X11vnc not working
I had made a thread a long time ago here: https://bbs.archlinux.org/viewtopic.php?id=52538 however I reinstalled since some times and haven't used VNC in a while, and now can't get it to start...
What I am doing is ssh'ing into a screen session to my server:
ssh -tv -Y -L 5900:127.0.0.1:5900 -p 2020 [email protected] screen -r
(typically this is in a urxvt window always open)
Now I'm starting x11vnc in there and getting error as per this: http://pastebin.com/bFac1XMJ
Appreciate any help, thanks!
edit: Well I restarted my server to run X at boot and now I get this using display = :10.0:
debug1: client_input_channel_open: ctype x11 rchan 3 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 40938
debug1: channel 2: new [x11]
debug1: confirm x11
10/02/2011 19:55:09 x11vnc version: 0.9.12 lastmod: 2010-09-09 pid: 2084
10/02/2011 19:55:09 Using X display :10.0
10/02/2011 19:55:09 rootwin: 0x15a reswin: 0x2200001 dpy: 0x9594530
10/02/2011 19:55:09
10/02/2011 19:55:09 ------------------ USEFUL INFORMATION ------------------
10/02/2011 19:55:09 X DAMAGE available on display, using it for polling hints.
10/02/2011 19:55:09 To disable this behavior use: '-noxdamage'
10/02/2011 19:55:09
10/02/2011 19:55:09 Most compositing window managers like 'compiz' or 'beryl'
10/02/2011 19:55:09 cause X DAMAGE to fail, and so you may not see any screen
10/02/2011 19:55:09 updates via VNC. Either disable 'compiz' (recommended) or
10/02/2011 19:55:09 supply the x11vnc '-noxdamage' command line option.
10/02/2011 19:55:09
10/02/2011 19:55:09 Wireframing: -wireframe mode is in effect for window moves.
10/02/2011 19:55:09 If this yields undesired behavior (poor response, painting
10/02/2011 19:55:09 errors, etc) it may be disabled:
10/02/2011 19:55:09 - use '-nowf' to disable wireframing completely.
10/02/2011 19:55:09 - use '-nowcr' to disable the Copy Rectangle after the
10/02/2011 19:55:09 moved window is released in the new position.
10/02/2011 19:55:09 Also see the -help entry for tuning parameters.
10/02/2011 19:55:09 You can press 3 Alt_L's (Left "Alt" key) in a row to
10/02/2011 19:55:09 repaint the screen, also see the -fixscreen option for
10/02/2011 19:55:09 periodic repaints.
10/02/2011 19:55:09
10/02/2011 19:55:09 XFIXES available on display, resetting cursor mode
10/02/2011 19:55:09 to: '-cursor most'.
10/02/2011 19:55:09 to disable this behavior use: '-cursor arrow'
10/02/2011 19:55:09 or '-noxfixes'.
10/02/2011 19:55:09 using XFIXES for cursor drawing.
10/02/2011 19:55:09 GrabServer control via XTEST.
debug1: client_input_channel_open: ctype x11 rchan 4 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 40939
debug1: channel 3: new [x11]
debug1: confirm x11
debug1: client_input_channel_open: ctype x11 rchan 5 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 40940
debug1: channel 4: new [x11]
debug1: confirm x11
debug1: client_input_channel_open: ctype x11 rchan 6 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 40941
debug1: channel 5: new [x11]
debug1: confirm x11
debug1: client_input_channel_open: ctype x11 rchan 7 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 40942
debug1: channel 6: new [x11]
debug1: confirm x11
Last edited by colbert (2011-02-11 00:56:14)
Thanks krunge! I think I am indeed having an issue with X server not starting or starting improperly, I hope you (or anyone passing by of course) can help.
I am using the Start X At Boot from the wiki (the inittab method) and here is my /etc/inittab:
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
#c1:2345:respawn:/sbin/agetty -n -l /usr/local/sbin/autologinbobby2 38400 tty1 linux
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/opt/kde/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >& /dev/null
#x:5:respawn:/usr/X11R6/bin/xdm -nodaemon
#x:5:once:/bin/su bobby2 -l -c "/bin/bash --login -c startx > /dev/null 2>&1"
x:5:once:/bin/su -l -c '/usr/bin/startx </dev/null' bobby2
# End of file
Here is my ~/.xinitrc:
ââ> cat .xinitrc
#!/bin/sh
# ~~/.xinitrc
# Executed by startx (run your window manager from here)
# exec ion
# exec wmaker
# exec startkde
# exec icewm
# exec blackbox
# exec gnome-session
exec ck-launch-session startfluxbox
# exec startxfce4
# exec openbox
# exec startlxde
And here is my ~/.bash_profile:
ââ> cat .bash_profile
. $HOME/.bashrc
if [[ -z "$DISPLAY" ]] && [[ $(tty) = /dev/vc/1 ]]; then
startx
logout
fi
Thanks for any help!
Similar Messages
-
Not work tablet UI on Prestigio 5080 PRO tablet
I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.
Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team -
Why self-defined access sequences of free goods can not work?
Hi gurus,
I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
when i used the standard access sequences ,it is OK .
Can anybody tell me why?
thanks in advanceDear Sandy,
Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
Make sure that these fields are flowing in your sales order.
I hope this will help you,
Regards,
Murali. -
Adobe bridge raw not working with windows vista in photoshop cc, why?
adobe bridge raw not working in photoshop cc, is there a fix?
Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista. -
Adobe Bridge CS5 in windows 7 not working?
Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager -
ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW
ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html -
Partner application logoff not working
We have a partner application registered with sso with custom login screen. The login works fine. We use the following code to logoff the partner application in logoff.jsp
response.setHeader("Osso-Return-Url", "http://my.oracle.com" );
response.sendError(470, "Oracle SSO");
session.invalidate();
but the logoff is not working properly. It is not invalidating the session and the logout http request is not going from the application server to the sso server.
Are there any additional configurations for SSO logoff.Any help is appreciated.
ThanksHi
The WF should also trigger if i add the Partner function in UI.If i change any Attribute the WF triggers but i dont want to change the attribute when i add the partner function.
If i have only one event for WF that is Partner Change the WF will not trigger it for the 1st time when i save the UI. But next i come to the same saved doc and add a partner function then the Wf triggers.
So this means that Partner change is active.
the issue here is i need to trigger the WF on , the 1st time i save the UI, for which i wil be using Attribute Change and next time when i come back to saved doc the and add only the partner function and no changes are made to attributes the WF should again trigger.
Thanks
Tarmeem -
IPhone 4 Voice Memos not working/saving
Hi there,
I'm having trouble with my voice memos too. Up until yesterday they were working fine and now, even though the record button works, the stop button does not and I can only pause them. Worse again is that the button to go into the menu to view all voice memos is not working so I can't play them from my iPhone and nothing new is saving to my iTunes. Please help!I've always had the "Include Voice Memos" option selected. I think that only pertains to syncing voice memos from iTunes to the iPhone after it has been copied to iTunes. It has to be the new OS/iTunes not communicating that new memos have been recorded. For some reason they won't sync when I want them to, and then a few syncs later they magically appear.
By the way, I'm VERY comfortable with the iTunes and iPhone systems. I've been using iTunes for 5 years, and I've been recording class lectures with the iPhone voice memo app (and another app) for a couple years. It's not an error of not seeing that the memos were added; they don't exist in my library or music folders.
JUST OUT OF CURIOSITY, POST WHICH FIRMWARE YOU ARE RUNNING EXACTLY!!!
I'm on an iPhone 4, running firmware 4.0.1 -
Installed Premiere Pro CS4 but video display does not work?
I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
RonI would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2 -
Ideapad A1-07 tablet wifi-bluet​ooth does not work!
Hello everyone. As you can see from the title on my tablet is not working wifi and bluetooth. When turning wifi tablet is reset and continues to be off and on until it forcibly turns off, and when you turn it on again, and do not touch wifi everything is normal and there are no problems with resetting. Can someone help me and give suggestion to solve this stupid problem. I'm from Croatia and I'm bad with the English writing.
Hi
Welcome To Lenovo Community
Please perform a factory reset
Please ensure you have backed any important data before doing factory reset
Hold the volume down and the power till Lenovo logo appears .
System will boot into recover mode. Follow the instructions
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Polygonal lasso tool not working with stylus on Surface Pro 2
Hi guys,
I'm new here so please bare with me if I'm posting in the wrong place or don't make immediate sense.
Hardeware / software used: surface pro 2 and I'm running photoshop CS5.
Problem is a fairly basic one: I am trying to make basic selections using the polygonal lasso tool (using the stylus that comes with the tablet) but it simply will not work. All I get when I touch the stylus to the screen is the circle that appears then fades. If I attach the keypad and try using that then it works no problem at all.
Does anyone have any ideas as to whether there is a particular setting that I need to switch on or off e.g. something relating to pressure sensitivity (although not sure why this would affect this particular selection tool)?
I've searched the web and come up with nothing so far so any help is greatly appreciated!
Thanks for your time
Scottsame problem on surface pro 3 !!!!
and i think quite significant, for lot of artists using polygonal lasso a lot (including me). How come that the stupid surface cannot work properly -
Excite PRO 3G connection not work after Android v4.3 update
Hello,
I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35.
After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me.
Thank you>After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
Go to the mobile network settings and search again for the 3G network.
I had similar problem with my Android Smartphone and my o2 provider
I started new search, then I chosen the O2 again and then I could solve the problem.
In case this does not work for you, recommend you to reset the tablet back to default (factory settings) -
A2109 tablet autorotate does not work
The autorotation on my recently purchased tablet A2109 does not work. I look in settings and the auto rotate field is not highlighted, I therefore cannot choose to turn it on.The tablet has the Android jellybean OS and I did update it but to no avail. Can anyone help?
Thanks
Solved!
Go to Solution.Dear tdsouza
Welcome in lenovo forums
just a clarification , do you mean option Rotate is dimmed in setting
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Tecra M7: Tablet does not work after lid closing
Has anyone had problems with the tablet not working after closing the lid on a Tecra M7? Bios is 3.20
Doesn't seem to happen on hibernate or sleep.
I have the lid set to do nothing on close.Hi
What do you mean with tablet not working after closing the lid?
Does the notebook freezes or what?? What happens exactly???
The close the lid settings can be set to hibernation mode or standby mode or no action.
These settings can be set in the power saver setup actions.
If you have some problems with some installed Toshiba applications I would recommend reinstalling the TOSHIBA Common Modules and the program which doesnt run correctly!
Best regards -
For what reason on my tablet with OS Android 4.1 does not work flash on the sites?
Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust
I found this for example:
http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/
Maybe you are looking for
-
I know the image can fill the monitor, because at start up, the white Apple logo screen fills it up. But once the system starts up, there are bands of black framing the image. I have searched extensively on the internet and found the following clue
-
Form created with LiveCycle is not saving the data of a fillable form.
I had posted this in another forum, which got moved over to this forum. Forgive the double post, I wasn't sure if it was assumed that it was resolved. This document: http://www.southark.edu/employment/application-v5.pdf was created a couple of yea
-
Hi, I have a MSI GX740 laptop and I was thinking of buying a 3D TV, but I can not find enough info about the laptops HDMI out. Can it output 3D so I can game and play movies in 3D on the 3D TV (LG 50" 3D Plasma Smart TV 50PZ950W)? Can the DVD drive p
-
I have older foxfire 3.6 and have downloaded 9.1 and can not get to load
i have 3.6 and have downloaded 9.1 3 time but it will not run. What should i do?
-
Budget control for commitment item and WBS
Hi all, We assigned cost center in certain WBS, also create budget for this WBS. Since we activated funds managenet(FM), for all the postings which posted to this WBS, system will control budget for both WBS and commitment item, however, we just woul