X11 And GIMP

I downloaded GIMP and it saying that I need to install X11 from my OSX install disc. Well I tried installing it and it says that it is already installed with a new version and when i try to open GIMP it says to turn on X11. Any ideas how to help?

You need to go to the Optional Installs section of your install disk. If you downloaded X11 that version will not work. If X11 has been successfully installed it will appear in your Utilities folder. The first time you launch GIMP it may not finish starting up--I quit it, launched it again then waited patiently and it finally successfully started. All subsequent starts are normal.
Francine
Francine
Schwieder

Similar Messages

  • Using x11 and Gimp

    I started to download Gimp and was given a message that I needed to install x11. I have a MacBook Pro with v 10.4.11. When I tried to install x11 a message popped up that I had a newer version on my computer. What version do I need to install and how do I go about it to get Gimp to work?
    Thank you for any help
    Mark

    Sorry to digress from the OP question...
    johan63 wrote:
    But only the newest developer version of X11 seems to work with tablets and Gimp. And that version is only for the very newest update of Leopard. Anyone know if there will be a X11 compatible with OSX 10.4 regarding the tablet functionality?...
    Well, that is not entirely correct. I am using a Graphire4 Wacom tablet and the basic mouse/pen functionality works in X11 (GIMP, GIMPshop) for pointing, clicking, drawing, etc. The main (essential) feature that is not supported in 10.4.11 version of X11 is pressure sensitivity. There are some linux drivers that support pressure sensitivity, but I think the X11 version in 10.4 still won't support it. (You might be able to find some open-source version of X11 as an alternative and compile and build it yourself if you are a developer) If anyone is aware of an update to X11 available for 10.4 that works with pressure sensitivity, please correct me if I am wrong. (Of course the pressure sensitivity works with the bundled tablet software Photoshop Elements and Corel Painter Essentials, so you can always make some layers/masks with the pen tablet using that software and then export those to your GIMP project to add more effects or to the use the tools that are missing from the bundled software)
    Has pressure sensitivity support been introduced to X11 in 10.5, or is that still in development?

  • X11 and Gimp won't start

    Hello all.
    First of all, sorry if this is in the wrong section, I wasn't quite sure where to post this, seeing as X11, which i'm having problems with is a utility, I thought this might be the right place to post (it says about 'utilities' in the forum descriptions afterall).
    Anyway, I seem to be having a problem with the X11 utility, which I installed off of the OS X DVD (from the 'optional installs' package), and a problem with The Gimp, both of which i think are probably related.
    Well I installed The Gimp a while ago, aswell as the X11 program, and both worked fine (you probably already know that The Gimp needs X11 to run). But at some point, it suddenly stopped working. I think it may have been after an update, but I really can't remember.
    The problem I was having with The Gimp is that it would go to start up, but just after the X11 icon appeared in the dock, the cursor would change to an X for a few seconds. The splash screen would come up, but it didn't even appear to have a background or progress bar or anything, and didn't do anything.
    At that point, just running X11 on it's own, or OpenOffice.org worked fine.
    Well recently, i've tried to run The Gimp again, and something different happens. The X11 icon comes up and starts bouncing in the dock, but after a few seconds, it closes again, and The Gimp tells me that it needs X11 to run (which I already have of course).
    When I try to run X11 on it's own, the same thing happens. The icon comes up in the dock, starts bouncing, then goes again.
    I've used the Console program in the Utilities folder, and both times, for both problems (when The Gimp had the funny splash screen and wouldn't start, when it wouldn't start up at all, and when X11 wouldn't start), I get the same few lines which might help, these are below:
    XFree86 Version 4.4.0 / X Window System
    (protocol Version 11, revision 0, vendor release 6600)
    _XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root
    [DRI] screen 0 installation complete
    Screen 0 added: 1280x1024 @ (0,0)
    Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
    Quitting XDarwin...
    So now, I have The Gimp that doesn't work, X11 that doesn't work, and OpenOffice.org doesn't work either (same problem where X11 quits), which is rather annoying, since I could do with using The Gimp.
    I hope that explains my problem a bit, and I hope someone can help me sort it out. Thanks in advance for any help
    Mac Mini   Mac OS X (10.4.3)   1.33 GHz Power PC G4, 512 MB RAM, 40 GB HD
    Mac Mini   Mac OS X (10.4.3)  

    For the problem with /tmp you might see if there is any useful information in this discussion. I've seen a couple of other people with a problem involving /usr/X11R6/lib/X11/fonts/CID. Don't know what the scoop is on that. The directory is supposed to have two files: fonts.dir and fonts.scale. If you have the CID directory and it has the required files I'm afraid I don't know what else would need to be done, although running Repair Permissions from Disk Utility is something you might try. It doesn't hurt, might help, and shouldn't take too long. You might also try posting your problem in the UNIX discussions. You're more likely to attract the attention of people familiar with X11 problems and solutions in that forum.
    Francine
    Schwieder

  • I know this has been answered but... X11 and Gimp

    I have read all the advice about reinstalling X11 from the Snow Leopard disk and then doing an Update from Apple.
    Recently my hard drive was replaced at the Apple Store and I have had to reinstall all my software but Open Source software like GIMP and INKSCAPE didn't work. SO I religiously read all the docs about this problem and religiously did the stuff above.
    Yes I have X11 reinstalled and updated but Gimp and Inkscape STILL do not work - they load but no fonts or anything else does and they just sit there doing nothing no access.
    Any ideas - I have taken them off and reinstalled. This has only happened since the new hard drive - everything else is fine but this is very frustrating and I can't work on graphics with these progs now.
    Please could some kind person advise another strategy I'm pulling my hair out this end?

    I updated this morning and x11 no longer starts. I am now running 10.6.8.  The dump from x11 starting
    and crashing is below.  Looks like a library version problem.
    Process:         X11.bin [674]
    Path:            /Applications/Utilities/X11.app/Contents/MacOS/X11
    Identifier:      org.x.X11
    Version:         ??? (???)
    Build Info:      X11server-850300~2
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [192]
    Date/Time:       2011-10-19 08:30:16.502 -0700
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          566289 sec
    Crashes Since Last Report:           6
    Per-App Crashes Since Last Report:   6
    Anonymous UUID:                      0108C5BC-F883-4756-BD87-EEB33B514D4A
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /usr/X11/lib/libfreetype.6.dylib
      Referenced from: /usr/X11/lib/libXfont.1.dylib
      Reason: Incompatible library version: libXfont.1.dylib requires version 13.0.0 or later, but libfreetype.6.dylib provides version 10.0.0
    Binary Images:
        0x7fff5fc00000 -     0x7fff5fc3bdef  dyld 132.1 (???) <B536F2F1-9DF1-3B6C-1C2C-9075EA219A06> /usr/lib/dyld
    Model: MacBookPro6,1, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.53 GHz, 4 GB, SMC 1.57f16
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS23N
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB Storage, 0x05e3  (Genesys Logic, Inc.), 0x0715, 0xfa130000 / 6
    USB Device: FreeAgent GoFlex, 0x0bc2  (Seagate LLC), 0x5021, 0xfa140000 / 5
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0236, 0xfa120000 / 4
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 3
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8218, 0xfa113000 / 7
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Hub, 0x05ac  (Apple Inc.), 0x9126, 0xfd130000 / 5
    USB Device: i860, 0x04a9  (Canon Inc.), 0x107f, 0xfd132000 / 10
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0608, 0xfd133000 / 9
    USB Device: Combo Free KVM, 0x10d5  (Uni Class Technology Co., Ltd.), 0x5000, 0xfd133100 / 12
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0xfd133200 / 11
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0xfd133220 / 13
    USB Device: Display Audio, 0x05ac  (Apple Inc.), 0x1105, 0xfd134000 / 8
    USB Device: Apple LED Cinema Display, 0x05ac  (Apple Inc.), 0x9226, 0xfd136000 / 7
    USB Device: Display iSight, 0x05ac  (Apple Inc.), 0x8508, 0xfd135000 / 6
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0xfd110000 / 3

  • I downloaded gimp+x11 and message says can't uninstall -help please

    I downloaded gimp with X11 and want to uninstall it but an icon of a hard drive is in my sidebar under my mac hard drive icon  with  gimp X11 on it   and when I tried to drag it to the trash, a message popped up saying "can't = put it in trash because gimp cannot be uninstalled" . Please help me. I have an older version of adobe creative suite but wanted a simpler paint program to merge art and photos. I desperately want to uninstall gimp because it is not even as good as Tuxpaint which my granddaughter uses at school and which I realized has options of photo merging also and seems like a better designed program even if it is for kids. The only problem with Tuxpaint is enlarging its canvas or workspace window and I haven't yet found how to export it's images but my granddaughter loves it and will flip when she realizes she can load photos from her digital camera, I hope. My main problem though is getting rid of gimp.  Thank you for your help.

    It sounds like you have a disk image mounted. If that's so, unmount it by clicking the eject icon that appears when you mouse over it in the Finder sidebar, then move the image file (something like "Gimp.dmg") to the Trash.

  • [SOLVED] Xorg crashes when I open OpenOffice and Gimp

    Hello. I recently did a system upgrade, and then I tried unsuccessfully to install the printer drivers with hplip. the fact is that after these two steps (don't know what the cause of the two, but then I have removed hplip the dependencies) when I open OpenOffice (or LibreOffice, even doing the downgrade to OOo 3.2.1 does not start right) and Gimp Xorg crashes, and pixels are mixed, making the system unusable (i have to give ctrl-alt-canc). This is pacman.log of the last days:
    [2011-02-04 20:01] Running 'pacman -Syu'
    [2011-02-04 20:01] synchronizing package lists
    [2011-02-04 20:01] starting full system upgrade
    [2011-02-04 20:02] Running 'pacman -R slim'
    [2011-02-04 20:02] removed slim (1.3.2-1)
    [2011-02-04 20:02] Running 'pacman -Su'
    [2011-02-04 20:02] starting full system upgrade
    [2011-02-04 20:08] upgraded libdrm (2.4.22-3 -> 2.4.23-1)
    [2011-02-04 20:08] upgraded libgl (7.9.0.git20101207-2 -> 7.10-1)
    [2011-02-04 20:08] upgraded ati-dri (7.9.0.git20101207-2 -> 7.10-1)
    [2011-02-04 20:08] upgraded babl (0.1.2-1 -> 0.1.4-1)
    [2011-02-04 20:08] upgraded consolekit (0.4.3-1 -> 0.4.3-2)
    [2011-02-04 20:08] upgraded device-mapper (2.02.81-1 -> 2.02.82-2)
    [2011-02-04 20:08] upgraded dhcpcd (5.2.9-1 -> 5.2.10-1)
    [2011-02-04 20:08] upgraded ed (1.5-1 -> 1.5-2)
    [2011-02-04 20:08] upgraded gcc (4.5.2-5 -> 4.5.2-6)
    [2011-02-04 20:08] upgraded gcc-ada (4.5.2-5 -> 4.5.2-6)
    [2011-02-04 20:08] upgraded gcc-fortran (4.5.2-5 -> 4.5.2-6)
    [2011-02-04 20:08] upgraded gcc-libs (4.5.2-5 -> 4.5.2-6)
    [2011-02-04 20:08] upgraded gcc-objc (4.5.2-5 -> 4.5.2-6)
    [2011-02-04 20:08] upgraded gegl (0.1.2-1 -> 0.1.4-1)
    [2011-02-04 20:08] upgraded mesa (7.9.0.git20101207-2 -> 7.10-1)
    [2011-02-04 20:08] upgraded glew (1.5.7-2 -> 1.5.8-1)
    [2011-02-04 20:08] upgraded gmime (2.4.21-1 -> 2.4.22-1)
    [2011-02-04 20:08] upgraded gnome-panel (2.32.1-1 -> 2.32.1-2)
    [2011-02-04 20:08] upgraded gnome-panel-bonobo (2.32.1-1 -> 2.32.1-2)
    [2011-02-04 20:08] upgraded hunspell (1.2.14-2 -> 1.2.15-1)
    [2011-02-04 20:08] upgraded ifenslave (1.1.0-5 -> 1.1.0-6)
    [2011-02-04 20:08] upgraded linux-atm (2.5.1-1 -> 2.5.1-2)
    [2011-02-04 20:08] upgraded iproute2 (2.6.35-4 -> 2.6.37-1)
    [2011-02-04 20:08] upgraded iputils (20100214-2 -> 20101006-1)
    [2011-02-04 20:08] upgraded linux-firmware (20101108-1 -> 20110201-1)
    [2011-02-04 20:08] upgraded mkinitcpio (0.6.7-1 -> 0.6.8-1)
    [2011-02-04 20:08] >>>
    [2011-02-04 20:08] >>> If you use the LILO bootloader, you should run 'lilo' before rebooting.
    [2011-02-04 20:08] >>>
    [2011-02-04 20:08] >>> Updating module dependencies. Please wait ...
    [2011-02-04 20:08] >>> MKINITCPIO SETUP
    [2011-02-04 20:08] >>> ----------------
    [2011-02-04 20:08] >>> If you use LVM2, Encrypted root or software RAID,
    [2011-02-04 20:08] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2011-02-04 20:08] >>> More information about mkinitcpio setup can be found here:
    [2011-02-04 20:08] >>> [url]http://wiki.archlinux.org/index.php/Mkinitcpio[/url]
    [2011-02-04 20:08]
    [2011-02-04 20:08] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2011-02-04 20:08] ==> Building image "default"
    [2011-02-04 20:08] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2011-02-04 20:08] :: Begin build
    [2011-02-04 20:08] :: Parsing hook [base]
    [2011-02-04 20:08] :: Parsing hook [udev]
    [2011-02-04 20:08] :: Parsing hook [keymap]
    [2011-02-04 20:08] :: Parsing hook [autodetect]
    [2011-02-04 20:08] :: Parsing hook [pata]
    [2011-02-04 20:08] :: Parsing hook [scsi]
    [2011-02-04 20:08] :: Parsing hook [sata]
    [2011-02-04 20:08] :: Parsing hook [usbinput]
    [2011-02-04 20:08] :: Parsing hook [filesystems]
    [2011-02-04 20:08] :: Generating module dependencies
    [2011-02-04 20:08] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2011-02-04 20:08] ==> SUCCESS
    [2011-02-04 20:08] ==> Building image "fallback"
    [2011-02-04 20:08] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2011-02-04 20:08] :: Begin build
    [2011-02-04 20:08] :: Parsing hook [base]
    [2011-02-04 20:08] :: Parsing hook [udev]
    [2011-02-04 20:08] :: Parsing hook [keymap]
    [2011-02-04 20:08] :: Parsing hook [pata]
    [2011-02-04 20:09] :: Parsing hook [scsi]
    [2011-02-04 20:09] :: Parsing hook [sata]
    [2011-02-04 20:09] :: Parsing hook [usbinput]
    [2011-02-04 20:09] :: Parsing hook [filesystems]
    [2011-02-04 20:09] :: Generating module dependencies
    [2011-02-04 20:09] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2011-02-04 20:09] ==> SUCCESS
    [2011-02-04 20:09] upgraded kernel26 (2.6.36.3-2 -> 2.6.37-5)
    [2011-02-04 20:09] upgraded kernel26-docs (2.6.36.3-2 -> 2.6.37-5)
    [2011-02-04 20:10] upgraded kernel26-headers (2.6.36.3-2 -> 2.6.37-5)
    [2011-02-04 20:10] upgraded kernel26-manpages (2.6.36-1 -> 2.6.37-1)
    [2011-02-04 20:10] upgraded libcap (2.19-2 -> 2.20-1)
    [2011-02-04 20:10] upgraded libebml (1.0.0-1 -> 1.2.0-1)
    [2011-02-04 20:10] upgraded libgee (0.6.0-1 -> 0.6.1-1)
    [2011-02-04 20:10] upgraded libgnomecanvas (2.30.2-1 -> 2.30.3-1)
    [2011-02-04 20:10] upgraded libmatroska (1.0.0-1 -> 1.1.0-1)
    [2011-02-04 20:10] upgraded libva (1.0.6-1 -> 1.0.8-1)
    [2011-02-04 20:10] upgraded lvm2 (2.02.81-1 -> 2.02.82-2)
    [2011-02-04 20:10] module configuration already contains alias directive
    [2011-02-04 20:10]
    [2011-02-04 20:10] upgraded ndiswrapper (1.56-6 -> 1.56-7)
    [2011-02-04 20:10] upgraded nilfs-utils (2.0.20-1 -> 2.0.21-1)
    [2011-02-04 20:10] upgraded nspr (4.8.6-1 -> 4.8.7-1)
    [2011-02-04 20:10] upgraded pciutils (3.1.7-2 -> 3.1.7-3)
    [2011-02-04 20:10] upgraded python-gnomeapplet (2.32.0-3 -> 2.32.0-4)
    [2011-02-04 20:10] upgraded python-gnomedesktop (2.32.0-3 -> 2.32.0-4)
    [2011-02-04 20:10] upgraded python-gnomekeyring (2.32.0-3 -> 2.32.0-4)
    [2011-02-04 20:10] upgraded python-rsvg (2.32.0-3 -> 2.32.0-4)
    [2011-02-04 20:10] upgraded python-wnck (2.32.0-3 -> 2.32.0-4)
    [2011-02-04 20:10] upgraded rsync (3.0.7-1 -> 3.0.7-2)
    [2011-02-04 20:10] upgraded tiacx (20080210-18 -> 20080210-19)
    [2011-02-04 20:10] upgraded totem-plparser (2.32.1-1 -> 2.32.2-1)
    [2011-02-04 20:10] upgraded vlc (1.1.6-1 -> 1.1.7-2)
    [2011-02-04 20:10] upgraded whois (5.0.10-2 -> 5.0.11-1)
    [2011-02-04 20:10] upgraded xf86-video-ati (6.13.2-2 -> 6.14.0-1)
    [2011-02-04 20:10] upgraded xorg-server-common (1.9.2-2 -> 1.9.3.901-1)
    [2011-02-04 20:10] upgraded xorg-server (1.9.2-2 -> 1.9.3.901-1)
    [2011-02-04 20:10] upgraded xz (5.0.0-1 -> 5.0.1-1)
    [2011-02-04 20:16] Running 'pacman -S transmission'
    [2011-02-04 20:16] Running 'pacman -S transmission'
    [2011-02-04 20:18] Running 'pacman -S extra/transmission-gtk'
    [2011-02-04 20:18] installed transmission-gtk (2.13-1)
    [2011-02-05 23:06] Running 'pacman -S extra/hplip'
    [2011-02-05 23:08] installed foomatic-db (4.0.6_20101215-1)
    [2011-02-05 23:08] installed foomatic-filters (4.0.6_20101215-1)
    [2011-02-05 23:08] installed foomatic-db-engine (4.0.6_20101215-1)
    [2011-02-05 23:08] installed net-snmp (5.5-7)
    [2011-02-05 23:08]
    [2011-02-05 23:08] NOTE
    [2011-02-05 23:08] ----
    [2011-02-05 23:08] # If you want to use this driver with sane:
    [2011-02-05 23:08] # echo "hpaio" >> /etc/sane.d/dll.conf
    [2011-02-05 23:08]
    [2011-02-05 23:08] installed hplip (3.10.9-2)
    [2011-02-05 23:09] Running 'pacman -S cups'
    [2011-02-05 23:09] installed openslp (1.2.1-3)
    [2011-02-05 23:09] >> If you use an HTTPS connection to CUPS, the first time you access
    [2011-02-05 23:09] >> the interface it may take a very long time before the site comes up.
    [2011-02-05 23:09] >> This is because the first request triggers the generation of the CUPS
    [2011-02-05 23:09] >> SSL certificates which can be a very time-consuming job.
    [2011-02-05 23:09] installed cups (1.4.6-1)
    [2011-02-05 23:10] Running 'pacman -S dbus-python'
    [2011-02-05 23:10] upgraded dbus-python (0.83.1-2 -> 0.83.1-2)
    [2011-02-05 23:10] Running 'pacman -S sane'
    [2011-02-05 23:10] NOTE
    [2011-02-05 23:10] ----
    [2011-02-05 23:10] Add your user to group 'camera' to use camera devices.
    [2011-02-05 23:10] installed libgphoto2 (2.4.10.1-2)
    [2011-02-05 23:10] installed libieee1284 (0.2.11-3)
    [2011-02-05 23:10] NOTE
    [2011-02-05 23:10] ----
    [2011-02-05 23:10] Add your user to group 'scanner' to use scanner devices.
    [2011-02-05 23:10] installed sane (1.0.21-4)
    [2011-02-05 23:17] Running 'pacman -S hplip'
    [2011-02-05 23:17]
    [2011-02-05 23:17] NOTE
    [2011-02-05 23:17] ----
    [2011-02-05 23:17] # If you want to use this driver with sane:
    [2011-02-05 23:17] # echo "hpaio" >> /etc/sane.d/dll.conf
    [2011-02-05 23:17]
    [2011-02-05 23:17]
    [2011-02-05 23:17] UPGRADING
    [2011-02-05 23:17] ----
    [2011-02-05 23:17] # This version no longer uses an init script. You should remove hplip
    [2011-02-05 23:17] # from the /etc/rc.conf daemon list.
    [2011-02-05 23:17]
    [2011-02-05 23:17] upgraded hplip (3.10.9-2 -> 3.10.9-2)
    [2011-02-05 23:25] Running 'pacman -R hplip'
    [2011-02-05 23:25] removed hplip (3.10.9-2)
    [2011-02-05 23:25] Running 'pacman -S hplip'
    [2011-02-05 23:25]
    [2011-02-05 23:25] NOTE
    [2011-02-05 23:25] ----
    [2011-02-05 23:25] # If you want to use this driver with sane:
    [2011-02-05 23:25] # echo "hpaio" >> /etc/sane.d/dll.conf
    [2011-02-05 23:25]
    [2011-02-05 23:25] installed hplip (3.10.9-2)
    [2011-02-05 23:25] Running 'pacman -S rpcbind'
    [2011-02-05 23:25] upgraded rpcbind (0.2.0-3 -> 0.2.0-3)
    [2011-02-05 23:25] Running 'pacman -S python2-qt'
    [2011-02-05 23:26] installed python2-sip (4.12.1-1)
    [2011-02-05 23:26] installed python2-qt (4.8.3-1)
    [2011-02-05 23:26] Running 'pacman -S pygobject'
    [2011-02-05 23:26] upgraded pygobject (2.26.0-2 -> 2.26.0-2)
    [2011-02-05 23:37] Running 'pacman -S cups'
    [2011-02-05 23:37] upgraded cups (1.4.6-1 -> 1.4.6-1)
    [2011-02-05 23:37] Running 'pacman -R cups'
    [2011-02-05 23:37] removed cups (1.4.6-1)
    [2011-02-05 23:37] Running 'pacman -S cups'
    [2011-02-05 23:38] >> If you use an HTTPS connection to CUPS, the first time you access
    [2011-02-05 23:38] >> the interface it may take a very long time before the site comes up.
    [2011-02-05 23:38] >> This is because the first request triggers the generation of the CUPS
    [2011-02-05 23:38] >> SSL certificates which can be a very time-consuming job.
    [2011-02-05 23:38] installed cups (1.4.6-1)
    [2011-02-05 23:38] Running 'pacman -S php'
    [2011-02-05 23:38] installed php (5.3.5-1)
    [2011-02-06 10:42] Running 'pacman -Syu'
    [2011-02-06 10:42] synchronizing package lists
    [2011-02-06 10:43] starting full system upgrade
    [2011-02-06 10:44] upgraded desktop-file-utils (0.16-1 -> 0.18-1)
    [2011-02-06 10:44] upgraded gstreamer0.10 (0.10.31-1 -> 0.10.32-1)
    [2011-02-06 10:44] upgraded gstreamer0.10-base (0.10.31-1 -> 0.10.32-2)
    [2011-02-06 10:44] upgraded gstreamer0.10-bad (0.10.20-1 -> 0.10.21-1)
    [2011-02-06 10:44] upgraded libexif (0.6.19-1 -> 0.6.20-1)
    [2011-02-06 10:44] upgraded gstreamer0.10-bad-plugins (0.10.20-1 -> 0.10.21-1)
    [2011-02-06 10:44] upgraded gstreamer0.10-base-plugins (0.10.31-1 -> 0.10.32-2)
    [2011-02-06 10:44] upgraded gstreamer0.10-good (0.10.26-1 -> 0.10.27-1)
    [2011-02-06 10:44] upgraded gstreamer0.10-good-plugins (0.10.26-1 -> 0.10.27-1)
    [2011-02-06 10:44] upgraded gstreamer0.10-python (0.10.18-3 -> 0.10.21-1)
    [2011-02-06 10:44] upgraded gstreamer0.10-ugly (0.10.16-2 -> 0.10.17-1)
    [2011-02-06 10:44] upgraded gstreamer0.10-ugly-plugins (0.10.16-2 -> 0.10.17-1)
    [2011-02-06 10:44] upgraded libpciaccess (0.12.0-1 -> 0.12.1-1)
    [2011-02-06 10:44] upgraded libxi (1.4.0-1 -> 1.4.1-1)
    [2011-02-06 10:44] upgraded nfsidmap (0.23-4 -> 0.24-1)
    [2011-02-06 10:44] upgraded ntfs-3g (2010.10.2-1 -> 2011.1.15-1)
    [2011-02-06 10:44] upgraded openssh (5.7p1-2 -> 5.8p1-1)
    [2011-02-06 10:44] upgraded sg3_utils (1.29-1 -> 1.30-1)
    [2011-02-06 10:44] upgraded shared-mime-info (0.80-1 -> 0.90-1)
    [2011-02-06 10:44] upgraded sqlite3 (3.7.4-1 -> 3.7.5-1)
    [2011-02-06 10:44] upgraded xdg-utils (1.0.2.20100618-1 -> 1.1.0rc1-1)
    [2011-02-06 10:44] upgraded xorg-font-utils (7.5-2 -> 7.6-1)
    [2011-02-06 10:44] upgraded xorg-server-common (1.9.3.901-1 -> 1.9.4-1)
    [2011-02-06 10:44] upgraded xorg-server (1.9.3.901-1 -> 1.9.4-1)
    [2011-02-06 10:44] upgraded xorg-twm (1.0.4-3 -> 1.0.6-1)
    [2011-02-06 10:44] upgraded xorg-xrdb (1.0.7-1 -> 1.0.8-1)
    [2011-02-06 10:47] Running 'pacman -R openoffice'
    [2011-02-06 10:49] Running 'pacman -R openoffice-base'
    [2011-02-06 10:49] removed openoffice-base (3.3.0-1)
    [2011-02-06 10:49] Running 'pacman -S libreoffice'
    [2011-02-06 10:53] installed libwpd (0.9.0-1)
    [2011-02-06 10:53] installed ca-certificates-java (20100412-2)
    [2011-02-06 10:53] added certificate brasil.gov.br/brasil.gov.br.crt
    [2011-02-06 10:53] added certificate cacert.org/cacert.org.crt
    [2011-02-06 10:53] added certificate debconf.org/ca.crt
    [2011-02-06 10:53] added certificate gouv.fr/cert_igca_dsa.crt
    [2011-02-06 10:53] added certificate gouv.fr/cert_igca_rsa.crt
    [2011-02-06 10:53] added certificate mozilla/ABAecom_=sub.__Am._Bankers_Assn.=_Root_CA.crt
    [2011-02-06 10:53] added certificate mozilla/AOL_Time_Warner_Root_Certification_Authority_1.crt
    [2011-02-06 10:53] added certificate mozilla/AOL_Time_Warner_Root_Certification_Authority_2.crt
    [2011-02-06 10:53] added certificate mozilla/AddTrust_External_Root.crt
    [2011-02-06 10:53] added certificate mozilla/AddTrust_Low-Value_Services_Root.crt
    [2011-02-06 10:53] added certificate mozilla/AddTrust_Public_Services_Root.crt
    [2011-02-06 10:53] added certificate mozilla/AddTrust_Qualified_Certificates_Root.crt
    [2011-02-06 10:53] added certificate mozilla/America_Online_Root_Certification_Authority_1.crt
    [2011-02-06 10:53] added certificate mozilla/America_Online_Root_Certification_Authority_2.crt
    [2011-02-06 10:53] added certificate mozilla/Baltimore_CyberTrust_Root.crt
    [2011-02-06 10:53] added certificate mozilla/COMODO_Certification_Authority.crt
    [2011-02-06 10:53] ignored import, signature not available: mozilla/COMODO_ECC_Certification_Authority.crt
    [2011-02-06 10:53] -> keytool error: java.security.NoSuchAlgorithmException: SHA384withECDSA Signature not available
    [2011-02-06 10:53] added certificate mozilla/Camerfirma_Chambers_of_Commerce_Root.crt
    [2011-02-06 10:53] added certificate mozilla/Camerfirma_Global_Chambersign_Root.crt
    [2011-02-06 10:53] added certificate mozilla/Certplus_Class_2_Primary_CA.crt
    [2011-02-06 10:53] added certificate mozilla/Certum_Root_CA.crt
    [2011-02-06 10:53] added certificate mozilla/Comodo_AAA_Services_root.crt
    [2011-02-06 10:53] added certificate mozilla/Comodo_Secure_Services_root.crt
    [2011-02-06 10:53] added certificate mozilla/Comodo_Trusted_Services_root.crt
    [2011-02-06 10:53] added certificate mozilla/DST_ACES_CA_X6.crt
    [2011-02-06 10:53] added certificate mozilla/DST_Root_CA_X3.crt
    [2011-02-06 10:53] added certificate mozilla/DigiCert_Assured_ID_Root_CA.crt
    [2011-02-06 10:53] added certificate mozilla/DigiCert_Global_Root_CA.crt
    [2011-02-06 10:53] added certificate mozilla/DigiCert_High_Assurance_EV_Root_CA.crt
    [2011-02-06 10:53] added certificate mozilla/DigiNotar_Root_CA.crt
    [2011-02-06 10:53] added certificate mozilla/Digital_Signature_Trust_Co._Global_CA_1.crt
    [2011-02-06 10:53] added certificate mozilla/Digital_Signature_Trust_Co._Global_CA_2.crt
    [2011-02-06 10:53] added certificate mozilla/Digital_Signature_Trust_Co._Global_CA_3.crt
    [2011-02-06 10:53] added certificate mozilla/Digital_Signature_Trust_Co._Global_CA_4.crt
    [2011-02-06 10:53] added certificate mozilla/Entrust.net_Global_Secure_Personal_CA.crt
    [2011-02-06 10:53] added certificate mozilla/Entrust.net_Global_Secure_Server_CA.crt
    [2011-02-06 10:53] added certificate mozilla/Entrust.net_Premium_2048_Secure_Server_CA.crt
    [2011-02-06 10:53] added certificate mozilla/Entrust.net_Secure_Personal_CA.crt
    [2011-02-06 10:53] added certificate mozilla/Entrust.net_Secure_Server_CA.crt
    [2011-02-06 10:53] added certificate mozilla/Entrust_Root_Certification_Authority.crt
    [2011-02-06 10:53] added certificate mozilla/Equifax_Secure_CA.crt
    [2011-02-06 10:53] added certificate mozilla/Equifax_Secure_Global_eBusiness_CA.crt
    [2011-02-06 10:53] added certificate mozilla/Equifax_Secure_eBusiness_CA_1.crt
    [2011-02-06 10:53] added certificate mozilla/Equifax_Secure_eBusiness_CA_2.crt
    [2011-02-06 10:53] added certificate mozilla/Firmaprofesional_Root_CA.crt
    [2011-02-06 10:53] added certificate mozilla/GTE_CyberTrust_Global_Root.crt
    [2011-02-06 10:53] added certificate mozilla/GTE_CyberTrust_Root_CA.crt
    [2011-02-06 10:53] added certificate mozilla/GeoTrust_Global_CA.crt
    [2011-02-06 10:53] added certificate mozilla/GeoTrust_Global_CA_2.crt
    [2011-02-06 10:53] added certificate mozilla/GeoTrust_Primary_Certification_Authority.crt
    [2011-02-06 10:53] added certificate mozilla/GeoTrust_Universal_CA.crt
    [2011-02-06 10:53] added certificate mozilla/GeoTrust_Universal_CA_2.crt
    [2011-02-06 10:53] added certificate mozilla/GlobalSign_Root_CA.crt
    [2011-02-06 10:53] added certificate mozilla/GlobalSign_Root_CA_-_R2.crt
    [2011-02-06 10:53] added certificate mozilla/Go_Daddy_Class_2_CA.crt
    [2011-02-06 10:53] added certificate mozilla/IPS_CLASE1_root.crt
    [2011-02-06 10:53] added certificate mozilla/IPS_CLASE3_root.crt
    [2011-02-06 10:53] added certificate mozilla/IPS_CLASEA1_root.crt
    [2011-02-06 10:54] added certificate mozilla/IPS_CLASEA3_root.crt
    [2011-02-06 10:54] added certificate mozilla/IPS_Chained_CAs_root.crt
    [2011-02-06 10:54] added certificate mozilla/IPS_Servidores_root.crt
    [2011-02-06 10:54] added certificate mozilla/IPS_Timestamping_root.crt
    [2011-02-06 10:54] added certificate mozilla/NetLock_Business_=Class_B=_Root.crt
    [2011-02-06 10:54] added certificate mozilla/NetLock_Express_=Class_C=_Root.crt
    [2011-02-06 10:54] added certificate mozilla/NetLock_Notary_=Class_A=_Root.crt
    [2011-02-06 10:54] added certificate mozilla/NetLock_Qualified_=Class_QA=_Root.crt
    [2011-02-06 10:54] added certificate mozilla/Network_Solutions_Certificate_Authority.crt
    [2011-02-06 10:54] added certificate mozilla/QuoVadis_Root_CA.crt
    [2011-02-06 10:54] added certificate mozilla/QuoVadis_Root_CA_2.crt
    [2011-02-06 10:54] added certificate mozilla/QuoVadis_Root_CA_3.crt
    [2011-02-06 10:54] added certificate mozilla/RSA_Root_Certificate_1.crt
    [2011-02-06 10:54] added certificate mozilla/RSA_Security_1024_v3.crt
    [2011-02-06 10:54] added certificate mozilla/RSA_Security_2048_v3.crt
    [2011-02-06 10:54] added certificate mozilla/SecureTrust_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Secure_Global_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Security_Communication_Root_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Sonera_Class_1_Root_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Sonera_Class_2_Root_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Staat_der_Nederlanden_Root_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Starfield_Class_2_CA.crt
    [2011-02-06 10:54] added certificate mozilla/StartCom_Certification_Authority.crt
    [2011-02-06 10:54] added certificate mozilla/StartCom_Ltd..crt
    [2011-02-06 10:54] added certificate mozilla/SwissSign_Gold_CA_-_G2.crt
    [2011-02-06 10:54] added certificate mozilla/SwissSign_Platinum_CA_-_G2.crt
    [2011-02-06 10:54] added certificate mozilla/SwissSign_Silver_CA_-_G2.crt
    [2011-02-06 10:54] added certificate mozilla/Swisscom_Root_CA_1.crt
    [2011-02-06 10:54] added certificate mozilla/TC_TrustCenter__Germany__Class_2_CA.crt
    [2011-02-06 10:54] added certificate mozilla/TC_TrustCenter__Germany__Class_3_CA.crt
    [2011-02-06 10:54] added certificate mozilla/TDC_Internet_Root_CA.crt
    [2011-02-06 10:54] added certificate mozilla/TDC_OCES_Root_CA.crt
    [2011-02-06 10:54] added certificate mozilla/TURKTRUST_Certificate_Services_Provider_Root_1.crt
    [2011-02-06 10:54] added certificate mozilla/TURKTRUST_Certificate_Services_Provider_Root_2.crt
    [2011-02-06 10:54] added certificate mozilla/Taiwan_GRCA.crt
    [2011-02-06 10:54] added certificate mozilla/Thawte_Personal_Basic_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Thawte_Personal_Freemail_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Thawte_Personal_Premium_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Thawte_Premium_Server_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Thawte_Server_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Thawte_Time_Stamping_CA.crt
    [2011-02-06 10:54] added certificate mozilla/UTN-USER_First-Network_Applications.crt
    [2011-02-06 10:54] added certificate mozilla/UTN_DATACorp_SGC_Root_CA.crt
    [2011-02-06 10:54] added certificate mozilla/UTN_USERFirst_Email_Root_CA.crt
    [2011-02-06 10:54] added certificate mozilla/UTN_USERFirst_Hardware_Root_CA.crt
    [2011-02-06 10:54] added certificate mozilla/ValiCert_Class_1_VA.crt
    [2011-02-06 10:54] added certificate mozilla/ValiCert_Class_2_VA.crt
    [2011-02-06 10:54] added certificate mozilla/VeriSign_Class_3_Public_Primary_Certification_Authority_-_G5.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_Class_1_Public_Primary_Certification_Authority.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G2.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G3.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_Class_2_Public_Primary_Certification_Authority.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G2.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G3.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G2.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G3.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G2.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G3.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_RSA_Secure_Server_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Verisign_Time_Stamping_Authority_CA.crt
    [2011-02-06 10:54] added certificate mozilla/Visa_International_Global_Root_2.crt
    [2011-02-06 10:54] added certificate mozilla/Visa_eCommerce_Root.crt
    [2011-02-06 10:54] added certificate mozilla/WellsSecure_Public_Root_Certificate_Authority.crt
    [2011-02-06 10:54] added certificate mozilla/Wells_Fargo_Root_CA.crt
    [2011-02-06 10:54] added certificate mozilla/XRamp_Global_CA_Root.crt
    [2011-02-06 10:54] added certificate mozilla/beTRUSTed_Root_CA-Baltimore_Implementation.crt
    [2011-02-06 10:54] added certificate mozilla/beTRUSTed_Root_CA.crt
    [2011-02-06 10:54] added certificate mozilla/beTRUSTed_Root_CA_-_Entrust_Implementation.crt
    [2011-02-06 10:54] added certificate mozilla/beTRUSTed_Root_CA_-_RSA_Implementation.crt
    [2011-02-06 10:54] added certificate mozilla/thawte_Primary_Root_CA.crt
    [2011-02-06 10:54] added certificate signet.pl/signet_ca1_pem.crt
    [2011-02-06 10:54] added certificate signet.pl/signet_ca2_pem.crt
    [2011-02-06 10:54] added certificate signet.pl/signet_ca3_pem.crt
    [2011-02-06 10:54] added certificate signet.pl/signet_ocspklasa2_pem.crt
    [2011-02-06 10:54] added certificate signet.pl/signet_ocspklasa3_pem.crt
    [2011-02-06 10:54] added certificate signet.pl/signet_pca2_pem.crt
    [2011-02-06 10:54] added certificate signet.pl/signet_pca3_pem.crt
    [2011-02-06 10:54] added certificate signet.pl/signet_rootca_pem.crt
    [2011-02-06 10:54] added certificate signet.pl/signet_tsa1_pem.crt
    [2011-02-06 10:54] added certificate spi-inc.org/spi-ca-2003.crt
    [2011-02-06 10:54] added certificate spi-inc.org/spi-cacert-2008.crt
    [2011-02-06 10:54] added certificate telesec.de/deutsche-telekom-root-ca-2.crt
    [2011-02-06 10:54] done.
    [2011-02-06 10:54] when you use a non-reparenting window manager
    [2011-02-06 10:54] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2011-02-06 10:54] /etc/profile.d/openjdk6.sh
    [2011-02-06 10:54] installed openjdk6 (6.b20_1.9.5-1)
    [2011-02-06 10:54] * see [url]http://wiki.archlinux.org/index.php/Openoffice[/url]
    [2011-02-06 10:54] * you may want to pacman -Ss libreoffice-extensions
    [2011-02-06 10:54] to see what extensions are prepared to install
    [2011-02-06 10:54] * it's recommended to install {hunspell,mythes,hyphen}-xx pkg for spell checking
    [2011-02-06 10:54] * make sure you have installed some ttf font (ttf-dejavu recommended)
    [2011-02-06 10:54] installed libreoffice (3.3.0.4-1)
    [2011-02-06 10:55] Running 'pacman -S libcups'
    [2011-02-06 10:55] upgraded libcups (1.4.6-1 -> 1.4.6-1)
    [2011-02-06 11:03] Running 'pacman -Rs hplip'
    [2011-02-06 11:03] removed hplip (3.10.9-2)
    [2011-02-06 11:03] removed net-snmp (5.5-7)
    [2011-02-06 11:03] removed foomatic-db-engine (4.0.6_20101215-1)
    [2011-02-06 11:03] removed foomatic-filters (4.0.6_20101215-1)
    [2011-02-06 11:03] removed foomatic-db (4.0.6_20101215-1)
    [2011-02-06 11:05] Running 'pacman -Rs sane'
    [2011-02-06 11:05] removed sane (1.0.21-4)
    [2011-02-06 11:05] removed libieee1284 (0.2.11-3)
    [2011-02-06 11:05] removed libgphoto2 (2.4.10.1-2)
    [2011-02-06 11:06] Running 'pacman -Rs python2-qt'
    [2011-02-06 11:06] removed python2-qt (4.8.3-1)
    [2011-02-06 11:06] removed python2-sip (4.12.1-1)
    [2011-02-06 11:06] Running 'pacman -Rs pygobject'
    [2011-02-06 11:06] Running 'pacman -Rs cups'
    [2011-02-06 11:06] removed cups (1.4.6-1)
    [2011-02-06 11:06] removed openslp (1.2.1-3)
    [2011-02-06 11:09] Running 'pacman -R libreoffice'
    [2011-02-06 11:11] removed libreoffice (3.3.0.4-1)
    [2011-02-06 11:14] Running 'pacman -U openoffice-it-3.2.1-1-any.pkg.tar.xz'
    [2011-02-06 11:17] Running 'pacman -U openoffice-it-3.2.0-1-any.pkg.tar.gz'
    [2011-02-06 11:18] Running 'pacman -U openoffice-it-3.2.1-1-any.pkg.tar.xz'
    [2011-02-06 11:18] Running 'pacman -U openoffice-it-3.2.1-1-any.pkg.tar.xz'
    [2011-02-06 11:37] Running 'pacman -U openoffice-base-3.2.1-1-i686.pkg.tar.xz'
    [2011-02-06 11:38] installed python (3.1.3-2)
    [2011-02-06 11:38] * check /etc/profile.d/openoffice.sh, then relogin or "source" the file
    [2011-02-06 11:38] * see [url]http://wiki.archlinux.org/index.php/Openoffice[/url]
    [2011-02-06 11:38] how to use extensions, e.g. for spell checking
    [2011-02-06 11:38] see /usr/lib/openoffice/share/extension/install what
    [2011-02-06 11:38] is shipped with this package
    [2011-02-06 11:38] * make sure you have installed a ttf font (ttf-dejavu recommended)
    [2011-02-06 11:38] installed openoffice-base (3.2.1-1)
    [2011-02-06 11:44] Running 'pacman -Rs openoffice'
    [2011-02-06 11:44] Running 'pacman -Rs openoffice-base'
    [2011-02-06 11:44] removed openoffice-base (3.2.1-1)
    [2011-02-06 11:44] removed redland (1.0.12-3)
    [2011-02-06 11:44] removed rasqal (0.9.21-1)
    [2011-02-06 11:44] removed python (3.1.3-2)
    [2011-02-06 11:44] removed lpsolve (5.5.2.0-1)
    [2011-02-06 11:44] removed libwpd (0.9.0-1)
    [2011-02-06 11:44] removed libgsf (1.14.18-2)
    [2011-02-06 11:44] removed libgraphite (2.3.1-1)
    [2011-02-06 11:44] removed hyphen (2.7.1-2)
    [2011-02-06 11:44] Running 'pacman -R libmatroska openjdk6'
    [2011-02-06 11:45] removed openjdk6 (6.b20_1.9.5-1)
    [2011-02-06 11:45] removed libmatroska (1.1.0-1)
    [2011-02-06 11:45] Running 'pacman -Scc'
    [2011-02-06 22:20] Running 'pacman -U openoffice-base-3.2.1-1-i686.pkg.tar.xz'
    [2011-02-06 22:21] installed python (3.1.3-2)
    [2011-02-06 22:21] installed libgsf (1.14.18-2)
    [2011-02-06 22:21] installed libwpd (0.9.0-1)
    [2011-02-06 22:21] installed rasqal (0.9.21-1)
    [2011-02-06 22:21] installed redland (1.0.12-3)
    [2011-02-06 22:21] installed libgraphite (2.3.1-1)
    [2011-02-06 22:21] installed hyphen (2.7.1-2)
    [2011-02-06 22:21] installed lpsolve (5.5.2.0-1)
    [2011-02-06 22:21] * check /etc/profile.d/openoffice.sh, then relogin or "source" the file
    [2011-02-06 22:21] * see [url]http://wiki.archlinux.org/index.php/Openoffice[/url]
    [2011-02-06 22:21] how to use extensions, e.g. for spell checking
    [2011-02-06 22:21] see /usr/lib/openoffice/share/extension/install what
    [2011-02-06 22:21] is shipped with this package
    [2011-02-06 22:21] * make sure you have installed a ttf font (ttf-dejavu recommended)
    [2011-02-06 22:21] installed openoffice-base (3.2.1-1)
    [2011-02-06 22:21] Running 'pacman -Rs openoffice-base'
    [2011-02-06 22:21] removed openoffice-base (3.2.1-1)
    [2011-02-06 22:21] removed redland (1.0.12-3)
    [2011-02-06 22:21] removed rasqal (0.9.21-1)
    [2011-02-06 22:21] removed python (3.1.3-2)
    [2011-02-06 22:21] removed lpsolve (5.5.2.0-1)
    [2011-02-06 22:21] removed libwpd (0.9.0-1)
    [2011-02-06 22:21] removed libgsf (1.14.18-2)
    [2011-02-06 22:21] removed libgraphite (2.3.1-1)
    [2011-02-06 22:21] removed hyphen (2.7.1-2)
    [2011-02-06 22:25] Running 'pacman -S openoffice-base'
    [2011-02-06 22:27] installed rasqal (0.9.21-1)
    [2011-02-06 22:27] installed redland (1.0.12-3)
    [2011-02-06 22:27] installed libgraphite (2.3.1-1)
    [2011-02-06 22:27] installed hyphen (2.7.1-2)
    [2011-02-06 22:27] installed lpsolve (5.5.2.0-1)
    [2011-02-06 22:28] * check /etc/profile.d/openoffice.sh, then relogin or "source" the file
    [2011-02-06 22:28] * see [url]http://wiki.archlinux.org/index.php/Openoffice[/url]
    [2011-02-06 22:28] how to install extensions
    [2011-02-06 22:28] * make sure you have installed a ttf font (ttf-dejavu recommended)
    [2011-02-06 22:28] installed openoffice-base (3.3.0-1)
    Which may be the problem?
    Last edited by mario.torme (2011-02-10 17:37:21)

    After reboot:
    Xorg.0.log;
    [ 17.581]
    X.Org X Server 1.9.4
    Release Date: 2011-02-04
    [ 17.581] X Protocol Version 11, Revision 0
    [ 17.581] Build Operating System: Linux 2.6.37-ARCH i686
    [ 17.581] Current Operating System: Linux myhost 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011 i686
    [ 17.581] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/eda43846-2406-47d5-82a9-3eac637d73b5 rootflags=rw rootfstype=ext4 ro
    [ 17.581] Build Date: 04 February 2011 09:39:45PM
    [ 17.581]
    [ 17.587] Current version of pixman: 0.20.2
    [ 17.587] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 17.587] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 17.587] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 7 22:27:09 2011
    [ 17.620] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 17.648] (==) No Layout section. Using the first Screen section.
    [ 17.648] (==) No screen section available. Using defaults.
    [ 17.648] (**) |-->Screen "Default Screen Section" (0)
    [ 17.648] (**) | |-->Monitor "<default monitor>"
    [ 17.649] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 17.649] (==) Automatically adding devices
    [ 17.649] (==) Automatically enabling devices
    [ 17.710] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 17.710] Entry deleted from font path.
    [ 17.742] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 17.742] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 17.742] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 17.742] (II) Loader magic: 0x81f3040
    [ 17.742] (II) Module ABI versions:
    [ 17.742] X.Org ANSI C Emulation: 0.4
    [ 17.742] X.Org Video Driver: 8.0
    [ 17.742] X.Org XInput driver : 11.0
    [ 17.742] X.Org Server Extension : 4.0
    [ 17.743] (--) PCI:*(0:1:0:0) 1002:7181:1462:0400 rev 0, Mem @ 0xe0000000/268435456, 0xfddf0000/65536, I/O @ 0x0000de00/256, BIOS @ 0x????????/131072
    [ 17.743] (--) PCI: (0:1:0:1) 1002:71a1:1462:0401 rev 0, Mem @ 0xfdde0000/65536
    [ 17.744] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 17.744] (II) LoadModule: "extmod"
    [ 17.803] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 17.811] (II) Module extmod: vendor="X.Org Foundation"
    [ 17.811] compiled for 1.9.4, module version = 1.0.0
    [ 17.811] Module class: X.Org Server Extension
    [ 17.811] ABI class: X.Org Server Extension, version 4.0
    [ 17.811] (II) Loading extension MIT-SCREEN-SAVER
    [ 17.811] (II) Loading extension XFree86-VidModeExtension
    [ 17.811] (II) Loading extension XFree86-DGA
    [ 17.811] (II) Loading extension DPMS
    [ 17.811] (II) Loading extension XVideo
    [ 17.811] (II) Loading extension XVideo-MotionCompensation
    [ 17.811] (II) Loading extension X-Resource
    [ 17.811] (II) LoadModule: "dbe"
    [ 17.811] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 17.820] (II) Module dbe: vendor="X.Org Foundation"
    [ 17.820] compiled for 1.9.4, module version = 1.0.0
    [ 17.820] Module class: X.Org Server Extension
    [ 17.820] ABI class: X.Org Server Extension, version 4.0
    [ 17.820] (II) Loading extension DOUBLE-BUFFER
    [ 17.820] (II) LoadModule: "glx"
    [ 17.820] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 17.828] (II) Module glx: vendor="X.Org Foundation"
    [ 17.828] compiled for 1.9.4, module version = 1.0.0
    [ 17.828] ABI class: X.Org Server Extension, version 4.0
    [ 17.829] (==) AIGLX enabled
    [ 17.829] (II) Loading extension GLX
    [ 17.829] (II) LoadModule: "record"
    [ 17.829] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 17.834] (II) Module record: vendor="X.Org Foundation"
    [ 17.834] compiled for 1.9.4, module version = 1.13.0
    [ 17.834] Module class: X.Org Server Extension
    [ 17.834] ABI class: X.Org Server Extension, version 4.0
    [ 17.834] (II) Loading extension RECORD
    [ 17.834] (II) LoadModule: "dri"
    [ 17.834] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 17.938] (II) Module dri: vendor="X.Org Foundation"
    [ 17.938] compiled for 1.9.4, module version = 1.0.0
    [ 17.938] ABI class: X.Org Server Extension, version 4.0
    [ 17.938] (II) Loading extension XFree86-DRI
    [ 17.938] (II) LoadModule: "dri2"
    [ 17.938] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 17.939] (II) Module dri2: vendor="X.Org Foundation"
    [ 17.939] compiled for 1.9.4, module version = 1.2.0
    [ 17.939] ABI class: X.Org Server Extension, version 4.0
    [ 17.939] (II) Loading extension DRI2
    [ 17.939] (==) Matched ati as autoconfigured driver 0
    [ 17.939] (==) Matched vesa as autoconfigured driver 1
    [ 17.939] (==) Matched fbdev as autoconfigured driver 2
    [ 17.939] (==) Assigned the driver to the xf86ConfigLayout
    [ 17.939] (II) LoadModule: "ati"
    [ 17.939] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 17.942] (II) Module ati: vendor="X.Org Foundation"
    [ 17.942] compiled for 1.9.3.901, module version = 6.14.0
    [ 17.942] Module class: X.Org Video Driver
    [ 17.942] ABI class: X.Org Video Driver, version 8.0
    [ 17.942] (II) LoadModule: "radeon"
    [ 17.942] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 17.999] (II) Module radeon: vendor="X.Org Foundation"
    [ 17.999] compiled for 1.9.3.901, module version = 6.14.0
    [ 17.999] Module class: X.Org Video Driver
    [ 18.000] ABI class: X.Org Video Driver, version 8.0
    [ 18.001] (II) LoadModule: "vesa"
    [ 18.001] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 18.009] (II) Module vesa: vendor="X.Org Foundation"
    [ 18.009] compiled for 1.9.0, module version = 2.3.0
    [ 18.009] Module class: X.Org Video Driver
    [ 18.009] ABI class: X.Org Video Driver, version 8.0
    [ 18.009] (II) LoadModule: "fbdev"
    [ 18.009] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 18.014] (II) Module fbdev: vendor="X.Org Foundation"
    [ 18.014] compiled for 1.9.0, module version = 0.4.2
    [ 18.014] ABI class: X.Org Video Driver, version 8.0
    [ 18.014] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
    ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
    ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6250 Graphics, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, AMD Radeon HD 6900M Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS,
    Mobility Radeon HD 6000 Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, BARTS, BARTS, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6800 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS
    [ 18.022] (II) VESA: driver for VESA chipsets: vesa
    [ 18.022] (II) FBDEV: driver for framebuffer: fbdev
    [ 18.023] (++) using VT number 7
    [ 18.028] (II) [KMS] Kernel modesetting enabled.
    [ 18.028] (WW) Falling back to old probe method for vesa
    [ 18.028] (WW) Falling back to old probe method for fbdev
    [ 18.028] (II) Loading sub module "fbdevhw"
    [ 18.028] (II) LoadModule: "fbdevhw"
    [ 18.028] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 18.048] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 18.048] compiled for 1.9.4, module version = 0.0.2
    [ 18.048] ABI class: X.Org Video Driver, version 8.0
    [ 18.048] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 18.048] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 18.048] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 18.048] (==) RADEON(0): Default visual is TrueColor
    [ 18.048] (==) RADEON(0): RGB weight 888
    [ 18.048] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 18.048] (--) RADEON(0): Chipset: "ATI Radeon X1600" (ChipID = 0x7181)
    [ 18.048] (II) RADEON(0): PCIE card detected
    [ 18.048] drmOpenDevice: node name is /dev/dri/card0
    [ 18.048] drmOpenDevice: open result is 8, (OK)
    [ 18.048] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 18.048] drmOpenDevice: node name is /dev/dri/card0
    [ 18.048] drmOpenDevice: open result is 8, (OK)
    [ 18.048] drmOpenByBusid: drmOpenMinor returns 8
    [ 18.048] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 18.048] (II) RADEON(0): KMS Color Tiling: enabled
    [ 18.048] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 18.080] (II) RADEON(0): Output DVI-0 has no monitor section
    [ 18.107] (II) RADEON(0): Output S-video has no monitor section
    [ 18.161] (II) RADEON(0): Output DVI-1 has no monitor section
    [ 18.190] (II) RADEON(0): EDID for output DVI-0
    [ 18.217] (II) RADEON(0): EDID for output S-video
    [ 18.271] (II) RADEON(0): EDID for output DVI-1
    [ 18.271] (II) RADEON(0): Manufacturer: SAM Model: 293 Serial#: 1146040633
    [ 18.271] (II) RADEON(0): Year: 2007 Week: 8
    [ 18.271] (II) RADEON(0): EDID Version: 1.3
    [ 18.271] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 18.272] (II) RADEON(0): Sync: Separate Composite
    [ 18.272] (II) RADEON(0): Max Image Size [cm]: horiz.: 41 vert.: 26
    [ 18.272] (II) RADEON(0): Gamma: 2.20
    [ 18.272] (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    [ 18.272] (II) RADEON(0): First detailed timing is preferred mode
    [ 18.272] (II) RADEON(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
    [ 18.272] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 18.272] (II) RADEON(0): Supported established timings:
    [ 18.272] (II) RADEON(0): 720x400@70Hz
    [ 18.272] (II) RADEON(0): 640x480@60Hz
    [ 18.272] (II) RADEON(0): 640x480@67Hz
    [ 18.272] (II) RADEON(0): 640x480@72Hz
    [ 18.272] (II) RADEON(0): 640x480@75Hz
    [ 18.272] (II) RADEON(0): 800x600@56Hz
    [ 18.272] (II) RADEON(0): 800x600@60Hz
    [ 18.272] (II) RADEON(0): 800x600@72Hz
    [ 18.272] (II) RADEON(0): 800x600@75Hz
    [ 18.272] (II) RADEON(0): 832x624@75Hz
    [ 18.272] (II) RADEON(0): 1024x768@60Hz
    [ 18.272] (II) RADEON(0): 1024x768@70Hz
    [ 18.272] (II) RADEON(0): 1024x768@75Hz
    [ 18.272] (II) RADEON(0): 1280x1024@75Hz
    [ 18.272] (II) RADEON(0): 1152x864@75Hz
    [ 18.272] (II) RADEON(0): Manufacturer's mask: 0
    [ 18.272] (II) RADEON(0): Supported standard timings:
    [ 18.272] (II) RADEON(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 18.272] (II) RADEON(0): #1: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 18.272] (II) RADEON(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 18.272] (II) RADEON(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 18.272] (II) RADEON(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 18.272] (II) RADEON(0): Supported detailed timing:
    [ 18.272] (II) RADEON(0): clock: 106.5 MHz Image Size: 408 x 225 mm
    [ 18.272] (II) RADEON(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
    [ 18.272] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
    [ 18.272] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
    [ 18.272] (II) RADEON(0): Monitor name: SyncMaster
    [ 18.272] (II) RADEON(0): Serial No: HSHP232928
    [ 18.272] (II) RADEON(0): EDID (in hex):
    [ 18.272] (II) RADEON(0): 00ffffffffffff004c2d930239314f44
    [ 18.272] (II) RADEON(0): 081101036c291a782ade95a3544c9926
    [ 18.272] (II) RADEON(0): 0f5054bfef809500950f81808140714f
    [ 18.272] (II) RADEON(0): 0101010101019a29a0d0518422305098
    [ 18.272] (II) RADEON(0): 360098e11000001c000000fd00384b1e
    [ 18.272] (II) RADEON(0): 510e000a202020202020000000fc0053
    [ 18.272] (II) RADEON(0): 796e634d61737465720a2020000000ff
    [ 18.272] (II) RADEON(0): 00485348503233323932380a2020008d
    [ 18.272] (II) RADEON(0): Printing probed modes for output DVI-1
    [ 18.272] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 18.272] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 18.272] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 18.272] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 18.272] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 18.272] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 18.272] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 18.272] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 18.273] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 18.273] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 18.273] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 18.273] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 18.273] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 18.273] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 18.273] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    [ 18.273] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 18.273] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 18.273] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 18.273] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 18.273] (II) RADEON(0): Output DVI-0 disconnected
    [ 18.273] (II) RADEON(0): Output S-video disconnected
    [ 18.273] (II) RADEON(0): Output DVI-1 connected
    [ 18.273] (II) RADEON(0): Using exact sizes for initial modes
    [ 18.273] (II) RADEON(0): Output DVI-1 using initial mode 1440x900
    [ 18.273] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 18.273] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:1fab2000
    [ 18.273] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 18.273] (==) RADEON(0): DPI set to (96, 96)
    [ 18.273] (II) Loading sub module "fb"
    [ 18.273] (II) LoadModule: "fb"
    [ 18.273] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 18.277] (II) Module fb: vendor="X.Org Foundation"
    [ 18.277] compiled for 1.9.4, module version = 1.0.0
    [ 18.277] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 18.277] (II) Loading sub module "ramdac"
    [ 18.277] (II) LoadModule: "ramdac"
    [ 18.277] (II) Module "ramdac" already built-in
    [ 18.277] (II) Loading sub module "exa"
    [ 18.277] (II) LoadModule: "exa"
    [ 18.278] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 18.287] (II) Module exa: vendor="X.Org Foundation"
    [ 18.287] compiled for 1.9.4, module version = 2.5.0
    [ 18.287] ABI class: X.Org Video Driver, version 8.0
    [ 18.287] (II) UnloadModule: "vesa"
    [ 18.287] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 18.287] (II) UnloadModule: "fbdev"
    [ 18.287] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 18.287] (II) UnloadModule: "fbdevhw"
    [ 18.287] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
    [ 18.287] (--) Depth 24 pixmap format is 32 bpp
    [ 18.287] (II) RADEON(0): [DRI2] Setup complete
    [ 18.287] (II) RADEON(0): [DRI2] DRI driver: r300
    [ 18.287] (II) RADEON(0): Front buffer size: 5244K
    [ 18.287] (II) RADEON(0): VRAM usage limit set to 462250K
    [ 18.308] (==) RADEON(0): Backing store disabled
    [ 18.308] (II) RADEON(0): Direct rendering enabled
    [ 18.310] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
    [ 18.310] (II) RADEON(0): Setting EXA maxPitchBytes
    [ 18.310] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 18.310] (II) EXA(0): Driver registered support for the following operations:
    [ 18.310] (II) Solid
    [ 18.310] (II) Copy
    [ 18.310] (II) Composite (RENDER acceleration)
    [ 18.310] (II) UploadToScreen
    [ 18.310] (II) DownloadFromScreen
    [ 18.320] (II) RADEON(0): Acceleration enabled
    [ 18.320] (==) RADEON(0): DPMS enabled
    [ 18.320] (==) RADEON(0): Silken mouse enabled
    [ 18.321] (II) RADEON(0): Set up textured video
    [ 18.321] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 18.338] (--) RandR disabled
    [ 18.338] (II) Initializing built-in extension Generic Event Extension
    [ 18.338] (II) Initializing built-in extension SHAPE
    [ 18.338] (II) Initializing built-in extension MIT-SHM
    [ 18.338] (II) Initializing built-in extension XInputExtension
    [ 18.338] (II) Initializing built-in extension XTEST
    [ 18.338] (II) Initializing built-in extension BIG-REQUESTS
    [ 18.338] (II) Initializing built-in extension SYNC
    [ 18.338] (II) Initializing built-in extension XKEYBOARD
    [ 18.338] (II) Initializing built-in extension XC-MISC
    [ 18.338] (II) Initializing built-in extension SECURITY
    [ 18.338] (II) Initializing built-in extension XINERAMA
    [ 18.338] (II) Initializing built-in extension XFIXES
    [ 18.338] (II) Initializing built-in extension RENDER
    [ 18.338] (II) Initializing built-in extension RANDR
    [ 18.338] (II) Initializing built-in extension COMPOSITE
    [ 18.338] (II) Initializing built-in extension DAMAGE
    [ 18.483] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 18.483] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 18.483] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 18.483] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 18.483] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 18.483] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
    [ 18.483] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 18.484] (II) RADEON(0): Setting screen physical size to 380 x 238
    [ 18.843] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 18.843] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 18.843] (II) LoadModule: "evdev"
    [ 18.844] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.855] (II) Module evdev: vendor="X.Org Foundation"
    [ 18.855] compiled for 1.9.0, module version = 2.5.0
    [ 18.855] Module class: X.Org XInput Driver
    [ 18.855] ABI class: X.Org XInput driver, version 11.0
    [ 18.855] (**) Power Button: always reports core events
    [ 18.855] (**) Power Button: Device: "/dev/input/event1"
    [ 18.880] (--) Power Button: Found keys
    [ 18.880] (II) Power Button: Configuring as keyboard
    [ 18.880] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 18.880] (**) Option "xkb_rules" "evdev"
    [ 18.880] (**) Option "xkb_model" "evdev"
    [ 18.880] (**) Option "xkb_layout" "it"
    [ 18.930] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 18.930] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 18.930] (**) Power Button: always reports core events
    [ 18.930] (**) Power Button: Device: "/dev/input/event0"
    [ 18.940] (--) Power Button: Found keys
    [ 18.940] (II) Power Button: Configuring as keyboard
    [ 18.940] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 18.940] (**) Option "xkb_rules" "evdev"
    [ 18.940] (**) Option "xkb_model" "evdev"
    [ 18.940] (**) Option "xkb_layout" "it"
    [ 18.941] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 18.941] (II) No input driver/identifier specified (ignoring)
    [ 18.942] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event7)
    [ 18.942] (II) No input driver/identifier specified (ignoring)
    [ 18.944] (II) config/udev: Adding input device BTC USB Multimedia Cordless Kit (/dev/input/event2)
    [ 18.944] (**) BTC USB Multimedia Cordless Kit : Applying InputClass "evdev keyboard catchall"
    [ 18.944] (**) BTC USB Multimedia Cordless Kit : always reports core events
    [ 18.944] (**) BTC USB Multimedia Cordless Kit : Device: "/dev/input/event2"
    [ 18.966] (--) BTC USB Multimedia Cordless Kit : Found keys
    [ 18.966] (II) BTC USB Multimedia Cordless Kit : Configuring as keyboard
    [ 18.966] (II) XINPUT: Adding extended input device "BTC USB Multimedia Cordless Kit " (type: KEYBOARD)
    [ 18.966] (**) Option "xkb_rules" "evdev"
    [ 18.966] (**) Option "xkb_model" "evdev"
    [ 18.966] (**) Option "xkb_layout" "it"
    [ 18.967] (II) config/udev: Adding input device BTC USB Multimedia Cordless Kit (/dev/input/event3)
    [ 18.967] (**) BTC USB Multimedia Cordless Kit : Applying InputClass "evdev pointer catchall"
    [ 18.967] (**) BTC USB Multimedia Cordless Kit : Applying InputClass "evdev keyboard catchall"
    [ 18.967] (**) BTC USB Multimedia Cordless Kit : always reports core events
    [ 18.967] (**) BTC USB Multimedia Cordless Kit : Device: "/dev/input/event3"
    [ 18.983] (--) BTC USB Multimedia Cordless Kit : Found 3 mouse buttons
    [ 18.983] (--) BTC USB Multimedia Cordless Kit : Found scroll wheel(s)
    [ 18.983] (--) BTC USB Multimedia Cordless Kit : Found relative axes
    [ 18.983] (--) BTC USB Multimedia Cordless Kit : Found x and y relative axes
    [ 18.983] (--) BTC USB Multimedia Cordless Kit : Found keys
    [ 18.983] (II) BTC USB Multimedia Cordless Kit : Configuring as mouse
    [ 18.983] (II) BTC USB Multimedia Cordless Kit : Configuring as keyboard
    [ 18.983] (**) BTC USB Multimedia Cordless Kit : YAxisMapping: buttons 4 and 5
    [ 18.983] (**) BTC USB Multimedia Cordless Kit : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 18.983] (II) XINPUT: Adding extended input device "BTC USB Multimedia Cordless Kit " (type: KEYBOARD)
    [ 18.983] (**) Option "xkb_rules" "evdev"
    [ 18.983] (**) Option "xkb_model" "evdev"
    [ 18.983] (**) Option "xkb_layout" "it"
    [ 18.983] (**) BTC USB Multimedia Cordless Kit : (accel) keeping acceleration scheme 1
    [ 18.983] (**) BTC USB Multimedia Cordless Kit : (accel) acceleration profile 0
    [ 18.983] (**) BTC USB Multimedia Cordless Kit : (accel) acceleration factor: 2.000
    [ 18.983] (**) BTC USB Multimedia Cordless Kit : (accel) acceleration threshold: 4
    [ 18.983] (II) BTC USB Multimedia Cordless Kit : initialized for relative axes.
    [ 18.984] (II) config/udev: Adding input device BTC USB Multimedia Cordless Kit (/dev/input/mouse0)
    [ 18.984] (II) No input driver/identifier specified (ignoring)
    [ 18.985] (II) config/udev: Adding input device Primax HP Wireless Laser Mini Mouse (/dev/input/event4)
    [ 18.985] (**) Primax HP Wireless Laser Mini Mouse: Applying InputClass "evdev pointer catchall"
    [ 18.985] (**) Primax HP Wireless Laser Mini Mouse: always reports core events
    [ 18.985] (**) Primax HP Wireless Laser Mini Mouse: Device: "/dev/input/event4"
    [ 19.010] (--) Primax HP Wireless Laser Mini Mouse: Found 3 mouse buttons
    [ 19.010] (--) Primax HP Wireless Laser Mini Mouse: Found scroll wheel(s)
    [ 19.010] (--) Primax HP Wireless Laser Mini Mouse: Found relative axes
    [ 19.010] (--) Primax HP Wireless Laser Mini Mouse: Found x and y relative axes
    [ 19.010] (--) Primax HP Wireless Laser Mini Mouse: Found absolute axes
    [ 19.010] (II) Primax HP Wireless Laser Mini Mouse: Configuring as mouse
    [ 19.010] (**) Primax HP Wireless Laser Mini Mouse: YAxisMapping: buttons 4 and 5
    [ 19.010] (**) Primax HP Wireless Laser Mini Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 19.010] (II) XINPUT: Adding extended input device "Primax HP Wireless Laser Mini Mouse" (type: MOUSE)
    [ 19.010] (**) Primax HP Wireless Laser Mini Mouse: (accel) keeping acceleration scheme 1
    [ 19.010] (**) Primax HP Wireless Laser Mini Mouse: (accel) acceleration profile 0
    [ 19.010] (**) Primax HP Wireless Laser Mini Mouse: (accel) acceleration factor: 2.000
    [ 19.010] (**) Primax HP Wireless Laser Mini Mouse: (accel) acceleration threshold: 4
    [ 19.010] (II) Primax HP Wireless Laser Mini Mouse: initialized for relative axes.
    [ 19.010] (WW) Primax HP Wireless Laser Mini Mouse: ignoring absolute axes.
    [ 19.010] (II) config/udev: Adding input device Primax HP Wireless Laser Mini Mouse (/dev/input/mouse1)
    [ 19.010] (II) No input driver/identifier specified (ignoring)
    [ 19.020] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 19.020] (II) No input driver/identifier specified (ignoring)
    [ 22.464] (II) RADEON(0): EDID vendor "SAM", prod id 659
    [ 22.464] (II) RADEON(0): Using EDID range info for horizontal sync
    [ 22.465] (II) RADEON(0): Using EDID range info for vertical refresh
    [ 22.465] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 22.465] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 22.465] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 22.465] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 22.465] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 22.465] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 22.465] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 22.465] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 22.465] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 22.465] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 22.465] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 22.465] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 22.465] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 22.465] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 22.465] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 22.465] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 22.465] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 22.465] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 22.465] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 22.465] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 22.595] (II) RADEON(0): EDID vendor "SAM", prod id 659
    [ 22.595] (II) RADEON(0): Using hsync ranges from config file
    [ 22.595] (II) RADEON(0): Using vrefresh ranges from config file
    [ 22.595] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 22.595] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 22.595] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 22.595] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 22.595] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 22.595] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 22.595] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 22.595] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 22.595] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 22.595] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 22.595] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 22.595] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 22.595] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 22.595] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 22.595] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 22.595] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 22.595] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 22.595] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 22.595] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 22.595] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 22.735] (II) RADEON(0): EDID vendor "SAM", prod id 659
    [ 22.735] (II) RADEON(0): Using hsync ranges from config file
    [ 22.735] (II) RADEON(0): Using vrefresh ranges from config file
    [ 22.735] (II) RADEON(0): Printing DDC gathered Modelines:
    [ 22.735] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 22.735] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 22.735] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 22.735] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 22.735] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 22.735] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 22.735] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 22.735] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 22.735] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 22.735] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 22.735] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 22.735] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 22.735] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 22.735] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 22.735] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 22.735] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 22.735] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 22.735] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 22.735] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)

  • X11 and open source applications issues

    I have a brand new iMac 20 w/ OS X 10.4.8/ Core Duo 2.16/ ATI X1600 w/ 256 mb vram/ 1 gb of system ram. I have been using open source systems for almost two years and would like to continue to use some of the applications which are provided for Macintosh. When attempting to install any of the X11 applications, I get a message saying that I need to have X11 installed in order to install and run the apps. I downloaded the Apple X11 1.0 installer because I did not see X11 on my system. When trying to install it, I got a message saying that it could not be installed because there is a more up to date version already installed.
    So, the installers for applications such as, Open office and Gimp Shop, do not see that I actually have X11 installed and they will not install because of it. I do not know enough about OS X to work through this issue.
    Any help will be greatly appreciated.
    Thanks,
    zeusx64

    I did not see another version of X11 but I did go into the installation of the optional items and did not see it listed. I am fairly well versed in using computers, so I am not a complete noob but I am fairly new to Mac itself.
    I have FreeBSD experience, which in itself, gives a bit of X11 experience.
    That said, I have already looked for needed packages to install, tried to install and as I said before, I recieved the message during the attempted install of X11, which said I already had a more up to date version installed.
    If I have by chance missed something along the way, feel free to provide a link to the needed package.
    I am open to learning all that I can and realize that we all are in a never ending process of that learning.
    Thanks for the replies and I hope we can figure out what I have not on my own.
    I will check my mail when I am at home after work.
    Thanks again.

  • I just upgraded to yosemite, now gimp is not opening.  i downloaded and isnstalled xquartz, restarted my computer and gimp is still not opening.  i click on the icon and nothing happens.

    i just upgraded to yosemite, now gimp is not opening.  i downloaded and isnstalled xquartz, restarted my computer and gimp is still not opening.  i click on the icon and nothing happens.  help!

    I was using gimp fine for years with my osx 10 6 8 up until yesterday.  Last night when I downloaded yosemite, gimp has not been working ever since.  I clicked on the icon and it said that x11 wasn't compatible with yosemite and lead me to a link from apple support which said that I need to download xquartz for gimp to work. 

  • What is X11 and what does it do is it worth downloading i've just got a new Macbook air

    What is x11and what does it do i've just bought a Macbook Air note book and was wondering if this x11 is worth downloading

    In short, think of it as a graphical interface (e.g. window, menus, etc.) that can work across multiple systems. Applications written to use an X11 interface can run on any OS (Mac, Linux, Unix, Windows) with a suitable X11 server (such as XQuartz, mentioned above).
    The pros are that such an app can run anywhere. The cons being that it's kind of a lowest-common-denominator effect so it doesn't look like most native applications.
    One cool effect, though, is the remote nature of X11 - it's possible to run an application on a remote machine (over the LAN, or even over the internet) and have it display its output on your local X11 system, so your mouse clicks, keystrokes, etc. are transmitted over the wire, processed by the server, and the results displayed on your screen.
    As to whether it's worth it - there's no harm in downloading and installing it - it won't do anything unless any app you're running calls for X11, and any application that needs it will tell you so.

  • Adobe Photoshop CS4 and GIMP Help

    I think I am fairly computer literate and I enjoy trying things out before having to consult with the owners manual but two programs that absolutely stump me are Adobe and Gimp. I hope I am in the right area because I need help understanding how to use either of those programs on my macbook. I would like to make simple website banners and myspace type comment boxes and i've had such a hard time comprehending those programs. I've done many google searches for tutorials and majority of them teach on a level of intermediate users. I've never used either program.
    Or if anyone knows of a simple banner making program, please enlighten me.

    demetracaston wrote:
    I would like to make simple website banners and myspace type comment boxes and i've had such a hard time comprehending those programs. I've done many google searches for tutorials and majority of them teach on a level of intermediate users. I've never used either program.
    It is true that the use of a specific program not made by Apple is well outside the scope of this particular forum, although it isn't wrong to ask around. (For example, if someone has an Apple Aperture question, you don't ask it here, you ask it in the Aperture forum, even though Aperture runs on OS X.)
    It sounds like you might actually want to pick up a book about the basics of digital painting programs in general. When making graphics as simple as web banners, the functions provided by Photoshop and GIMP are so standard that other programs imitate them. Meaning if you don't have those down yet, you'll have trouble with any program you try. If you have problems understanding these core functions at an intermediate level, you probably should take some tutorials at a basic level, like the QuickStart guides or Classroom in a Book type of guides (I'm thinking of the printed books of this type), hopefully some concentrating on web graphics.
    If we were to lay out what to do in Photoshop or GIMP to make a web banner, it would be: Make a new document the size of the allotted space on the web page, in pixels. Use the type tool and graphics tools to create the banner graphics. Save a copy of the document in the web file format required for insertion into the web page.
    If you need more details than that, you do need more grounding than should be provided in a forum that's intended to discuss an operating system.

  • How to input japanese text in x11 and openoffice

    I posted this question in the Mac OS section, but someone suggested that I post it here, too.
    I recently installed X11 on my computer to run OpenOffice.org. Unfortunately, I can't figure out how to switch between languages. Normally, I use the hot keys shift-cmnd-space to toggle between languages, but on X11, it won't allow me to do that.
    I don't know very much about X11, and I only downloaded it because I needed it to use OOo. OOo seems to have the easiest way to to input furigana characters when typing in Japanese, so it would make my life a lot easier if I could use OOo when creating Japanese documents. I'm not hellbent on using OOo, but the furigna input seemed easier to do than with Word (also, word has been crashing a lot lately, so I thought I'd try something else). If anyone out there uses a different program with furigana capabilities, I'd be open to hearing about that, too. Especially if it's easier to configure.
    Either way, I still need to figure out how to get X11 to input different languages. Can I use the katoeri program in X11 to input Japanese characters? Do I need to install something else? I'd also like to be able to use French, so if I need to do something special for that, please let me know how to do that, too.
    Also, if you couldn't tell, I don't know anything about computers, open source or codes. I don't have unix on my computer, but figured maybe someone here might be able to help me. Please be patient with my ignorance about all this stuff!
    Thanks in advance

    Either way, I still need to figure out how to get X11 to input different languages.
    Not really. You wouldn't use X11 for anything other than OO I think.
    Do I need to install something else?
    Yes, after some more research it seems you need something called kinput2. You can search this forum for Japanese. Here is one item of possible interest:
    http://discussions.apple.com/thread.jspa?messageID=5249892&#5249892
    I'd also like to be able to use French,
    No problem. You should be able to demonstrate that for yourself already, since it is the same as normal OS X apps. Do you know how to do that?
    I don't have unix on my computer
    Yes you do, OS X is based on Unix, and X11 requires it.
    http://www.apple.com/macosx/technology/unix.html

  • Why are the colors in XTerm (x11) and Apple's terminal are different?

    Is there a way to fix this? I would like Apple's terminal to look like XTerm...
    the screenshot on the left is X11, and the screenshot on the right is Apple's terminal:

    Patrick Collins wrote:
    The "Pro" setting and the others are nothing more than settings for background and foreground text. Not the actual ANSI colors found when you do a colorized LS, or syntax highlighting in editors like vim.
    So, that is my question, why are these two terminals interpreting colors differently? Where can I FIX what it thinks "blue" is, etc?
    OK. I get it now. Apple's blue isn't blue enough I guess. Apparently people have been up in arms over this for years. I guess I missed it.
    This hack: http://ciaranwal.sh/2007/11/01/customising-colours-in-leopard-terminal
    is supposedly working in 10.6.4 now.

  • Using X11 and Fink/Fink Commander to run Compiz Fusion?

    Hi! One of my friends who loves Ubuntu Linux showed me some weird app called Compiz Fusion and im like ooo... i wanna play wiht that. And I remembered that OS X had a way of installing Linux apps.. so I downloaded the .tar of compiz fusion and I also downloaded and installed Fink and Fink Commander for OS X 10.5.2 but um.. yeah Im not very good with running terminal and junk.. I was following directions so I checked my list of app packages Fink could install in Terminal but either I didnt see compiz or it came up as a name I didnt understand.. does anyone here have experience running X11 and Fink? Or if you have a link where I can teach myself X11 and Fink that would work too! Thanks in advance!

    thepotter wrote:
    Whoa there etersoft, I don't want to get in a flame war.
    Not to worry. I would lose interest long before that happened
    I didn't knock OSX except to point out an actual bug with X11.
    But it is not a bug with OSX if some 3rd party tool is not compatible. It is a Mac, not a Linux workstation. If you want to run Linux on it, you can install Linux on it. The Mac has its own window manager designed to allow most X11 apps run and not look too bad alongside the Mac apps. It really is a design feature.
    Personally, I like both.
    I like UNIX - a lot. But I'm not too fond of Linux. It is for people who do want to build their own machines out of components. I'm a software person, not a hardware person. That doesn't interest me in the least. As a software person, I have little interest in developing software for Linux because every single Linux box is unique. That is a hassle I don't want to deal with. That is why I like MacOS X so much - all the power of Solaris with the beauty and easy-of-use of a Mac.
    In the past there were tons of issues doing linux installs, and linux was fairly labeled as finicky and difficult. By the same token, when I was trying to upgrade to Leopard recently, I got a warning that my only option was "erase and install".
    You lucked out. Erase and install is the best way to install a major OS upgrade.
    No other options, no explanation why, no suggestions for fixing it -- it was as mysterious as a Linux install from 1999, albeit with a much prettier formatting error message.
    In 1999, I didn't even get that much from Linux. The X server just crashed as soon as the install was done and took the boot partition with it - reinstall from scratch. I have VectorLinux running in Parallels, but I never use it.

  • OpenOffice, X11 and mail

    When I attempt to open a PPS email attachment X11 and OpenOffice are started and they do not open the attachment and also it takes awhile to close them. I am able to control click the attachment go to Other and select Power Point (it does not give me a choice to always open with Power Point) and I have to do this each time. How do I get rid of OpenOffice, I found X11 and dumped it, hopefully when I do this I will be able to open my attachments. Thanks for any help
    Larry
    Wasn’t quit sure which category to post this in.

    tony,
    I'm not sure that OpenOffice uses your system fonts directly (could be wrong), but I know NeoOffice/J does and I'm not seeing the problem you describe.
    Lee C
    "The early bird may get the worm but the second mouse gets the cheese." -- Willie Nelson
    See the article Backup::Restore.

  • HT1338 x11 and x quartz launches and quits immediately.

    I am AFNI for fMRI analysis.When I launch terminal and type in afni a message appears showing instalizing x11 and nothing happens.When I attempt to manually launch x11 or x quartz the program quits immediately.I have reinstalled x quartz and same is continuing.Can someone please help as I am stuck .

    I am not sure whether is this the right way to communicate to a forum. I am just doing cut and paste as appears on console(Please I am a computer illiterate hope you undersatnd) .
    1) 04/02/2013 18:40:09.150 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:40:30.677 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:40:52.032 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:41:13.302 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:41:34.669 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:41:56.306 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:42:17.702 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:42:39.043 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:43:00.442 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:43:22.056 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:43:43.468 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:44:04.878 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:44:26.257 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:44:47.894 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:45:09.582 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:45:31.056 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:45:52.646 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:46:14.259 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:46:35.691 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:46:57.086 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:47:18.525 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:47:40.147 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:48:01.484 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:48:22.944 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:48:44.297 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:49:05.956 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:49:27.337 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:49:48.766 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:50:10.223 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:50:32.251 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:50:53.902 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:51:15.359 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:51:36.783 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:51:58.409 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:52:19.814 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:52:41.237 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:53:02.525 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:53:24.001 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:53:45.459 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:54:07.023 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:54:28.511 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:54:50.030 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:55:11.478 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:55:32.853 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:55:58.190 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:56:19.102 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:56:40.717 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:57:02.559 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:57:24.329 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:57:46.475 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:58:08.282 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:58:29.565 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:58:50.827 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:59:12.539 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:59:36.265 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:59:58.168 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:00:19.581 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:00:40.879 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:01:02.157 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:01:23.880 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:01:45.141 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:02:06.422 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:02:27.979 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:02:49.850 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:03:11.121 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:03:32.428 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:03:54.964 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:04:16.783 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:04:38.134 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:04:59.486 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:05:21.160 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:05:42.470 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:06:03.826 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:06:25.199 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:06:46.807 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:07:08.170 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:07:29.525 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:07:50.876 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:08:12.768 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:08:34.110 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:08:55.371 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:09:16.646 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:09:38.408 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:09:59.673 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:10:20.998 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:10:42.727 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:11:04.489 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:11:26.340 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:11:47.665 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:12:08.973 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:12:30.811 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:12:52.417 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:13:13.777 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:13:35.067 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:13:56.683 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:14:18.149 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:14:39.756 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:15:01.201 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:15:22.815 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:15:44.163 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:16:05.472 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:16:26.753 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:16:48.455 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:17:09.735 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:17:31.122 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:17:52.390 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:18:10.044 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:18:31.405 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:18:52.676 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:19:14.076 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:19:35.353 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:19:56.681 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:20:17.949 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:20:39.564 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:21:00.865 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:21:22.176 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:21:43.448 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:22:05.113 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:22:26.411 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:22:47.718 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:23:09.031 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:23:30.637 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:23:51.913 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:24:13.183 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:24:34.464 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:24:56.098 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:25:17.382 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    2)
    04/02/2013 19:25:19.381 org.macosforge.xquartz.startx:
    04/02/2013 19:25:21.384 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:23.389 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:25.394 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:27.400 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:29.403 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:31.408 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:33.412 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:35.417 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:37.422 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:38.426 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:38.426 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:25:38.426 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:25:38.426 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:25:38.433 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:25:38.436 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:38.653 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:25:38.682 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.65853 does not exist
    04/02/2013 19:25:38.722 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:25:38.744 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:25:38.758 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:25:38.763 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:25:38.774 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:25:40.763 org.macosforge.xquartz.startx:
    04/02/2013 19:25:42.766 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:44.770 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:46.775 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:48.780 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:50.784 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:52.790 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:54.795 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:56.800 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:58.805 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:58.913 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:25:59.808 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:59.808 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:25:59.808 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:25:59.808 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: /opt/X11/bin/xinit: server error
    04/02/2013 19:25:59.844 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:25:59.844 org.macosforge.xquartz.startx: /opt/X11/bin/xinit:
    04/02/2013 19:26:00.041 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:26:00.058 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66010 does not exist
    04/02/2013 19:26:00.086 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:26:00.094 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:26:00.113 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:26:00.120 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:26:00.198 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:26:02.112 org.macosforge.xquartz.startx:
    04/02/2013 19:26:04.116 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:06.120 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:08.125 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:10.130 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:12.136 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:14.140 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:16.145 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:18.149 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:20.154 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:20.298 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:26:21.161 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:21.161 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:26:21.161 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:26:21.161 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:26:21.505 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:26:21.507 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:21.674 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:26:21.714 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66165 does not exist
    04/02/2013 19:26:21.739 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:26:21.746 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:26:21.761 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:26:21.766 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:26:21.811 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:26:23.764 org.macosforge.xquartz.startx:
    04/02/2013 19:26:25.767 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:27.773 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:29.778 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:31.782 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:33.786 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:35.791 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:37.795 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:39.801 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:41.804 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:41.859 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:26:42.807 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:42.807 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:26:42.807 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:26:42.807 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections /opt/X11/bin/xinit: server error
    04/02/2013 19:26:42.832 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:26:42.836 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:43.017 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:26:43.055 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66320 does not exist
    04/02/2013 19:26:43.088 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:26:43.096 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:26:43.123 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:26:43.134 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:26:43.165 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:26:45.119 org.macosforge.xquartz.startx:
    04/02/2013 19:26:47.122 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:49.128 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:51.132 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:53.137 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:55.143 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:57.148 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:59.153 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:01.158 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:03.163 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:03.353 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:27:04.166 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:04.166 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:27:04.166 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:27:04.166 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:27:04.173 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:27:04.176 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:04.384 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:27:04.406 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66476 does not exist
    04/02/2013 19:27:04.435 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:27:04.446 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:27:04.481 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:27:04.500 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:27:04.515 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:27:06.479 org.macosforge.xquartz.startx:
    04/02/2013 19:27:08.481 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:10.486 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:12.492 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:14.497 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:16.503 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:18.507 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:20.511 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:22.516 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:24.521 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:24.620 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:27:25.524 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:25.524 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:27:25.524 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:27:25.524 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections /opt/X11/bin/xinit: server error
    04/02/2013 19:27:25.531 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:27:25.534 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:25.685 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:27:25.700 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66631 does not exist
    04/02/2013 19:27:25.724 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:27:25.735 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:27:25.748 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:27:25.755 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:27:25.766 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:27:27.753 org.macosforge.xquartz.startx:
    04/02/2013 19:27:29.756 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:31.762 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:33.767 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:35.772 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:37.777 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:39.782 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:41.788 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:43.793 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:45.799 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:45.923 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:27:46.803 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:46.803 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:27:46.803 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:27:46.803 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:27:46.810 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:27:46.836 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:47.045 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:27:47.128 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66786 does not exist
    04/02/2013 19:27:47.163 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:27:47.169 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:27:47.184 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:27:47.192 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:27:47.205 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:27:49.188 org.macosforge.xquartz.startx:
    04/02/2013 19:27:51.191 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:53.197 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:55.202 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:57.207 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:59.212 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:01.216 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:03.222 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:05.227 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:07.232 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:08.235 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:08.235 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:28:08.235 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:28:08.235 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:28:08.579 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:28:08.595 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:08.744 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:28:08.757 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66949 does not exist
    04/02/2013 19:28:08.781 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:28:08.789 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:28:08.802 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:28:08.807 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:28:08.819 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:28:10.808 org.macosforge.xquartz.startx:
    04/02/2013 19:28:12.811 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:14.816 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:16.821 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:18.825 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:20.830 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:22.836 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:24.840 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:26.846 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:28.851 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:29.855 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:29.855 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:28:29.855 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:28:29.855 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:28:29.862 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:28:29.865 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:30.076 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:28:30.113 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.67104 does not exist
    04/02/2013 19:28:30.143 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:28:30.232 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:28:30.246 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:28:30.251 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:28:30.264 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:28:32.251 org.macosforge.xquartz.startx:
    04/02/2013 19:28:34.254 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:36.259 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:38.264 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:40.269 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:42.274 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:44.279 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:46.292 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:48.296 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:50.300 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:50.349 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:28:51.303 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:51.303 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:28:51.303 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:28:51.303 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:28:51.310 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:28:51.312 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:51.530 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:28:51.552 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.67260 does not exist
    04/02/2013 19:28:51.583 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:28:51.603 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:28:51.642 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:28:51.646 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:28:51.670 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:28:53.646 org.macosforge.xquartz.startx:
    04/02/2013 19:28:55.649 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:57.654 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:59.659 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:01.663 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:03.669 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:05.673 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:07.679 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:09.684 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:11.689 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:11.737 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:29:12.693 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:12.694 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections /opt/X11/bin/xinit: giving up
    04/02/2013 19:29:12.694 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:29:12.694 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:29:12.702 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:29:12.705 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:12.899 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:29:12.934 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.67416 does not exist
    04/02/2013 19:29:12.966 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:29:12.979 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:29:13.064 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:29:13.069 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:29:13.094 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:29:15.069 org.macosforge.xquartz.startx:
    04/02/2013 19:29:17.072 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:19.077 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:21.082 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:23.086 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:25.092 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:27.097 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:29.103 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:31.108 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:33.113 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:33.212 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:29:34.117 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:34.117 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:29:34.117 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:29:34.117 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections /opt/X11/bin/xinit: server error
    04/02/2013 19:29:34.460 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:29:34.464 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:34.621 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:29:34.644 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.67571 does not exist
    04/02/2013 19:29:34.668 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:29:34.675 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:29:34.689 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:29:34.694 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:29:34.707 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:29:36.694 org.macosforge.xquartz.startx:
    04/02/2013 19:29:38.697 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:40.703 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:42.708 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:44.713 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:46.718 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:48.723 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:50.728 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:52.739 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:54.744 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:54.809 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:29:55.747 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:55.747 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:29:55.747 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:29:55.748 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:29:55.757 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:29:55.757 org.macosforge.xquartz.startx: /opt/X11/bin/xinit:
    04/02/2013 19:29:55.970 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:29:56.033 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.67726 does not exist
    04/02/2013 19:29:56.129 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:29:56.135 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:29:56.151 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:29:56.156 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:29:56.167 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:29:58.155 org.macosforge.xquartz.startx:
    04/02/2013 19:30:00.158 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:02.163 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:04.168 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:06.173 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:08.177 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:10.183 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:12.187 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:14.193 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:16.197 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:16.322 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:30:17.201 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:17.201 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:30:17.201 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:30:17.201 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:30:17.208 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:30:17.211 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:17.513 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:30:17.527 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.67883 does not exist
    04/02/2013 19:30:17.551 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:30:17.559 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:30:17.573 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:30:17.578 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:30:17.589 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:30:19.577 org.macosforge.xquartz.startx:
    04/02/2013 19:30:21.580 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:23.586 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:25.592 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:27.597 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:29.602 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    Thanks

Maybe you are looking for