X11 won't work, I need help!

I have X11 installed in my utilities folder but when I try and open it the icon disappears just as fast as it shows up on my dock. Any ideas on what my issue could be or how I can get this to work?

X11 was probably installed along with Tiger. What version is it?
Here's the current version 2.1.5 that you can download.
http://www.versiontracker.com/dyn/moreinfo/macosx/17747
 Cheers, Tom

Similar Messages

Ipod 2nd generation won't work. Need Help PLEASE

i have a ipod 2nd generation and haven't used it for 3 months or more. and now that I try to turn it on, it won't turn on. I have tried charging it for 2 hours and still the screen stays black. need help. what do I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I deleted my macintosh hd permanently mac won't work i need help

i need help

I'm not certain what you mean? Did you, in fact, as Templeton asks, "delete the contents of your hard drive"? You're obviously up and running on some computer - is it your MacBook Pro?
Please explain a bit more expansively...
Clinton

HT204291 Why don't I see the airplay icon in my settings? I have the ios7 installed now my netflix won't work as need to turn off mirroring..... And the airplay device is not installed.... Anyone help on this?.

Why don't I see the airplay icon in my settings? I have the ios7 installed now my netflix won't work as need to turn off mirroring..... And the airplay device is not installed.... Anyone help on this?.

Reboot your router. The icon only shows when connected to wifi and Apple TV or similar device. Same thing happened with my phone and the icon appeared in control center after router reboot.

I restored my iphone and updated it but the progress didn't complete and now my iphone is not working. i need help asap.

my phone was not working only the restore button was available so i restored it and they told me i have to update my iphone 5s as well. i waited till the end the update software was downloaded successfully but then the iphone restarted by itself and now its not working. the iphone screen is shown the picture when you first time open the phone to connect it to an itunes. i connected it by it not working, i restart everything still not working:( i need help asap please. thankyou

it seems like apple's activation servers have gone down under the weight of the overwhelming amount of activation requests. you will be able to activate your phone once the servers are able to catch up with the activation requests.

TS1702 Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

After I upgrade maverick my display will suddenly shut off but my sounds is still working. Need help

After I upgrade maverick my display will suddenly shut off but my sounds is still working. Need help on this? Thank you

Hello rodamitjr,
It sounds like your iMac display will turn off unexpectedly, but you can tell the computer is still on because you hear audio.
I found an article with steps to troubleshoot issues with displays. This article is for internal and external displays, so you can skip any steps referring to an external display. I recommend reviewing the full article, but this step specifically stands out to me for the issue you described:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the full article here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

If I already purchased FaceTime for Mac and recently upgraded my HD. How can I retrieve that app again? I found it in my Time Machine back up, but the files won't work. Please help.

If I already purchased FaceTime for Mac and recently upgraded my HD. How can I retrieve that app again? I found it in my Time Machine back up, but the files won't work. Please help.

Nope. I do the same exact thing. If you have DVD's and blu-rays you can't download a free application called Handbrake. You can set it to Apple TV2 automatic format and they will come out as playable m4v's that can play I'm iTunes. All you have to do is turn on Home Sharing in both iTunes and your Apple RV and you'll be good to go!

I have printers at home and work. i need help programing my macbook print utility so computer knows which printer to use depending on where i am. thanks

i have printers at home and work. i need help programing my macbook print utility so computer knows which printer to use depending on where i am. thanks

Look for cloud solutions such as DropBox, OneDrive, SugarSync or others. They are all cloud based services that sync documents between computers via the cloud. Of course another solution is simply a flash drive formatted in exFat so that Macs and Windows computers can read it.

Got a new PC with Windows 8. Now my CS6 for windows 7/XP won't work properly! HELP!

Got a new PC with Windows 8 and now my CS6 download for Windows 7/XP won't work perperly! HElP!

ANYBODY????

IChat video won't work !! HELP!!!

my girlfriend and I both recently bought mac laptops and hope to have some video conferencing on the go, being that i'm moving away. I already have a mini DV camera, and it works fine with the video conferencing....but she has a logitech one and it won't work with ichat....is there something taht needs to be installed or will it just not work for some reason??
HELP PLEASE!

iSight vs Camcorder or other web-cam FAQ
iChatUSBCam link and other info in there.

Multi-angle won't work..please help!

This problem is using version 2.0.0 (sorry, I hope someone out there still remembers) and has been replicated on two seperate computers. The first is an ibook g4 1.33ghz with 512 ram...the second a dual g5 2.0 ghz with a 2 gigs of ram. The problem occurs during the build. On the g4 the problem crashes the program, on the g5 there is a internal muxer error and the build process cannot complete. I first noticed the problem with a big project that was mostly audio with slide shows...so I stripped it down to the bare essentials and the problem is still there. This is what I do: new project> import 3 aiff files (16bit/48khz) and 2 jpg images > copy the first jpg into a slide show 3 times and add one aiff to each slot > convert to track > add the second jpg into video track 2 under each of the first jpg's (the size auto-matches) > make basic menu to start playback of slideshow > simulation works fine, angle switches fine > crashes or stops on build (depending on computer using)
things i've tried that haven't worked > different jpgs, ones that have the same dimensions > fix markers in the track menu preferences > tried using my internal drive instead of external for both originating files and build files > if i delete the second video track of jpg's the build goes fine so this is definatly a multi-angle issue...I've heard of bit-rate issues with multiangle, but these are jpg's, there is no video...
Someone PLEASE help me
Thanks

Ok thanks for the help... I don't know how helpful it will be though... let me explain what I'm trying to do, which will explain why some of your suggestions wouldn't work. I record live concerts and I'm just trying to fit a full concert onto a dvd. I would like chapter markers at the beggining of every track, though I would like absolutly no pauses between tracks (tracks have been cut to cd sector boundries of 1/75 second, which seems to work fine on DVD even after converting from 44.1 to 48. ). I would like 2 menus ... a welcome screen and a setlist screen linked to each song. I would like the show to play in it's entirty with a bands logo on the screen (which is the first JPG) and have the second angle just black (to save tv sets from frying). If the show is 20 songs then I create a 20 slot slide show with the bands logo and the 20 songs. I then covert this to a track...as this is the only way to add an alternative angle. If I don't add 2nd angle of black, the burn goes fine, if I do then it crashes.
Now if I were to encode the jpg's to mpeg2 before adding to the project this would mean I need over 3 hours of each, cut in 20 different spots that correspond exactly to the audio.
Now the quality of the audio is very important to me so I'm not willin to use any lossy compression scheme. The whole disc is really just for listening too and is of an audiophile nature. Now I understand AC3 does a pretty good job, which is fine for movies, but for my purposes I need it to be exact. So this means I would have to fit the 3 gigs of audio along with 6 HOURS of mpeg2 video encoded from the 2 simple jpg images that take up less than a mb themselves. This is simply too much data, I can't fit it onto the DVD.
What's nice is what DVDSP is suppose to do is convert the jpg's for you and they only then take up a very small amount of room, and stay on for the full 3 hours none-the-less.
So you see any workaround that envloves making the slideshow as video in FCP beforehand won't work because I'm going for 2 angles at over 3 hours with uncompressed audio.
Now you say that DVDSP converts the jpg's to mpeg2 anyway so I figure it must just keep looping the same video over and over to save room..because there is no significant increase in size from adding the jpg. It's definatly not making a 3 hour mpeg2 file. So if I encode the jpg beforehand, say for 30 seconds...how do add it to the project in such a way that it just loops the video over and over to save room (the same way it does internally with the jpg) Keep in mind I need to make the video fit the audio tracks exactly with chapter markers inbetween. When adding jpg's to a slideshow and then converting to a track this is done automatically and when I add the second jpg to V2, the length auto-matches to the chapter markers. So it's very easy when working with still pictures ... but how do I do it so simply with a 30 second mpeg2 clip? And make sure that it's always referencing the same clip without having to add it umpteen times and thus uincrease the disc size beyond capacity.
Now as for the multiangle encoding fix ... lets say I proceed with the two jpg images as they are and let DVDSP do the encoding... I want to make sure both streams are compatible which is probably why the build hasn't been working.... I know the markers and length are good because the slideshow added them and the second jpg autosizes to them...and i have fix markers checked in track preferences. But how do I make sure that they have the same GOP structure and that they will have the same bitrate? Now the pics are very different so a different bitrate is expected. One is just black and the other is a band logo. But I tested it with identical pics in both video tracks to see if it was a compatability issue and the build still failed.
Ok so I don't neccesarily need to use jpg. The band logo is jpg but I can convert it...the black is just a slug from FCP exported as a still. What's the best format to use for what I'm trying to do? What has the best success rate for encoding? Also you mention having access to a decent encoder. For $1000 i was hoping that I was getting one in the package ... bewtween FCP, quicktime, compressor, or DVDSP ..it's rediculous that a decent encoder wouldn't be included... what would you consider a decent encoder ... and of the ones I have which one should I be using (for future projects involving video)?
I know this is a tough one, I appreciate any help that can be given.

How can this pattern work? need help!!

the model i need have 3layers:JSP+EJB+SocketServer, i know EJB can act as Socket Client(not Server),but the
main problem is that i must use a .dll or .lib file(written in
c) in EJB to packge the socket data.someone says EJB
can use JNI while EJB Spec won't allow it, i dont't want
to take the risk also.Is there any other way can work?
(use runtime in EJB?)
if EJB can't work in this pattern,can i have another choice? (JSP and SocketServer can't be replaced)
NEED HELP!

Use the Mediator pattern.

TS3212 So I tried downloading the newest version of iTunes but it wont download it will just say iTunes is safe and won't download I NEED HELP?

I need Help! i tried syncing my ipod then it said i neededthe nwer version of itunes so i downloaded it like 8 times! it still didnt work so i uninstalled it and it wont download at all when i try a window willl pop up and say would you like to save this file? and i will click save file and it would download but its nowhere on my computer?!?!

Hi DJBentley2011,
Welcome to Apple Support Communities.
It sounds like there is an issue burning CD's in iTunes. Is the playback issue only occurring on a specific device and does the disc show up correctly in iTunes? The article linked below should help you resolve optical drive issues, it walks you through identifying potential issues and provides troubleshooting suggestions.
iTunes for Windows: iTunes Diagnostics, CD/DVD Drive Tests
http://support.apple.com/kb/HT1567
I hope this helps.
-Jason

Error Message and Itunes won't open. NEED HELP ASAP PLEASE

I tried to get into my iTunes from my desktop short cut and the error message saying "Problem with Shortcut" then saying "This action is only valid for products that are currently installed." ***??? Anyway I tried to download a new version of iTunes then it said it could no remove old files. SO, I tried to remove iTunes by add/remove programs and it won't let me.>> NEED HELP I LEAVE TOMORROW FOR TRAINING AND I NEED SOME MUSIC AND UPDATE ON MY IPOD>>>>

Welcome to AD!
Download, install, and run this tool from Microsoft. Use it to fix the iTunes and QuickTime programs, as well as Apple Software Updater.
http://support.microsoft.com/kb/290301
Then reinstall iTunes.
If you need step-by-step directions, they are in the *General installation troubleshooting* section of this Apple article. Click on each line to expand the instructions.
http://support.apple.com/kb/HT1926
The Microsoft installer cleanup tool is listed in the third step, "Clean up iTunes installer files on the computer".

X11 won't work, I need help!

Similar Messages

Maybe you are looking for