X2-00 displays "charger not supported" when connec...
my connector is CA-101D,, at first it connects then the next time i try it it doesn't... after more or less five times trying, it worked again i was even able to install ovi.... the after that,, when i connect the cable to the PC again it displays "charger not supported"...... i can't connect.. T_T
please tell me what to do.. thank you....
As per few posts on this forum (..you may use the Search Box at the top of this page to search yourself..) the reason may be a faulty Battery.. but a couple of those posts also mention that when the users once charged another good battery successfully.. the earlier battery also charged without problem afterwards..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...
Similar Messages
-
Cark 91 with CA55 - Charger Not Supported with Nok...
OK, for all you out there help/suggestions are required.
I have a cark 91 car kit and used the ca55 cable to enable this for pop port operation with my nokia 6280. I upgraded the black module box so that it would charge my phone whislt driving, so everything was hunky dory. However, I recently got a new nokia 6288, and when placing this in the car charger, after about 10-15 seconds of charging, I get an error message stating charger not supported. It then stops charging.
It is odd in that the car kit chargers the old 6280, and the same charger that charges the 6280, also charges the new 6288 ok.
I am at a bit of a loss. Any suggestions, other than getting a new car kit?Hi, I have a 6131 which was working just fine for a year, then last sunday I connected it to a USB-based charging plug. Since, it has given the message "Charger not supported" when ever connected to a charger. Any charger. And, unfortunately, the battery is not charged completely due to this, hence I am unable to use the phone for any extended period of time. A rather rare problem, I was still hoping Nokia had published som info about this kind of situation.
-
When I try to play a movie on Netflix from my IPad, I get a pop up saying: Cannot play video. "The connected display is not supported". I have updated my Apple TV, tried restarting it, and have tried using my IPod Touch all without any luck. This display has worked in the past. This just happen a couple days ago.
Any ideas out there?I have been successfully using my Apple TV with my iPad2 to access Netflix through airplay (mirroring) and suddenly it won't work. It says "the connected display is not supported" What's up?
Also when I try to stream Netflix through my Apple TV menu on my television it says "An error occurred loading this content. Try again later. But trying again later doesn't work any better.
Now the only way I can watch Netflix is using my small iPad screen. It appears the problem is with streaming Netflix through my Apple TV -
"charging is not supported" when using the cable that came with ipod
I get an error message that "charging is not supported" when plugged in using the only cable that came with my ipod touch. My ipod will charge for 5 minutes then when I check on it, I notice this error on screen and the ipod has stopped charging. I'm using the same charging method I have always used since I owned this ipod which has been over 2 years now and this only started happening recently. I believe this started when I upgraded to 5.0.1.
- Look at both partsof the 30 pin dock connector. Log for bent. mising or corroded contacts of orther abnormalities. The cable could be bad. Try a new one.
- Try a reset. Nothings is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?
- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button? -
IPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync
iPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync with official apple lightening cable.
It worked for almost a year then suddenly began to say that. My computer [windows], lightening cable and my power brick [all apple official] are all the same as they were when it was working. The iPod is almost a year old now, and has worked perfectly up until about a week ago.
I have tried resetting the iPod, plugging it into different charging sources but it keeps saying "Unsupported. Accessory is not supported"
Does anyone have any ideas on how to fix it?
Thanks.Your iPod Nano firmware and iTunes updated to the current versions?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. -
I have a vizio led 26" but displays not support when I connect to my MacBook pro
I have a vizio led 26" but displays not support when I connect to my MacBook pro
Hello, Benlot.
You may find this article helpful in troubleshooting the external display issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H. -
Keepgettimg accessory not supported when charging in romania. I have all the correct connections. ie wall converter, USB cord etc.
If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
So, are you able to confirm you have a working connection between the Mac and printer? -
Why charger saying not supported when it is a genuine apple charger
Why charger saying not supported when it is a genuine apple charger
Do you mean the AC wall adapter or the cable when you say "charger"? Neither is a charger; the charger is built into the phone. You need to do some basic troubleshooting. First, try a different cable with the same AC adapter. Then try a different USB source such as the USB port on your computer. If you get the same message after both tests the problem lies in the phone. The most common cause of this message is dirt, moisture or pocket lint in the lightning connector on the bottom of the phone. Inspect it with a bright light and clean it with a plastic or wood toothpick. If none of these steps resolve the problem take the phone, cable and adapter to an Apple store for diagnosis. Make an appointment first: http://concierge.apple.com/reservation/us/en/techsupport/
Note: You should register the iPhone on Apple's website first, if it isn't already registered: https://supportprofile.apple.com/. This will speed up the appointment process. -
Why does phone say "this device not supported" when charging
why does phone say "this device not supported" when charging?
If it is clean connect a 2nd accessory of the same kind to see if you need to replace the accessory or continue troubleshooting the phone.
-
when i charged my iphone on y pc after some time showing charger not supported with this accessory what have to do to solve it
If you did not do a reset of your iPod please try that (you will not lose any data)
Reset iPod touch: Press and hold the On/Off button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If this does not work inspect the opening in your iPod where the cable connects. Look for any debris and clean it (a magnifying glass may be required). -
I have an MC694IPOD NANO 6TH GENERATION which works with Bose dock2 , I also have MC526IPOD NANO 6TH GENERATION which can charge via the bose dock2 but displays 'accessory not supported' ...why is this ? and can it be rectified?
The AirPort Extreme should work fine with BT Infinity (as it works with Virgin Media).
-
on my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix
Clean the iPhone charging port with a clean dry toothbrush.
-
I'm having trouble with the wi-fi synch for iTunes and would be happy if I could just synch by the USB cable. With the new iOS, the connection to iTunes seems to get broken every time the dreaded "charging not supported with this accessory" appears, which is only a few seconds into the synch. Since my PC is obviously not an Apple brand charger, IPod won't stop producing this message. Using the Dismiss button doesn't resolve the issue because synch has already stopped. It looks like the hardwire to PC option is now dead.
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Tv not supported when connecting HDMI to ipad 30 pin connector running ios 8
tv not supported when connecting HDMI to ipad-2 30 pin connector running ios 8. Was working fine with ios 7.
Hello,
I need to conect it to either a mouse or an OLED display to transfer the content I was going to use thee standard charging USB to a port splitter and sending it from there but I wanted to check before I did something stupid.
Thanks.
James
Maybe you are looking for
-
No Folders being found by Itunes
Hi Have just upgraded my Itunes to V 9.2.1.5 - Now none of my files are being found and displayed in Itunes. I have changed the location using Edit/Preferences to point to the location of my old Itunes folder. These folders are fine - they are not em
-
Several html widgets I created contain the javascript libraries. Is there a way to create a common javascript library that can be accessed by all my widgets? I'm trying to reduce the size of the ibook I'm creating.
-
My email message disappears off the page before it is sent or saved.
Sometimes my email message disappears (zooms to the right) before it is sent or saved (I use Safari). How can I retrieve that message?
-
Hypothetical. If person leaves BT broadband is there a way to keep the BT address ? Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World Someone Solved Your Question? Please let other members know by clicking on 'Mark as Accepted Solution' He
-
Spot Fake Breitling Watches, Spot Fake Rolex
Because the Nineties, many experts have witnessed that men and women get fantastic adoration for sporting popular gowns along with clothes. Because of this interest, these are prepared to invest any lion’azines reveal with their cash flow purchasing