a rash of users that will complain that "This should do what I want it to do" but as is most always the case, you'll find that they're trying to build an underpowered system that requires fast peripheral components and a lot of them just aren't willing to dish out the cash required for a great white box system...
    Yes I agree that it's a scam from the companies to force us to spend more of our hard earned dollars but that is the way of the world now, albeit that it's unfortunate...if you're really good at building systems tho, you'll find that you can usually come up with a pretty mid-range priced system that will blaze thru all the latest games but that only comes with buying components to play trial & error with...much like I used to do in my Computer Store years ago...these days I don't do much of that, I just buy the good stuff and save my time...

  • Witch laptops are compatible/incompatible with windows XP/VISTA

    Hi so i am planning on buying Apple MacBook or maybe PRO
    i have a list of laptops that are served in our area:
    Apple MacBook Pro MA895
    Apple MacBook Pro MA610
    Apple MacBook Pro MA611
    Apple MacBook Pro MA897
    Apple MacBook MB062
    Apple MacBook MB063
    and i need to know wich one of those are compatible or incompatible with Windows XP? please make a quick response
    In advance thank you for your time

    All of the "MacBook" laptops are compatible with XP/Vista.
    One thing to note is that BootCamp is currently in the beta version (at least until when OS X Leopard comes out), so you may have some minor problems installing and running windows, but they should be fine.
    Another thing to note is since Vista craves a lot of CPU, RAM, HD and graphics, I would suggest you going to a MacBook Pro. I have heard that Vista does not run smoothly on computers with less than 2 GB RAM, nor does all of its features render well if you don't have a 128 MB graphics card. Increasing the MacBook's RAM to 2 GB may also significantly increase the performance.
    Either way, the option is yours. All of them should work out fine, with perhaps a couple of firmware updates

  • Subroutine-the actual parameter is incompatible with the formal parameter

    Hi,
    I have the following code that is outputting an error message during activation:
    DATA: I_RESBB TYPE TABLE OF RESBB,
          WA_RESBB TYPE RESBB.
    PERFORM OBTAIN_RESBB_DATA
    USING I_RESBB.
    *&      Form  OBTAIN_RESBB_DATA
    *       text
    *      -->P_I_RESBB  text
    FORM OBTAIN_RESBB_DATA  USING    VALUE(P_I_RESBB) TYPE RESBB.
    ENDFORM.                    " OBTAIN_RESBB_DATA
    However, I am getting the following messages during activation:
    In PERFORM or CALL FUNCTION "OBTAIN_RESBB_DATA", the actual parameter
    "I_RESBB" is incompatible with the formal parameter "P_I_RESBB".
    What am I doing wrong? I have checked through many different threads & sites but can't find a solution.
    Thanks,
    John

    John, since you seem quite familiar with the ABAP help and obsolete statements I'm now surprised what you were initially asking for.. .
    Anyhow, below a sample coding with the table being passed as a USING parameter. Avoid using VALUE on the parameter (i.e. pass by value) unless you need a copy of the parameter. Otherwise this leads to a performance overhead (requirement to copy the parameter), especially for large internal tables.
    TYPES T_RESBB_TAB TYPE STANDARD TABLE OF RESBB WITH NON-UNIQUE DEFAULT KEY.
    DATA I_RESBB TYPE T_RESBB_TAB.
    PERFORM OBTAIN_RESBB_DATA USING I_RESBB.
    FORM OBTAIN_RESBB_DATA  USING I_RESBB TYPE T_RESBB_TAB.
      FIELD-SYMBOLS: <RESBB> TYPE LINE OF T_RESBB_TAB.
      LOOP AT I_RESBB ASSIGNING <RESBB>.
        " Additional coding for evaluating/updating the table
      ENDLOOP.
    ENDFORM.
    Cheers, harald
    P.S.: Update of my posting: Just read your one comment. Looks like your only problem was attempting to define the table type in the parameters section of the form routine. This doesn't work. If you don't have a type you could use a generic type (i.e. simply just say <i>using i_resbb type table</i>), but in general I would stick to strong typing unless you have a generic routine that must handle different table types. So simply refer to a table type from dictionary or that you defined in your program.

Maybe you are looking for