X1600 in the 15-Inch Vs. 17-Inch

I've heard rumors that the video card in the 15-Inch MacBook Pro maybe slower than the one in the 17-Inch MacBook Pro. My question is: is that true? And if so, is it worth getting the 17-Inch for that reason?
See, I personally want a fully loaded 15-Inch because I think 17-Inches is just too big...

The card in the 15Inch in underclocked, probably due to all the heat issues with that model. The one in the 17inch is closer to the actualy manufacturer's specs, so it will most probably perform better.
The 17" isn't that big compared to the 15". Just check it out at a store and see for yourself, I think you'd be surprised.

Similar Messages

  • This month I just purchased a 27 Display with Thunderbolt. I have a 17 inch MacBookPro with the mini DisplayPort. How do I connect my MacBook Pro to the 27 inch Thunderbolt Video display.

    This month I just purchased a 27 Display with Thunderbolt. I have a 17 inch MacBookPro with the mini DisplayPort. How do I connect my MacBook Pro to the 27 inch Thunderbolt Video display.

    Mini-Display Port == ThunderBolt.
    In other words, just plug it in.

  • I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

    I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini with a thunderbolt cable. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

    Hi there,
    The simplest way is to drag it across wirelessly using the 'Airdrop' application once both computers are near one another. 'Airdrop' can be found near the top, on the left hand side menu, within 'Finder'.
    AJ

  • What is the power consumption of the 15 inch rMBP?

    I have the 15 inch Early 2013 Retina MacBook Pro. Does anyone have the specs for power consumption while the laptop is charging but asleep? I ask because I have an "eco" surge protector that I'm trying to confgure but I think the rMBP uses over 15W when it is charging so I can't use the surge protector "auto shut off slave outlets" feature. Thanks in advance.

    See > http://images.apple.com/environment/reports/docs/15inch_macbookpro_retina_per_fe b2013.pdf That's all the information we know about this

  • Does the standard Intel HD Graphics 4000 in the 13 inch Macbook pro stand up to other graphics cards with dedicated memory ( 1GB of memory for instance)?

    Does the standard Intel HD Graphics 4000 in the 13 inch Macbook pro stand up to other graphics cards with dedicated memory ( 1GB of memory for instance)? I need a laptop for college and the Engineering program suggests a dedicated video card with minimum 1GB of video memory.

    I have a Intel HD 4000 in my Mac Mini (late 2012), and it's okay for what I need it.
    However:
    - there were a few issues with flickering on the video output to external monitors. These were solved through a firmware update that came with OSX 10.8.3 - for the majority of the users. There is apparently still a small group of users that still has issues. You can read long threads about this here:
    https://discussions.apple.com/thread/4472316?start=0&tstart=0
    and here
    https://discussions.apple.com/thread/4490924?start=0&tstart=0
    So for most of us (me included) this issue is solved, but it seems that certain displays / monitors don't work well with the intel HD4000, don't know if there is a pattern or a list of monitor models...
    - there was an issue with the color calibration on the HDMI output. No matter how much you tried to calibrate, the results remained unsatisfying. All light colors were crushed to white, wrong contrast, ...
    You can read about this here:
    http://forums.macrumors.com/showthread.php?t=1482487
    https://discussions.apple.com/thread/4480354?start=0&tstart=0
    The same firmware update improved this a little, good enough for me, but I can imagine it's not good enough if you do graphic work and need reliable colors from your monitor. On HDMI output, the thunderbolt/MDP output is fine. So it's mainly a dual monitor setup issue.
    If it's for graphic work, I'd go for a Mac Book Pro with dedicated GPU !

  • Suddenly I can not select anything within the top inch or so of any web page. The scroll bar arrow doesn't work at the top. I don't know what to do. I tried updating my browser but the problem still exists.

    Everything worked fine on Tues. I shut down my system and then on Wed. morning, the problem appeared. Anything within the top inch or so of a webpage is unavailable to select. It is like there is an inch of the page that is dead. It is that way on every website that I visit with Firefox. It does not happen if I use internet explorer, which I do not like and do not want to have to go back to using. Please help!!! My sister in law has the same problem with firefox.

    Hi,
    Please [https://support.mozilla.org/en-US/questions/911441 see this.] You may also want to check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]

  • I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

    I have a 27inch iMac with snow leopard and 1 user, and a 24 inch (older) upgraded to yosemite and 5 users. I want to wipe the 27 inch and transfer everything on the 24 to it. I do have time capsule 3tb but not sure how to do it

    Move your content to a new Mac - Apple Support

  • Recently a problem has developed -- I can't use the top inch of the firefox window -- any buttons there cannot be activated - my cursor is able to move ovber them but can't click on them. What should I do?

    Within the firefox window -- anything in the top inch or so I am unable to use. This is the same for any site. I don't know what has happened and I cannot fix it.
    In that area, I can move the cursor but when I click on things I cannot activate them anymore - an example is I can't go to the shopping basket on Amazon or my account.
    Waht should I do?

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
    Please also see [https://support.mozilla.org/en-US/questions/911441 this.]

  • Fastest hard drive for the 12 inch PowerBook?

    I'm upgrading my sis's powerbook, already bought 1 gig of ram to max it out, now I'm thinking of getting a new hard drive, the one currently inside is a 4200 rpm 60 gig drive, and I'm thinking thats the biggest bottleneck.
    This is the 2004 version of the 12 inch, runs at 1.33 ghz, runs leopard fairly well with only 768 megs of ram, hence the reason I finally buckled down and decided that this thing needs a upgrade.
    So finally to my question, what is the fastest drive possible for this computer? The options seem quite limited considering its an EIDE drive, and it needs to be 9.5mm, so from anybodies experience, can they direct me to the right drive with best performance?
    Thanks so much.
    Vito

    Your best option may be an IDE SSD. I know these aren't the fastest SSDs out there, but I'd imagine their speed as comparable to a 7200 rpm drive. Newegg sells the 32GB SSD for around 90 bucks, which isn't a whole lot more expensive than the 5400 rpm 250GB drive. You get the benefits of a quiet drive, lower power consumption, and really fast read speed.
    Try xbenching your current set up, and the following is what I'm getting:
    Results 64.06
    System Info
    Xbench Version 1.3
    System Version 10.5.6 (9G55)
    Physical RAM 1280 MB
    Model PowerBook6,4
    Processor PowerPC G4 @ 1.33 GHz
    L1 Cache 32K (instruction), 32K (data)
    L2 Cache 512K @ 1.33 GHz
    Bus Frequency 167 MHz
    Video Card GeForce FX Go5200
    Drive Type TS32GSSD25-M TS32GSSD25-M
    Disk Test 64.06
    Sequential 63.90
    Uncached Write 59.12 36.30 MB/sec [4K blocks]
    Uncached Write 74.38 42.08 MB/sec [256K blocks]
    Uncached Read 40.69 11.91 MB/sec [4K blocks]
    Uncached Read 130.43 65.55 MB/sec [256K blocks]
    Random 64.23
    Uncached Write 21.11 2.23 MB/sec [4K blocks]
    Uncached Write 87.35 27.96 MB/sec [256K blocks]
    Uncached Read 1674.03 11.86 MB/sec [4K blocks]
    Uncached Read 350.66 65.07 MB/sec [256K blocks]

  • Whats the difference between the 13-inch: 2.5GHz with Retina display and the 2.6GHz macboock pro?

    whats the difference between the 13-inch: 2.5GHz with Retina display and the 2.6GHz macboock pro?

    http://www.apple.com/macbook-pro/specs-retina/
    At the top of the page youi can cycle between the Macbook Pro specs and the Macbook Pro with Retina specs.

  • Is the 24 inch Apple Cinema Display the best choice for Final Cut Studio 2

    I'm about to order a Mac Pro and Final Cut Studio 2 and have a question about monitor choices.
    Is the 24 inch Apple Cinema Display the best choice are there non-Apple monitors that will do as good or better job with HD editing and output?

    COMPUTER MONITORS bear very little on HD editing and output...especially output. They are just the monitors you use to look at your clips and your timeline. THey work for SD and HD. You really only use them to, well, as I said, see what you are doing. It would be nice to have GOOD ONES so the image looks decent. I use the Dell 24" monitors. The current one is the 2408. Nearly half the price of the Apple 23" displays...and really, the only Apple 23" that exists connects via their new connector, so you need a new MacPro or MacBook pro...or some adapter, to get it to work. And they are not worth the extra money, in my experience.
    Samsung monitors are also good.
    Shane

  • Does anyone know what the length is of the MacBook Air? I have the 11 inch one, but thats the height right?

    I have a MacBook Air, its the 11 inch one, but I would want to know if 11 inch is the height and whats the length or width?

    In the link I gave you in my first comment, there's a "Size and Weight" section where you can get this information. Anyway, here you have this data:
    Height: 0.11-0.68 inch (0.3-1.7 cm)
    Width: 11.8 inches (30 cm)
    Depth: 7.56 inches (19.2 cm)
    Weight: 2.38 pounds (1.08 kg)

  • Mouse doest click or recognize the first inch from below the toolbox down

    '''the mouse doesnt recognize that space, from below the toolbar to an inch dow'''n... ive tried going to different sites but it still doesnt work. but when i use google, i works, but i choose firefox. please help me solve ths problem,,, even the scroll bar wont work when its at its highest.i cant even sign out because its at the 1st inch of the web screen. thank you

    Top of Firefox window non-responsive, toolbars non responsive -- also see [http://kb.mozillazine.org/Problematic_extensions Problematic extensions]
    *caused by Yahoo Toolbar -- https://support.mozilla.com/questions/890908
    *caused by Babylon Toolbar -- https://support.mozilla.com/questions/890670

  • HT1338 why is my MacBook Air running slow and I bought the 11 inch with all memory and turbo boost

    why is my MacBook Air running slow and I bought the 11 inch with all memory and turbo boost

    Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
    Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
    If your browser is Safari, then from the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Any change?
    Quit and relaunch the browser. Any change?
    Log out and log back in. Any change?
    Enable Private Browsing in the Safari menu. Any change?
    Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
    If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
    If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
    Again, if only Safari is involved, open the iCloud preference pane and uncheck the box marked Safari, if it's checked. Any change?
    Are there any other devices on the same network that can browse the Web, and are they affected?
    If you can test Safari on another network, is it the same there?
    If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

  • Can you use the 13-inch MacBook Pro with Retina display straight out of the box, or do you have to charge it first?

    Can you use the 13-inch MacBook Pro with Retina display straight out of the box, or do you have to charge it up fully before you can use it. I do not want to damage the laptop by misusing the battery.

    Attach the charger and start charging the battery to 100%.  The good news is that after you have connected the charger, you may start using the MBP as well.
    Ciao.

Maybe you are looking for

  • GL Account Balance Difference

    Hi All, We recieve GL Account Balances from some other system (different SAP landscape) and the balances in the file are compared to the GL Account Balances in our system. For this purpose, we are using a standard BAPI :->BAPI_GL_GETGLACCCURRENTBALAN

  • How to run the ejb project in j2ee server

    How to run the EJB project. I give like java conveterClient converterClient.jar here conveterClient is class file name and converterClient.jar is deployed file like wise i give some exception is come give some help pls friends

  • Problem with psychedelic colours after encoding in iDVD6

    I'm working on a long project in iDVD6 that just fits on a dual-layer disc. Everything is ok except for one particular movie. This clip starts out in mostly a greyscale colour scheme then dissolves to full colour after a few minutes. In the project,

  • Please check actionsipt3 as not working

    I am trying to convert a flash folio to actionscript 3 I will endevour to describe my timeline setup followed by the frame code that I cannot get to work. At the moment the time frame keeps looping, buttons and AC3 loader/ progress components. I feel

  • FRM-40039 Error

    I am getting an FRM-40039 Message "Cannot attach library Ofg4tel while opening Form ......... The library is in the path......Works for Developer, not to a deployed work station........I took over for another developer, so I'm new at deployment.....w