X121e Mobile Broadband not found

I bought lenovo x121e with integrated mobile broadband in uk
Its work some what good for the past three months
if i have problem with ericsson f5521gw i simply load my bios to default settings.
Currently i upgraded to windows 8 it worked well for few days.
But now i didnt found ericsson f5521gw in the device manager.
I dont know what to do
please give the solution to my problem.

hey ditton01,
when you go to Device Manager and look at the integrated mobile broadband, was the brand attached to it ?
anyway, try removing Access Connection and use Windows built-in connection wizard.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Similar Messages

HP Pavilion split x2 r-100dx Mobile Broadband Not Working

I have recently purchased my HP pavilion split x2 r-100dx from Best Buy.
Following are the details about the product :-
(a)   Product name: HP Split 13 x2 Detachable PC
(b)   Product number: G6Q91UA#ABA
(c)   Serial number: [edited Serial Number by Moderator]
(d)   Windows 8.1 64-bit
(e)   Network Adaptor HP lt4114 LTE 4G Module (As Shown in device Manager)
It has 4g LTE mobile broadband SIM Slot.
My Tablet plus Notebook is unlocked. But there was a verizone SIM inside the slot.
Which may mean that its not unlocked and its locked to Verizone.
Since its recipt, its Mobile Broadband settings Show the SIM Card details but NO SIGNAL.
I have tried the following :-
(a) I have tried HP Online Support but they couldn't solve the issue.
(b) Tried installing HP Connection Manager which says there is not WWAN Device Detected.
I am stuck. I have paid extra 100 Bucks for its international version to be factory unlocked so that I can use my local Mobile Broadband SIM but of no use.
Does any one know this issue or help me in this regard.
Thanks in advance.

Glad to hear you got it resolved. I finally had to exchange mine for a new one and from the startup has been working as expected. The original tech at Best Buy did not connect to power before he tried to start the computer the first timne. It is the first item in the start up instructions. May have created the problem, but don't care now.awdavis01 wrote:
Well, after hours of time at AT&T and on the phone with HP along with prerequisite wailing of voices, gnashing of teeth, and beautifully executed dances, we have determined that HP is not the problem, and neither is AT&T. It is a frequency mismatch. What we have determined is that not all GSM is created equal. As one tech in Philadelphia said "We have people bring their GSM phones in here from other carriers and they won't work on the AT&T GSM network". From what we have determined, the HP hardware is setup to work with a set (unknown to this writer) of specific GSM frequencies suited to Verizon's network. The hardware is not locked (I repeat - not locked) to Verizon, it's only using the frequencies that Verizon likes. If you find another carrier (AT&T isn't one of them) that can provide network support using the same GSM frequencies as Verizon, then you're probably going to be OK. We took the laptop to Verizon today and it works great with their sim card.  So when the line forms to call me a dullard, quotations of deeply technical contradictions to my statements erupt, and rocks are thrown with abandon, realize this - I don't care if you disagree. This is what we've determined and have made it further than anybody else towards a rational explaination. If you make further progress, trust me - I'll read it.

Mobile modem not found

my mobile modem Huawei E352 works without any problems on my mac book pro 17" but my mac book air does not recognize the device when is plugged in?
The USB hubs are working, mac air is up to date i can not see a reason when i plug in the USB modem why the mac air does not see it?
any help

Hi
You could try to install or update the 3G driver once again.
You can download this here:
http://aps2.toshiba-tro.de/wlan/

HT1926 When downloading iTunes I keep getting the message about Apple Mobile Device not found or something like that?

I keep having issues trying to get itunes installed. I did the recent update and it kept telling me a file was missing. I then uninstalled the whole program. And now when I'm trying to install it. It is telling me something about an error with Apple Mobile Device or Support.

Hi ALCNYC
Thanks for using Apple Support Communities. It sounds like you may need to restart the Apple Mobile Device Service. This article has instructions for doing this:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying a thorough uninstall and reinstall of iTunes as described here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari

Fennec 1.1a1 for Windows Mobile file not found

The download links in http://www.mozilla.org/projects/fennec/1.1a1-wm/releasenotes/ are broken, and lead to 404 errors. When I go to the FTP daemon directly and look around, I find that ftp://ftp.mozilla.org/pub/mozilla.org/mobile/releases/winmo/ doesn't contain a 1.1a1 or 1.0a4 folder; the last one is 1.0a3. Where should I be looking for this file?

I don't know why the links from that page are broken, but you can find some of the last 1.1 alpha "nightly" builds for Windows Mobile here:
http://ftp.mozilla.org/pub/mozilla.org/mobile/nightly/2010/03/2010-03-22-02-mobile-1.9.2/

Windows Mobile SDK not found?

Hi,
I just downloaded Adobe Mobile Packager and all the SDKs (I
already had Windows Mobile 6 SDK).
But when I click on "Create New Package" I get a dialog
telling me that I don't have Windows Mobile SDK, and if I ignore it
I can only create packages for Symbian. Please help...
Also, the CAB SDK is an exe/zip file... where should we unzip
it, as it has no setup?
Thanks,
Benjamin

Hello,
Originally, I installed the Package Manager without the
proper SDKs. I have now downloaded and installed all of the proper
SDK's including the Windows
5 Mobile SDK (which is the device that I am trying to
target) at the following location C:\Program Files\Windows CE
Tools\wce500\Windows Mobile 5.0 Pocket PC SDK. I uninstalled the
package manager and reinstalled. However when I start the package
manager, I am still getting the error described above of cannot
find "Windows Mobile SDK".
Any suggestions,
Windows XP sp3
Thanks,
G

T410 broadband device not found

Hello
I am trying to get the built in broadband device work (of course i have purcached the device and installed the hardware aswell as all the required softwares and driver which means the qualcomm gobi 2000 usb composite device 9205 driver and all the thinkvantage sofwares: access connection, active protection system, keyboard customizer utility, mobile broadband connect)
What i'm experiencing is that in the wireless connection status window / mobile broadband tab , under the connection status i see that it has recognised the t-mobile network i should be able to connect to. It says that i have a working connection for minutes with a good quality signal, but when i actually try to connect through the acces connections i get the error message of "connection failed" and i have the two options: "help me fix this" and "close" after i chose the help it goes to the diagnostic tools where the connection status is "not connected" cause "service provider not found" ...then i go to the "sign-up and support" button which leads me to the mobile broadband connect window where i get the following error "no wireless mobile broadband device found" and at the background it also says mobile broadband device not found.
I have tried to reinstall all the drivers and softwares replacing them with the latest ones which didn't have any effect on my problem.
Also i have checked the BIOS settings or my computers wireless settings in-case something is wrong, but everything was set as it should.
At last i have updated the BIOS to the latest one found on your site ( which is 1.32 2010/09/17) but still no change, and i am absolutely sure that the hardware device is installed correctly onto the laptops board.
I'm attaching a capture of the sreen which contains most of the details you need to know, in case i have missed something please let me know.
http://noob.hu/2010/11/15/Capture.JPG
Thank you in advance.
Best regards.
Gergő Csorba
B.Braun Medical Ltd.
Moderator edit: Converted pic >50k to link per the Community Rules. Removed Gergő's mobile number so that he doesn't get an unwanted fan club texting and calling.

Here's the Link for the 2539-AJ6, it does indicate that you have Bluetooth. Dowload and install the latest drivers.
http://support.lenovo.com/en_US/downloads/default.page?

Mobile Broadband Unit not found for T400 WAN

Hello,
I've got a Lenovo T400 27658JG with Win 7 64bit and I try to activate my Mobile Broadband Unit.
I've loaded down the driver: Lenovo Mobile Broadband Version 3.5.0011 and the ericson and AT&T driver (which worked properly on XP)
When i'm launching the exe I got the following message:
Mobile Broadband Unit is not found.
It would be nice if somebody could help me
Thanks in advance
Solved!
Go to Solution.

jhs wrote:
I've got a Lenovo T400 27658JG with Win 7 64bit
This is the configuration for a 2765-8JG
P8700(2.53GHz), 2GB RAM, 320GB 5400rpm HD, 14.1in 1440x900 LCD, 256MB ATI Radeon HD3470, CDRW/DVDRW, Intel 802.11agn wireless, WWAN option, Bluetooth, Modem, 1GB Ether, UltraNav, Sec Chip, FPR, Camera, 6c Li-Ion, Win7 Pro 32
WWAN option means that it has the SIM card reader and WWAN antennas fitted but there is no WWAN card fitted, so that is why the Mobile Broadband Unit is not being found!
Cheers,
Bill
I don't work for Lenovo

Mobile Broadband Activation - my country is not featured in the list

Hi my unknown friends. I assembled a modem to my W530 and during instalation of the "Mobile Broadband Activation" application I was asked to "select the country where I was located". Unfortunate I currently live in Iceland but Lenovo does not seem to know this country, to which they sell so much of their stuff and have they authorized service and shop there, even existed and did not deign to place it on the list. They even did not bother to put there an option like "other". What should I choose to properly and correctly complete my installation process? Thank you in advance.
With regards
Wojciech
Moderator Note; profanity / implied profanity edited. Keep it clean! Forum Rules

hello guys, i live in lebanon too and i was so frustrated by this. however i found the solution. when setting up icloud keychain, before creating a password for the keychain press on advanced options and choose not to create a password. you will ahve to use your account password to activate keychain on other device. this will bypass the sms confirmation

Windows 7 not recognizing device - Dell Wireless 5620 EVDO HSPA Mobile Broadband Mini Card

Windows 7 is not recognizing my Dell Wireless 5620 EVDO HSPA Mobile Broadband Mini Card (Qualcomm Gobi 2000). I can't even uninstall the driver, it says that I don't have "sufficient permission" to stop device or something to that effect
(though I'm an administrator). I also can't re-install the same or different driver. I might have installed the wrong driver, though this is supposed to be the correct one according to Dell after typing in my service tag. I went to the FTP
to get one specifically for "Verizon Wireless", but I can't uninstall the prior driver.
How can I fix these issues? Thanks.

Hi,
Any update?
Have you tried safe mode mentioned in the first reply? What is the status of the driver in device manager? For "Verizon Wireless", have you installed any verizon software or related verizon device? Uninstall this kind software, then uninstll driver again
as a test.
Contact this support, maybe they can give some different ideas.
Verizon Wireless Support
http://www.verizonwireless.com/support/
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Mobile Broadband Connect not working on x301

Hi
I definitely cannot get mobile broadband working on my UK x301
I have a fully updated system with all the Win7 Drivers (using both System update 4 and further manual downloads) and I found a Win 7 version of Mobile Broadband Connect however when loaded it hangs on Initialising... for ages and then complains that "the sim card present on the system cannot be read"
Can anyone help please?

That has been on issue ever since RC1. The Ericsson Broadband Modem only seems to work in specific combinations of older drivers. Also not every access connections version seems to behave nicely in combination with it. My success rate in configuring those has been approx 50% and I gave up.
I did manage a 100% success rate though with all most recent drivers + the specific 7uw706ww ericsson package from the beta website.
There's one catch though. This driver seems to be capped at 384Kbps e.g. stuck in UMTS mode.
For me that's enough to last until proper drivers come out, but it is higly irritating.
Lenovo Premium Business Partner
X1 Carbon Touch | i7-3667U | 8Gb | 256Gb | HD 4000 | 14HD+ | WWAN | W8.1 Pro RTM x64 |

WRT54G3G – "Router not found" when trying to configure broadband cable network

Hi,
I have a WRT54G3G, v.1.1 router. I have used it successfully for ~3 years with mobile Internet (Huawei E800 card). Recently I installed broadband cable network in my place, tried to configure WRT54G3G to work with it and failed…
I tried manual configuration, and I was not able to set it up. I downloaded „Setup Wizard”, and tried all three options:
a) 3G/UMTS or GPRS
b) Broadband WAN Only
c) Broadband WAN and 3G/UMTS or GPRS
Only option a) can be completed successfully. When I try b) or c), I get following message from „Setup Wizard”: „Router not found, Please make sure the router is properly connected and try again.” I am sure I connected all cables as instructed.
When I plug cable network directly to my PC’s Ethernet slot, it is automatically configured, and all is working fine.
Can anyone advise please what to do? Thank you!
Best regards,
Jakub
Solved!
Go to Solution.

What is the ip address of your router? It seems like the WRT54G3G is already talking to your modem and is getting the connection properly. Make sure that the WRT is not on the 192.168.1.x segment.

Mobile broadband (un2430) not working with Windows 10 on Folio 9470m

I have had Windows 10 installed on my HP Folio 9470m since October last year (insider program). One thing that I never been able to get to work is the mobile broadband device (un2430). It simply says "Radio off". All attempts to re-install driver (which shows as "working"), disable/enable the device etc etc just leads to same result, that the "Radio is off".I googled this a couple of times and found that other users have the same problem. Also colleagues of mine with same model has also the same problem. It works just fine under Windows 8.1. Anyone has a workaround? I was really disappointed when W10 was released that HP did not update the drivers-page with W10 drivers:http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5271102 How can I find out when/if HP will release W10 drivers, including support for mobile broadband, for the HP Folio 9470m?

Thank you for your reply. I've tryed several SIM cards, and arrived to the conclusion that it doesn't work with portuguese operator TMN (all the SIM i've tried from TMN lead to the same result)!
I guess that there is some misconfiguration on WM config files. I found one xml with default configuration for worldwide carriers, and maybe it is possible to change some of those parameters to make it work... I just don't know wich one!
Maybe I'll have some luck, of someone reading this, and that is able to give me a tip to solve the problem.
The SIM card just work well on a 3G usb stick, or even in a celular phone!
Thank you again.

Stream 8 tablet location does not work on T-mobile broadband

On my HP Stream 8 tablet, location works fine with GPS only (GNSS on; Mobile Broadband, Wi-Fi, and Bluetooth off).
However, if I turn on Mobile Broadband and connect to T-Mobile and turn off GNSS (or GNSS on inside where there is no GPS signal) and keep Wi-Fi and Bluetooth off, the location gives very odd results. Last week the map showed Phoenix as my location (I am actually located in San Francisco). This week, it gives Brentwood or Clayton, CA, both more than 30 miles away.
HP tech support said call T-Mobile. T-Mobile said they had occasionally seen equally odd locations.
I went to a nearby T-Mobile store. They had a Samsung Galaxy Tab 4 which always gave a correct location, within 100 feet using T-Mobile alone. Manually moving the map to a different location in an attempt to confuse it and turning it on and off, it would still find the correct location. No surprise there, my three year old Virgin Mobile LG android cell phone does just as good a job at finding locations.
(The T-mobile store also had an iPad Mini 3 that I was able to confuse. On T-Mobile alone and clicking on My Location in maps, it produced a grid that was blank except for a line saying that it was unable to find a location, no info or link to what to do next. The T-Mobile store did not have a Stream 8. The Microsoft Store has a Stream 8 but it is not connected to Mobile Broadband.)
Does anyone else have this problem? Is my unit defective? There are times that a GPS signal is unavailable and a T-mobile broadband signal is available, and it seems that this unit should be able to find a location at least as well as my cell phone.
Thanks.

I see the same basic results, wifi=off, bluetooth=off, gnss=off, t-mobile=on. Open win8.1 map-app shows my location in LA south of the 101/110 junction. I'm in SF Bay area near San Jose about 400 miles away. Turn on wifi and map-app shows me at my real address. With t-moile only, opened win8.1 IE, went to www.bing.com/maps location also shows LA.
My only t-mobile account is the stream8 free 200mb/month data plan, don't think they have my real address anywhere. My t-mobile "phone" number is 720 area code in the Denver area. No idea why middle of LA is the t-mobile location. Must be a "feature, not a bug".

Can some one help me with diagnostic test result " apple mobile device driver not found"?

I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0013AC2C08548378
Current user is an administrator.
The current local date and time is 2012-06-28 15:23:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address:             192.168.1.3
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Thu Jun 28 15:17:19 2012
Lease Expires:       Fri Jun 29 03:17:19 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help.

X121e Mobile Broadband not found

Similar Messages

Maybe you are looking for