X11 gedit xterm numeric keypad stuck in numeric mode
Ok I tried googling and i tried searching this forum and if the answer is here I'm staring at it without seeing it.
I've got two PC's in this room, one running arch linux the other running centos 5.
Both run gnome and both have the same keyboard definition in /etc/X11/xorg.conf
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "uk"
Option "XkbVariant" ""
EndSection
On the centos system editors like gedit recognise my num lock key and allow me to choose whether "numeric keypad 1" types a '1' or goes to the end of the line. On the arch system I have no such luck numeric keypad 1 ALWAYS types a 1 never mind whether the num lock light is on or not. And here's the best bit. Both machines are plugged into a belkin KVM switch so it's the same physical keyboard !!
OK I know there must be a config setting somewhere. Can someone put me out of my misery please !
I submitted a bug report on bugparade for this issue.
Similar Messages
-
My MacBook screen is stuck in "presentation" mode (I don't know the correct term) after using my Apple Mini DisplayPort to VGA Adapter - meaning the screen fonts and windows are larger than usual. How can I fix this? I've changed the display settings to modify it a little, but it still doesn't look right. I reinserted the adapter numerous times and restarted my computer, it still hasn't worked. Help!
Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".
Best. -
Gnome stuck in fallback mode - not recognizing nvidia drivers
Every time I start a gnome session it is stuck in fallback mode. Checking under System Settings > Details > Graphics I see that the Driver is listed as Unknown and Experience is Fallback. Forced Fallback Mode is OFF. I cannot get it to recognize the nvidia driver (I have also tried nouveau but it did not recognize that either). I have tried re-installing the nvidia driver and rebooting, but I can't seem to fix the problem . Here are the logs that I thought might be relevant. If you need to see anything else please let me know . Thanks.
inxi -Gx
Graphics: Card: NVIDIA GT216 [Quadro FX 880M] bus-ID: 01:00.0
X.org: 1.12.3 drivers: nvidia (unloaded: fbdev) Resolution: 132x96
Kernel if it matters:
Kernel~3.4.6-1-ARCH x86_64
Output of Xorg.0.log
1 [ 29.455]
2 X.Org X Server 1.12.3
3 Release Date: 2012-07-09
4 [ 29.455] X Protocol Version 11, Revision 0
5 [ 29.455] Build Operating System: Linux 3.4.4-3-ARCH x86_64
6 [ 29.455] Current Operating System: Linux pluto 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64
7 [ 29.455] Kernel command line: root=/dev/sda1 ro
8 [ 29.455] Build Date: 09 July 2012 03:59:39PM
9 [ 29.455]
10 [ 29.455] Current version of pixman: 0.26.2
11 [ 29.455] Before reporting problems, check http://wiki.x.org
12 to make sure that you have the latest version.
13 [ 29.455] Markers: (--) probed, (**) from config file, (==) default setting,
14 (++) from command line, (!!) notice, (II) informational,
15 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
16 [ 29.455] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 01:49:20 2012
17 [ 29.501] (==) Using config directory: "/etc/X11/xorg.conf.d"
18 [ 29.516] (==) No Layout section. Using the first Screen section.
19 [ 29.516] (==) No screen section available. Using defaults.
20 [ 29.516] (**) |-->Screen "Default Screen Section" (0)
21 [ 29.516] (**) | |-->Monitor "<default monitor>"
22 [ 29.517] (==) No monitor specified for screen "Default Screen Section".
23 Using a default monitor configuration.
24 [ 29.517] (==) Automatically adding devices
25 [ 29.517] (==) Automatically enabling devices
26 [ 29.554] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
27 [ 29.554] Entry deleted from font path.
28 [ 29.604] (==) FontPath set to:
29 /usr/share/fonts/misc/,
30 /usr/share/fonts/TTF/,
31 /usr/share/fonts/Type1/,
32 /usr/share/fonts/100dpi/,
33 /usr/share/fonts/75dpi/
34 [ 29.604] (==) ModulePath set to "/usr/lib/xorg/modules"
35 [ 29.604] (II) The server relies on udev to provide the list of input devices.
36 If no devices become available, reconfigure udev or disable AutoAddDevices.
37 [ 29.604] (II) Loader magic: 0x7c8b00
38 [ 29.604] (II) Module ABI versions:
39 [ 29.604] X.Org ANSI C Emulation: 0.4
40 [ 29.604] X.Org Video Driver: 12.0
41 [ 29.604] X.Org XInput driver : 16.0
42 [ 29.604] X.Org Server Extension : 6.0
43 [ 29.606] (--) PCI:*(0:1:0:0) 10de:0a3c:17aa:2145 rev 162, Mem @ 0xcc000000/16777216, 0xd0000000/268435456, 0xce000000/335544 32, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
44 [ 29.606] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
45 [ 29.606] (II) LoadModule: "extmod"
46 [ 29.620] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
47 [ 29.632] (II) Module extmod: vendor="X.Org Foundation"
48 [ 29.632] compiled for 1.12.3, module version = 1.0.0
49 [ 29.632] Module class: X.Org Server Extension
50 [ 29.632] ABI class: X.Org Server Extension, version 6.0
51 [ 29.632] (II) Loading extension MIT-SCREEN-SAVER
52 [ 29.632] (II) Loading extension XFree86-VidModeExtension
53 [ 29.632] (II) Loading extension XFree86-DGA
54 [ 29.632] (II) Loading extension DPMS
55 [ 29.632] (II) Loading extension XVideo
56 [ 29.632] (II) Loading extension XVideo-MotionCompensation
57 [ 29.632] (II) Loading extension X-Resource
58 [ 29.632] (II) LoadModule: "dbe"
59 [ 29.632] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
60 [ 29.640] (II) Module dbe: vendor="X.Org Foundation"
61 [ 29.640] compiled for 1.12.3, module version = 1.0.0
62 [ 29.640] Module class: X.Org Server Extension
63 [ 29.640] ABI class: X.Org Server Extension, version 6.0
64 [ 29.640] (II) Loading extension DOUBLE-BUFFER
65 [ 29.640] (II) LoadModule: "glx"
66 [ 29.641] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
67 [ 30.719] (II) Module glx: vendor="NVIDIA Corporation"
68 [ 30.719] compiled for 4.0.2, module version = 1.0.0
69 [ 30.719] Module class: X.Org Server Extension
70 [ 30.719] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012
71 [ 30.719] (II) Loading extension GLX
72 [ 30.719] (II) LoadModule: "record"
73 [ 30.720] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
74 [ 30.727] (II) Module record: vendor="X.Org Foundation"
75 [ 30.727] compiled for 1.12.3, module version = 1.13.0
76 [ 30.727] Module class: X.Org Server Extension
77 [ 30.727] ABI class: X.Org Server Extension, version 6.0
78 [ 30.727] (II) Loading extension RECORD
79 [ 30.727] (II) LoadModule: "dri"
80 [ 30.727] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
81 [ 30.747] (II) Module dri: vendor="X.Org Foundation"
82 [ 30.747] compiled for 1.12.3, module version = 1.0.0
83 [ 30.747] ABI class: X.Org Server Extension, version 6.0
84 [ 30.747] (II) Loading extension XFree86-DRI
85 [ 30.747] (II) LoadModule: "dri2"
86 [ 30.747] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
87 [ 30.751] (II) Module dri2: vendor="X.Org Foundation"
88 [ 30.751] compiled for 1.12.3, module version = 1.2.0
89 [ 30.751] ABI class: X.Org Server Extension, version 6.0
90 [ 30.751] (II) Loading extension DRI2
91 [ 30.751] (==) Matched nouveau as autoconfigured driver 0
92 [ 30.751] (==) Matched nvidia as autoconfigured driver 1
93 [ 30.751] (==) Matched nv as autoconfigured driver 2
94 [ 30.751] (==) Matched vesa as autoconfigured driver 3
95 [ 30.751] (==) Matched fbdev as autoconfigured driver 4
96 [ 30.751] (==) Assigned the driver to the xf86ConfigLayout
97 [ 30.751] (II) LoadModule: "nouveau"
98 [ 30.800] (WW) Warning, couldn't open module nouveau
99 [ 30.800] (II) UnloadModule: "nouveau"
100 [ 30.800] (II) Unloading nouveau
101 [ 30.800] (EE) Failed to load module "nouveau" (module does not exist, 0)
102 [ 30.800] (II) LoadModule: "nvidia"
103 [ 30.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
104 [ 30.902] (II) Module nvidia: vendor="NVIDIA Corporation"
105 [ 30.902] compiled for 4.0.2, module version = 1.0.0
106 [ 30.902] Module class: X.Org Video Driver
107 [ 30.942] (II) LoadModule: "nv"
108 [ 30.943] (WW) Warning, couldn't open module nv
109 [ 30.943] (II) UnloadModule: "nv"
110 [ 30.943] (II) Unloading nv
111 [ 30.943] (EE) Failed to load module "nv" (module does not exist, 0)
112 [ 30.943] (II) LoadModule: "vesa"
113 [ 30.943] (WW) Warning, couldn't open module vesa
114 [ 30.943] (II) UnloadModule: "vesa"
115 [ 30.943] (II) Unloading vesa
116 [ 30.943] (EE) Failed to load module "vesa" (module does not exist, 0)
117 [ 30.943] (II) LoadModule: "fbdev"
118 [ 30.943] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
119 [ 30.957] (II) Module fbdev: vendor="X.Org Foundation"
120 [ 30.957] compiled for 1.12.2, module version = 0.4.3
121 [ 30.957] Module class: X.Org Video Driver
122 [ 30.957] ABI class: X.Org Video Driver, version 12.0
123 [ 30.957] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 16:04:53 PDT 2012
124 [ 30.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
125 [ 30.958] (II) FBDEV: driver for framebuffer: fbdev
126 [ 30.958] (++) using VT number 7
127
128 [ 30.964] (II) Loading sub module "fb"
129 [ 30.964] (II) LoadModule: "fb"
130 [ 30.964] (II) Loading /usr/lib/xorg/modules/libfb.so
131 [ 30.979] (II) Module fb: vendor="X.Org Foundation"
132 [ 30.979] compiled for 1.12.3, module version = 1.0.0
133 [ 30.979] ABI class: X.Org ANSI C Emulation, version 0.4
134 [ 30.980] (II) Loading sub module "wfb"
135 [ 30.980] (II) LoadModule: "wfb"
136 [ 30.980] (II) Loading /usr/lib/xorg/modules/libwfb.so
137 [ 30.988] (II) Module wfb: vendor="X.Org Foundation"
138 [ 30.988] compiled for 1.12.3, module version = 1.0.0
139 [ 30.988] ABI class: X.Org ANSI C Emulation, version 0.4
140 [ 30.988] (II) Loading sub module "ramdac"
141 [ 30.988] (II) LoadModule: "ramdac"
142 [ 30.988] (II) Module "ramdac" already built-in
143 [ 31.014] (WW) Falling back to old probe method for fbdev
144 [ 31.014] (II) Loading sub module "fbdevhw"
145 [ 31.014] (II) LoadModule: "fbdevhw"
146 [ 31.015] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
147 [ 31.031] (II) Module fbdevhw: vendor="X.Org Foundation"
148 [ 31.031] compiled for 1.12.3, module version = 0.0.2
149 [ 31.031] ABI class: X.Org Video Driver, version 12.0
150 [ 31.031] (EE) open /dev/fb0: No such file or directory
151 [ 31.031] (II) NVIDIA(0): Creating default Display subsection in Screen section
152 "Default Screen Section" for depth/fbbpp 24/32
153 [ 31.031] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
154 [ 31.031] (==) NVIDIA(0): RGB weight 888
155 [ 31.031] (==) NVIDIA(0): Default visual is TrueColor
156 [ 31.031] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
157 [ 31.031] (**) NVIDIA(0): Enabling 2D acceleration
158 [ 32.658] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
159 [ 32.658] (II) NVIDIA(GPU-0): 3D Vision stereo.
160 [ 32.661] (II) NVIDIA(0): NVIDIA GPU Quadro FX 880M (GT216GL) at PCI:1:0:0 (GPU-0)
161 [ 32.662] (--) NVIDIA(0): Memory: 1048576 kBytes
162 [ 32.662] (--) NVIDIA(0): VideoBIOS: 70.16.5f.00.0a
163 [ 32.662] (II) NVIDIA(0): Detected PCI Express Link width: 16X
164 [ 32.662] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
165 [ 32.673] (--) NVIDIA(0): Valid display device(s) on Quadro FX 880M at PCI:1:0:0
166 [ 32.673] (--) NVIDIA(0): CRT-0
167 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0) (connected)
168 [ 32.673] (--) NVIDIA(0): DFP-1
169 [ 32.673] (--) NVIDIA(0): DFP-2
170 [ 32.673] (--) NVIDIA(0): DFP-3
171 [ 32.673] (--) NVIDIA(0): DFP-4
172 [ 32.673] (--) NVIDIA(0): DFP-5
173 [ 32.673] (--) NVIDIA(0): DFP-6
174 [ 32.673] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
175 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): 330.0 MHz maximum pixel clock
176 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): Internal Dual Link LVDS
177 [ 32.673] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
178 [ 32.673] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
179 [ 32.673] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
180 [ 32.673] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
181 [ 32.673] (--) NVIDIA(0): DFP-3: 165.0 MHz maximum pixel clock
182 [ 32.673] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS
183 [ 32.673] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
184 [ 32.673] (--) NVIDIA(0): DFP-4: Internal DisplayPort
185 [ 32.673] (--) NVIDIA(0): DFP-5: 480.0 MHz maximum pixel clock
186 [ 32.673] (--) NVIDIA(0): DFP-5: Internal DisplayPort
187 [ 32.673] (--) NVIDIA(0): DFP-6: 480.0 MHz maximum pixel clock
188 [ 32.673] (--) NVIDIA(0): DFP-6: Internal DisplayPort
189 [ 32.673] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
190 [ 32.673] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
191 [ 32.674] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
192 [ 32.674] (==) NVIDIA(0):
193 [ 32.674] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
194 [ 32.674] (==) NVIDIA(0): will be used as the requested mode.
195 [ 32.674] (==) NVIDIA(0):
196 [ 32.675] (II) NVIDIA(0): Validated modes:
197 [ 32.675] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
198 [ 32.675] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
199 [ 33.738] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
200 [ 33.739] (--) NVIDIA(0): option
201 [ 33.739] (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
202 [ 33.739] (WW) NVIDIA(0): UBB.
203 [ 33.739] (II) UnloadModule: "fbdev"
204 [ 33.739] (II) Unloading fbdev
205 [ 33.739] (II) UnloadSubModule: "fbdevhw"
206 [ 33.739] (II) Unloading fbdevhw
207 [ 33.739] (--) Depth 24 pixmap format is 32 bpp
208 [ 33.739] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
209 [ 33.744] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
210 [ 33.744] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
211 [ 33.744] (II) NVIDIA(0): configuration option may not be set correctly. When the
212 [ 33.744] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
213 [ 33.744] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
214 [ 33.744] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
215 [ 33.744] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
216 [ 33.744] (II) NVIDIA(0): Config Options in the README.
217 [ 33.747] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
218 [ 34.063] (II) Loading extension NV-GLX
219 [ 34.122] (==) NVIDIA(0): Disabling shared memory pixmaps
220 [ 34.122] (==) NVIDIA(0): Backing store disabled
221 [ 34.122] (==) NVIDIA(0): Silken mouse enabled
222 [ 34.122] (==) NVIDIA(0): DPMS enabled
223 [ 34.123] (II) Loading extension NV-CONTROL
224 [ 34.123] (II) Loading extension XINERAMA
225 [ 34.123] (II) Loading sub module "dri2"
226 [ 34.123] (II) LoadModule: "dri2"
227 [ 34.123] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
228 [ 34.123] (II) Module dri2: vendor="X.Org Foundation"
229 [ 34.123] compiled for 1.12.3, module version = 1.2.0
230 [ 34.123] ABI class: X.Org Server Extension, version 6.0
231 [ 34.123] (II) NVIDIA(0): [DRI2] Setup complete
232 [ 34.123] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
233 [ 34.123] (--) RandR disabled
234 [ 34.123] (II) Initializing built-in extension Generic Event Extension
235 [ 34.123] (II) Initializing built-in extension SHAPE
236 [ 34.123] (II) Initializing built-in extension MIT-SHM
237 [ 34.123] (II) Initializing built-in extension XInputExtension
238 [ 34.123] (II) Initializing built-in extension XTEST
239 [ 34.123] (II) Initializing built-in extension BIG-REQUESTS
240 [ 34.123] (II) Initializing built-in extension SYNC
241 [ 34.123] (II) Initializing built-in extension XKEYBOARD
242 [ 34.123] (II) Initializing built-in extension XC-MISC
243 [ 34.124] (II) Initializing built-in extension SECURITY
244 [ 34.124] (II) Initializing built-in extension XINERAMA
245 [ 34.124] (II) Initializing built-in extension XFIXES
246 [ 34.124] (II) Initializing built-in extension RENDER
247 [ 34.124] (II) Initializing built-in extension RANDR
248 [ 34.124] (II) Initializing built-in extension COMPOSITE
249 [ 34.124] (II) Initializing built-in extension DAMAGE
250 [ 34.126] (II) Initializing extension GLX
251 [ 34.689] (II) config/udev: Adding input device Power Button (/dev/input/event3)
252 [ 34.689] (**) Power Button: Applying InputClass "evdev keyboard catchall"
253 [ 34.689] (II) LoadModule: "evdev"
254 [ 34.689] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
255 [ 34.704] (II) Module evdev: vendor="X.Org Foundation"
256 [ 34.704] compiled for 1.12.3, module version = 2.7.1
257 [ 34.704] Module class: X.Org XInput Driver
258 [ 34.704] ABI class: X.Org XInput driver, version 16.0
259 [ 34.704] (II) Using input driver 'evdev' for 'Power Button'
260 [ 34.704] (**) Power Button: always reports core events
261 [ 34.704] (**) evdev: Power Button: Device: "/dev/input/event3"
262 [ 34.704] (--) evdev: Power Button: Vendor 0 Product 0x1
263 [ 34.704] (--) evdev: Power Button: Found keys
264 [ 34.704] (II) evdev: Power Button: Configuring as keyboard
265 [ 34.704] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
266 [ 34.704] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
267 [ 34.704] (**) Option "xkb_rules" "evdev"
268 [ 34.704] (**) Option "xkb_model" "evdev"
269 [ 34.704] (**) Option "xkb_layout" "us"
270 [ 34.727] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
271 [ 34.727] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
272 [ 34.727] (II) Using input driver 'evdev' for 'Video Bus'
273 [ 34.727] (**) Video Bus: always reports core events
274 [ 34.727] (**) evdev: Video Bus: Device: "/dev/input/event4"
275 [ 34.728] (--) evdev: Video Bus: Vendor 0 Product 0x6
276 [ 34.728] (--) evdev: Video Bus: Found keys
277 [ 34.728] (II) evdev: Video Bus: Configuring as keyboard
278 [ 34.728] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4/ev ent4"
279 [ 34.728] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
280 [ 34.728] (**) Option "xkb_rules" "evdev"
281 [ 34.728] (**) Option "xkb_model" "evdev"
282 [ 34.728] (**) Option "xkb_layout" "us"
283 [ 34.728] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
284 [ 34.728] (II) No input driver specified, ignoring this device.
285 [ 34.728] (II) This device may have been added with another device file.
286 [ 34.729] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
287 [ 34.729] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
288 [ 34.729] (II) Using input driver 'evdev' for 'Sleep Button'
289 [ 34.729] (**) Sleep Button: always reports core events
290 [ 34.729] (**) evdev: Sleep Button: Device: "/dev/input/event2"
291 [ 34.729] (--) evdev: Sleep Button: Vendor 0 Product 0x3
292 [ 34.729] (--) evdev: Sleep Button: Found keys
293 [ 34.729] (II) evdev: Sleep Button: Configuring as keyboard
294 [ 34.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
295 [ 34.729] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
296 [ 34.729] (**) Option "xkb_rules" "evdev"
297 [ 34.729] (**) Option "xkb_model" "evdev"
298 [ 34.729] (**) Option "xkb_layout" "us"
299 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
300 [ 34.730] (II) No input driver specified, ignoring this device.
301 [ 34.730] (II) This device may have been added with another device file.
302 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
303 [ 34.730] (II) No input driver specified, ignoring this device.
304 [ 34.730] (II) This device may have been added with another device file.
305 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
306 [ 34.731] (II) No input driver specified, ignoring this device.
307 [ 34.731] (II) This device may have been added with another device file.
308 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
309 [ 34.731] (II) No input driver specified, ignoring this device.
310 [ 34.731] (II) This device may have been added with another device file.
311 [ 34.732] (II) config/udev: Adding input device Integrated Camera (/dev/input/event6)
312 [ 34.732] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
313 [ 34.732] (II) Using input driver 'evdev' for 'Integrated Camera'
314 [ 34.732] (**) Integrated Camera: always reports core events
315 [ 34.732] (**) evdev: Integrated Camera: Device: "/dev/input/event6"
316 [ 34.732] (--) evdev: Integrated Camera: Vendor 0x17ef Product 0x480f
317 [ 34.732] (--) evdev: Integrated Camera: Found keys
318 [ 34.732] (II) evdev: Integrated Camera: Configuring as keyboard
319 [ 34.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input6/event6"
320 [ 34.732] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
321 [ 34.732] (**) Option "xkb_rules" "evdev"
322 [ 34.732] (**) Option "xkb_model" "evdev"
323 [ 34.732] (**) Option "xkb_layout" "us"
324 [ 34.732] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
325 [ 34.732] (II) No input driver specified, ignoring this device.
326 [ 34.732] (II) This device may have been added with another device file.
327 [ 34.733] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
328 [ 34.733] (II) No input driver specified, ignoring this device.
329 [ 34.733] (II) This device may have been added with another device file.
330 [ 34.733] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event11)
331 [ 34.733] (II) No input driver specified, ignoring this device.
332 [ 34.733] (II) This device may have been added with another device file.
333 [ 34.734] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event12)
334 [ 34.734] (II) No input driver specified, ignoring this device.
335 [ 34.734] (II) This device may have been added with another device file.
336 [ 34.734] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
337 [ 34.734] (II) No input driver specified, ignoring this device.
338 [ 34.734] (II) This device may have been added with another device file.
339 [ 34.735] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
340 [ 34.735] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
341 [ 34.735] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
342 [ 34.735] (**) AT Translated Set 2 keyboard: always reports core events
343 [ 34.735] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
344 [ 34.735] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
345 [ 34.735] (--) evdev: AT Translated Set 2 keyboard: Found keys
346 [ 34.735] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
347 [ 34.735] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
348 [ 34.735] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
349 [ 34.735] (**) Option "xkb_rules" "evdev"
350 [ 34.735] (**) Option "xkb_model" "evdev"
351 [ 34.735] (**) Option "xkb_layout" "us"
352 [ 34.736] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
353 [ 34.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
354 [ 34.736] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
355 [ 34.736] (II) LoadModule: "synaptics"
356 [ 34.736] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
357 [ 34.757] (II) Module synaptics: vendor="X.Org Foundation"
358 [ 34.757] compiled for 1.12.2, module version = 1.6.2
359 [ 34.757] Module class: X.Org XInput Driver
360 [ 34.757] ABI class: X.Org XInput driver, version 16.0
361 [ 34.757] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
362 [ 34.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
363 [ 34.757] (**) Option "Device" "/dev/input/event8"
364 [ 34.757] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
365 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
366 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
367 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
368 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
369 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
370 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
371 [ 34.758] (**) Option "TapButton1" "1"
372 [ 34.758] (**) Option "TapButton2" "2"
373 [ 34.758] (**) Option "TapButton3" "3"
374 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
359 [ 34.757] Module class: X.Org XInput Driver
360 [ 34.757] ABI class: X.Org XInput driver, version 16.0
361 [ 34.757] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
362 [ 34.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
363 [ 34.757] (**) Option "Device" "/dev/input/event8"
364 [ 34.757] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
365 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
366 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
367 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
368 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
369 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
370 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
371 [ 34.758] (**) Option "TapButton1" "1"
372 [ 34.758] (**) Option "TapButton2" "2"
373 [ 34.758] (**) Option "TapButton3" "3"
374 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
375 [ 34.758] (**) SynPS/2 Synaptics TouchPad: always reports core events
376 [ 34.758] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
377 [ 34.758] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
378 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
379 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
380 [ 34.758] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
381 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
382 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
383 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
384 [ 34.758] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
385 [ 34.758] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
386 [ 34.758] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
387 [ 34.758] (II) No input driver specified, ignoring this device.
388 [ 34.758] (II) This device may have been added with another device file.
389 [ 34.759] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event18)
390 [ 34.759] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
391 [ 34.759] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
392 [ 34.759] (**) TPPS/2 IBM TrackPoint: always reports core events
393 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event18"
394 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
395 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
396 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
397 [ 34.759] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
398 [ 34.759] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
399 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
400 [ 34.759] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
401 [ 34.759] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input18/event18"
402 [ 34.759] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
403 [ 34.759] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
404 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
405 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
406 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
407 [ 34.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
408 [ 34.759] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
409 [ 34.759] (II) No input driver specified, ignoring this device.
410 [ 34.759] (II) This device may have been added with another device file.
411 [ 34.759] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
412 [ 34.759] (II) No input driver specified, ignoring this device.
413 [ 34.759] (II) This device may have been added with another device file.
414 [ 34.760] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
415 [ 34.760] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
416 [ 34.760] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
417 [ 34.760] (**) ThinkPad Extra Buttons: always reports core events
418 [ 34.760] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
419 [ 34.760] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
420 [ 34.760] (--) evdev: ThinkPad Extra Buttons: Found keys
421 [ 34.760] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
422 [ 34.760] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event7"
423 [ 34.760] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
424 [ 34.760] (**) Option "xkb_rules" "evdev"
425 [ 34.760] (**) Option "xkb_model" "evdev"
426 [ 34.760] (**) Option "xkb_layout" "us"
427 [ 34.789] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
428 [ 34.789] (II) NVIDIA(GPU-0): 3D Vision stereo.
429 [ 34.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
430 [ 34.789] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
431 [ 34.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
432 [ 40.300] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
433 [ 40.300] (II) NVIDIA(GPU-0): 3D Vision stereo.
434 [ 40.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
435 [ 40.301] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
436 [ 40.301] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
437 [ 968.853] (II) evdev: Power Button: Close
438 [ 968.853] (II) UnloadModule: "evdev"
439 [ 968.873] (II) evdev: Video Bus: Close
440 [ 968.873] (II) UnloadModule: "evdev"
441 [ 968.893] (II) evdev: Sleep Button: Close
442 [ 968.893] (II) UnloadModule: "evdev"
443 [ 968.896] (II) evdev: Integrated Camera: Close
444 [ 968.896] (II) UnloadModule: "evdev"
445 [ 968.896] (II) evdev: AT Translated Set 2 keyboard: Close
446 [ 968.897] (II) UnloadModule: "evdev"
447 [ 968.897] (II) UnloadModule: "synaptics"
448 [ 968.897] (II) evdev: TPPS/2 IBM TrackPoint: Close
449 [ 968.897] (II) UnloadModule: "evdev"
450 [ 968.898] (II) evdev: ThinkPad Extra Buttons: Close
451 [ 968.898] (II) UnloadModule: "evdev"
452 [ 969.425] Server terminated successfully (0). Closing log file.
A case insensitive grep of nvidia on the previous log file (Xorg.0.log)
1 [ 30.719] (II) Module glx: vendor="NVIDIA Corporation"
2 [ 30.719] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012
3 [ 30.751] (==) Matched nvidia as autoconfigured driver 1
4 [ 30.800] (II) LoadModule: "nvidia"
5 [ 30.800] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
6 [ 30.902] (II) Module nvidia: vendor="NVIDIA Corporation"
7 [ 30.957] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 16:04:53 PDT 2012
8 [ 30.957] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
9 [ 31.031] (II) NVIDIA(0): Creating default Display subsection in Screen section
10 [ 31.031] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
11 [ 31.031] (==) NVIDIA(0): RGB weight 888
12 [ 31.031] (==) NVIDIA(0): Default visual is TrueColor
13 [ 31.031] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
14 [ 31.031] (**) NVIDIA(0): Enabling 2D acceleration
15 [ 32.658] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
16 [ 32.658] (II) NVIDIA(GPU-0): 3D Vision stereo.
17 [ 32.661] (II) NVIDIA(0): NVIDIA GPU Quadro FX 880M (GT216GL) at PCI:1:0:0 (GPU-0)
18 [ 32.662] (--) NVIDIA(0): Memory: 1048576 kBytes
19 [ 32.662] (--) NVIDIA(0): VideoBIOS: 70.16.5f.00.0a
20 [ 32.662] (II) NVIDIA(0): Detected PCI Express Link width: 16X
21 [ 32.662] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
22 [ 32.673] (--) NVIDIA(0): Valid display device(s) on Quadro FX 880M at PCI:1:0:0
23 [ 32.673] (--) NVIDIA(0): CRT-0
24 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0) (connected)
25 [ 32.673] (--) NVIDIA(0): DFP-1
26 [ 32.673] (--) NVIDIA(0): DFP-2
27 [ 32.673] (--) NVIDIA(0): DFP-3
28 [ 32.673] (--) NVIDIA(0): DFP-4
29 [ 32.673] (--) NVIDIA(0): DFP-5
30 [ 32.673] (--) NVIDIA(0): DFP-6
31 [ 32.673] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
32 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): 330.0 MHz maximum pixel clock
33 [ 32.673] (--) NVIDIA(0): Lenovo Group Limited (DFP-0): Internal Dual Link LVDS
34 [ 32.673] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
35 [ 32.673] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
36 [ 32.673] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
37 [ 32.673] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
38 [ 32.673] (--) NVIDIA(0): DFP-3: 165.0 MHz maximum pixel clock
39 [ 32.673] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS
40 [ 32.673] (--) NVIDIA(0): DFP-4: 480.0 MHz maximum pixel clock
41 [ 32.673] (--) NVIDIA(0): DFP-4: Internal DisplayPort
42 [ 32.673] (--) NVIDIA(0): DFP-5: 480.0 MHz maximum pixel clock
43 [ 32.673] (--) NVIDIA(0): DFP-5: Internal DisplayPort
44 [ 32.673] (--) NVIDIA(0): DFP-6: 480.0 MHz maximum pixel clock
45 [ 32.673] (--) NVIDIA(0): DFP-6: Internal DisplayPort
46 [ 32.673] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
47 [ 32.673] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
48 [ 32.674] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
49 [ 32.674] (==) NVIDIA(0):
50 [ 32.674] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
51 [ 32.674] (==) NVIDIA(0): will be used as the requested mode.
52 [ 32.674] (==) NVIDIA(0):
53 [ 32.675] (II) NVIDIA(0): Validated modes:
54 [ 32.675] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
55 [ 32.675] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
56 [ 33.738] (--) NVIDIA(0): DPI set to (143, 144); computed from "UseEdidDpi" X config
57 [ 33.739] (--) NVIDIA(0): option
58 [ 33.739] (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
59 [ 33.739] (WW) NVIDIA(0): UBB.
60 [ 33.739] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
61 [ 33.744] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
62 [ 33.744] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
63 [ 33.744] (II) NVIDIA(0): configuration option may not be set correctly. When the
64 [ 33.744] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
65 [ 33.744] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
66 [ 33.744] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
67 [ 33.744] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
68 [ 33.744] (II) NVIDIA(0): Config Options in the README.
69 [ 33.747] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
70 [ 34.122] (==) NVIDIA(0): Disabling shared memory pixmaps
71 [ 34.122] (==) NVIDIA(0): Backing store disabled
72 [ 34.122] (==) NVIDIA(0): Silken mouse enabled
73 [ 34.122] (==) NVIDIA(0): DPMS enabled
74 [ 34.123] (II) NVIDIA(0): [DRI2] Setup complete
75 [ 34.123] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
76 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
77 [ 34.730] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
78 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
79 [ 34.731] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
80 [ 34.789] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
81 [ 34.789] (II) NVIDIA(GPU-0): 3D Vision stereo.
82 [ 34.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
83 [ 34.789] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
84 [ 34.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
85 [ 40.300] (II) NVIDIA(GPU-0): Display (Lenovo Group Limited (DFP-0)) does not support NVIDIA
86 [ 40.300] (II) NVIDIA(GPU-0): 3D Vision stereo.
87 [ 40.301] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
88 [ 40.301] (**) NVIDIA(0): device Lenovo Group Limited (DFP-0) (Using EDID
89 [ 40.301] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
.xsession-errors (Note it was compressed a bit since a lot of the lines were the same)
1 /etc/gdm/Xsession: Beginning session setup...
2 localuser:hal being added to access control list
3 /etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
4 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
5 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
6 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
7 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
8 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
9 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
10 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
11 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
12 GNOME_KEYRING_CONTROL=/home/hal/.cache/keyring-CmEuMt
13 SSH_AUTH_SOCK=/home/hal/.cache/keyring-CmEuMt/ssh
14 GPG_AGENT_INFO=/home/hal/.cache/keyring-CmEuMt/gpg:0:1
15 Initializing tracker-store...
16 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-store.cfg'
17 Failed to play sound: File or data not found
18
19 ** (nm-applet:1443): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unkno wn return code 1
20 ** Message: applet now removed from the notification area
21
22 ** (nm-applet:1443): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown ret urn code 1.
23
24 ** (nm-applet:1443): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
25 Initializing tracker-miner-fs...
26 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-miner-fs.cfg'
27 Starting log:
28 File:'/home/hal/.local/share/tracker/tracker-miner-fs.log'
29 Tracker-Message: Setting up monitor for changes to config file:'/home/hal/.config/tracker/tracker-store.cfg'
30 Starting log:
31 File:'/home/hal/.local/share/tracker/tracker-store.log'
32 Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
33 ** Message: applet now embedded in the notification area
34 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
35 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
36 Window manager warning: Log level 16: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknow n return code 1.
37 Window manager warning: Log level 16: _nm_remote_settings_ensure_inited: (NMRemoteSettings) error initializing: Launch helper e xited with unknown return code 1
38
39 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
40 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
41 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
42
43 (evolution-alarm-notify:1444): evolution-alarm-notify-WARNING **: alarm.c:254: Requested removal of nonexistent alarm!
44 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
45 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
46
47 (evolution-alarm-notify:1444): evolution-alarm-notify-WARNING **: alarm.c:254: Requested removal of nonexistent alarm!
48 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
49 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
50
51 (evolution:3988): evolution-network-manager-WARNING **: network_manager_query_state: GDBus.Error:org.freedesktop.DBus.Error.Spa wn.ChildExited: Launch helper exited with unknown return code 1
52 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
53 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
>>> 54-3722 open: No such file or directory
3723 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3724 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
3725 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3726 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3727 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3728 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3729 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3730 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3731 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3732 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3733 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3734 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
3735 Window manager warning: Log level 8: _shell_embedded_window_unrealize: assertion `SHELL_IS_EMBEDDED_WINDOW (window)' failed
3736 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3737 Window manager warning: Got a request to focus 0x2000016 (Inbox (232) with a timestamp of 0. This shouldn't happen!
3738 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3739 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
3740 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3741 Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
3742 PolicyKit daemon disconnected from the bus.
3743 We are no longer a registered authentication agent.
3744 [1337117088,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provi ded by the application
3745 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
3746 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
3747 [1337117088,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 1 is not ready
3748 [1337117398,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 0 is not ready
3749 [1337117398,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page for group 0 is not ready
3750 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3751 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3752 ** Message: Got disconnected from the system message bus; retrying to reconnect every 10 seconds
3753 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3754 Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
3755 Window manager warning: Got a request to focus 0x1c00005 (hal@pluto:) with a timestamp of 0. This shouldn't happen!
3756 ** Message: applet now removed from the notification area
3757 gnome-session[1367]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
3758
3759
3760 (gnome-shell-calendar-server:1486): Gdk-WARNING **: gnome-shell-calendar-server: Fatal IO error 11 (Resource temporarily unavai lable) on X server :0.
3761
3762
3763 (nm-applet:1443): Gdk-WARNING **: nm-applet: Fatal IO error 2 (No such file or directory) on X server :0.
3764
3765
3766 (gnome-screensaver:1452): Gdk-WARNING **: gnome-screensaver: Fatal IO error 11 (Resource temporarily unavailable) on X server : 0.
3767
3768 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3769
3770 (gnome-settings-daemon:4503): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
3771
3772
3773 (gnome-terminal:4345): Gdk-WARNING **: gnome-terminal: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
3774
3775 g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-er ror-quark, 0). Exiting.
3776
3777 Received signal:15->'Terminated'
3778 OK
3779There is one thing I forgot to clarify, have setup up the pc as a server so I do not have direct access to the server. Everything is forwarded over ssh (using nx to connect to the server and start a gnome session). Starting KiTTY (a modification of PuTTY) with x11 forwarding I do not see any windows when I run "xinit -- /usr/bin/X -nolisten tcp". I get the following:
X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.4.4-3-ARCH x86_64
Current Operating System: Linux pluto 3.4.7-1-ARCH #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012 x86_64
Kernel command line: root=/dev/sda1 ro
Build Date: 09 July 2012 03:59:39PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 14:47:36 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
xinit: Unable to run program "xterm": No such file or directory
Specify a program on the command line or make sure that /usr/bin
is in your path.
xinit: connection to X server lost
waiting for X server to shut down .Server terminated successfully (0). Closing log file.
startx gives something similar:
X.Org X Server 1.12.3
Release Date: 2012-07-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.4.4-3-ARCH x86_64
Current Operating System: Linux pluto 3.4.7-1-ARCH #1 SMP PREEMPT Sun Jul 29 22:02:56 CEST 2012 x86_64
Kernel command line: root=/dev/sda1 ro
Build Date: 09 July 2012 03:59:39PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 14:52:11 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
/etc/X11/xinit/xinitrc: line 52: twm: command not found
/etc/X11/xinit/xinitrc: line 53: xclock: command not found
/etc/X11/xinit/xinitrc: line 54: xterm: command not found
/etc/X11/xinit/xinitrc: line 56: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 55: xterm: command not found
xinit: connection to X server lost
waiting for X server to shut down .Server terminated successfully (0). Closing log file.
I remember when I would start the pc that startx I could never get to run, I would always start the gui using gdm, which was the only thing I could get to work. I do not have a .xinitrc. I believe the nx connects and issues gnome-session to start the session but I am not sure. -
Hi,
After numerous attempts and remedies across the net my ipad is still stuck in restore mode, each time returning the follwing error code: The iPad 'iPad' could not be restored. An unknown error occured (1). This is not the usual timing out error, or so I think, and must be something else. Is anyone able to help. Putting in DFU mode, trying to re-set just isn't working sop at the moment it's stuck not doing anything and all data has been lost on the face of it if I can't get to a backup. I've tried downloading the update and manually retoring but still nothing.
I've tried 3 different PC's, removing anit-virus, spyware and firewalls etc to no avail, so any other support welcome or it's out of the window!!!My wife had a problem that sounds exactly like what you're describing. She has OS 10.6.8 and iTunes 10.5 and tried to put the new system on her 3G iPad 1. The backup went fine, but she got an unknown error 1 during the install of the new system. We weren't using this iPad for development and it was never jailbroken.
We tried putting the iPad into recovery mode, switching cables, restarting the computer, salt over the left shoulder and everything else we could think of and discover via google. My wife finally took the iPad to the "genius" at the Corte Madera Apple Store and he claimed it was a hardware failure and offered to sell her a refurbished iPad for $499. He wouldn't admit that there was any chance the problem was a result of the upgrade process.
Since we didn't believe that this "hardware failure" was a coincidence that just happened to occur during the system update, we persisted with our own attempts to solve the problem and ended up with a solution.
With the iPad in recovery mode, we turned AirPort off (and disconnected ethernet) on the Mac and restarted the update process in iTunes. When iTunes said it couldn't connect to the Apple server, we turned AirPort back on for just long enough to get the update process to resume, then we turned AirPort off again. After a while, iTunes tried to reach the server again and failed, so we turned AirPort back on for just a few seconds and then turned it off again. After that, the update continued just fine and the iPad is no longer a brick. We're pretty sure this wasn't just because the Apple servers were less busy. We had the same error moments before doing the no-WiFi trick. -
HT201210 iPhone stuck in recovery mode error 11
Was having major battery issues over the last couple of days:
From fully charged to 13% in less than 4 hours,
Phone extremely hot to the touch after use
Showing "no storage left" on device, yet I had 6GB.
Ran behavior scan, nothing out of the ordinary except for the
photos... 300 in camera roll, 1000 in photostream, but it was
showing I had a total of 1300 in camera roll and that's why
I've been having storage issues...
Anyway, the main issue now is that I'm stuck in recovery mode.
Tried to restore numerous times and have been getting error 11.
My iTunes wasn't up to date, so I will be doing that now and
giving it another shot.
Any ideas?
I have an 11" MBA running Lion.Did you try a different usb port/cord or a differrent computer?
-
Iphone 5s stuck at restore mode?
My Iphone 5s is stuck at restore mode I have tried numerous methods to bring it back to life. Its not working I really do not want to loose all my pictures and apps? Can anyone help me with this issue?. Connecting to Itunes is not working also tried restore mode which cancels as there seems to be an error/ connection lost.
If you've not previously backed it up, your data is already lost. Try this method:
Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings. -
HT4623 iphone 4 stuck in recover mode. have tried restore a dozen times.
My iphone 4 locked up on me. message was could not send or recieve calls, Had to do a restore. Now it is stuck in recovery mode. have tried to restore numerous times, hit the power & home button, keeps coming up with the usb icon. Any ideas??
Describe what happens when you perform a restore (and is it from icloud or itunes?).
Do you get any eror code?
Was the device jailbroken in the past? -
My iPod is stuck in hold mode..help!
Hi. My iPod is stuck in hold mode. I have tried turning it on and off numerous times, and i've also tried restoring it. It is still stuck in hold mode and i cannot select music to listen to. PLEASE HELP!!!
HP Windows XPwhat u mean by hold mode? Have u checked its not on screenlock by psliding the button next to the headphones port?
have u reset it by holding the centre button with the menu button together for 10 seconds?
Try tapping it lightly if no other solution works.
Edited by an Apple Discussions Host -
My iPod Touch is stuck in recovery mode after I left it on while updating!!!
I was updating my ipod touch 3rd generation (ios 4.3, i think) and I saw a wasp and left the computer on in the middle of the updating process and now the ipod is stuck in recovery mode and it says the only way to get it out is to recover it, but that will erase everything!!! HELP ME!!! until i get an answer I HATE YOU, APPLE URGG
operating system: whatever the latest available to itouch is.Without knowing what the error message said all I can suggest is:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Ipod classic 120 stuck in disk mode, not recognized by windows or itunes
so ive been havin tons of problems with my new ipod 120 classic
first one day when i plugged it in it told me it was corrupted and needed to be restored
then it would not restore
i formated it with windows but that didnt seem to do anything
the other night somehow i got it to the point of naming my ipod but after that, it stopped working again
for a while i couldnt even put it into disk mode
now, when it is plugged into the computer it is stuck in disk mode, yet not recognized by the computer or itunes
it makes the sound when i plug it in but never shows up
also, when its not plugged in, it starts up and just brings me to a screen that says use itunes to restore. but then i plug it in and it goes right to disk mode and do not connect, and isnt recognized
when i unplug it i can see it pop up on my computer for that one second i unplug it
ive tried this on a number of computers and it does the same thing
when i unplug it from being plugged into the computer it just sits in diskmode saying ok to connect
if i reset it by pressing center and menu, it just goes back to the use itunes to restore screen
i cant get it to enter diagnostic mode, and when i hit center and play after center and menu it does nothing either
ive just about had it with ipods
this is my 3rd or 4th classic that i have had problems with
apple should be ashamed of themselves for such a buggy product for so much money, and very very crappy service
any help greatly appreciated....but im prety sure ill be moving onto another product after this
luckily i am still under warranty so they offered for me to send it in....but then i am without music for about a week
i feel i should be compensated for that alone, aside from just fixing it for me
please help me fix this so i can get back to some tunes!
thanks for any info1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode." The ipod is no longer being recognized by itunes.
I am having the exact same problem. My ipod has been stuck in disk mode for over two hours and now itunes is frozen.
-
Macbook Pro 17" (Mid-2009) Randomly Getting Stuck in Sleep Mode when Unplugged
Hey guys, this is my first time posting so please excuse me if I do anything wrong. Here's the issue:
I have a Macbook Pro 17" (Mid-2009) that has had an issue with the whole computer shutting down at random, but only when unplugged from the MagSafe power adapter. Upon scouring all the forums and discussions I could, I haven't found anyone with the same exact circumstances as myself, hence this post. Let me explain.
Many say it's a battery issue. That can't be, because this has been happening for months, and after I finally got my laptop repaired a few days ago, it still occurs. I had sent it in for a logic board failure, but consented them to fix any other parts that weren't functioning properly. Upon the return of my machine, I found that they installed a fresh hard drive, new battery, new logic board, and a new speaker on the right side. This must mean that neither the logic board nor the battery are the issue.
What else can this point to? Again, it only occurs when the Mac is unplugged from a power source, and it doesn't totally shut down. It goes half way, essentially stuck in sleep mode. The white indicator light on the front freezes, and the power button has to be held to fully turn the laptop off, then pressed again to reboot. It can last anywhere from a single minute to a few hours before shutting off again, and it's always the exact same circumstance, no matter what kind of computing I'm doing at the time.
Note that while no one else has found the solution to lie within resetting the PRAM or SMC (in the discussions I read), I still need to try that tonight and see if it affects anything.
Thanks in advance,
SeanMacs are having problems with SSD drives. The root cause is the OS X journaling file system. The Apple-written SATA controller driver can saturate the bus at times, inhibiting performance. Some manufactures are even selling special "Mac" versions of their SSD drives that are slowed down on purpose to compensate for this problem. Unfortunately, the problem still exists in Snow Leopard, from what I've read.
Also, I read that Apple has secretly slowed the recent new laptops down (3.0GB/s to 1.5GB/s) to compensate for the problem.
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Macsimum News Associate Editor Creator of 'Mac611 - Mobile Mac Support' -
MacBook Pro- Stuck in safe mode!?
Hi, I am a first-time MacBook user and need a little help...
I am running lion software and recently performed a software update (pop-up screen general update). Since doing this, my Mac is now:
- Only allowing me to type in Shift Mode i.e. I cannot type '1' but it types '!', '3' becomes '£', etc etc
- Stuck in safe mode
- Will not recognise any USB's (however i suspect this is because it's stuck in safe mode!)
Any help would be much appreciated??? I cannot use it any more, and it makes me just want to get rid of it! :-(
Thanks in advance....... :-)Try resetting the SMC - http://support.apple.com/kb/HT3964 - see the drop-down menu on "Resetting the SMC on portables with a battery you should not remove on your own."
Good luck,
Clinton -
MacBook Pro stuck in sleep mode: can't restart or shut down, black screen
I'm running the latest version of Snow Leopard on my mid-2009 MacBook Pro Unibody. After installing the latest Software Update, including a Firmware update for my SuperDrive, the following problem has occurred, for the very first time:
I closed the lid of my laptop for the night, as I do routinely every night, thus putting my MBP to sleep. I leave the various apps open, usually Firefox, iTunes and Entourage. The next morning my MBP felt hot and the screen remained black... it would not change. After repeatedly trying and failing to clear the black screen and bring my apps up, I held the power button down to do a complete Shut Down. My system turned off, but did not do an actual Shut Down. When I press the power button to turn it on, it comes right back into sleep mode with the screen remaining black. I cannot seem to force either a Shut Down or a Restart. I unplugged all peripherals and the power cord, let my MBP cool down completely--for a couple of hours-- and tried everything again. Still no change: I'm stuck in sleep mode with a black screen. I've also tried resetting the PRAM and the SMC, but neither works, probably because I'm not coming from a Shut Down. Is anybody else having this problem? Anyone have any suggestions? I think the problem must be somehow related to the latest update, but whatever it is, I'd like to resolve it.
Thanks in advance for any help.I can't get into my system to see my update version, but I'm certain I'm running the most up-to-date version of Snow Leopard and all other latest updates applicable to my mid-2009 MBP, as I run Software Update routinely. I thoroughly completed all update installations, including the SuperDrive Firmware update, followed all instructions meticulously, including rebooting, and actually used my system for at least one full day without any problems. I'd even recently repaired all permissions. Everything was "humming" along very well. This problem came totally out of the blue. Because the screen is black, I can't actually see what's on it; however, I've put my MBP to sleep every night by closing the lid and it awakens in the morning when I raise the lid. This time the sleep light indicator is on, but nothing happens when I lift the lid, touch the track pad or a key. If I hold the power button down briefly, the sleep light goes out, but when I press the power button again, the light comes right back on. If I depress the power button for several seconds, to initiate a shutdown or restart, it simply shuts off the fan and refuses to completely shut down. This is evidenced by the fact that depressing the power button to start up brings the sleep light on very quickly. I can tell by the way the system sounds that it is on behind the blackened screen. Sorry I can't get you the update versions.
Thanks -
Help! I finally decided to update my ipad from itunes/laptop & now its stuck in recovery mode!
Hi guys. I just saw this same question from someone else but after i logged into support I cant find the post anywhere. I hate asking again, sorry for asking again, but I need HELP and cant keep searching the posts.
Ive never updated ipad 2 before and not really good with computers. When trying to download certain apps, it would stop installing & tell me i needed to update to the latest update. Finally updated the ipad & i think syncd it but when it was done the only thing that showed up on screen is the RESTORE picture. I just realized that if i restore i will loose all my Memos & Notes. I DONT WANT TO LOOSE THEM ! I have info on ipad memo that I really need & that i didnt write down anywhere else. Is there a way to save my notes/memos/data before I restore the ipad? Ive gone 5 days without it and really need to use it. Am i just out of luck :{ ?
There was an answer by someone about restoring an ipad giving directions and after the restore it will ask u questions that u have to answer YES to. She had school notes and the other guy had 600 pics. The girl stated she did all the steps but she didnt see anyplace to say Yes and she lost everything. Im afraid to risk it and will take it to a store or something if theres away they can do it.
I babbled and im sorry if this made no sense so heres the clear question : Is there a way to save your memos, messages, notes, contacts, etc from an ipad that is stuck in restore mode BEFORE U restore? any help will be so appreciated !!!iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom
Maybe you are looking for
-
A reasonably current and comprehensive list of Mac error codes can be found on some folks' machines, but not mine. Why not? Error codes can be found in the header files used to compile code. On Mark's machine... Mark Jalbert wrote: Here's the comma
-
I have folders on my iPad mini that group specific things such as weather and news in one folder, game apps in another folder etc. When I go into my news and weather, for an example, and chose a news I find when I close that news, it also closes the
-
Need to create Stock order on creation of Delivery
A business requirement - to create Stock transport order using ME21N after a delivery is created by tcode VL01N depending on few conditions. Is there a user exit which can be utilised for achieving this, Any body have a andwer, plz reply
-
How to use Print Screen function (part deux)?
The previous thread for the Print Screen function has been marked as read only, and won't allow any replies. I tried all of the suggestions (PrtScr, CTRL + C + PrtScr, etc.) and then CTRL V into MS Paint, but Print Screen still doesn't work on my mac
-
Hi All, My iTunes doesn't open. The weird thing is itunes.exe *32 and the helper appear in my processes, but iTunes does not appear in my running applications or on my desktop. The icon in my taskbar elimuminates the way running programs do for about