X120e: Suspend problems after BIOS upgrade.

I have a ThinkPad X120e (0596RZ6), which had BIOS version 1.08, that I have upgraded to 1.16 (8FET32WW).
I used a CD-ROM to upgrade the BIOS (8fuj09uc.iso) and all went smoothly.
Now, whenever I try to suspend to RAM while running on battery, it visibly suspends, cannot resume, and drains the battery as quickly as it would while running normally.
It worked just fine with 1.08, and nothing has changed in the OS that could break it.

The problem persists after downleveling the BIOS to 1.11. Older versions do not seem to be available for download.
Please, for the love of God, if you release a BIOS upgrade without properly testing it, then state so clearly so that people do not waste their resources such on frustrating "upgrades."

Similar Messages

Lil problem after bios upgrade/flashing

I have a K9N neo nvidia nforce 550 mainboard and found a new bios upgrade from the msi website using the express download. Ever since ive upgraded, right after startup i get a message in windows saying it found a new PCI device and that i need to install a driver for it, i have 3 pci devices installed rbefore upgrading bios (GPU, Soundcard and wlan card) and theyre all working right now, i have no idea what pci device my pc has found because there is absolutely nothing installed other than those 3. ???
Any feedback would be much appreciated, thank you

Quote from: Ithiot on 05-March-07, 01:40:20
OK so i installed one of the drivers from the express download function, it was realtec audio device driver (or something), i installed that. but sstill wierd since i dont have that in any pci slot, anyways, im not getting the popup asking me to install unknown device anymore.
(AMD away driver wouldnt install for some reason, had an error, so i think im gonna leave it at that for now, i dont want any more problems lol...)
re install chipset drivers, after that if still yellow devices left use program above to ID.

KT3 Ultra2 (6380) Problems after BIOS upgrade

Recently upgrade bios to 5.7 to work with the 2800+ I just got. The flashing process seemed to work without any problems. Upon rebooting of the machine I got the error CMOS\GPNV Bad Checksum. If I choose f2 (load defaults and continue booting) the machine will boot. If I reboot I get nothing....not even video. I have to clear the CMOS to get it to post but I receive the same error message. Im thinking its a memory issue. I have a pc2700 512 module in there currently which has worked fine. I have fiddled with the memory settings w/ no success. What should these settings be in my bios? Also have a geforce 4 video card if that is of any help?
Any help would be greatly appreciated!!!!!
-Matt

oh anohter thing...
i got a two short beeps - pause and then another short beep for a mobo error code.
i find it very strange how if i clear the cmos settings...boot it...hit f2 to load defaults and continue it boots. however after that a cold boot or even a reboot the machine wont even post. I feel the answer lies in there somewheres.....
-Matt

Overclocking problems after BIOS upgrade

I’ve currently a MSI 865PE Neo2 mainboard with an Intel Pentium 4 2,4 GHz/FSB 800, 400MHz DDR-SDRAM.. Current version of BIOS is 1.3 and I succeeded to overclock P4 up to 3,0 GHz.
To achieve such a benchmarking I did the following steps (at least this seams to be the fail safe procedure to achieve success in overclocking P.4 to 3,0 GHz):
Load Setup Default settings first, changed Frequency/Voltage control as follows:
Dynamic Overclocking:       Disabled
Performance Mode:          Slow
CPU Ration Selection:       Locked
DRAM Frequency:          Auto
Spread Spectrum:          Disabled
Adjust CPU Bus Clock (MHz):    250
DDR Clock(MHz)         500
Adjust AGP/PCI Clock(MHz)   66,66/33,33
CPU Vcore Adjust         No
   CPU Vcore         1,750
DDR Power voltage         2,50V
AGP Power voltage         1,50V
After reboot I get:
Dynamic Overclocking:       Disabled
Performance Mode:          Slow
CPU Ration Selection:       Locked
DRAM Frequency:          Auto
Spread Spectrum:          Disabled
Adjust CPU Bus Clock (MHz):    250
DDR Clock(MHz)         400
Adjust AGP/PCI Clock(MHz)   66,66/33,33
CPU Vcore Adjust         No
   CPU Vcore         1,750V
DDR Power voltage         2,50V
AGP Power voltage         1,50V
That is, the mainboard keeps the FSB at 250 MHz but changes DDR Clock to 400 MHz. Thus everything works fine (forcing DRAM Frequency setting from Auto to 400, simple doesn’t work. Don’t know why?).
After upgrading the BIOS from version 1,3 to 1,5 the mainboard never adjusts the DDR Clock to 400 MHz and always reset to default 2,4 GHz base CPU clock frequency.
To my despair, after many different settings I could ever be able to overclock P4 to 3,0 GHz !!
Could you anyone please help me?
Kind regards,

There is really no efect in increasing the RAM voltage, I’ve tried up to 2,75 Volts.
With BIOS after 1.3 I always get "DRAM timing is too tightly so reload timing..."
Nevertheless I flashed BIOS version 1.7. After many tries what I've discovered is that if I set DRAM Frequency to 333, system shows after reboot DDR Clock (MHz) = 400 !!!
So everything works fine, Pentium 4 running at 3,0 GHz with CPU Bus Clock(MHz) = 250. Maybe this is a bug !?!?
To be on the safe side I've changed DDR Power Voltage to 2,70V as you recommended.
Kind regards
Pedro

NB100 hotkeys problem after BIOS upgrade

Hello,
after i've updated the bios to version 1.60 some hotkeys, like brightness setting (fn+f9/f10) or the mute (fn+f6) are not working anymore when the operating system starts, they work instead before o.s. loads. I'm using Windows Vista atm. I've tried to reinstall it too but nothing changed.
I really hope to receive some help so thanks in advance ;)
Best Regards

I dont think its the BIOS. Ive run vista ultimate on mine since ive had it, the hotkeys have never, in my case, worked with Vista. Even if i load the Toshiba hotkey utility it refuses to start and wont run in compatibility mode either. I think its a sacrifice we have to put up with, unless Toshiba update the utility to support vista. Personally I doubt they will do this as the machine is shipped only to support Win XP.

Help Please - X200 will not boot after Bios Upgrade - keeps asking for power on password

Hi there,
I am new to this forum and please let me say a big Thank You for your help in advance.
I am using a lenovo thinkpad x200 running windows vista with service pack 1.
The laptop has always been running fine and has never given me any issues. Unfortunately, all this came to an end yesterday when I ran the system assistant which did a round of updates and it prompted me to reflash my bios.
I did what was instructed and closed all open applications and after the laptop restarted, there was a noise from the harddisk (the sound was basically like what happens if the harddisk suddenly loses power). Then, all i got was a black screen, no harddisk acitvity with only the power cable LED and another LED (with the shape of a N tiled at 20 degrees) on.
I searched the forum and did what was suggested in this entry: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...
This is what I did so far"
I turned off the power, took out the backup battery and waited for about 30 minutes (repeated this step several times, also removing the harddisk) but to no avail.
I removed the RAM and tried booting and there was that characteristic beeping sound.
I replaced the RAM, redid the CMOS clearing, and now there is the Lenovo startup screen. However, there would be an error code 0271 (no date time) and 0251 (something about default configuration). Then, these disappear and all I am left with is the Bios Power On password prompt. Somehow no matter what I type nothing can be input into the field (and I did not create any password as far as I can remember).
I redid the clearing for the power on password by removing the backup battery as suggested at the bottom of this page http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-59377 but it is no use. Each time I restart, even if I press the blue Think Vantage button or F1 or F11, I still get the same 0271 and 0251 error messages and am left with the power on password prompt.
I am really desperate as I really like my lenovo x200 and there is important data on the laptop. I would appreciate any suggestions on how I can solve this. Its amazing how a simple update can turn into such a disaster. Now i know i should never upgrade or update my Bios (or at least proceed with extreme caution).
Anyone can provide some help to get my laptop workin again?
Thank you very much,
Mark

try reflashing your bios?
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-70348
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

DataSource problems after BW upgrade

DataSource problems after BW upgrade
Upgrade from
SAP NetWeaver 2004s: SAP_BW 700 0012 SAPKW70012
to
SAP EHP 1 for SAP NetWeaver 7.0: SAP_BW 701 0007 SAPKW70107
BW system: PI_BASIS 7.01 SP 6
ECC/source system: PI_BASIS 2005_1_700 SP 11
Problem exists throughout, both with generic and standard DataSources.
Here is one specific example:
Generic DataSource ZXXXXXXXX
InfoPackage "ZXXXXXXXX(ZXXXXXXXX)" does not run. Error:
DataSource ZXXXXXXXX(SOURCESYS) must be activated
Message no. RSDS179
Then followed these steps:
1. Replicate Metadata from source system
2. Report RSDS_DATASOURCE_ACTIVATE_ALL from SE38 for source system SOURCESYS and DataSource ZXXXXXXXX
Errors returned:
Inconsistent user object ZXXXXXXXX SOURCESYS for PSA /BIC/B000XXXX
Error saving DataSource ZXXXXXXXX SOURCESYS
DataSource ZXXXXXXXX (SOURCESYS) could not be activated
When I try to choose "Manage" from the context menu for the DataSource, I see an error:
Invalid DataStore object name /BIC/B000XXXX: Reason: No valid entry in table RSTS
Message no. RSM1294
The following notes have not helped:
https://service.sap.com/sap/support/notes/1377274
https://service.sap.com/sap/support/notes/1383711
https://service.sap.com/sap/support/notes/1489064
https://service.sap.com/sap/support/notes/1056060
And no other SDN threads seem to give fruitful suggestions.
Any ideas?

Hi,
Just to help the folks out here.
In my case,
Inspite of going through several valid NOTES & program, my issue didnt resolve (you reply was pretty accurate - but dint help me :-)).
I have resolved the issue by adjusting the PSA table for the same.
Procedure:
Take the psa name --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
Just in case anyone who come across this problem, can do the above steps.
Regards,
Dubbu.

I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
It might be something in your backup.

I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable DVD/USB stick to install using this free program.
Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
Mavericks is supposed to be released this fall, so you may want to wait.

Login problem after testing upgrade today

Yeah problem after upgrade again After i enter my username and password to login to Gnome, i get the message
Your session only tested less than 10 seconds. If you
have not logged out yourself, this could mean that there
is some installation problem or that you may be out of
diskspace. Try logging in with one of the failsafe
sessions to see if you can fix this problem
I sure am not out of disk space so what could the problem be? I am using windows for now till i can find a solution.
Thanks.

Sigi wrote:
first do a
pacman -Sy libstdc++5
and see if this solves your problem (more info here)
If this doesn't help post you /var/log/Xorg.0.log, please
Cheers Sigi
libstdc++5 has already been installed. Anyway here is the Xorg.0.log and xsession.errors files
Xorg.0.log
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.16-ARCH i686
Current Operating System: Linux archlinux 2.6.16-ARCH #1 SMP PREEMPT Mon May 22 21:36:23 CEST 2006 i686
Build Date: 04 May 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 29 19:11:49 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** ATI Radeon (generic) [radeon]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc,/usr/share/fonts/75dpi,/usr/share/fonts/100dpi,/usr/share/fonts/TTF,/usr/share/fonts/Type1"
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2570 card 1043,80a5 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24d2 card 1043,80a6 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,24de card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 1043,80a6 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24db card 1043,80a6 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 1043,80a6 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24d5 card 1043,8095 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5961 card 1002,2002 rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5941 card 1002,2003 rev 01 class 03,80,00 hdr 00
(II) PCI: 02:09:0: chip 14f1,2f00 card 13e0,8d85 rev 01 class 07,80,00 hdr 00
(II) PCI: 02:0e:0: chip 104c,8023 card 1043,808b rev 00 class 0c,00,10 hdr 00
(II) PCI: 02:0f:0: chip 10ec,8139 card 1043,80b3 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfe900000 - 0xfe9fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd7f00000 - 0xf7efffff (0x20000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[1] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[2] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[3] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc RV280 [Radeon 9200] rev 1, Mem @ 0xe8000000/27, 0xfe9f0000/16, I/O @ 0xa800/8, BIOS @ 0xfe9c0000/17
(--) PCI: (1:0:1) ATI Technologies Inc RV280 [Radeon 9200] (Secondary) rev 1, Mem @ 0xe0000000/27, 0xfe9e0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[1] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[2] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[3] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[4] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[5] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[6] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[7] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[8] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[9] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[12] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[15] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[18] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[20] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[21] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[22] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[23] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[1] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[2] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[3] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[4] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[5] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[6] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[7] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[8] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[9] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[12] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[15] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[18] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[20] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[21] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[22] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[23] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[6] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[7] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[8] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[9] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[10] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[11] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[12] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[13] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[14] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[17] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[18] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[22] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[23] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[24] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[25] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[26] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[27] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[28] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[29] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[30] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[31] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.0.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.25.18
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
RADEON 9200 (RV280 5961), RADEON 9000 (RV280 5962),
RADEON 9200 SE (RV280 5964), FireMV 2200 PCI (RV280 5965),
MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
RADEON 9600 PRO (RV360 4152), RADEON 9600 (RV350 4E51),
MOBILITY RADEON 9600/9700 (M10/M11 4E50),
MOBILITY RADEON 9500 (M11 4E52), MOBILITY RADEON 9550 (M12 4E56),
RADEON 9500 (R300 4144), RADEON 9600 TX (R300 4146),
FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44),
RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46),
FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148),
RADEON 9500 (R350 4149), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), RADEON 9600 (RV351 4155),
RADEON 9800 PRO (R350 4E48), RADEON 9800 (R350 4E49),
RADEON 9800 XT (R360 4E4A), FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
FireGL V3100 (RV370 5B64), FireMV 2200 (RV370 5B65),
MOBILITY RADEON X300 (M22 5460), MOBILITY RADEON X300 (M22 5461),
MOBILITY RADEON X600 (M24 5462), MOBILITY FireGL V3100 (M22 5464),
RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 SE (R420 4A4F),
RADEON X800 XT Platinum Edition (R420 4A50),
RADEON X800 VE (R420 4A54), RADEON X800 (R423 5548),
RADEON X800 PRO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 GT (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
MOBILITY RADEON X800 (M28 5D4A), RADEON X800 XL (R430 554D),
RADEON X800 GT (R430 554E), RADEON X800 GTO (R430 554F),
RADEON X850 XT Platinum Edition (R480 5D4D),
RADEON X800 GTO (R480 5D4F), RADEON X850 XT (R480 5D52),
RADEON X850 (R481 4B48), RADEON X850 XT (R481 4B49),
RADEON X850 SE (R481 4B4A), RADEON X850 PRO (R481 4B4B),
RADEON X850 XT Platinum Edition (R481 4B4C),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
MOBILITY RADEON X700 (M26 5653), MOBILITY RADEON X700 XL,
RADEON 9100 IGP (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62),
RADEON X1800 (R520 7100), MOBILITY RADEON X1800 (M58 7101),
MOBILITY RADEON X1800 (M58 7102), MOBILITY FireGL V7200 (M58 7103),
FireGL V7200 (R520 7104), FireGL V5300 (R520 7105),
MOBILITY FireGL V7100 (M58 7106), RADEON X1800 XT (R520 7108),
RADEON X1800 PRO (R520 7109), RADEON X1800 SE (R520 710A),
RADEON X1800 (R520 710B), RADEON X1800 (R520 710C),
FireGL V7300 (R520 710E), FireGL V7350 (R520 710F),
RADEON X1300 PRO (RV505 7143), RADEON X1300 (RV505 7147),
MOBILITY RADEON X1300 (M52 714B), MOBILITY RADEON X1300 (M52 714C),
RADEON X1300 (RV505 715F), RADEON X1300 XT (RV515 7140),
RADEON X1300 PRO (RV515 7142), MOBILITY FireGL (M54 GL 7144),
MOBILITY RADEON X1400 (M54 7145), RADEON X1300 LE (RV515 7146),
MOBILITY RADEON X1300 (M52 7149), MOBILITY RADEON X1300 (M52 714A),
RADEON X1300 SE (RV515 714E), FireGL V3300 (RV515 7152),
RADEON X1300 VE (RV515 715E), RADEON X1300 (RV516 7180),
RADEON X1300 (RV516 7183), RADEON X1300 (RV516 7187),
RADEON X1900 (R580 7240), RADEON X1900 (R580 7243),
RADEON X1900 (R580 7244), RADEON X1900 (R580 7245),
RADEON X1900 (R580 7246), RADEON X1900 (R580 7247),
RADEON X1900 (R580 7248), RADEON X1900 (R580 7249),
RADEON X1900 (R580 724A), RADEON X1900 (R580 724B),
RADEON X1900 (R580 724C), RADEON X1900 (R580 724D),
RADEON X1900 (R580 724E), RADEON X1900 (R580 724F),
RADEON X1600 XT (RV530 71C0), RADEON X1600 PRO (RV530 71C2),
MOBILITY FireGL V5200 (M56 71C4), MOBILITY RADEON X1600 (M56 71C5),
RADEON (RV530 LE 71C6), RADEON (RV530 VE 71CE),
FireGL V3400 (RV530 71D2), FireGL V5200 (RV530 71DA),
RADEON (RV530 SE 71DE)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.25.18
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.25g1
(II) ATI Proprietary Linux Driver Build Date: May 18 2006 09:54:44
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.25.1-driver-lnx-268237
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON 9200 (RV280 5961) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[6] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[7] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[8] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[9] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[10] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[11] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[12] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[13] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[14] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[17] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[18] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[22] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[23] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[24] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[25] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[26] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[27] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[28] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[29] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[30] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[31] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x81fe980
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[6] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[7] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[8] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[9] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[10] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[11] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[12] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[13] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[14] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[17] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[18] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[25] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[26] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[27] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[28] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[29] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[30] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[31] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[32] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[33] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[34] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "CapabilitiesEx" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x0dc370dc"
(**) fglrx(0): Option "GammaCorrectionII" "0x06419064"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "(null)"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "EnablePrivateBackZ" "yes"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x0dc370dc
(**) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9200 (RV280 5961)" (Chipset = 0x5961)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x2002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xe8000000
(--) fglrx(0): MMIO registers at 0xfe9f0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI RADEON 9200
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: V280
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib/xorg/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.25.18
ABI class: X.Org Server Extension, version 0.2
(EE) fglrx(0): Fail to initialize ASIC in kernel.
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): Connected Display1: CRT on primary DAC
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PAT Model: 2002 Serial#: 189
(II) fglrx(0): Year: 2004 Week: 44
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): GTF timings supported
(II) fglrx(0): redX: 0.631 redY: 0.354 greenX: 0.294 greenY: 0.596
(II) fglrx(0): blueX: 0.143 blueY: 0.087 whiteX: 0.300 whiteY: 0.340
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) fglrx(0): #3: hsize: 1024 vsize 768 refresh: 70 vid: 19041
(II) fglrx(0): #4: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) fglrx(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) fglrx(0): #6: hsize: 800 vsize 600 refresh: 70 vid: 19013
(II) fglrx(0): #7: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 140 MHz
(II) fglrx(0): Serial No: 00189
(II) fglrx(0): Monitor name: LCD-MONITOR
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 8
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 250/164MHz @ 50Hz [enable load balancing]
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(**) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 39 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 772 817 interlace
(**) fglrx(0): Default mode "1024x768": 100.2 MHz (scaled from 0.0 MHz), 72.8 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1024x768" 100.19 1024 1088 1200 1376 768 769 772 809 +hsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 +hsync
(**) fglrx(0): Default mode "1152x864": 119.7 MHz (scaled from 0.0 MHz), 77.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 +hsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.77 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.68 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.29 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384" 19.68 512 528 576 632 384 384 385 416
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 150 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 150 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 120 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 120 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 100 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 100 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (340, 270) mm
(--) fglrx(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x00000af0
(==) fglrx(0): OpenGL ClientDriverName: "atiogl_a_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(**) fglrx(0): EnablePrivateBackZ = YES
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B]
[1] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[8] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[9] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[10] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[11] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[12] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[13] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[14] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[15] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[16] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[17] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[18] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[19] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[20] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[24] 0 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[27] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[28] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[29] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[30] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[31] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[32] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[33] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[34] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[35] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[36] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[37] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM Bus area: 0xe8701000 (size=0x078ff000)
(II) fglrx(0): UMM area: 0xe8701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 99.8
(II) fglrx(0): detected X.org 7.0.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xe8000000 FBMappedSize: 0x08000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 7163
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard1: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
AUDIT: Mon May 29 19:12:06 2006: 3974 X: client 3 rejected from local host
AUDIT: Mon May 29 19:12:06 2006: 3974 X: client 3 rejected from local host
xsession.errors
/opt/gnome/etc/gdm/PreSession/Default: Registering your session with wtmp and utmp
/opt/gnome/etc/gdm/PreSession/Default: running: /usr/bin/sessreg -a -w /var/log/wtmp -u /var/run/utmp -x "/opt/gnome/var/gdm/:0.Xservers" -h "" -l ":0" "napoleon"
/opt/gnome/etc/gdm/Xsession: Beginning session setup...
/opt/gnome/etc/gdm/Xsession: ssh-agent not found!
/opt/gnome/etc/gdm/Xsession: Setup done, will execute: /usr/bin/dbus-launch /opt/gnome/bin/gnome-session
Failed to start message bus: Failed to read directory "/opt/kde/share/dbus-1/services": No such file or directory
EOF in dbus-launch reading address from bus daemon
thanks

External USB keyboard does not work with T60 after BIOS upgrade

External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
t

Hi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Idle power management features on processor disabled due to a firmware problem - after BIOS update

Hi,
I did a BIOS upgrade on my E20 - 4220-CTO to 5JKT55A and I started seeing these messages in my System Event log ->
"Idle power management features on processor 0 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
"Idle power management features on processor 1 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
"Idle power management features on processor 2 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
"Idle power management features on processor 3 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware."
The messages occur on each reboot.
I upgraded to the latest bios 5JKT56A and I get the same messages.
I was not getting these error messages on BIOS level 5JKT47A(ship from lenovo with this level).
I updated my BIOS as it was suggested on the lenovo site before doing the win7 SP1 update. Note - I got the error before and after the SP1 update so it's not related to SP1.
I have not see any additional issues, just the messages in the event log on each boot.
Any ideas?
Thanks in Advance!

5JKT58A is the current E20 BIOS. have you tried it yet?
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-74761
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Problems after BIOS update on DKA790GX Platinum

Hi,
I have set up a pc with the DKA790GX Platinum (MS7550). The config:
- Phenom 8750
- Silverstone 400W PSU (fanless)
- 2x2GB Crucial PC5300
- Pioneer Blu-ray
- Seagate Momentus 5400.4
(this is a HTPC setup...)
The pc started up fine and I installed the OS. I had the board connected to my monitor through HDMI.
After updating the BIOS the board went all black on me. I tried connecting a floppy-drive to recover to a older BIOS-version, but could get the board to do that. I then tried different monitor-connections, but nothing.
I then installed a Gigabyte Radeon HD 4870 1GB-board I had laying here, and board seems to boot somehow - all graphics are messed so I can't read whats on the screen, but at least I get some kind of image. A little unsure on how the PSU handle that videoboard.
Anyone know if the 1.2 BIOS-update maybe is set to <swearing removed> the integrated video by looking for a videoboard in the system? Have a Asus 9800GT Matrix-board in a another pc here - maybe I remove that and try it in the new pc, but... argh..
This ain't funny at all anymore. I had a P45 Platinum dying during a BIOS upgrade. I had a P45 Diamond that dosn't want to boot anymore, and now this... MSI-motherboards really don't want to be friends with me at the time :-|

Hi have exactly teh same problem,
On Dec/2008 I have set up a PC with DKA790GX Platinum (MS7550 ver 1.2), Phenom 9750, 1 120GB hd, 4 MB corsair xms2 ddr2 800mhz, psu 500w. I installed the win xp pro OS. I had the board connected to my monitor vga. After updating the BIOS (with live update utility) the board went all black on me (the fan, PSU, hd starts normal). I test the PSU, HD and the memory, but the problem still continue.
Two days after, the PC start normal, but I don't know what was the problem.
Aleatory when try to start the PC, sometimes I get exactly the same problem, but, Yesterday, I try again to work with me PC and now i have the same problem.
What can i do to fix this problem?

K7n2-L wont boot after bios upgrade

I have been very happy with the motherboard since i bought it in april 2003, been very stable and only had minor usb problems. And i finally decided to upgrade the bios from v. 3.7 to v. 4.1.
After the upgrade the machine boots up to the first windows that shows me the memory and the hard disk i have installed. I can also go into BIOS.
But the PC stops when its about to start booting up the HD or CDrom. According to the lights on the D-Bracket its trying to initializing the floppy controller.
There has never been a floppy drive in this PC before(i booted the PC on CDROM when i upgraded the BIOS).
I have tried the following things without success;
installed a floppy drive.
Cleared the CMOS(with the jumper)
Unplugged the cdrom and the hard disk.
Tried every memory configuration.
jumped the safe mode jumper.
It seems to me that i can only fix this by changing the BIOS chip....or the mainboard.
Anyone had this problem?

Azraeliz,
Sounds to me like perhaps you've overlooked a setting in the BIOS
Did you take note of the BIOS settings prior to flashing so you could put the settings back the way they were?
nuckelavee,
I suggest you start your own thread. I have a hard time believing there is no CMOS jumper.
Tried this? ***Starting your K7N2 Delta2 at default settings***

Not booting after BIOS upgrade in T500

I upgraded my T500 from BIOS 3.09 to 3.18 using the windows upgrade utility (6fuj42us.exe?). The upgrade went fine. I rebooted the machine and got the login windows screen (I have windows XP professional). However, the instructions of the BIOS upgrade called to enter into the BIOS and press the F9 key in order to set all the system defaults. After that the machine did not boot. It gives me the initial windows booting screen (windows flags) and then a blue screeen. I downgraded the BIOS to 3.15 using the bootable CD utility (6fuj39uc.iso?). The downgrade went fine. I can get into the BIOS but have exactly the same problem when loading windows. Unfortunately I could not find a similar bootable program for BIOS 3.09 only the windows executable program (6fuj34us.exe?). Is there any fix other than reinstalling windows? Thanks.

Hi malope,
please enter the Bios and check the HDD is switched to compatible mode instead of AHCI Mode.
Maybe than you can start Windows.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

X120e: Suspend problems after BIOS upgrade.

Similar Messages

Maybe you are looking for