X11 and Yamaha RX-V663

If you have both the new X11 voice control remote AND a Yamaha RX-V663 receiver and IF you have been successful in getting the X11 to both turn the receiver on and off AND control its vloume, PLEASE share with me your secret. I have been a programmer, but never an alchemist, so apparently I am ill-prepared to figure this out on my own. Perhaps it is just pre (or post) senile dementia. Thank you oin advance.

Hello!  Thank you for posting about this issue.  I raised this concern with the remote team.  The latest update is that the new codes are in the latest XR11 Voice Remote but have not reached warehouses for distribution yet.  The good news for existing users though is that the XR11 can be updated through the cable box as long as it's paired to the box.  You should see the updated code library in the next month (or so) which should allow for these missing commands to work with your AVR.  Thanks!

Similar Messages

  • I just bought apple tv and would like to set it up for my family for christmas.  i have a samsung tv and yamaha receiver.  where do i plug in  hdmi?  i assume into receiver but not sure.  also, plug is on back of receiver so much get behind all equipment

    i just bought apple tv and would like to set it up so it works right away.  i have samsung tv and yamaha receiver.  do i plug hdmi into receiver?  i assume plugs are in back of machined so i have to get behind all electronic equipment?  does that make sense?

    Welcome to the Apple Community.
    If your receiver is connected to your TV by HDMI and has a spare HDMI input port, then yes plug the HDMI cable from the Apple TV into your receiver.
    If that's not possible the HDMI lead from the Apple TV can go straight to the TV and you can connect the receiver to the Apple TV with an optical audio cable.

  • What is X11 and what does it do is it worth downloading i've just got a new Macbook air

    What is x11and what does it do i've just bought a Macbook Air note book and was wondering if this x11 is worth downloading

    In short, think of it as a graphical interface (e.g. window, menus, etc.) that can work across multiple systems. Applications written to use an X11 interface can run on any OS (Mac, Linux, Unix, Windows) with a suitable X11 server (such as XQuartz, mentioned above).
    The pros are that such an app can run anywhere. The cons being that it's kind of a lowest-common-denominator effect so it doesn't look like most native applications.
    One cool effect, though, is the remote nature of X11 - it's possible to run an application on a remote machine (over the LAN, or even over the internet) and have it display its output on your local X11 system, so your mouse clicks, keystrokes, etc. are transmitted over the wire, processed by the server, and the results displayed on your screen.
    As to whether it's worth it - there's no harm in downloading and installing it - it won't do anything unless any app you're running calls for X11, and any application that needs it will tell you so.

  • I downloaded gimp+x11 and message says can't uninstall -help please

    I downloaded gimp with X11 and want to uninstall it but an icon of a hard drive is in my sidebar under my mac hard drive icon  with  gimp X11 on it   and when I tried to drag it to the trash, a message popped up saying "can't = put it in trash because gimp cannot be uninstalled" . Please help me. I have an older version of adobe creative suite but wanted a simpler paint program to merge art and photos. I desperately want to uninstall gimp because it is not even as good as Tuxpaint which my granddaughter uses at school and which I realized has options of photo merging also and seems like a better designed program even if it is for kids. The only problem with Tuxpaint is enlarging its canvas or workspace window and I haven't yet found how to export it's images but my granddaughter loves it and will flip when she realizes she can load photos from her digital camera, I hope. My main problem though is getting rid of gimp.  Thank you for your help.

    It sounds like you have a disk image mounted. If that's so, unmount it by clicking the eject icon that appears when you mouse over it in the Finder sidebar, then move the image file (something like "Gimp.dmg") to the Trash.

  • How to input japanese text in x11 and openoffice

    I posted this question in the Mac OS section, but someone suggested that I post it here, too.
    I recently installed X11 on my computer to run OpenOffice.org. Unfortunately, I can't figure out how to switch between languages. Normally, I use the hot keys shift-cmnd-space to toggle between languages, but on X11, it won't allow me to do that.
    I don't know very much about X11, and I only downloaded it because I needed it to use OOo. OOo seems to have the easiest way to to input furigana characters when typing in Japanese, so it would make my life a lot easier if I could use OOo when creating Japanese documents. I'm not hellbent on using OOo, but the furigna input seemed easier to do than with Word (also, word has been crashing a lot lately, so I thought I'd try something else). If anyone out there uses a different program with furigana capabilities, I'd be open to hearing about that, too. Especially if it's easier to configure.
    Either way, I still need to figure out how to get X11 to input different languages. Can I use the katoeri program in X11 to input Japanese characters? Do I need to install something else? I'd also like to be able to use French, so if I need to do something special for that, please let me know how to do that, too.
    Also, if you couldn't tell, I don't know anything about computers, open source or codes. I don't have unix on my computer, but figured maybe someone here might be able to help me. Please be patient with my ignorance about all this stuff!
    Thanks in advance

    Either way, I still need to figure out how to get X11 to input different languages.
    Not really. You wouldn't use X11 for anything other than OO I think.
    Do I need to install something else?
    Yes, after some more research it seems you need something called kinput2. You can search this forum for Japanese. Here is one item of possible interest:
    http://discussions.apple.com/thread.jspa?messageID=5249892&#5249892
    I'd also like to be able to use French,
    No problem. You should be able to demonstrate that for yourself already, since it is the same as normal OS X apps. Do you know how to do that?
    I don't have unix on my computer
    Yes you do, OS X is based on Unix, and X11 requires it.
    http://www.apple.com/macosx/technology/unix.html

  • Benchmark ADC1,DAC1,G5 OS 10.4.6 and YAMAHA SYNTH S30 with Edirol UM-1EX

    I realy need help from anyone out there. Any help would be greatly appreciated.I connected ADC1 optical out to G5 opt-in from G5 opt-out to DAC1 opt-in and YAMAHA synth S30 MIDI I/O to G5 USB in by EDIROL UM-1EX MIDI-USB convertor. First the MIDI worked ,but Audio from Mic Pre to ADC1 to G5 from G5 to DAC1, I got repeat sound like a long delay sound,and now even the MIDI also stops working. I all the G5 I mentioned above is only one computer. I also ran Logic Audio MIDI setup assistent together with Driver for the EDIROL UM-1EX.
    Please note, UM-1 and UM-1EX use the same driver.
    THANKS.
    G 5   Mac OS X (10.4.6)  

  • Why are the colors in XTerm (x11) and Apple's terminal are different?

    Is there a way to fix this? I would like Apple's terminal to look like XTerm...
    the screenshot on the left is X11, and the screenshot on the right is Apple's terminal:

    Patrick Collins wrote:
    The "Pro" setting and the others are nothing more than settings for background and foreground text. Not the actual ANSI colors found when you do a colorized LS, or syntax highlighting in editors like vim.
    So, that is my question, why are these two terminals interpreting colors differently? Where can I FIX what it thinks "blue" is, etc?
    OK. I get it now. Apple's blue isn't blue enough I guess. Apparently people have been up in arms over this for years. I guess I missed it.
    This hack: http://ciaranwal.sh/2007/11/01/customising-colours-in-leopard-terminal
    is supposedly working in 10.6.4 now.

  • Using X11 and Fink/Fink Commander to run Compiz Fusion?

    Hi! One of my friends who loves Ubuntu Linux showed me some weird app called Compiz Fusion and im like ooo... i wanna play wiht that. And I remembered that OS X had a way of installing Linux apps.. so I downloaded the .tar of compiz fusion and I also downloaded and installed Fink and Fink Commander for OS X 10.5.2 but um.. yeah Im not very good with running terminal and junk.. I was following directions so I checked my list of app packages Fink could install in Terminal but either I didnt see compiz or it came up as a name I didnt understand.. does anyone here have experience running X11 and Fink? Or if you have a link where I can teach myself X11 and Fink that would work too! Thanks in advance!

    thepotter wrote:
    Whoa there etersoft, I don't want to get in a flame war.
    Not to worry. I would lose interest long before that happened
    I didn't knock OSX except to point out an actual bug with X11.
    But it is not a bug with OSX if some 3rd party tool is not compatible. It is a Mac, not a Linux workstation. If you want to run Linux on it, you can install Linux on it. The Mac has its own window manager designed to allow most X11 apps run and not look too bad alongside the Mac apps. It really is a design feature.
    Personally, I like both.
    I like UNIX - a lot. But I'm not too fond of Linux. It is for people who do want to build their own machines out of components. I'm a software person, not a hardware person. That doesn't interest me in the least. As a software person, I have little interest in developing software for Linux because every single Linux box is unique. That is a hassle I don't want to deal with. That is why I like MacOS X so much - all the power of Solaris with the beauty and easy-of-use of a Mac.
    In the past there were tons of issues doing linux installs, and linux was fairly labeled as finicky and difficult. By the same token, when I was trying to upgrade to Leopard recently, I got a warning that my only option was "erase and install".
    You lucked out. Erase and install is the best way to install a major OS upgrade.
    No other options, no explanation why, no suggestions for fixing it -- it was as mysterious as a Linux install from 1999, albeit with a much prettier formatting error message.
    In 1999, I didn't even get that much from Linux. The X server just crashed as soon as the install was done and took the boot partition with it - reinstall from scratch. I have VectorLinux running in Parallels, but I never use it.

  • OpenOffice, X11 and mail

    When I attempt to open a PPS email attachment X11 and OpenOffice are started and they do not open the attachment and also it takes awhile to close them. I am able to control click the attachment go to Other and select Power Point (it does not give me a choice to always open with Power Point) and I have to do this each time. How do I get rid of OpenOffice, I found X11 and dumped it, hopefully when I do this I will be able to open my attachments. Thanks for any help
    Larry
    Wasn’t quit sure which category to post this in.

    tony,
    I'm not sure that OpenOffice uses your system fonts directly (could be wrong), but I know NeoOffice/J does and I'm not seeing the problem you describe.
    Lee C
    "The early bird may get the worm but the second mouse gets the cheese." -- Willie Nelson
    See the article Backup::Restore.

  • HT1338 x11 and x quartz launches and quits immediately.

    I am AFNI for fMRI analysis.When I launch terminal and type in afni a message appears showing instalizing x11 and nothing happens.When I attempt to manually launch x11 or x quartz the program quits immediately.I have reinstalled x quartz and same is continuing.Can someone please help as I am stuck .

    I am not sure whether is this the right way to communicate to a forum. I am just doing cut and paste as appears on console(Please I am a computer illiterate hope you undersatnd) .
    1) 04/02/2013 18:40:09.150 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:40:30.677 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:40:52.032 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:41:13.302 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:41:34.669 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:41:56.306 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:42:17.702 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:42:39.043 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:43:00.442 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:43:22.056 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:43:43.468 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:44:04.878 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:44:26.257 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:44:47.894 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:45:09.582 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:45:31.056 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:45:52.646 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:46:14.259 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:46:35.691 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:46:57.086 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:47:18.525 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:47:40.147 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:48:01.484 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:48:22.944 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:48:44.297 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:49:05.956 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:49:27.337 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:49:48.766 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:50:10.223 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:50:32.251 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:50:53.902 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:51:15.359 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:51:36.783 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:51:58.409 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:52:19.814 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:52:41.237 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:53:02.525 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:53:24.001 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:53:45.459 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:54:07.023 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:54:28.511 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:54:50.030 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:55:11.478 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:55:32.853 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:55:58.190 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:56:19.102 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:56:40.717 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:57:02.559 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:57:24.329 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:57:46.475 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:58:08.282 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:58:29.565 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:58:50.827 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:59:12.539 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:59:36.265 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 18:59:58.168 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:00:19.581 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:00:40.879 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:01:02.157 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:01:23.880 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:01:45.141 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:02:06.422 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:02:27.979 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:02:49.850 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:03:11.121 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:03:32.428 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:03:54.964 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:04:16.783 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:04:38.134 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:04:59.486 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:05:21.160 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:05:42.470 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:06:03.826 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:06:25.199 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:06:46.807 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:07:08.170 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:07:29.525 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:07:50.876 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:08:12.768 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:08:34.110 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:08:55.371 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:09:16.646 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:09:38.408 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:09:59.673 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:10:20.998 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:10:42.727 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:11:04.489 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:11:26.340 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:11:47.665 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:12:08.973 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:12:30.811 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:12:52.417 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:13:13.777 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:13:35.067 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:13:56.683 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:14:18.149 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:14:39.756 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:15:01.201 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:15:22.815 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:15:44.163 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:16:05.472 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:16:26.753 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:16:48.455 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:17:09.735 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:17:31.122 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:17:52.390 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:18:10.044 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:18:31.405 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:18:52.676 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:19:14.076 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:19:35.353 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:19:56.681 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:20:17.949 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:20:39.564 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:21:00.865 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:21:22.176 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:21:43.448 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:22:05.113 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:22:26.411 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:22:47.718 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:23:09.031 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:23:30.637 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:23:51.913 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:24:13.183 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:24:34.464 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:24:56.098 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:25:17.382 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    2)
    04/02/2013 19:25:19.381 org.macosforge.xquartz.startx:
    04/02/2013 19:25:21.384 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:23.389 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:25.394 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:27.400 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:29.403 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:31.408 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:33.412 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:35.417 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:37.422 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:38.426 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:38.426 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:25:38.426 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:25:38.426 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:25:38.433 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:25:38.436 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:38.653 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:25:38.682 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.65853 does not exist
    04/02/2013 19:25:38.722 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:25:38.744 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:25:38.758 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:25:38.763 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:25:38.774 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:25:40.763 org.macosforge.xquartz.startx:
    04/02/2013 19:25:42.766 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:44.770 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:46.775 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:48.780 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:50.784 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:52.790 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:54.795 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:56.800 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:58.805 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:58.913 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:25:59.808 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:25:59.808 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:25:59.808 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:25:59.808 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: /opt/X11/bin/xinit: server error
    04/02/2013 19:25:59.844 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:25:59.844 org.macosforge.xquartz.startx: /opt/X11/bin/xinit:
    04/02/2013 19:26:00.041 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:26:00.058 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66010 does not exist
    04/02/2013 19:26:00.086 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:26:00.094 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:26:00.113 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:26:00.120 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:26:00.198 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:26:02.112 org.macosforge.xquartz.startx:
    04/02/2013 19:26:04.116 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:06.120 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:08.125 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:10.130 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:12.136 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:14.140 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:16.145 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:18.149 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:20.154 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:20.298 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:26:21.161 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:21.161 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:26:21.161 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:26:21.161 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:26:21.505 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:26:21.507 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:21.674 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:26:21.714 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66165 does not exist
    04/02/2013 19:26:21.739 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:26:21.746 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:26:21.761 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:26:21.766 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:26:21.811 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:26:23.764 org.macosforge.xquartz.startx:
    04/02/2013 19:26:25.767 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:27.773 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:29.778 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:31.782 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:33.786 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:35.791 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:37.795 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:39.801 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:41.804 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:41.859 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:26:42.807 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:42.807 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:26:42.807 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:26:42.807 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections /opt/X11/bin/xinit: server error
    04/02/2013 19:26:42.832 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:26:42.836 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:43.017 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:26:43.055 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66320 does not exist
    04/02/2013 19:26:43.088 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:26:43.096 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:26:43.123 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:26:43.134 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:26:43.165 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:26:45.119 org.macosforge.xquartz.startx:
    04/02/2013 19:26:47.122 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:49.128 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:51.132 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:53.137 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:55.143 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:57.148 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:26:59.153 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:01.158 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:03.163 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:03.353 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:27:04.166 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:04.166 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:27:04.166 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:27:04.166 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:27:04.173 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:27:04.176 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:04.384 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:27:04.406 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66476 does not exist
    04/02/2013 19:27:04.435 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:27:04.446 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:27:04.481 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:27:04.500 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:27:04.515 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:27:06.479 org.macosforge.xquartz.startx:
    04/02/2013 19:27:08.481 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:10.486 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:12.492 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:14.497 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:16.503 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:18.507 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:20.511 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:22.516 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:24.521 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:24.620 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:27:25.524 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:25.524 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:27:25.524 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:27:25.524 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections /opt/X11/bin/xinit: server error
    04/02/2013 19:27:25.531 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:27:25.534 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:25.685 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:27:25.700 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66631 does not exist
    04/02/2013 19:27:25.724 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:27:25.735 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:27:25.748 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:27:25.755 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:27:25.766 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:27:27.753 org.macosforge.xquartz.startx:
    04/02/2013 19:27:29.756 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:31.762 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:33.767 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:35.772 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:37.777 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:39.782 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:41.788 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:43.793 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:45.799 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:45.923 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:27:46.803 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:46.803 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:27:46.803 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:27:46.803 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:27:46.810 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:27:46.836 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:47.045 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:27:47.128 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66786 does not exist
    04/02/2013 19:27:47.163 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:27:47.169 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:27:47.184 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:27:47.192 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:27:47.205 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:27:49.188 org.macosforge.xquartz.startx:
    04/02/2013 19:27:51.191 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:53.197 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:55.202 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:57.207 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:27:59.212 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:01.216 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:03.222 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:05.227 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:07.232 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:08.235 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:08.235 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:28:08.235 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:28:08.235 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:28:08.579 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:28:08.595 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:08.744 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:28:08.757 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.66949 does not exist
    04/02/2013 19:28:08.781 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:28:08.789 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:28:08.802 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:28:08.807 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:28:08.819 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:28:10.808 org.macosforge.xquartz.startx:
    04/02/2013 19:28:12.811 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:14.816 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:16.821 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:18.825 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:20.830 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:22.836 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:24.840 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:26.846 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:28.851 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:29.855 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:29.855 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:28:29.855 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:28:29.855 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:28:29.862 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:28:29.865 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:30.076 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:28:30.113 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.67104 does not exist
    04/02/2013 19:28:30.143 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:28:30.232 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:28:30.246 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:28:30.251 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:28:30.264 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:28:32.251 org.macosforge.xquartz.startx:
    04/02/2013 19:28:34.254 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:36.259 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:38.264 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:40.269 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:42.274 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:44.279 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:46.292 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:48.296 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:50.300 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:50.349 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:28:51.303 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:51.303 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:28:51.303 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:28:51.303 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:28:51.310 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:28:51.312 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:51.530 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:28:51.552 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.67260 does not exist
    04/02/2013 19:28:51.583 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:28:51.603 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:28:51.642 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:28:51.646 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:28:51.670 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:28:53.646 org.macosforge.xquartz.startx:
    04/02/2013 19:28:55.649 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:57.654 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:28:59.659 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:01.663 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:03.669 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:05.673 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:07.679 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:09.684 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:11.689 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:11.737 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:29:12.693 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:12.694 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections /opt/X11/bin/xinit: giving up
    04/02/2013 19:29:12.694 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:29:12.694 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:29:12.702 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:29:12.705 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:12.899 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:29:12.934 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.67416 does not exist
    04/02/2013 19:29:12.966 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:29:12.979 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:29:13.064 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:29:13.069 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:29:13.094 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:29:15.069 org.macosforge.xquartz.startx:
    04/02/2013 19:29:17.072 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:19.077 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:21.082 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:23.086 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:25.092 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:27.097 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:29.103 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:31.108 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:33.113 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:33.212 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:29:34.117 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:34.117 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:29:34.117 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:29:34.117 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections /opt/X11/bin/xinit: server error
    04/02/2013 19:29:34.460 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:29:34.464 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:34.621 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:29:34.644 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.67571 does not exist
    04/02/2013 19:29:34.668 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:29:34.675 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:29:34.689 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:29:34.694 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:29:34.707 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:29:36.694 org.macosforge.xquartz.startx:
    04/02/2013 19:29:38.697 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:40.703 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:42.708 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:44.713 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:46.718 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:48.723 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:50.728 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:52.739 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:54.744 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:54.809 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:29:55.747 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:29:55.747 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:29:55.747 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:29:55.748 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:29:55.757 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:29:55.757 org.macosforge.xquartz.startx: /opt/X11/bin/xinit:
    04/02/2013 19:29:55.970 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:29:56.033 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.67726 does not exist
    04/02/2013 19:29:56.129 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:29:56.135 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:29:56.151 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:29:56.156 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:29:56.167 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:29:58.155 org.macosforge.xquartz.startx:
    04/02/2013 19:30:00.158 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:02.163 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:04.168 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:06.173 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:08.177 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:10.183 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:12.187 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:14.193 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:16.197 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:16.322 org.macosforge.xquartz.X11.stub: Xquartz: bootstrap_look_up(): Unknown service name
    04/02/2013 19:30:17.201 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:17.201 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: giving up
    04/02/2013 19:30:17.201 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: unable to connect to X server: Operation timed out
    04/02/2013 19:30:17.201 org.macosforge.xquartz.startx: /opt/X11/bin/xinit: server error
    04/02/2013 19:30:17.208 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections xauth: (argv):1:  bad display name "haris-imac:0" in "remove" command
    04/02/2013 19:30:17.211 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:17.513 defaults:
    The domain/default pair of (/Users/harigopal/Library/Preferences/org.macosforge.xquartz.X11.plist, dpi) does not exist
    04/02/2013 19:30:17.527 org.macosforge.xquartz.startx: xauth:  file /Users/harigopal/.serverauth.67883 does not exist
    04/02/2013 19:30:17.551 org.macosforge.xquartz.startx: xauth: (argv):1:  bad display name "haris-imac:0" in "list" command
    04/02/2013 19:30:17.559 org.macosforge.xquartz.startx: xauth: (stdin):1:  bad display name "haris-imac:0" in "add" command
    04/02/2013 19:30:17.573 org.macosforge.xquartz.X11.stub: Xquartz: Unable to locate waiting server: org.macosforge.xquartz.X11
    04/02/2013 19:30:17.578 org.macosforge.xquartz.X11.stub: Xquartz: Starting X server: /Applications/Utilities/XQuartz.app/Contents/MacOS/X11 --listenonly
    04/02/2013 19:30:17.589 org.macosforge.xquartz.startx: /Users/harigopal/.bash_profile: line 1: .bash_profile: No such file or directory
    04/02/2013 19:30:19.577 org.macosforge.xquartz.startx:
    04/02/2013 19:30:21.580 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:23.586 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:25.592 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:27.597 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    04/02/2013 19:30:29.602 org.macosforge.xquartz.startx: waiting for X server to begin accepting connections
    Thanks

  • X11 and Matlab problems

    I've been trying to install Matlab on my Powerbook, 10.4.11.
    1) I insert the Matlab CD, start the installation, and it tells me I need to have X11 to run Matlab.
    2) I insert the CD's that came with the Powerbook to install X11. I open the XCode tools folder, open the packages folder, and double-click on the X11SDK.pkg icon. It begins the X11 installation process. Mere seconds into the installation, it quits with an unnamed error.
    3) I download X11 from download.com and attempt to install that. It tells me there is already a newer version of X11 on my computer.
    4) I insert the Matlab CD and get the same error about not having X11 and needing it to run Matlab, but install anyway.
    5) I attempt to open Matlab after installation and nothing happens.
    6) I download a newer version of X11 from download.com and I'm still told that a newer version is on my computer.
    7) I attempt to use finder and spotlight to find X11 on my computer with no luck.
    8) I install XCode (hey, it starts with the same letter as X11 and is in the same folder, maybe it'll help!) because I'm getting desperate.
    9) I attempt to install X11 again, getting the same error during the installation.
    10) I bang my head on the wall until I realize that the friendly folks at Apple Discussions will probably have some insight.
    Thanks much!

    fabina12 wrote:
    I've been trying to install Matlab on my Powerbook, 10.4.11....I insert the CD's that came with the Powerbook to install X11...
    So, did your Powerbook come with 10.4 on CD (DVD) or an older version of OS X?
    I think you should boot from the OS X 10.4 installer disc and select Custom Install to select the optional X11 installation package from there. I am not sure if it is safe to install these system files when you are running from that booted system. In any case, maybe you need to restart for the new installation of X11 to work.
    You only need the X11 SDK and Developer Tools (XCode) to compile and build X11 applications from source code, like some of the GNU apps from the Fink project.
    (Not sure if Matlab needs the SDK/XCode Tools or not, unless maybe you are using m-file stand-alone application compiler, or if it uses its own compiler?)

  • X11 and Darwine

    I am trying to use darwine on my macbook 2.0ghz, and when I try to launch an application, it tells me that I do not have X11 installed. I went to Apple's site and downloaded the newest X11 package, but it will not let me install it saying "a newer version is already installed on your system". I looked in Library/Reciepts, and there is nothing relating to X11, and a spotlight search, and looking in Application/Ulitities did no good. Is there a way to override the install, or am I doing something else wrong? thanks!

    Which packages on the DVD are needed to install X11? Most of my Xserves have only CD drives, so they didn't get X11 when I installed 10.4 on them. Hopefully it's just a matter of copying packages over to each system and installing them.

  • X11 and Remote KDE desktop

    I have started using my Mac for Unix systems administration using X11 and XDMCP (??) to a local linux box running KDE. I start X with -query a.b.c.d and running fullscreen I get a nice fullscreen desktop login. Everything was working fine until I realised that I was still running the Panther version of X11 on my Tiger system. I have upgraded from the install CD and now have a minor but impossible problem.
    Everything works as before and I can login to the box. I open a Konsole session on the KDE desktop and suddenly discover that the "e" key on my keyboard has become a backspace key!!! Every other key seems to work fine!!
    I cannot figure out what is causing this and how to fix it any and all advice/suggestions would be hugely appreciated.
    Thanks,
    Adrian

    Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
    Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
    Why you would use one over the other depends on your requirements.
    Blog: www.danielclasson.com/blog |
    LinkedIn:
    Daniel Classon | Twitter: @danielclasson

  • X11 and security

    Back in the "good 'ol days" (before internet crime became so prevalent) I used to set up X Windows on a host of different systems, run 1 X11 app on one machine and had it display on another, etc. etc. etc. (all that stuff that made X11 great).
    Nowadays I've heard of so many security "loopholes" with X11 that I'm almost afraid to run it. I'm a software developer but NOT a security expert (more like security dimwit). Our current cross platform development environment has some Windows XP systems, FreeBSD, Linux, Solaris, and of course, several OS X systems on it (ranging from Panther to Leopard). We use Cygwin on the Windoze machines FWIW.
    Back in the "good 'ol days" we used to use xhost+ to allow access to all machines, and copy files between systems using rcp. Nowadays, xhost+ is gone and we use scp or rsync for file transfer, and we don't even bother mapping the display of a program running on one system to the X display of another.
    My question is this: Is there a way that I can securely map a display from one system to another? Allow me to provide a scenario:
    1. I compile and test something on OS X, and it works.
    2. I now want to port, compile, and test it on one of the non-OS X systems, but instead of doing an scp or rsync of the code and then moving to the actual machine, I would like to copy the code over with scp or rsync and then map the display from the target machine to the OS X machine, but DO IT SECURELY.
    I know there are ways to do this via ssh, but they seem script/terminal oriented (or possibly I don't understand the process fully). What's the best and easiest way to run X11 AND remain secure?
    Thanks in advance,
    OSX Fan

    Dear Bob,
    sorry if the format of this posting may not be correct (it is more of a personal request for help from help) but I need someone who is rather skilled on security and Windows to look into my note below.
    I have had horrible security experiences with PCs which I needed to use for my job as XP Home Edition and now that I came back to Mac the same criminals who stole personal and financial info from me from two XP platforms, managed to bother me even on Leopard, of course, using a basic Microsoft server connection. FYI I have MAC addresses and IPs which are connected to the same peopole who were reported last year to the authorities.
    I'll discuss the problem with a technician if there actually was a security breach but my computer has been self-'copying' important files, limiting my permissions periodically and I keep finding changes in my preferences. There definitely is an intrusion and it happens through a responder (MDS?), but I don't seem to find a final way to eliminate it. Repairing prefs and fsck did help a bit but did not block the responder. How can someone break in without access to my complicated passwords?
    I am a user, not a programmer, but I consider myself very proficient in troubleshooting anything with system 10.X but this one problem just reminds me of previous DOS XP intrusion by professional thieves.
    Am I supposed to have all these processes even if I am directly connected to a cable modem via router?
    Active Memory: 375.10 MB
    Free Memory: 1.46 GB
    Wired Memory: 139.80 MB
    Used Memory: 547.96 MB
    Inactive Memory: 33.05 MB
    Total VM: 32.91 GB
    Number of processes: 58
    ID Process Name User CPU RSIZE VSIZE
    0 kernel_task root 3.3 100.92 MB 156.52 MB
    1 launchd root 0.0 588.00 KB 18.65 MB
    10 kextd root 0.0 1.22 MB 586.16 MB
    11 notifyd root 0.0 484.00 KB 586.15 MB
    12 syslogd root 0.0 792.00 KB 587.61 MB
    14 ntpd root 0.0 872.00 KB 586.11 MB
    15 cron root 0.0 656.00 KB 586.66 MB
    16 update root 0.0 296.00 KB 585.54 MB
    17 SystemStarter root 0.0 680.00 KB 585.58 MB
    20 securityd root 0.0 1.63 MB 587.28 MB
    22 nfsd root 0.0 816.00 KB 590.73 MB
    23 mds root 0.0 22.52 MB 714.77 MB
    24 mDNSResponder _mdnsrespo 0.0 1.32 MB 587.47 MB
    25 loginwindow adamjweber 0.0 5.29 MB 753.53 MB
    26 KernelEventAgent root 0.0 660.00 KB 585.65 MB
    28 hidd root 0.0 608.00 KB 586.07 MB
    29 fseventsd root 0.0 1.20 MB 592.51 MB
    31 dynamic_pager root 0.0 620.00 KB 585.58 MB
    33 diskarbitrationd root 0.0 1.00 MB 585.67 MB
    34 DirectoryService root 0.0 3.34 MB 588.77 MB
    36 configd root 0.0 1.96 MB 587.17 MB
    39 autofsd root 0.0 688.00 KB 585.59 MB
    40 socketfilterfw root 0.0 1.52 MB 585.91 MB
    43 distnoted daemon 0.0 752.00 KB 585.56 MB
    46 coreservicesd root 0.0 17.39 MB 607.14 MB
    47 blued root 0.0 2.13 MB 28.23 MB
    52 rpc.lockd root 0.0 388.00 KB 585.65 MB
    54 rpc.statd root 0.0 368.00 KB 841.57 MB
    55 portmap daemon 0.0 372.00 KB 17.53 MB
    56 WindowServer _windowser 22.8 50.71 MB 259.15 MB
    57 rpc.lockd root 0.0 232.00 KB 585.66 MB
    58 rpc.rquotad root 0.0 372.00 KB 586.08 MB
    78 coreaudiod root 0.0 944.00 KB 586.25 MB
    82 qmasterd root 0.0 3.83 MB 602.01 MB
    83 qmasterd root 0.0 4.04 MB 602.08 MB
    86 diskimages-helpe root 0.2 3.05 MB 605.51 MB
    90 hdiejectd root 0.0 1.01 MB 585.60 MB
    97 launchd adamjweber 0.0 536.00 KB 17.65 MB
    102 Folder Actions Dispatcher adamjweber 0.0 2.79 MB 747.13 MB
    103 AirPort Base Station Agen adamjweber 0.0 2.96 MB 211.33 MB
    107 Spotlight adamjweber 0.0 6.04 MB 749.68 MB
    108 UserEventAgent adamjweber 0.0 2.02 MB 588.52 MB
    110 pboard adamjweber 0.0 592.00 KB 586.60 MB
    111 ATSServer adamjweber 0.0 4.42 MB 645.59 MB
    112 Dock adamjweber 0.0 15.17 MB 782.26 MB
    115 SystemUIServer adamjweber 0.0 13.68 MB 798.18 MB
    116 Finder adamjweber 0.0 61.76 MB 912.06 MB
    128 KUC adamjweber 0.0 5.93 MB 798.94 MB
    129 RealPlayer Downloader Age adamjweber 0.1 2.71 MB 747.29 MB
    130 RPDLAgentHelperD adamjweber 0.0 12.87 MB 590.25 MB
    134 iChatAgent adamjweber 0.0 2.68 MB 726.63 MB
    140 Firefox adamjweber 0.5 36.58 MB 850.14 MB
    165 mdworker nobody 0.0 2.86 MB 599.05 MB
    168 mdworker adamjweber 0.0 4.16 MB 632.46 MB
    220 Activity Monitor adamjweber 23.3 21.86 MB 857.06 MB
    221 pmTool root 2.2 1.37 MB 595.65 MB
    232 authorizationhos root 0.0 1.52 MB 596.75 MB
    233 SecurityAgent _securitya 0.0 8.58 MB 797.55 MB
    I truly thank Bob or anyone else in advance who can spot a definite intrusion, so that I can take care of this and with the authorities.
    Best regards,
    SMarescotti

  • Poor 2D-Performance in Angband with X11 and radeon [SOLVED]

    Hello,
    I switched from catalyst to the open source radeon driver with kernel 3.11 the first time, having an HD 6950. When I tryed to play Angband (which I really like) the performance was very poor and laggy. So I edited my /etc/X11/xorg.conf.d/20-radeon.conf just like it says in the wiki using glamor:
    Section "Module"
    Load "dri2"
    Load "glamor-egl"
    EndSection
    Section "Device"
    Identifier "Radeon"
    Driver "radeon"
    Option "AccelMethod" "glamor"
    EndSection
    That did the trick. But now that I did a fresh install of Arch it's not working anymore. Even with the glamor settings the game is slow and laggy. I've also tried EXA making it look like this:
    Section "Device"
    Identifier "Radeon"
    Driver "radeon"
    Option "AccelMethod" "EXA"
    Option "EXAVSync" "on"
    EndSection
    Using EXA doesn't change anything either. The game runs fine in text-mode but with X11 it's laggy.
    What I've tried however is this (without any luck):
    - mesa-git 10.1 from AUR
    - glamor-egl-git from AUR
    Am I missing something here? I'd really appreciate it if you have an idea as to why these settings don't seem to take an effect on Angband anymore.
    Greets
    A
    Last edited by andmars (2013-12-05 07:37:13)

    Hi,
    it looks like there has been a change in the naming convention. In order to have the glamor module loaded correctly you must not write:
    Load "glamor-egl"
    but
    Load "glamoregl"
    The Wiki entry has been changed accordingly. Now it's happily playing Angband for me :-)
    Greets
    A
    Last edited by andmars (2013-12-05 08:05:14)

Maybe you are looking for

  • Ship to party and Sold to Party

    SD Gurus, I am new to SD, I have a new customer, that will various ship to party. What is the process to set up ship to parties. I know I have to set-up custmer via XD01, then partner functions select the ship to party? Where do i create the ship to

  • NLABView 7.1 and 8.5 not working correctly without Admin Rights

    I am working with a product call PREMISE which uses both the NLABView 7.1 and 8.5 software/dll/activeX components. The issue that I am having is caused by the user account in which we are running the software is not and ADMINISTRATOR on the computer.

  • Lenovo X1 Faulty Trackpad?

    Hi everyone.  I was hoping someone might be able to help me out with a problem that I've been seeing on my Lenovo X1.   From time to time, the pad will stop responding properly. The cursor flashes with the busy icon and my cursor goes wild. It lags b

  • Purchase error on iTunes

    How can I correct a purchase made in error at iTunes

  • Testing Windows 7 on TP R51

    I installed my beta copy of Windows 7 on my Thinkpad R51 1836-BDU. Everything works great except for the wireless card and video card. I am downloading the supplied drivers from the Lenovo site now, but the video - as far as I can tell - is just flat